2.6.30-rc2-git2: Reported regressions from 2.6.29
Subsystems (13)
PATCH 2/5 PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
The next patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move swsusp_shrink_memory() from kernel/power/swsusp.c to kernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local to kernel/power/snapshot.c .
[rev. 2: Make some functions static and remove their headers from
kernel/power/power.h]
--- kernel/power/power.h | 4 -- kernel/power/snapshot.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++-- kernel/power/swsusp.c | 76 --------------------------------------------- 3 files changed, 79 insertions(+), 81 deletions(-)
kernel/power/snapshot.c +78 -2
@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct pastatic void swsusp_set_page_forbidden (struct page *);static void swsusp_unset_page_forbidden (struct page *); +/* +* Preferred image size in bytes (tunable via /sys/power/image_size). +* When it is set to N, swsusp will do its best to ensure the image +* size will not exceed N bytes, but if that is impossible, it will +* try to create the smallest image possible. +*/ +unsigned long image_size =500 *1024 *1024 ; +/* List of PBEs needed for restoring the pages that were allocated before * the suspend and included in the suspend image, but have also been * allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_pag* pages. */ -unsigned int count_highmem_pages (void ) +static unsigned int count_highmem_pages (void ) {struct zone *zone;unsigned int n =0 ;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct* pages. */ -unsigned int count_data_pages (void ) +static unsigned int count_data_pages (void ) {struct zone *zone;unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void) buffer =NULL ; } +/** +* swsusp_shrink_memory - Try to free as much memory as needed +* +* ... but do not OOM-kill anyone +* +* Notice: all userland should be stopped before it is called, or +* livelock is possible. +*/ + +#define SHRINK_BITE 10000 +static inline unsigned long __shrink_memory (long tmp) +{ +if (tmp >SHRINK_BITE ) + tmp =SHRINK_BITE ; +return shrink_all_memory (tmp); +} + +int swsusp_shrink_memory (void ) +{ +long tmp; +struct zone *zone; +unsigned long pages =0 ; +unsigned int i =0 ; +char *p ="-\\|/" ; +struct timeval start, stop; + +printk (KERN_INFO "PM: Shrinking memory... " ); +do_gettimeofday (&start); +do { +long size, highmem_size; + + highmem_size =count_highmem_pages (); + size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES ; + tmp = size; + size += highmem_size; +for_each_populated_zone (zone) { + tmp +=snapshot_additional_pages (zone); +if (is_highmem (zone)) { + highmem_size -= +zone_page_state (zone,NR_FREE_PAGES ); + }else { + tmp -=zone_page_state (zone,NR_FREE_PAGES ); + tmp += zone->lowmem_reserve[ZONE_NORMAL ]; + } + } + +if (highmem_size <0 ) + highmem_size =0 ; + + tmp += highmem_size; +if (tmp >0 ) { + tmp =__shrink_memory (tmp); +if (!tmp) +return -ENOMEM ; + pages += tmp; + }else if (size > image_size /PAGE_SIZE ) { + tmp =__shrink_memory (size - (image_size /PAGE_SIZE )); + pages += tmp; + } +printk ("\b%c" , p[i++%4 ]); + }while (tmp >0 ); +do_gettimeofday (&stop); +printk ("\bdone (%lu pages freed)\n" , pages); +swsusp_show_speed (&start, &stop, pages,"Freed" ); + +return 0 ; +} +#ifdef CONFIG_HIGHMEM /** * count_pages_for_highmem - compute the number of non-highmem pages
kernel/power/swsusp.c +0 -76
88 lines not on this page · raw message
kernel/power/power.h +1 -3
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resumeextern int create_basic_memory_bitmaps (void );extern void free_basic_memory_bitmaps (void ); -extern unsigned int count_data_pages (void ); +extern int swsusp_shrink_memory (void );/** * Auxiliary structure used for reading the snapshot image data and
@@ -149,7 +149,6 @@ extern int swsusp_swap_in_use(void);/* kernel/power/disk.c */ extern int swsusp_check (void ); -extern int swsusp_shrink_memory (void );extern void swsusp_free (void );extern int swsusp_read (unsigned int *flags_p);extern int swsusp_write (unsigned int flags);
@@ -176,7 +175,6 @@ extern int pm_notifier_call_chain(unsign#endif #ifdef CONFIG_HIGHMEM -unsigned int count_highmem_pages (void );int restore_highmem (void );#else static inline unsigned int count_highmem_pages (void ) {return 0 ; }
Re: [PATCH 2/5] PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
Quoted 10 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
The next patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move
swsusp_shrink_memory()fromkernel/power/swsusp.ctokernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local tokernel/power/snapshot.c.
Quoted 4 lines
[rev. 2: Make some functions static and remove their headers from
kernel/power/power.h]Signed-off-by Rafael J. Wysocki <[email protected]>
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 2/5] PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
In reply to Rafael J. WysockiQuoted 10 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
The next patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move
swsusp_shrink_memory()fromkernel/power/swsusp.ctokernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local tokernel/power/snapshot.c.
Quoted 4 lines
[rev. 2: Make some functions static and remove their headers from
kernel/power/power.h]Signed-off-by Rafael J. Wysocki <[email protected]>
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 2/5 PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
The next patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move swsusp_shrink_memory() from kernel/power/swsusp.c to kernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local to kernel/power/snapshot.c .
[rev. 2: Make some functions static and remove their headers from
kernel/power/power.h]
--- kernel/power/power.h | 4 -- kernel/power/snapshot.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++-- kernel/power/swsusp.c | 76 --------------------------------------------- 3 files changed, 79 insertions(+), 81 deletions(-)
kernel/power/snapshot.c +78 -2
@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct pastatic void swsusp_set_page_forbidden (struct page *);static void swsusp_unset_page_forbidden (struct page *); +/* +* Preferred image size in bytes (tunable via /sys/power/image_size). +* When it is set to N, swsusp will do its best to ensure the image +* size will not exceed N bytes, but if that is impossible, it will +* try to create the smallest image possible. +*/ +unsigned long image_size =500 *1024 *1024 ; +/* List of PBEs needed for restoring the pages that were allocated before * the suspend and included in the suspend image, but have also been * allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_pag* pages. */ -unsigned int count_highmem_pages (void ) +static unsigned int count_highmem_pages (void ) {struct zone *zone;unsigned int n =0 ;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct* pages. */ -unsigned int count_data_pages (void ) +static unsigned int count_data_pages (void ) {struct zone *zone;unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void) buffer =NULL ; } +/** +* swsusp_shrink_memory - Try to free as much memory as needed +* +* ... but do not OOM-kill anyone +* +* Notice: all userland should be stopped before it is called, or +* livelock is possible. +*/ + +#define SHRINK_BITE 10000 +static inline unsigned long __shrink_memory (long tmp) +{ +if (tmp >SHRINK_BITE ) + tmp =SHRINK_BITE ; +return shrink_all_memory (tmp); +} + +int swsusp_shrink_memory (void ) +{ +long tmp; +struct zone *zone; +unsigned long pages =0 ; +unsigned int i =0 ; +char *p ="-\\|/" ; +struct timeval start, stop; + +printk (KERN_INFO "PM: Shrinking memory... " ); +do_gettimeofday (&start); +do { +long size, highmem_size; + + highmem_size =count_highmem_pages (); + size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES ; + tmp = size; + size += highmem_size; +for_each_populated_zone (zone) { + tmp +=snapshot_additional_pages (zone); +if (is_highmem (zone)) { + highmem_size -= +zone_page_state (zone,NR_FREE_PAGES ); + }else { + tmp -=zone_page_state (zone,NR_FREE_PAGES ); + tmp += zone->lowmem_reserve[ZONE_NORMAL ]; + } + } + +if (highmem_size <0 ) + highmem_size =0 ; + + tmp += highmem_size; +if (tmp >0 ) { + tmp =__shrink_memory (tmp); +if (!tmp) +return -ENOMEM ; + pages += tmp; + }else if (size > image_size /PAGE_SIZE ) { + tmp =__shrink_memory (size - (image_size /PAGE_SIZE )); + pages += tmp; + } +printk ("\b%c" , p[i++%4 ]); + }while (tmp >0 ); +do_gettimeofday (&stop); +printk ("\bdone (%lu pages freed)\n" , pages); +swsusp_show_speed (&start, &stop, pages,"Freed" ); + +return 0 ; +} +#ifdef CONFIG_HIGHMEM /** * count_pages_for_highmem - compute the number of non-highmem pages
kernel/power/swsusp.c +0 -76
88 lines not on this page · raw message
kernel/power/power.h +1 -3
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resumeextern int create_basic_memory_bitmaps (void );extern void free_basic_memory_bitmaps (void ); -extern unsigned int count_data_pages (void ); +extern int swsusp_shrink_memory (void );/** * Auxiliary structure used for reading the snapshot image data and
@@ -149,7 +149,6 @@ extern int swsusp_swap_in_use(void);/* kernel/power/disk.c */ extern int swsusp_check (void ); -extern int swsusp_shrink_memory (void );extern void swsusp_free (void );extern int swsusp_read (unsigned int *flags_p);extern int swsusp_write (unsigned int flags);
@@ -176,7 +175,6 @@ extern int pm_notifier_call_chain(unsign#endif #ifdef CONFIG_HIGHMEM -unsigned int count_highmem_pages (void );int restore_highmem (void );#else static inline unsigned int count_highmem_pages (void ) {return 0 ; }
PATCH 3/5 PM/Suspend: Do not shrink memory before suspend
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary.
