Skip to contentSkip to conversation

setting up sblive

DISCUSSION Abe Smith 2 participants 3 messages Jul 23, 1999 Sound

lore
Share & tools
lore

Abe Smith

author
#0 lore raw

I apologize in advance for the foolishness of this question:

I'm trying to use an SB Live! on a P133 with 128M running redhat 5.2 (kernel 2.0.36-0.7)
I was previously using a quirky sb16

I'm trying to get Creative's v0.2 beta driver to work, and the install process claims to work, and have tried the "manual" method as well (as per the INSTALL file). The card doesn't even seem to be recognized on boot, and of course, none of the audio devices work.

are there any thing obvious that I'm missing?
I've neve really dealt with modular kernels before.. anything I'm missing there?
might the v0.3 driver work, even with my slower CPU, etc?

thanks

Signature · 2 lines
Abraham D. Smith   <[email protected]>  Wisconsin, USA
--------------------------------------------------------
#1 lore raw

On Thu, 22 Jul 1999, Abe Smith wrote:
I have about the same setup except a K6-2 350mhz I have the 0.3 driver. I havent' got everyting to work yet either. It may be a week or two before I get
a chance to try a recompile of the kernel. My problem I think is that there
are still some leftover modules still hanging around. I believe it will work, we are just not doing something right yet.

Quoted 6 lines

I apologize in advance for the foolishness of this question:
I'm trying to use an SB Live! on a P133 with 128M running redhat 5.2 (kernel 2.0.36-0.7)
I was previously using a quirky sb16

I'm trying to get Creative's v0.2 beta driver to work, and the install

Try the v0.3

process claims to work, and have tried the "manual" method as well (as

Quoted 2 lines

per the INSTALL file). The card doesn't even seem to be recognized on boot, and of course, none of the audio devices work.

My card is recognized on boot and I can get CD's and MP3's to play. Haven't
been able to get the digital I/O or the MIDI working. Thanks
Karl

Quoted 1 line

are there any thing

obvious that I'm missing? > I've neve really dealt with modular kernels before.. anything I'm > missing there?

Quoted 9 lines

might the v0.3 driver work, even with my slower CPU, etc?

thanks

Signature · 2 lines
Abraham D. Smith   <[email protected]>  Wisconsin, USA
--------------------------------------------------------
author
#2 lore raw
In reply to Abe Smith

Well, I found that if I blasted all the modules, recompiled the kernel and modules (making sure to put both sound /and/ OSS-type boards as modular), basic sound works... no midi yet...

Quoted 7 lines · Karl

On Thu, 22 Jul 1999, Abe Smith wrote:
I have about the same setup except a K6-2 350mhz I have the 0.3 driver. I havent' got everyting to work yet either. It may be a week or two before I get
a chance to try a recompile of the kernel. My problem I think is that there
are still some leftover modules still hanging around. I believe it will work, we are just not doing something right yet.

Signature · 2 lines
Abraham D. Smith   <[email protected]>  Wisconsin, USA
--------------------------------------------------------