Skip to contentSkip to conversation

PCI 512 Working and printing problems

DISCUSSION OHPC 2 participants 2 messages Dec 8, 1999 Sound

lore
Share & tools
lore

OHPC

author
#0 lore raw

I think I should share my experience with everybody.
I am really a newbie to Linux, but have used computers everyday for 6 years, but my first computers were Apple II, Spectrum and MSX, so I am pretty much accustomed to them.
Linux is great, although a little difficult to use for newbies. But no pain, no gain, right?
I managed to use my SundBlaster PCI512 with my Linux (a Portuguese version that has support for the RivaTNT2 - which version could it be really? A port of the RH 6.1?) by compiling the SB Live! drivers.
It was really difficult to compile, because I don't really know how to compile anything (and of course I can't compile the kernel too), but I managed after all and included some lines in the conf.modules. If anybody wants to use this soundboard, it will sure work with the SB Live drivers.
My printer, however, won't print anything. I have a HP820, tried to use the HP 5XX and 6XX drivers, and use the lp port. But it will not print. Can anybody help me?

Greetings to all!

OHPC

#1 lore raw

First lesson for a self-proclaimed "really a newbie" -- to get help with problems, you have to describe them in some detail. "But it will not print" isn't very informative; it doesn't even tell us which of the many possible ways of printing you tried. So ... I suspect the last entry on my list below is your answer, but I'm leaving the others in because they give you some step-by-step guidence in how to analyze printer problems under Linux.

1. What is "lp"? It is usually the default entry in /etc/printcap, but what printer does it select and what actual /dev/lp* device does it point to? Is it the right device?

2. If you try to print by directing a text file directly to the device, what happens? You do this with a command something like

cat somefile > /dev/lp1

3. If you try to print using lpr, what happens? What error message is returned? I mean a command something like

lpr somefile

4. As to drivers, the most authoritative source I know for this information is http://www.picante.com/~gtaylor/pht/printer_list.cgi . I can't find an "HP820" on the list, but there is an HP "Deskjet 820C" listed as working "partially" with Linux, requiring the "pbm2ppa" driver. Since this printer is a PPA printer and the 500 and 600 sries are PCL printers, the drivers you've tried so far are unlikely to be helpful. Consult the above URL for more information.

PS - If you can't report your distribution and version of Linux exactly, you should at least mention the kernel version - "uname -a" will give you this and other descriptive information. At the most comprehensive distribution site I know (http://kernelnotes.org/dist-index.html - does anyone have other candidates?), there were no Portugese distributions listed, but there was one Brazilian one called "Conectiva" that is based on Red Hat. Is that what you are using, perhaps?

At 10:10 AM 12/8/99 -0200, OHPC wrote [in part]:

Quoted 3 lines

My printer, however, won't print anything. I have a HP820, tried to use the HP 5XX and 6XX drivers, and use the lp port. But it will not print. Can anybody help me?

------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
Palo Alto, CA [email protected]
----------------------------------------------------------------