--- kernel/power/main.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-)
kernel/power/main.c +1 -19
@@ -188,9 +188,6 @@ static void suspend_test_finish(const ch#endif -/* This is just an arbitrary number */ -#define FREE_PAGE_NUMBER (100) -static struct platform_suspend_ops *suspend_ops;/**
@@ -226,7 +223,6 @@ int suspend_valid_only_mem(suspend_statestatic int suspend_prepare (void ) {int error; -unsigned int free_pages;if (!suspend_ops || !suspend_ops->enter)return -EPERM ;
@@ -241,24 +237,10 @@ static int suspend_prepare(void)if (error) goto Finish; -if (suspend_freeze_processes ()) { - error = -EAGAIN ; - goto Thaw; - } - - free_pages =global_page_state (NR_FREE_PAGES ); -if (free_pages <FREE_PAGE_NUMBER ) { -pr_debug ("PM: free some memory\n" ); -shrink_all_memory (FREE_PAGE_NUMBER - free_pages); -if (nr_free_pages () <FREE_PAGE_NUMBER ) { - error = -ENOMEM ; -printk (KERN_ERR "PM: No enough memory\n" ); - } - } + error =suspend_freeze_processes ();if (!error)return 0 ; - Thaw:suspend_thaw_processes ();usermodehelper_enable (); Finish:
PATCH 3/5 PM/Suspend: Do not shrink memory before suspend
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary.
--- kernel/power/main.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-)
kernel/power/main.c +1 -19
@@ -188,9 +188,6 @@ static void suspend_test_finish(const ch#endif -/* This is just an arbitrary number */ -#define FREE_PAGE_NUMBER (100) -static struct platform_suspend_ops *suspend_ops;/**
@@ -226,7 +223,6 @@ int suspend_valid_only_mem(suspend_statestatic int suspend_prepare (void ) {int error; -unsigned int free_pages;if (!suspend_ops || !suspend_ops->enter)return -EPERM ;
@@ -241,24 +237,10 @@ static int suspend_prepare(void)if (error) goto Finish; -if (suspend_freeze_processes ()) { - error = -EAGAIN ; - goto Thaw; - } - - free_pages =global_page_state (NR_FREE_PAGES ); -if (free_pages <FREE_PAGE_NUMBER ) { -pr_debug ("PM: free some memory\n" ); -shrink_all_memory (FREE_PAGE_NUMBER - free_pages); -if (nr_free_pages () <FREE_PAGE_NUMBER ) { - error = -ENOMEM ; -printk (KERN_ERR "PM: No enough memory\n" ); - } - } + error =suspend_freeze_processes ();if (!error)return 0 ; - Thaw:suspend_thaw_processes ();usermodehelper_enable (); Finish:
PATCH 4/5 PM/Hibernate: Use memory allocations to free memory (rev. 3)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Modify the hibernation memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. Remove the no longer used memory shrinking functions from mm/vmscan.c .
[rev. 2: Use the existing memory bitmaps for marking preallocated
image pages and use swsusp_free() from releasing them, add comments describing the memory shrinking strategy.
rev. 3: change the memory shrinking strategy to preallocate as much memory as needed to get the right image size in one shot.]
--- kernel/power/snapshot.c | 119 +++++++++++++++++++++++----------------- mm/vmscan.c | 142 ------------------------------------------------ 2 files changed, 70 insertions(+), 191 deletions(-)
kernel/power/snapshot.c +70 -49
@@ -1066,69 +1066,90 @@ void swsusp_free(void) buffer =NULL ; } +/* Helper function used for the shrinking of memory. */ +/** -* swsusp_shrink_memory - Try to free as much memory as needed +* swsusp_shrink_memory - Make the kernel release as much memory as needed +* +* To create a hibernation image it is necessary to make a copy of every page +* frame in use. We also need a number of page frames to be free during +* hibernation for allocations made while saving the image and for device +* drivers, in case they need to allocate memory from their hibernation +* callbacks (these two numbers are given by PAGES_FOR_IO and SPARE_PAGES, +* respectively, both of which are rough estimates). To make this happen, we +* compute the total number of available page frames and allocate at least * -* ... but do not OOM-kill anyone +* ([page frames total] + PAGES_FOR_IO + SPARE_PAGES + [metadata pages]) / 2 * -* Notice: all userland should be stopped before it is called, or -* livelock is possible. +* of them, which corresponds to the maximum size of a hibernation image. +* +* If image_size is set below the number following from the above formula, +* the preallocation of memory is continued until the total number of page +* frames in use is below the requested image size or it is impossible to +* allocate more memory, whichever happens first. */ - -#define SHRINK_BITE 10000 -static inline unsigned long __shrink_memory (long tmp) -{ -if (tmp >SHRINK_BITE ) - tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); -} -int swsusp_shrink_memory (void ) { -long tmp;struct zone *zone; -unsigned long pages =0 ; -unsigned int i =0 ; -char *p ="-\\|/" ; +unsigned long saveable, size, max_size, count, pages =0 ;struct timeval start, stop; +int error =0 ; -printk (KERN_INFO "PM: Shrinking memory... " ); +printk (KERN_INFO "PM: Shrinking memory ... " );do_gettimeofday (&start); -do { -long size, highmem_size; - highmem_size =count_highmem_pages (); - size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES ; - tmp = size; - size += highmem_size; -for_each_populated_zone (zone) { - tmp +=snapshot_additional_pages (zone); -if (is_highmem (zone)) { - highmem_size -= -zone_page_state (zone,NR_FREE_PAGES ); - }else { - tmp -=zone_page_state (zone,NR_FREE_PAGES ); - tmp += zone->lowmem_reserve[ZONE_NORMAL ]; - } - } +/* Count the number of saveable data pages. */ + saveable =count_data_pages () +count_highmem_pages (); + +/* +* Compute the total number of page frames we can use (count) and the +* number of pages needed for image metadata (size). +*/ + count = saveable; + size =0 ; +for_each_populated_zone (zone) { + size +=snapshot_additional_pages (zone); + count +=zone_page_state (zone,NR_FREE_PAGES ); +if (!is_highmem (zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL ]; + } + +/* Compute the maximum number of saveable pages to leave in memory. */ + max_size = (count - (size +PAGES_FOR_IO +SPARE_PAGES )) /2 ; + size =DIV_ROUND_UP (image_size,PAGE_SIZE ); +if (size > max_size) + size = max_size; +/* +* If the current number of saveable pages is lesser than the maximum, +* we don't need to do anything more. +*/ +if (size > saveable) + goto out; -if (highmem_size <0 ) - highmem_size =0 ; +/* Preallocate memory. */ +for (count -= size; count >0 ; count--) { +struct page *page; - tmp += highmem_size; -if (tmp >0 ) { - tmp =__shrink_memory (tmp); -if (!tmp) -return -ENOMEM ; - pages += tmp; - }else if (size > image_size /PAGE_SIZE ) { - tmp =__shrink_memory (size - (image_size /PAGE_SIZE )); - pages += tmp; - } -printk ("\b%c" , p[i++%4 ]); - }while (tmp >0 ); + page =alloc_image_page (GFP_KERNEL | __GFP_NO_OOM_KILL); +if (!page) +break ; + pages++; + } +/* If size < max_size, preallocating enough memory may be impossible. */ +if (count >0 && size == max_size) + error = -ENOMEM ; + +/* Release all of the preallocated page frames. */ +swsusp_free (); + +if (error) { +printk (KERN_CONT "\n" ); +return error; + } + + out:do_gettimeofday (&stop); -printk ("\bdone (%lu pages freed)\n" , pages); +printk (KERN_CONT "done (preallocated %lu free pages)\n" , pages);swsusp_show_speed (&start, &stop, pages,"Freed" );return 0 ;
mm/vmscan.c +0 -142
148 lines not on this page · raw message
PATCH 4/5 PM/Hibernate: Use memory allocations to free memory (rev. 3)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Modify the hibernation memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. Remove the no longer used memory shrinking functions from mm/vmscan.c .
[rev. 2: Use the existing memory bitmaps for marking preallocated
image pages and use swsusp_free() from releasing them, add comments describing the memory shrinking strategy.
rev. 3: change the memory shrinking strategy to preallocate as much memory as needed to get the right image size in one shot.]
