Sound Blasters
I use a plug-n-pray SB awe64, and it works fine. I also have a SB pci 128 that works fine, except that realplayer g2 doesnt like the pci 128 card. dont let PNP discourage you from buying an inexpensive card. Just dont buy a 'winsound card' if there is such a thing.
Quoted 11 lines · Scorpion
I went down to a few computer stores to try and buy me a decent sound card. I've never been able to get my soundcard to work fully with Linux, so I wanted to buy a new one. One I knew would work with Linux. I wanted to get a Sound Blaster 16. They had a few cards down there, but most where over $100. They had a Sound Blaster 16 pci there for $50, and I almost bought it. Started to read the package, and noticed it was plug and play. I put it back and left. Would it be possible to get that thing to work? If not, got any suggestions for good quality lower priced sound cards? In case you need to know, I'm using the kernel 2.2.10.
Thanks.
--
- "Peace cannot be kept by force. It can only be achieved by understanding."
- "Whoever undertakes to set himself up as judge in the field of truth and knowledge is shipwrecked by the
laughter of the Gods." -A. Einstein
Quoted 6 lines · llornkcor
I use a plug-n-pray SB awe64, and it works fine. I also have a SB pci 128 that works fine, except that realplayer g2 doesnt like the pci 128 card. dont let PNP discourage you from buying an inexpensive card. Just dont buy a 'winsound card' if there is such a thing.
I've also a SN pci 128 and I'm using kernel 2.2.10 (Debian 2.1). But my sound doesn't works. How dit you configure it ?
Signature · 1 line
Bart
I bought a sound driver from OSS-
http://www.opensound.com/
:o)
Quoted 15 lines · Bart Van Gelder
Quoted 6 lines · llornkcor
I use a plug-n-pray SB awe64, and it works fine. I also have a SB pci 128 that works fine, except that realplayer g2 doesnt like the pci 128 card. dont let PNP discourage you from buying an inexpensive card. Just dont buy a 'winsound card' if there is such a thing.
I've also a SN pci 128 and I'm using kernel 2.2.10 (Debian 2.1). But my sound doesn't works. How dit you configure it ?
Signature · 1 line
Bart
--
- "Peace cannot be kept by force. It can only be achieved by understanding."
- "Whoever undertakes to set himself up as judge in the field of truth and knowledge is shipwrecked by the
laughter of the Gods." -A. Einstein
Quoted 6 lines · llornkcor
I use a plug-n-pray SB awe64, and it works fine. I also have a SB pci 128 that works fine, except that realplayer g2 doesnt like the pci 128 card. dont let PNP discourage you from buying an inexpensive card. Just dont buy a 'winsound card' if there is such a thing.
Thanks. I'll go ahead and get it.
If you do get the SB AWE64 my config page might help:
http://www.fe88.dial.pipex.com/awe64config.shtml
Best of luck
Regards
Signature · 5 lines
Steve Crowder [email protected] SMP Linux 2.3.5ac1 RedHat 6.0 ALSA 0.4.0 AlsaPlayer 0.99.21 http://www.fe88.dial.pipex.com/index.shtml
Quoted 5 lines
Quoted 3 lines
If you do get the SB AWE64 my config page might help:
I just want the 16, good enough for me.
I think you misunderstand - there is SB 16 ISA, SB 16 PCI (something like SB 128 PCI?, you want to buy it) and SB AWE64 ISA. You said you "wanted to get a Sound Blaster 16", so I think you talked about ISA version, because it works very well with Linux. Be careful with PCI... it might be difficult to setup. SB ISA cards are out of production and you can get them very cheap.
Quoted 1 line · llornkcor
I use a plug-n-pray SB awe64, and it works fine.
Me too.
I hate to add this except that SBawe64s are so cheap these days. I last bought one for around $35.
Signature · 5 lines
_Deirdre * http://www.linuxcabal.net * http://www.deirdre.net Indeed, when I design my killer language, the identifiers "foo" and "bar" will be reserved words, never used, and not even mentioned in the reference manual. Any program using one will simply dump core without comment. Multitudes will rejoice. -- Tim Peters
Speaking of which, where do you find them?
Quoted 15 lines · Deirdre Saoirse
Quoted 1 line · llornkcor
I use a plug-n-pray SB awe64, and it works fine.
Me too.
I hate to add this except that SBawe64s are so cheap these days. I last bought one for around $35.
Signature · 5 lines
_Deirdre * http://www.linuxcabal.net * http://www.deirdre.net Indeed, when I design my killer language, the identifiers "foo" and "bar" will be reserved words, never used, and not even mentioned in the reference manual. Any program using one will simply dump core without comment. Multitudes will rejoice. -- Tim Peters
Signature · 2 lines
Abraham D. Smith <[email protected]> Wisconsin, USA --------------------------------------------------------
Quoted 1 line · Abe Smith
Speaking of which, where do you find them?
I buy them at local computer swaps. Most cities have them. Face it, you don't need the software or the box for Linux, so OEM versions are perfect.
Signature · 5 lines
_Deirdre * http://www.linuxcabal.net * http://www.deirdre.net Indeed, when I design my killer language, the identifiers "foo" and "bar" will be reserved words, never used, and not even mentioned in the reference manual. Any program using one will simply dump core without comment. Multitudes will rejoice. -- Tim Peters
Quoted 8 lines · Scorpion
Quoted 3 lines · Nerijus
You said you "wanted to get a Sound Blaster 16", so I think you talked about ISA version, because it works very well with Linux. Be careful with PCI... it might be difficult to setup.
I originally wanted the ISA, but all they had down there was the PCI and that's what I want to know more about. What about the wavetable one?
I would probably recommend a SB 64 ISA AWE card. After I bought the SB 16 waveffects ISA, I found that everywhere I checked for info on how to config it they recommended the SB 64 ISA AWE. AFAICT, it has a wavetable built in and you cand expand its memory. With a slow computer like mine, you'll soon wish that the expansion hardware (like the soundcard) is fully capable of handling its own stuff.
I'm able to play WAV files and the lousy MIDI that's built in. Beep, beep.. OK, so maybe you get what you pay for... :-)
I've never tried recording with my sound card. Any views on recording with these card folks?
Roy
#### Unsolicited commercial email with be billed at $350/message #### Roy Larsen, [email protected]
To send me an email remove the `nospam.' part from the address.
Hi
I would get a sb pci 64 or pci 128. I have used both and they are much easier to setup than isa cards. Just stick it in and modprobe es1370 or modprobe es1371. They are very good for the price.
--
Rob Murray