Skip to contentSkip to conversation

SB PRo compatible with no valid driver

DISCUSSION Karim Yaghmour 2 participants 3 messages May 14, 1999 – May 18, 1999 Sound

lore
Share & tools
lore
#0 lore raw

Hello,

I just got a notebook that has SB Pro compatible card (Don't they all :) ). To make long stories short, it doesn't work with any driver configuration I've seen on the linux laptop pages or in linux/Documentation/sound/
In windows it says that it's Sound Blaster Pro compatible at 0x220 with irq 5. I also know that there's a yamaha synthesizer chip (read OPL3 compatible).

Now, even if I load only the uart401 and sb with the right paraemeters, I always get :
... 'dev/dsp': Device or resource busy when I try to write. And when I try to read using:
more /dev/dsp
I get :
Sound: DMA (input) timed out - ....

I've tried all sort of things but nothing works. I know that previous models of the notebook used the YMF715. That means I should use OPL3-SA2, but that doesn't work. It actually detects one, but when it tries to check some stuff, it fails in step B of ad1848_detect. I get :
ad1848 detect error - step B (ff/ff)
when loading it at 0x220 (if I try any other address it fails at step A).

Anyways, does anyone has an idea on how to solve this or even where to start in order to investigate on whether this is a new "unknown" card?

Thanx in advance!

=======================
Karim Yaghmour
[email protected]
Computer Engineer
Ecole Polytechnique de Montreal
=======================

#1 lore raw
Quoted 11 lines · Karim Yaghmour

Hello,

I just got a notebook that has SB Pro compatible card (Don't they all :) ). To make long stories short, it doesn't work with any driver configuration I've seen on the linux laptop pages or in linux/Documentation/sound/
In windows it says that it's Sound Blaster Pro compatible at 0x220 with irq 5. I also know that there's a yamaha synthesizer chip (read OPL3 compatible).

Quoted 3 lines

Now, even if I load only the uart401 and sb with the right paraemeters, I always get :
... 'dev/dsp': Device or resource busy

Karim,

this is the error I kept getting due to bios not making the irq available. Try loading the module with an irq above those being used. I moved mine to 9 and haven't had that problem since then.

ciao,

der.hans

<schnipp, schnapp>

Quoted 9 lines

Thanx in advance!

=======================
Karim Yaghmour
[email protected]
Computer Engineer
Ecole Polytechnique de Montreal
=======================

# +++++++++++=================+++++++++++ #

#                   [email protected]                      #
#            http://home.pages.de/~lufthans/              #
#             I've got a photographic memory,             #
#         but I'm lousy photographer. - der.hans          #

# ======+++++++++++++++++++++++++++++++++====== #

#2 lore raw
In reply to Karim Yaghmour
Quoted 6 lines · LuftHans

Karim,

this is the error I kept getting due to bios not making the irq available. Try loading the module with an irq above those being used. I moved mine to 9 and haven't had that problem since then.

I did try this, among many other things, but it seems that the BIOS simply doesn't give anything for the sound card. Supposedly it's a Plug-and-Play so I tried "pnpdump" but that doesn't find anything at all. What bewilders me is the fact that windows has no problem with the card!

=======================
Karim Yaghmour
[email protected]
Computer Engineer
Ecole Polytechnique de Montreal
=======================