--- kernel/power/snapshot.c | 119 +++++++++++++++++++++++----------------- mm/vmscan.c | 142 ------------------------------------------------ 2 files changed, 70 insertions(+), 191 deletions(-)
kernel/power/snapshot.c +70 -49
@@ -1066,69 +1066,90 @@ void swsusp_free(void) buffer =NULL ; } +/* Helper function used for the shrinking of memory. */ +/** -* swsusp_shrink_memory - Try to free as much memory as needed +* swsusp_shrink_memory - Make the kernel release as much memory as needed +* +* To create a hibernation image it is necessary to make a copy of every page +* frame in use. We also need a number of page frames to be free during +* hibernation for allocations made while saving the image and for device +* drivers, in case they need to allocate memory from their hibernation +* callbacks (these two numbers are given by PAGES_FOR_IO and SPARE_PAGES, +* respectively, both of which are rough estimates). To make this happen, we +* compute the total number of available page frames and allocate at least * -* ... but do not OOM-kill anyone +* ([page frames total] + PAGES_FOR_IO + SPARE_PAGES + [metadata pages]) / 2 * -* Notice: all userland should be stopped before it is called, or -* livelock is possible. +* of them, which corresponds to the maximum size of a hibernation image. +* +* If image_size is set below the number following from the above formula, +* the preallocation of memory is continued until the total number of page +* frames in use is below the requested image size or it is impossible to +* allocate more memory, whichever happens first. */ - -#define SHRINK_BITE 10000 -static inline unsigned long __shrink_memory (long tmp) -{ -if (tmp >SHRINK_BITE ) - tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); -} -int swsusp_shrink_memory (void ) { -long tmp;struct zone *zone; -unsigned long pages =0 ; -unsigned int i =0 ; -char *p ="-\\|/" ; +unsigned long saveable, size, max_size, count, pages =0 ;struct timeval start, stop; +int error =0 ; -printk (KERN_INFO "PM: Shrinking memory... " ); +printk (KERN_INFO "PM: Shrinking memory ... " );do_gettimeofday (&start); -do { -long size, highmem_size; - highmem_size =count_highmem_pages (); - size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES ; - tmp = size; - size += highmem_size; -for_each_populated_zone (zone) { - tmp +=snapshot_additional_pages (zone); -if (is_highmem (zone)) { - highmem_size -= -zone_page_state (zone,NR_FREE_PAGES ); - }else { - tmp -=zone_page_state (zone,NR_FREE_PAGES ); - tmp += zone->lowmem_reserve[ZONE_NORMAL ]; - } - } +/* Count the number of saveable data pages. */ + saveable =count_data_pages () +count_highmem_pages (); + +/* +* Compute the total number of page frames we can use (count) and the +* number of pages needed for image metadata (size). +*/ + count = saveable; + size =0 ; +for_each_populated_zone (zone) { + size +=snapshot_additional_pages (zone); + count +=zone_page_state (zone,NR_FREE_PAGES ); +if (!is_highmem (zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL ]; + } + +/* Compute the maximum number of saveable pages to leave in memory. */ + max_size = (count - (size +PAGES_FOR_IO +SPARE_PAGES )) /2 ; + size =DIV_ROUND_UP (image_size,PAGE_SIZE ); +if (size > max_size) + size = max_size; +/* +* If the current number of saveable pages is lesser than the maximum, +* we don't need to do anything more. +*/ +if (size > saveable) + goto out; -if (highmem_size <0 ) - highmem_size =0 ; +/* Preallocate memory. */ +for (count -= size; count >0 ; count--) { +struct page *page; - tmp += highmem_size; -if (tmp >0 ) { - tmp =__shrink_memory (tmp); -if (!tmp) -return -ENOMEM ; - pages += tmp; - }else if (size > image_size /PAGE_SIZE ) { - tmp =__shrink_memory (size - (image_size /PAGE_SIZE )); - pages += tmp; - } -printk ("\b%c" , p[i++%4 ]); - }while (tmp >0 ); + page =alloc_image_page (GFP_KERNEL | __GFP_NO_OOM_KILL); +if (!page) +break ; + pages++; + } +/* If size < max_size, preallocating enough memory may be impossible. */ +if (count >0 && size == max_size) + error = -ENOMEM ; + +/* Release all of the preallocated page frames. */ +swsusp_free (); + +if (error) { +printk (KERN_CONT "\n" ); +return error; + } + + out:do_gettimeofday (&stop); -printk ("\bdone (%lu pages freed)\n" , pages); +printk (KERN_CONT "done (preallocated %lu free pages)\n" , pages);swsusp_show_speed (&start, &stop, pages,"Freed" );return 0 ;
mm/vmscan.c +0 -142
148 lines not on this page · raw message
PATCH 5/5 PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]
--- kernel/power/disk.c | 15 +++- kernel/power/power.h | 2 kernel/power/snapshot.c | 157 ++++++++++++++++++++++++++++++------------------ 3 files changed, 112 insertions(+), 62 deletions(-)
kernel/power/snapshot.c +100 -57
@@ -1033,6 +1033,25 @@ copy_data_pages(struct memory_bitmap *costatic unsigned int nr_copy_pages;/* Number of pages needed for saving the original pfns of the image pages */ static unsigned int nr_meta_pages; +/* +* Numbers of normal and highmem page frames allocated for hibernation image +* before suspending devices. +*/ +unsigned int alloc_normal, alloc_highmem; +/* +* Memory bitmap used for marking saveable pages (during hibernation) or +* hibernation image pages (during restore) +*/ +static struct memory_bitmap orig_bm; +/* +* Memory bitmap used during hibernation for marking allocated page frames that +* will contain copies of saveable pages. During restore it is initially used +* for marking hibernation image pages, but then the set bits from it are +* duplicated in @orig_bm and it is released. On highmem systems it is next +* used for marking "safe" highmem pages, but it has to be reinitialized for +* this purpose. +*/ +static struct memory_bitmap copy_bm;/** * swsusp_free - free pages allocated for the suspend.
@@ -1064,12 +1083,16 @@ void swsusp_free(void) nr_meta_pages =0 ; restore_pblist =NULL ; buffer =NULL ; + alloc_normal =0 ; + alloc_highmem =0 ; }/* Helper function used for the shrinking of memory. */ +#define GFP_IMAGE (GFP_KERNEL | __GFP_NO_OOM_KILL) +/** -* swsusp_shrink_memory - Make the kernel release as much memory as needed +* hibernate_preallocate_memory - Preallocate memory for hibernation image * * To create a hibernation image it is necessary to make a copy of every page * frame in use. We also need a number of page frames to be free during
@@ -1088,16 +1111,27 @@ void swsusp_free(void)* frames in use is below the requested image size or it is impossible to * allocate more memory, whichever happens first. */ -int swsusp_shrink_memory (void ) +int hibernate_preallocate_memory (void ) {struct zone *zone;unsigned long saveable, size, max_size, count, pages =0 ;struct timeval start, stop; -int error =0 ; +int error; -printk (KERN_INFO "PM: Shrinking memory ... " ); +printk (KERN_INFO "PM: Preallocating image memory ... " );do_gettimeofday (&start); + error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + alloc_normal =0 ; + alloc_highmem =0 ; +/* Count the number of saveable data pages. */ saveable =count_data_pages () +count_highmem_pages ();
@@ -1130,29 +1164,55 @@ int swsusp_shrink_memory(void)for (count -= size; count >0 ; count--) {struct page *page; - page =alloc_image_page (GFP_KERNEL | __GFP_NO_OOM_KILL); + page =alloc_image_page (GFP_IMAGE );if (!page)break ; - pages++; +memory_bm_set_bit (©_bm,page_to_pfn (page)); +if (PageHighMem (page)) + alloc_highmem++; +else + alloc_normal++; }/* If size < max_size, preallocating enough memory may be impossible. */ if (count >0 && size == max_size) error = -ENOMEM ; +if (error) + goto err_out; -/* Release all of the preallocated page frames. */ -swsusp_free (); +/* Save the number of allocated pages for the statistics below. */ + pages = alloc_normal + alloc_highmem; -if (error) { -printk (KERN_CONT "\n" ); -return error; +/* +* We only need 'size' page frames for the image but we have allocated +* more. Release the excessive ones now. +*/ +memory_bm_position_reset (©_bm); +while (alloc_normal + alloc_highmem > size) { +unsigned long pfn =memory_bm_next_pfn (©_bm); +struct page *page =pfn_to_page (pfn); + +memory_bm_clear_bit (©_bm, pfn); +if (PageHighMem (page)) + alloc_highmem--; +else + alloc_normal--; +swsusp_unset_page_forbidden (page); +swsusp_unset_page_free (page); +__free_page (page); } out:do_gettimeofday (&stop); -printk (KERN_CONT "done (preallocated %lu free pages)\n" , pages); -swsusp_show_speed (&start, &stop, pages,"Freed" ); +printk (KERN_CONT "done (allocated %lu pages, %lu image pages kept)\n" , + pages, size); +swsusp_show_speed (&start, &stop, pages,"Allocated" );return 0 ; + + err_out: +printk (KERN_CONT "\n" ); +swsusp_free (); +return error; }#ifdef CONFIG_HIGHMEM
@@ -1163,7 +1223,7 @@ int swsusp_shrink_memory(void)static unsigned int count_pages_for_highmem (unsigned int nr_highmem) { -unsigned int free_highmem =count_free_highmem_pages (); +unsigned int free_highmem =count_free_highmem_pages () + alloc_highmem;if (free_highmem >= nr_highmem) nr_highmem =0 ;
@@ -1185,19 +1245,17 @@ count_pages_for_highmem(unsigned int nr_static int enough_free_mem (unsigned int nr_pages,unsigned int nr_highmem) {struct zone *zone; -unsigned int free =0 , meta =0 ; +unsigned int free = alloc_normal; -for_each_zone (zone) { - meta +=snapshot_additional_pages (zone); +for_each_zone (zone)if (!is_highmem (zone)) free +=zone_page_state (zone,NR_FREE_PAGES ); - } nr_pages +=count_pages_for_highmem (nr_highmem); -pr_debug ("PM: Normal pages needed: %u + %u + %u, available pages: %u\n" , - nr_pages,PAGES_FOR_IO , meta, free); +pr_debug ("PM: Normal pages needed: %u + %u, available pages: %u\n" , + nr_pages,PAGES_FOR_IO , free); -return free > nr_pages +PAGES_FOR_IO + meta; +return free > nr_pages +PAGES_FOR_IO ; }#ifdef CONFIG_HIGHMEM
@@ -1219,7 +1277,7 @@ static inline int get_highmem_buffer(int*/ static inline unsigned int -alloc_highmem_image_pages (struct memory_bitmap *bm,unsigned int nr_highmem) +alloc_highmem_pages (struct memory_bitmap *bm,unsigned int nr_highmem) {unsigned int to_alloc =count_free_highmem_pages ();
@@ -1230,7 +1288,7 @@ alloc_highmem_image_pages(struct memory_while (to_alloc-- >0 ) {struct page *page; - page =alloc_image_page (__GFP_HIGHMEM); + page =alloc_image_page (__GFP_HIGHMEM | __GFP_NO_OOM_KILL);memory_bm_set_bit (bm,page_to_pfn (page)); }return nr_highmem;
@@ -1239,7 +1297,7 @@ alloc_highmem_image_pages(struct memory_static inline int get_highmem_buffer (int safe_needed) {return 0 ; }static inline unsigned int -alloc_highmem_image_pages (struct memory_bitmap *bm,unsigned int n) {return 0 ; } +alloc_highmem_pages (struct memory_bitmap *bm,unsigned int n) {return 0 ; }#endif /* CONFIG_HIGHMEM */ /**
