no sound

Hello list:

I have a laptop toshiba satellite 2540CDS which uses a yamaha opl3-sax
wdm sound card, how can i make it works?

I have linux redhat 6.2.

I´ve tried with oss, but isn´t supported.

      Regards
      Wackode....!

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

Hi wackode!

Try the following in the kernel:

<M> Sound card support
<M> OSS sound modules
<M> MPU-401 support (NOT for SB16)
<M> Microsoft Sound System support
<M> Support for Yamaha OPL3-SA2, SA3, and SAx based PnP cards <M> Yamaha OPL3-SA1 audio controller
<M> FM synthesizer (YM3812/OPL-3) support

and put this lines into the /etc/modules.conf file:

alias sound-slot-0 ad1848
alias sound-slot-0 opl3sa2
options sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options opl3sa2 mss_io=0x530 irq=9 dma=1 dma2=0 mpu_io=0x330 io=0x370

It could be that you must set the irq and dma in your BIOS.

Cu
Rainer

PS: Also have a look at my Homepage http://www.konqui.de

 http://www.konqui.de ** PGP PUBLIC KEY AVAILABLE ON REQUEST