@@ -1258,51 +1316,36 @@ static int swsusp_alloc(struct memory_bitmap *orig_bm, struct memory_bitmap *copy_bm, unsigned int nr_pages, unsigned int nr_highmem) { - int error; - - error =memory_bm_create (orig_bm,GFP_ATOMIC | __GFP_COLD,PG_ANY ); -if (error) - goto Free; - - error =memory_bm_create (copy_bm,GFP_ATOMIC | __GFP_COLD,PG_ANY ); -if (error) - goto Free; + int error = 0;if (nr_highmem >0 ) { error =get_highmem_buffer (PG_ANY );if (error) - goto Free; - - nr_pages +=alloc_highmem_image_pages (copy_bm, nr_highmem); + goto err_out; +if (nr_highmem > alloc_highmem) { + nr_highmem -= alloc_highmem; + nr_pages +=alloc_highmem_pages (copy_bm, nr_highmem); + } } -while (nr_pages-- >0 ) { -struct page *page =alloc_image_page (GFP_ATOMIC | __GFP_COLD); - -if (!page) - goto Free; +if (nr_pages > alloc_normal) { + nr_pages -= alloc_normal; +while (nr_pages-- >0 ) { +struct page *page; -memory_bm_set_bit (copy_bm,page_to_pfn (page)); + page =alloc_image_page (GFP_ATOMIC | __GFP_COLD); +if (!page) + goto err_out; +memory_bm_set_bit (copy_bm,page_to_pfn (page)); + } } +return 0 ; - Free: + err_out:swsusp_free (); -return -ENOMEM ; +return error; } -/* Memory bitmap used for marking saveable pages (during suspend) or the -* suspend image pages (during resume) -*/ -static struct memory_bitmap orig_bm; -/* Memory bitmap used on suspend for marking allocated pages that will contain -* the copies of saveable pages. During resume it is initially used for -* marking the suspend image pages, but then its set bits are duplicated in -* @orig_bm and it is released. Next, on systems with high memory, it may be -* used for marking "safe" highmem pages, but it has to be reinitialized for -* this purpose. -*/ -static struct memory_bitmap copy_bm; - asmlinkage int swsusp_save(void) {unsigned int nr_pages, nr_highmem;
kernel/power/power.h +1 -1
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resumeextern int create_basic_memory_bitmaps (void );extern void free_basic_memory_bitmaps (void ); -extern int swsusp_shrink_memory (void ); +extern int hibernate_preallocate_memory (void );/** * Auxiliary structure used for reading the snapshot image data and
kernel/power/disk.c +11 -4
@@ -303,8 +303,8 @@ int hibernation_snapshot(int platform_moif (error)return error; -/* Free memory before shutting down devices. */ - error =swsusp_shrink_memory (); +/* Preallocate image memory before shutting down devices. */ + error =hibernate_preallocate_memory ();if (error) goto Close;
@@ -320,6 +320,10 @@ int hibernation_snapshot(int platform_mo/* Control returns here after successful restore */ Resume_devices: +/* We may need to release the preallocated image pages here. */ +if (error || !in_suspend) +swsusp_free (); +device_resume (in_suspend ? (error ?PMSG_RECOVER :PMSG_THAW ) :PMSG_RESTORE );resume_console ();
@@ -593,7 +597,10 @@ int hibernate(void) goto Thaw; error =hibernation_snapshot (hibernation_mode ==HIBERNATION_PLATFORM ); -if (in_suspend && !error) { +if (error) + goto Thaw; + +if (in_suspend) {unsigned int flags =0 ;if (hibernation_mode ==HIBERNATION_PLATFORM )
@@ -605,8 +612,8 @@ int hibernate(void)power_down (); }else {pr_debug ("PM: Image restored successfully.\n" ); -swsusp_free (); } + Thaw:thaw_processes (); Finish:
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]
Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
For you reference, here is the free memory before/after hibernate_preallocate_memory():
# free
total used free shared buffers cached
Mem: 1933 1917 15 0 0 1845
-/+ buffers/cache: 72 1861
Swap: 0 0 0 # free
total used free shared buffers cached
Mem: 1933 920 1012 0 0 356
-/+ buffers/cache: 563 1369
Swap: 0 0 0It seems that the preallocated memory is not freed on -ENOMEM.
+ error = memory_bm_create(&orig_bm, GFP_IMAGE, PG_ANY);
+ if (error)
+ goto err_out;
+
+ error = memory_bm_create(©_bm, GFP_IMAGE, PG_ANY);
+ if (error)
+ goto err_out;
memory_bm_create() is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
+ for_each_populated_zone(zone) {
+ size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone))
+ count -= zone->lowmem_reserve[ZONE_NORMAL];
+ }
Why [ZONE_NORMAL] instead of [zone]? ZONE_NORMAL may not always be the largest zone, for example, My 4GB laptop has a tiny ZONE_NORMAL and a large ZONE_DMA32.
+ /* If size < max_size, preallocating enough memory may be impossible. */
+ if (count > 0 && size == max_size)
+ error = -ENOMEM;
+ if (error)
+ goto err_out;
The two if()s can be merged.
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0
Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.
Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void)
pages, size);
swsusp_show_speed(&start, &stop, pages, "Allocated");
- return 0;
+ return -ENOMEM;
err_out:
printk(KERN_CONT "\n");That "return -ENOMEM" should be "error = -ENOMEM" :-)
Here is one more run:
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)
Now the free report is back to normal:
# free
total used free shared buffers cached
Mem: 1933 74 1858 0 0 15Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 55 lines · Wu Fengguang
Quoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void) pages, size); swsusp_show_speed(&start, &stop, pages, "Allocated"); - return 0; + return -ENOMEM; err_out: printk(KERN_CONT "\n");That "return
-ENOMEM" should be "error =-ENOMEM" :-)Here is one more run:
Quoted 8 lines
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)Now the free report is back to normal:
# free total used free shared buffers cached Mem: 1933 74 1858 0 0 15
Thanks for testing. The results look encouraging, but I'd also like to get rid of the regression mentioned in my previous message.
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 56 lines · Rafael J. Wysocki
Quoted 55 lines · Wu Fengguang
Quoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void) pages, size); swsusp_show_speed(&start, &stop, pages, "Allocated"); - return 0; + return -ENOMEM; err_out: printk(KERN_CONT "\n");That "return
-ENOMEM" should be "error =-ENOMEM" :-)Here is one more run:
Quoted 8 lines
Quoted 8 lines
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)Now the free report is back to normal:
# free total used free shared buffers cached Mem: 1933 74 1858 0 0 15
The above 'free' still exposed something wrong: only 74M memory are left, instead of image_size=500M memory. I'm prepared to test your updated patches :-)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 56 lines · Rafael J. Wysocki
Quoted 55 lines · Wu Fengguang
Quoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void) pages, size); swsusp_show_speed(&start, &stop, pages, "Allocated"); - return 0; + return -ENOMEM; err_out: printk(KERN_CONT "\n");That "return
-ENOMEM" should be "error =-ENOMEM" :-)Here is one more run:
Quoted 8 lines
Quoted 8 lines
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)Now the free report is back to normal:
# free total used free shared buffers cached Mem: 1933 74 1858 0 0 15
The above 'free' still exposed something wrong: only 74M memory are left, instead of image_size=500M memory. I'm prepared to test your updated patches :-)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 55 lines · Wu Fengguang
Quoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void) pages, size); swsusp_show_speed(&start, &stop, pages, "Allocated"); - return 0; + return -ENOMEM; err_out: printk(KERN_CONT "\n");That "return
-ENOMEM" should be "error =-ENOMEM" :-)Here is one more run:
Quoted 8 lines
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)Now the free report is back to normal:
# free total used free shared buffers cached Mem: 1933 74 1858 0 0 15
Thanks for testing. The results look encouraging, but I'd also like to get rid of the regression mentioned in my previous message.
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 28 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0
Quoted 7 lines
# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.
Ah, this was my fault.
I used to do this debugging trick:
@@ -1207,7 +1207,7 @@ int hibernate_preallocate_memory(void)
pages, size);
swsusp_show_speed(&start, &stop, pages, "Allocated");
- return 0;
+ return -ENOMEM;
err_out:
printk(KERN_CONT "\n");That "return -ENOMEM" should be "error = -ENOMEM" :-)
Here is one more run:
[ 194.016991] PM: Preallocating image memory ... done (allocated 383897 pages, 128000 image pages kept) [ 196.505999] PM: Allocated 1535588 kbytes in 2.47 seconds (621.69 MB/s)
Now the free report is back to normal:
# free
total used free shared buffers cached
Mem: 1933 74 1858 0 0 15Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call shrink_all_memory() once with a sufficiently large argument before the preallocation.
Quoted 25 lines
For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?
Possibly, but not right now if you please? This is just moving code BTW.
Quoted 2 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
Quoted 9 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.
Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
Quoted 7 lines
(quoted diff) +5
-0+ /* If size < max_size, preallocating enough memory may be impossible. */ + if (count > 0 && size == max_size) + error = -ENOMEM; + if (error) + goto err_out;The two if()s can be merged.
Unfortunately, the first one is actually wrong. :-)
It's not present in the updated patchset I'm going to send tomorrow.
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
Yes there are some strange behaviors. I tried to populate the page cache with 1/30 mapped file pages and others normal file pages, all referenced once. I get this on "echo disk > /sys/power/state":
[ 462.820098] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 462.827161] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 462.834249] PM: Basic memory bitmaps created [ 462.838631] PM: Syncing filesystems ... done. [ 463.167805] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 463.175738] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 463.183834] PM: Preallocating image memory ... done (allocated 383898 pages, 128000 image pages kept) [ 469.605741] PM: Allocated 1535592 kbytes in 6.41 seconds (239.56 MB/s) [ 469.612325] [ 469.768796] Restarting tasks ... done. [ 469.775044] PM: Basic memory bitmaps freed
Immediately after that, I copied a big sparse file into memory, and get this:
[ 508.097913] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 508.104799] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 508.111702] PM: Basic memory bitmaps created [ 508.116073] PM: Syncing filesystems ... done. [ 509.208608] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 509.216692] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 509.224708] PM: Preallocating image memory ... done (allocated 383872 pages, 128000 image pages kept) [ 520.951882] PM: Allocated 1535488 kbytes in 11.71 seconds (131.12 MB/s)
It's much worse.
Your patches are really interesting exercises for the vmscan code ;-)
Quoted 8 lines
Quoted 8 lines
kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 5 lines
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?Possibly, but not right now if you please? This is just moving code BTW.
OK.
Quoted 5 lines
Quoted 3 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
OK. Just was a wild thought.
Quoted 8 lines
Quoted 8 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }
Quoted 5 lines
Quoted 2 lines
Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
totalreserve_pages could be better. When free memory drops below that threshold(it actually works per zone), kswapd will wake up trying to reclaim pages. If the total reclaimable+free pages are as low as totalreserve_pages, that would drive kswapd mad - scanning the whole zones, trying to squeeze the last pages out of them. Sure kswapd will stop somewhere, but the resulting scan:reclaim ratio would be pretty high and therefore hurt performance.
So we shall stop preallocation when reclaimable pages go down to something like (5*totalreserve_pages). The vmscan mad may come earlier because of unbalanced distributions of reclaimable pages among the zones.
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
OK. Anyway a preallocate based shrinking policy could be far from optimal. I'd suggest to switch to user space directed shrinking via fadvise(DONTNEED), and leave the kernel one a fail safe path. The user space tool could gather page information from the filecache interface which I've been maintaining out of tree, and to drop inactive/active pages from large files first. That should be a better policy at least for rotational disks.
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
Yes there are some strange behaviors. I tried to populate the page cache with 1/30 mapped file pages and others normal file pages, all referenced once. I get this on "echo disk > /sys/power/state":
[ 462.820098] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 462.827161] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 462.834249] PM: Basic memory bitmaps created [ 462.838631] PM: Syncing filesystems ... done. [ 463.167805] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 463.175738] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 463.183834] PM: Preallocating image memory ... done (allocated 383898 pages, 128000 image pages kept) [ 469.605741] PM: Allocated 1535592 kbytes in 6.41 seconds (239.56 MB/s) [ 469.612325] [ 469.768796] Restarting tasks ... done. [ 469.775044] PM: Basic memory bitmaps freed
Immediately after that, I copied a big sparse file into memory, and get this:
[ 508.097913] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 508.104799] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 508.111702] PM: Basic memory bitmaps created [ 508.116073] PM: Syncing filesystems ... done. [ 509.208608] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 509.216692] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 509.224708] PM: Preallocating image memory ... done (allocated 383872 pages, 128000 image pages kept) [ 520.951882] PM: Allocated 1535488 kbytes in 11.71 seconds (131.12 MB/s)
It's much worse.
Your patches are really interesting exercises for the vmscan code ;-)
Quoted 8 lines
Quoted 8 lines
kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 5 lines
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?Possibly, but not right now if you please? This is just moving code BTW.
OK.
Quoted 5 lines
Quoted 3 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
OK. Just was a wild thought.
Quoted 8 lines
Quoted 8 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }
Quoted 5 lines
Quoted 2 lines
Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
totalreserve_pages could be better. When free memory drops below that threshold(it actually works per zone), kswapd will wake up trying to reclaim pages. If the total reclaimable+free pages are as low as totalreserve_pages, that would drive kswapd mad - scanning the whole zones, trying to squeeze the last pages out of them. Sure kswapd will stop somewhere, but the resulting scan:reclaim ratio would be pretty high and therefore hurt performance.
So we shall stop preallocation when reclaimable pages go down to something like (5*totalreserve_pages). The vmscan mad may come earlier because of unbalanced distributions of reclaimable pages among the zones.
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
OK. Anyway a preallocate based shrinking policy could be far from optimal. I'd suggest to switch to user space directed shrinking via fadvise(DONTNEED), and leave the kernel one a fail safe path. The user space tool could gather page information from the filecache interface which I've been maintaining out of tree, and to drop inactive/active pages from large files first. That should be a better policy at least for rotational disks.
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
Yes there are some strange behaviors. I tried to populate the page cache with 1/30 mapped file pages and others normal file pages, all referenced once. I get this on "echo disk > /sys/power/state":
[ 462.820098] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 462.827161] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 462.834249] PM: Basic memory bitmaps created [ 462.838631] PM: Syncing filesystems ... done. [ 463.167805] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 463.175738] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 463.183834] PM: Preallocating image memory ... done (allocated 383898 pages, 128000 image pages kept) [ 469.605741] PM: Allocated 1535592 kbytes in 6.41 seconds (239.56 MB/s) [ 469.612325] [ 469.768796] Restarting tasks ... done. [ 469.775044] PM: Basic memory bitmaps freed
Immediately after that, I copied a big sparse file into memory, and get this:
[ 508.097913] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 508.104799] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 508.111702] PM: Basic memory bitmaps created [ 508.116073] PM: Syncing filesystems ... done. [ 509.208608] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 509.216692] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 509.224708] PM: Preallocating image memory ... done (allocated 383872 pages, 128000 image pages kept) [ 520.951882] PM: Allocated 1535488 kbytes in 11.71 seconds (131.12 MB/s)
It's much worse.
Your patches are really interesting exercises for the vmscan code ;-)
Quoted 8 lines
Quoted 8 lines
kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 5 lines
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?Possibly, but not right now if you please? This is just moving code BTW.
OK.
Quoted 5 lines
Quoted 3 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
OK. Just was a wild thought.
Quoted 8 lines
Quoted 8 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }
Quoted 5 lines
Quoted 2 lines
Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
totalreserve_pages could be better. When free memory drops below that threshold(it actually works per zone), kswapd will wake up trying to reclaim pages. If the total reclaimable+free pages are as low as totalreserve_pages, that would drive kswapd mad - scanning the whole zones, trying to squeeze the last pages out of them. Sure kswapd will stop somewhere, but the resulting scan:reclaim ratio would be pretty high and therefore hurt performance.
So we shall stop preallocation when reclaimable pages go down to something like (5*totalreserve_pages). The vmscan mad may come earlier because of unbalanced distributions of reclaimable pages among the zones.
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
OK. Anyway a preallocate based shrinking policy could be far from optimal. I'd suggest to switch to user space directed shrinking via fadvise(DONTNEED), and leave the kernel one a fail safe path. The user space tool could gather page information from the filecache interface which I've been maintaining out of tree, and to drop inactive/active pages from large files first. That should be a better policy at least for rotational disks.
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
Yes there are some strange behaviors. I tried to populate the page cache with 1/30 mapped file pages and others normal file pages, all referenced once. I get this on "echo disk > /sys/power/state":
[ 462.820098] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 462.827161] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 462.834249] PM: Basic memory bitmaps created [ 462.838631] PM: Syncing filesystems ... done. [ 463.167805] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 463.175738] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 463.183834] PM: Preallocating image memory ... done (allocated 383898 pages, 128000 image pages kept) [ 469.605741] PM: Allocated 1535592 kbytes in 6.41 seconds (239.56 MB/s) [ 469.612325] [ 469.768796] Restarting tasks ... done. [ 469.775044] PM: Basic memory bitmaps freed
Immediately after that, I copied a big sparse file into memory, and get this:
[ 508.097913] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 508.104799] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 508.111702] PM: Basic memory bitmaps created [ 508.116073] PM: Syncing filesystems ... done. [ 509.208608] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 509.216692] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 509.224708] PM: Preallocating image memory ... done (allocated 383872 pages, 128000 image pages kept) [ 520.951882] PM: Allocated 1535488 kbytes in 11.71 seconds (131.12 MB/s)
It's much worse.
Your patches are really interesting exercises for the vmscan code ;-)
Quoted 8 lines
Quoted 8 lines
kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 5 lines
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?Possibly, but not right now if you please? This is just moving code BTW.
OK.
Quoted 5 lines
Quoted 3 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
OK. Just was a wild thought.
Quoted 8 lines
Quoted 8 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }
Quoted 5 lines
Quoted 2 lines
Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
totalreserve_pages could be better. When free memory drops below that threshold(it actually works per zone), kswapd will wake up trying to reclaim pages. If the total reclaimable+free pages are as low as totalreserve_pages, that would drive kswapd mad - scanning the whole zones, trying to squeeze the last pages out of them. Sure kswapd will stop somewhere, but the resulting scan:reclaim ratio would be pretty high and therefore hurt performance.
So we shall stop preallocation when reclaimable pages go down to something like (5*totalreserve_pages). The vmscan mad may come earlier because of unbalanced distributions of reclaimable pages among the zones.
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
OK. Anyway a preallocate based shrinking policy could be far from optimal. I'd suggest to switch to user space directed shrinking via fadvise(DONTNEED), and leave the kernel one a fail safe path. The user space tool could gather page information from the filecache interface which I've been maintaining out of tree, and to drop inactive/active pages from large files first. That should be a better policy at least for rotational disks.
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled? hibernate_preallocate_memory() will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages. That means *all* swappable pages will be swapped out in the process - that's a major performance regression! And the zones are likely to be *over scanned* and go to *all unreclaimable* state! (Hopefully they may be already small at the time.)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 33 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 3 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Quoted 6 lines
Quoted 2 lines
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.
No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
If we consider maximum image sizes, that means allocating slightly more than 50% of RAM, so it really shouldn't regress that much IMO.
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 37 lines · Rafael J. Wysocki
Quoted 36 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Quoted 6 lines
Quoted 3 lines
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
Quoted 2 lines
If we consider maximum image sizes, that means allocating slightly more than 50% of RAM, so it really shouldn't regress that much IMO.
Right, that would be a less problem.
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 42 lines · Wu Fengguang
Quoted 41 lines · Rafael J. Wysocki
Quoted 39 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.
Quoted 8 lines
Quoted 2 lines
No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
That should be clear in the new patches:
http://patchwork.kernel.org/patch/22193/
http://patchwork.kernel.org/patch/22191/
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 48 lines · Rafael J. Wysocki
Quoted 47 lines · Wu Fengguang
Quoted 37 lines · Rafael J. Wysocki
Quoted 36 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Quoted 6 lines
Quoted 3 lines
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
Quoted 7 lines
Quoted 3 lines
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
That should be clear in the new patches:
http://patchwork.kernel.org/patch/22193/
http://patchwork.kernel.org/patch/22191/
Yes, thanks! That's much better :)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 48 lines · Rafael J. Wysocki
Quoted 47 lines · Wu Fengguang
Quoted 37 lines · Rafael J. Wysocki
Quoted 36 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Quoted 6 lines
Quoted 3 lines
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
Quoted 7 lines
Quoted 3 lines
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
That should be clear in the new patches:
http://patchwork.kernel.org/patch/22193/
http://patchwork.kernel.org/patch/22191/
Yes, thanks! That's much better :)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 42 lines · Wu Fengguang
Quoted 41 lines · Rafael J. Wysocki
Quoted 39 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.
Quoted 8 lines
Quoted 2 lines
No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
That should be clear in the new patches:
http://patchwork.kernel.org/patch/22193/
http://patchwork.kernel.org/patch/22191/
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 37 lines · Rafael J. Wysocki
Quoted 36 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Quoted 6 lines
Quoted 3 lines
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
Ah yes - I didn't notice that count was subtracted here:
for (count -= size; count > 0; count--) {Make "count -= size" a standalone line to make that more obvious?
Quoted 2 lines
If we consider maximum image sizes, that means allocating slightly more than 50% of RAM, so it really shouldn't regress that much IMO.
Right, that would be a less problem.
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 33 lines · Wu Fengguang
Quoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.[snip]
Quoted 3 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Quoted 6 lines
Quoted 2 lines
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled?
hibernate_preallocate_memory()will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages.
No. It's going to allocate (total RAM - anticipated image size) and then free up (allocated-image_size) pages.
If we consider maximum image sizes, that means allocating slightly more than 50% of RAM, so it really shouldn't regress that much IMO.
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 28 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
[snip]
Quoted 5 lines
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
So you do have swap file enabled? hibernate_preallocate_memory() will firstly try to allocate as much pages as possible(savable+free), and then to free up (allocated-image_size) pages. That means *all* swappable pages will be swapped out in the process - that's a major performance regression! And the zones are likely to be *over scanned* and go to *all unreclaimable* state! (Hopefully they may be already small at the time.)
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
The 10 fold slowdown may be related to swapping IO:shrink_all_memory() tends to be reclaiming less anon pages.
Is this box running on SSD? (Which can be slow on random writes.)
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
Quoted 23 lines · Wu Fengguang
Quoted 22 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
Quoted 8 lines
Quoted 6 lines
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.The 10 fold slowdown may be related to swapping IO:
I guess it is.
Quoted 3 lines
shrink_all_memory()tends to be reclaiming less anon pages.Is this box running on SSD? (Which can be slow on random writes.)
No, on a normal spinning-plate HDD (2.5'').
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 23 lines · Wu Fengguang
Quoted 22 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)Unfortunately, I'm observing a regression and a huge one.
Quoted 8 lines
Quoted 6 lines
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.The 10 fold slowdown may be related to swapping IO:
I guess it is.
Quoted 3 lines
shrink_all_memory()tends to be reclaiming less anon pages.Is this box running on SSD? (Which can be slow on random writes.)
No, on a normal spinning-plate HDD (2.5'').
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 20 lines · Rafael J. Wysocki
Quoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Quoted 8 lines
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call
shrink_all_memory()once with a sufficiently large argument before the preallocation.
The 10 fold slowdown may be related to swapping IO:shrink_all_memory() tends to be reclaiming less anon pages.
Is this box running on SSD? (Which can be slow on random writes.)
Thanks,
Fengguang
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Wu FengguangQuoted 10 lines · Wu Fengguang
Quoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 8 lines
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
Unfortunately, I'm observing a regression and a huge one.
On my Atom-based test box with 1 GB of RAM after a fresh boot and starting X with KDE 4 there are ~256 MB free. To create an image we need to free ~300 MB and that takes ~2 s with the old code and ~15 s with the new one.
It helps to call shrink_all_memory() once with a sufficiently large argument before the preallocation.
Quoted 25 lines
For you reference, here is the free memory before/after
hibernate_preallocate_memory():# free total used free shared buffers cached Mem: 1933 1917 15 0 0 1845 -/+ buffers/cache: 72 1861 Swap: 0 0 0# free total used free shared buffers cached Mem: 1933 920 1012 0 0 356 -/+ buffers/cache: 563 1369 Swap: 0 0 0It seems that the preallocated memory is not freed on
-ENOMEM.kernel/power/snapshot.c +7
-0+ error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out;
Quoted 3 lines
memory_bm_create()is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?
Possibly, but not right now if you please? This is just moving code BTW.
Quoted 2 lines
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
I think we can do it, but it really is low priority to me at the moment.
Quoted 9 lines
(quoted diff) +6
-0+ for_each_populated_zone(zone) { + size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone)) + count -= zone->lowmem_reserve[ZONE_NORMAL]; + }Why [
ZONE_NORMAL] instead of [zone]?ZONE_NORMALmay not always be the largest zone, for example, My 4GB laptop has a tinyZONE_NORMALand a largeZONE_DMA32.
Ah, this is a leftover and it should be changed or even dropped. Can you please remind me how exactly lowmem_reserve[] is supposed to work?
Quoted 7 lines
(quoted diff) +5
-0+ /* If size < max_size, preallocating enough memory may be impossible. */ + if (count > 0 && size == max_size) + error = -ENOMEM; + if (error) + goto err_out;The two if()s can be merged.
Unfortunately, the first one is actually wrong. :-)
It's not present in the updated patchset I'm going to send tomorrow.
Quoted 2 lines
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Hmm. I don't see immediately why would it. Maybe the regression I'm seeing is related to that ...
Thanks,
Rafael
Re: [PATCH 5/5] PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiQuoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
Quoted 3 lines
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]
Rafael, I tried out your patches and found doubled memory shrink speed!
[ 579.641781] PM: Preallocating image memory ... done (allocated 383900 pages, 128000 image pages kept) [ 583.087875] PM: Allocated 1535600 kbytes in 3.43 seconds (447.69 MB/s)
For you reference, here is the free memory before/after hibernate_preallocate_memory():
# free
total used free shared buffers cached
Mem: 1933 1917 15 0 0 1845
-/+ buffers/cache: 72 1861
Swap: 0 0 0 # free
total used free shared buffers cached
Mem: 1933 920 1012 0 0 356
-/+ buffers/cache: 563 1369
Swap: 0 0 0It seems that the preallocated memory is not freed on -ENOMEM.
+ error = memory_bm_create(&orig_bm, GFP_IMAGE, PG_ANY);
+ if (error)
+ goto err_out;
+
+ error = memory_bm_create(©_bm, GFP_IMAGE, PG_ANY);
+ if (error)
+ goto err_out;
memory_bm_create() is called a number of times, each time it will call create_mem_extents()/memory_bm_free(). Can they be optimized to be called only once?
A side note: there are somehow duplicated *_extent_*() logics in the filesystems, is it possible that we abstract out some of the common code?
+ for_each_populated_zone(zone) {
+ size += snapshot_additional_pages(zone); + count += zone_page_state(zone, NR_FREE_PAGES); + if (!is_highmem(zone))
+ count -= zone->lowmem_reserve[ZONE_NORMAL];
+ }
Why [ZONE_NORMAL] instead of [zone]? ZONE_NORMAL may not always be the largest zone, for example, My 4GB laptop has a tiny ZONE_NORMAL and a large ZONE_DMA32.
+ /* If size < max_size, preallocating enough memory may be impossible. */
+ if (count > 0 && size == max_size)
+ error = -ENOMEM;
+ if (error)
+ goto err_out;
The two if()s can be merged.
At last, I'd express my major concern about the transition to preallocate based memory shrinking: will it lead to more random swapping IOs?
Thanks,
Fengguang
PATCH 5/5 PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Since the hibernation code is now going to use allocations of memory to create enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing.
[rev. 2: Change the strategy of preallocating memory to allocate as
many pages as needed to get the right image size in one shot (the excessive allocated pages are released afterwards).]
--- kernel/power/disk.c | 15 +++- kernel/power/power.h | 2 kernel/power/snapshot.c | 157 ++++++++++++++++++++++++++++++------------------ 3 files changed, 112 insertions(+), 62 deletions(-)
kernel/power/snapshot.c +100 -57
@@ -1033,6 +1033,25 @@ copy_data_pages(struct memory_bitmap *costatic unsigned int nr_copy_pages;/* Number of pages needed for saving the original pfns of the image pages */ static unsigned int nr_meta_pages; +/* +* Numbers of normal and highmem page frames allocated for hibernation image +* before suspending devices. +*/ +unsigned int alloc_normal, alloc_highmem; +/* +* Memory bitmap used for marking saveable pages (during hibernation) or +* hibernation image pages (during restore) +*/ +static struct memory_bitmap orig_bm; +/* +* Memory bitmap used during hibernation for marking allocated page frames that +* will contain copies of saveable pages. During restore it is initially used +* for marking hibernation image pages, but then the set bits from it are +* duplicated in @orig_bm and it is released. On highmem systems it is next +* used for marking "safe" highmem pages, but it has to be reinitialized for +* this purpose. +*/ +static struct memory_bitmap copy_bm;/** * swsusp_free - free pages allocated for the suspend.
@@ -1064,12 +1083,16 @@ void swsusp_free(void) nr_meta_pages =0 ; restore_pblist =NULL ; buffer =NULL ; + alloc_normal =0 ; + alloc_highmem =0 ; }/* Helper function used for the shrinking of memory. */ +#define GFP_IMAGE (GFP_KERNEL | __GFP_NO_OOM_KILL) +/** -* swsusp_shrink_memory - Make the kernel release as much memory as needed +* hibernate_preallocate_memory - Preallocate memory for hibernation image * * To create a hibernation image it is necessary to make a copy of every page * frame in use. We also need a number of page frames to be free during
@@ -1088,16 +1111,27 @@ void swsusp_free(void)* frames in use is below the requested image size or it is impossible to * allocate more memory, whichever happens first. */ -int swsusp_shrink_memory (void ) +int hibernate_preallocate_memory (void ) {struct zone *zone;unsigned long saveable, size, max_size, count, pages =0 ;struct timeval start, stop; -int error =0 ; +int error; -printk (KERN_INFO "PM: Shrinking memory ... " ); +printk (KERN_INFO "PM: Preallocating image memory ... " );do_gettimeofday (&start); + error =memory_bm_create (&orig_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + error =memory_bm_create (©_bm,GFP_IMAGE ,PG_ANY ); +if (error) + goto err_out; + + alloc_normal =0 ; + alloc_highmem =0 ; +/* Count the number of saveable data pages. */ saveable =count_data_pages () +count_highmem_pages ();
@@ -1130,29 +1164,55 @@ int swsusp_shrink_memory(void)for (count -= size; count >0 ; count--) {struct page *page; - page =alloc_image_page (GFP_KERNEL | __GFP_NO_OOM_KILL); + page =alloc_image_page (GFP_IMAGE );if (!page)break ; - pages++; +memory_bm_set_bit (©_bm,page_to_pfn (page)); +if (PageHighMem (page)) + alloc_highmem++; +else + alloc_normal++; }/* If size < max_size, preallocating enough memory may be impossible. */ if (count >0 && size == max_size) error = -ENOMEM ; +if (error) + goto err_out; -/* Release all of the preallocated page frames. */ -swsusp_free (); +/* Save the number of allocated pages for the statistics below. */ + pages = alloc_normal + alloc_highmem; -if (error) { -printk (KERN_CONT "\n" ); -return error; +/* +* We only need 'size' page frames for the image but we have allocated +* more. Release the excessive ones now. +*/ +memory_bm_position_reset (©_bm); +while (alloc_normal + alloc_highmem > size) { +unsigned long pfn =memory_bm_next_pfn (©_bm); +struct page *page =pfn_to_page (pfn); + +memory_bm_clear_bit (©_bm, pfn); +if (PageHighMem (page)) + alloc_highmem--; +else + alloc_normal--; +swsusp_unset_page_forbidden (page); +swsusp_unset_page_free (page); +__free_page (page); } out:do_gettimeofday (&stop); -printk (KERN_CONT "done (preallocated %lu free pages)\n" , pages); -swsusp_show_speed (&start, &stop, pages,"Freed" ); +printk (KERN_CONT "done (allocated %lu pages, %lu image pages kept)\n" , + pages, size); +swsusp_show_speed (&start, &stop, pages,"Allocated" );return 0 ; + + err_out: +printk (KERN_CONT "\n" ); +swsusp_free (); +return error; }#ifdef CONFIG_HIGHMEM
@@ -1163,7 +1223,7 @@ int swsusp_shrink_memory(void)static unsigned int count_pages_for_highmem (unsigned int nr_highmem) { -unsigned int free_highmem =count_free_highmem_pages (); +unsigned int free_highmem =count_free_highmem_pages () + alloc_highmem;if (free_highmem >= nr_highmem) nr_highmem =0 ;
@@ -1185,19 +1245,17 @@ count_pages_for_highmem(unsigned int nr_static int enough_free_mem (unsigned int nr_pages,unsigned int nr_highmem) {struct zone *zone; -unsigned int free =0 , meta =0 ; +unsigned int free = alloc_normal; -for_each_zone (zone) { - meta +=snapshot_additional_pages (zone); +for_each_zone (zone)if (!is_highmem (zone)) free +=zone_page_state (zone,NR_FREE_PAGES ); - } nr_pages +=count_pages_for_highmem (nr_highmem); -pr_debug ("PM: Normal pages needed: %u + %u + %u, available pages: %u\n" , - nr_pages,PAGES_FOR_IO , meta, free); +pr_debug ("PM: Normal pages needed: %u + %u, available pages: %u\n" , + nr_pages,PAGES_FOR_IO , free); -return free > nr_pages +PAGES_FOR_IO + meta; +return free > nr_pages +PAGES_FOR_IO ; }#ifdef CONFIG_HIGHMEM
@@ -1219,7 +1277,7 @@ static inline int get_highmem_buffer(int*/ static inline unsigned int -alloc_highmem_image_pages (struct memory_bitmap *bm,unsigned int nr_highmem) +alloc_highmem_pages (struct memory_bitmap *bm,unsigned int nr_highmem) {unsigned int to_alloc =count_free_highmem_pages ();
@@ -1230,7 +1288,7 @@ alloc_highmem_image_pages(struct memory_while (to_alloc-- >0 ) {struct page *page; - page =alloc_image_page (__GFP_HIGHMEM); + page =alloc_image_page (__GFP_HIGHMEM | __GFP_NO_OOM_KILL);memory_bm_set_bit (bm,page_to_pfn (page)); }return nr_highmem;
@@ -1239,7 +1297,7 @@ alloc_highmem_image_pages(struct memory_static inline int get_highmem_buffer (int safe_needed) {return 0 ; }static inline unsigned int -alloc_highmem_image_pages (struct memory_bitmap *bm,unsigned int n) {return 0 ; } +alloc_highmem_pages (struct memory_bitmap *bm,unsigned int n) {return 0 ; }#endif /* CONFIG_HIGHMEM */ /**
@@ -1258,51 +1316,36 @@ static int swsusp_alloc(struct memory_bitmap *orig_bm, struct memory_bitmap *copy_bm, unsigned int nr_pages, unsigned int nr_highmem) { - int error; - - error =memory_bm_create (orig_bm,GFP_ATOMIC | __GFP_COLD,PG_ANY ); -if (error) - goto Free; - - error =memory_bm_create (copy_bm,GFP_ATOMIC | __GFP_COLD,PG_ANY ); -if (error) - goto Free; + int error = 0;if (nr_highmem >0 ) { error =get_highmem_buffer (PG_ANY );if (error) - goto Free; - - nr_pages +=alloc_highmem_image_pages (copy_bm, nr_highmem); + goto err_out; +if (nr_highmem > alloc_highmem) { + nr_highmem -= alloc_highmem; + nr_pages +=alloc_highmem_pages (copy_bm, nr_highmem); + } } -while (nr_pages-- >0 ) { -struct page *page =alloc_image_page (GFP_ATOMIC | __GFP_COLD); - -if (!page) - goto Free; +if (nr_pages > alloc_normal) { + nr_pages -= alloc_normal; +while (nr_pages-- >0 ) { +struct page *page; -memory_bm_set_bit (copy_bm,page_to_pfn (page)); + page =alloc_image_page (GFP_ATOMIC | __GFP_COLD); +if (!page) + goto err_out; +memory_bm_set_bit (copy_bm,page_to_pfn (page)); + } } +return 0 ; - Free: + err_out:swsusp_free (); -return -ENOMEM ; +return error; } -/* Memory bitmap used for marking saveable pages (during suspend) or the -* suspend image pages (during resume) -*/ -static struct memory_bitmap orig_bm; -/* Memory bitmap used on suspend for marking allocated pages that will contain -* the copies of saveable pages. During resume it is initially used for -* marking the suspend image pages, but then its set bits are duplicated in -* @orig_bm and it is released. Next, on systems with high memory, it may be -* used for marking "safe" highmem pages, but it has to be reinitialized for -* this purpose. -*/ -static struct memory_bitmap copy_bm; - asmlinkage int swsusp_save(void) {unsigned int nr_pages, nr_highmem;
kernel/power/power.h +1 -1
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resumeextern int create_basic_memory_bitmaps (void );extern void free_basic_memory_bitmaps (void ); -extern int swsusp_shrink_memory (void ); +extern int hibernate_preallocate_memory (void );/** * Auxiliary structure used for reading the snapshot image data and
kernel/power/disk.c +11 -4
@@ -303,8 +303,8 @@ int hibernation_snapshot(int platform_moif (error)return error; -/* Free memory before shutting down devices. */ - error =swsusp_shrink_memory (); +/* Preallocate image memory before shutting down devices. */ + error =hibernate_preallocate_memory ();if (error) goto Close;
@@ -320,6 +320,10 @@ int hibernation_snapshot(int platform_mo/* Control returns here after successful restore */ Resume_devices: +/* We may need to release the preallocated image pages here. */ +if (error || !in_suspend) +swsusp_free (); +device_resume (in_suspend ? (error ?PMSG_RECOVER :PMSG_THAW ) :PMSG_RESTORE );resume_console ();
@@ -593,7 +597,10 @@ int hibernate(void) goto Thaw; error =hibernation_snapshot (hibernation_mode ==HIBERNATION_PLATFORM ); -if (in_suspend && !error) { +if (error) + goto Thaw; + +if (in_suspend) {unsigned int flags =0 ;if (hibernation_mode ==HIBERNATION_PLATFORM )
@@ -605,8 +612,8 @@ int hibernate(void)power_down (); }else {pr_debug ("PM: Image restored successfully.\n" ); -swsusp_free (); } + Thaw:thaw_processes (); Finish:
cover PM: Drop shrink_all_memory (rev. 3)
In reply to Rafael J. WysockiQuoted 30 lines · Rafael J. Wysocki
Quoted 2 lines · Wu Fengguang
Hi Rafael,
Hi,
Quoted 5 lines
I happened to be doing some benchmarks on the older
shrink_all_memory(), Hopefully it can be a useful reference point for the new design.The current swsusp_shrink_memory()/shrink_all_memory() are terribly
inefficient: it takes 7-9s to free up 1.4G memory:One reason may be that it takes too many steps to do it,
Quoted 2 lines
[ 131.899389] PM: Freed 1413380 kbytes in 7.03 seconds (201.04 MB/s) [ 732.757916] PM: Freed 1490116 kbytes in 9.37 seconds (159.03 MB/s)because the new way doesn't seem to do any better.
Quoted 5 lines
Below are the logs I collected by injecting printks. There are basically two major problems:
-swsusp_shrink_memory()scans the whole 2G memory again and again;
-shrink_all_memory()is slow. It won't reclaim pages at all with small priority values, because it's batching size is 10000 pages.I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
Quoted 7 lines
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
Well, perhaps we can do it all in one shot after all, I'll think how to do that.
I've changed swsusp_shrink_memory() to preallocate all of the pages in one iteration. Although it doesn't seem to improve the speed of memory shrinking, the function is simpler in this form.
Anyway, updated patch series follows:
[1/5] - the Andrew's patch introducing __GFP_NO_OOM_KILL (I decided it would be
better do it this way in this particular case. The fact that the OOM killer is not going to work after tasks have been frozen is a different issue.)
[2/5] - move swsusp_shrink_memory to snapshot.c, no major changes
[3/5] - remove the shrinking of memory from suspend code (in a separate patch
as requested by Linus)
[4/5] - use memory allocations to for making the room for the image
[5/5] - do not release all memory allocated by [4/5] and use it for
creating the image directly (some allocated memory is released).
Thanks,
Rafael
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Rafael J. WysockiHi!
Quoted 10 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
Quoted 7 lines · Pavel Machek
Hi!
Quoted 5 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
Quoted 8 lines
Quoted 5 lines
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Why not just one step? It doesn't seem to hurt performance AFAICS.
Thanks,
Rafael
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
Quoted 10 lines · Rafael J. Wysocki
Quoted 9 lines · Pavel Machek
Hi!
Quoted 7 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
I'm not sure.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Why not just one step? It doesn't seem to hurt performance AFAICS.
One step is obviously fine, too.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Rafael J. WysockiQuoted 10 lines · Rafael J. Wysocki
Quoted 9 lines · Pavel Machek
Hi!
Quoted 7 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
I'm not sure.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Why not just one step? It doesn't seem to hurt performance AFAICS.
One step is obviously fine, too.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Pavel MachekQuoted 7 lines · Pavel Machek
Hi!
Quoted 5 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
Quoted 8 lines
Quoted 5 lines
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Why not just one step? It doesn't seem to hurt performance AFAICS.
Thanks,
Rafael
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Rafael J. WysockiHi!
Quoted 10 lines
I know that
swsusp_shrink_memory()has problems, that's why I'd like to get rid of it.Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
We could increase step size after each step. Free in 40MB step, then 80MB step, then 160MB step, ...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Wu FengguangQuoted 2 lines · Wu Fengguang
Hi Rafael,
Hi,
Quoted 5 lines
I happened to be doing some benchmarks on the older
shrink_all_memory(), Hopefully it can be a useful reference point for the new design.The current swsusp_shrink_memory()/shrink_all_memory() are terribly
inefficient: it takes 7-9s to free up 1.4G memory:
One reason may be that it takes too many steps to do it,
Quoted 2 lines
[ 131.899389] PM: Freed 1413380 kbytes in 7.03 seconds (201.04 MB/s) [ 732.757916] PM: Freed 1490116 kbytes in 9.37 seconds (159.03 MB/s)
because the new way doesn't seem to do any better.
Quoted 5 lines
Below are the logs I collected by injecting printks. There are basically two major problems:
-swsusp_shrink_memory()scans the whole 2G memory again and again;
-shrink_all_memory()is slow. It won't reclaim pages at all with small priority values, because it's batching size is 10000 pages.
I know that swsusp_shrink_memory() has problems, that's why I'd like to get rid of it.
Quoted 1 line
I wonder if it's possible to free up the memory within 1s at all.
I'm not sure.
Apparently, the counting of saveable pages takes substantial time (0.5 s each iteration on my 64-bit test box), so we can improve that by limiting the number of iterations.
Well, perhaps we can do it all in one shot after all, I'll think how to do that.
Thanks,
Rafael
Re: [PATCH 0/4] PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Rafael J. WysockiHi Rafael,
I happened to be doing some benchmarks on the older shrink_all_memory(), Hopefully it can be a useful reference point for the new design.
The current swsusp_shrink_memory()/shrink_all_memory() are terribly
inefficient: it takes 7-9s to free up 1.4G memory:
[ 131.899389] PM: Freed 1413380 kbytes in 7.03 seconds (201.04 MB/s) [ 732.757916] PM: Freed 1490116 kbytes in 9.37 seconds (159.03 MB/s)
Below are the logs I collected by injecting printks. There are basically two major problems:
- swsusp_shrink_memory() scans the whole 2G memory again and again;
- shrink_all_memory() is slow. It won't reclaim pages at all with small priority values, because it's batching size is 10000 pages.
I wonder if it's possible to free up the memory within 1s at all. (Maybe the slowness is due to too much enabled debugging options...)
Thanks,
Fengguang
---
vanilla 2.6.30-rc2-next-20090417:
[ 124.516187] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 124.523087] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 124.530060] PM: Basic memory bitmaps created [ 124.534421] PM: Syncing filesystems ... done. [ 124.842282] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 124.849800] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 124.857571] PM: Shrinking memory... tmp=471584, size=491906, highmem_size=0 [ 124.939103] shrink_all_memory: pages=10000 [ 125.019543] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 125.027636]-tmp=451770, size=481986, highmem_size=0 [ 125.107571] shrink_all_memory: pages=10000 [ 125.139928] shrink_all_zones: pass=0, prio=7, lru=Normal.2, pages=10000, reclaimed=8500 [ 125.280940] shrink_all_zones: pass=0, prio=6, lru=DMA32.2, pages=1500, reclaimed=1500 [ 125.547990] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=10000 [ 125.556135]\tmp=411598, size=461898, highmem_size=0 [ 125.637414] shrink_all_memory: pages=10000 [ 125.716890] shrink_all_zones: pass=0, prio=7, lru=Normal.2, pages=10000, reclaimed=10000 [ 125.725092]|tmp=391507, size=451854, highmem_size=0 [ 125.806935] shrink_all_memory: pages=10000 [ 125.886317] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 125.894531]/tmp=371481, size=441841, highmem_size=0 [ 125.976823] shrink_all_memory: pages=10000 [ 126.104367] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 126.112572]-tmp=351715, size=431952, highmem_size=0 [ 126.195178] shrink_all_memory: pages=10000 [ 126.274586] shrink_all_zones: pass=0, prio=6, lru=DMA32.2, pages=10000, reclaimed=10000 [ 126.282698]\tmp=331949, size=422063, highmem_size=0 [ 126.365743] shrink_all_memory: pages=10000 [ 126.445851] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 126.453968]|tmp=311858, size=412019, highmem_size=0 [ 126.537417] shrink_all_memory: pages=10000 [ 126.616980] shrink_all_zones: pass=0, prio=9, lru=Normal.2, pages=10000, reclaimed=10000 [ 126.625180]/tmp=291751, size=401975, highmem_size=0 [ 126.709066] shrink_all_memory: pages=10000 [ 126.788665] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 126.796833]-tmp=271725, size=391962, highmem_size=0 [ 126.880997] shrink_all_memory: pages=10000 [ 127.008443] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 127.016667]\tmp=251716, size=381949, highmem_size=0 [ 127.101581] shrink_all_memory: pages=10000 [ 127.181588] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 127.189728]|tmp=231673, size=371936, highmem_size=0 [ 127.275105] shrink_all_memory: pages=10000 [ 127.354799] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 127.363003]/tmp=211599, size=361892, highmem_size=0 [ 127.448750] shrink_all_memory: pages=10000 [ 127.528252] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 127.536385]-tmp=191621, size=351910, highmem_size=0 [ 127.622369] shrink_all_memory: pages=10000 [ 127.750093] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 127.758295]\tmp=171539, size=341866, highmem_size=0 [ 127.844867] shrink_all_memory: pages=10000 [ 127.925614] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 127.933758]|tmp=151465, size=331822, highmem_size=0 [ 128.020878] shrink_all_memory: pages=10000 [ 128.100580] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 128.108803]/tmp=131391, size=321778, highmem_size=0 [ 128.196312] shrink_all_memory: pages=10000 [ 128.275643] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 128.283769]-tmp=111413, size=311796, highmem_size=0 [ 128.371814] shrink_all_memory: pages=10000 [ 128.501803] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=10000 [ 128.510007]\tmp=91339, size=301752, highmem_size=0 [ 128.597726] shrink_all_memory: pages=10000 [ 128.677138] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 128.685277]|tmp=71296, size=291739, highmem_size=0 [ 128.774061] shrink_all_memory: pages=10000 [ 128.855940] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=10000 [ 128.864145]/tmp=51259, size=281726, highmem_size=0 [ 128.953486] shrink_all_memory: pages=10000 [ 129.033417] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 129.041553]-tmp=31172, size=271682, highmem_size=0 [ 129.131233] shrink_all_memory: pages=10000 [ 129.210693] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=10000 [ 129.218994]\tmp=11146, size=261669, highmem_size=0 [ 129.309142] shrink_all_memory: pages=10000 [ 129.388523] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 129.396648]|tmp=-8880, size=251656, highmem_size=0 [ 129.487193] shrink_all_memory: pages=10000 [ 129.614831] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=10000 [ 129.623059]/tmp=-28954, size=241612, highmem_size=0 [ 129.714055] shrink_all_memory: pages=10000 [ 129.794104] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=10000 [ 129.802246]-tmp=-48932, size=231630, highmem_size=0 [ 129.893893] shrink_all_memory: pages=10000 [ 129.973667] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=10000, reclaimed=10000 [ 129.981892]\tmp=-69020, size=221586, highmem_size=0 [ 130.073916] shrink_all_memory: pages=10000 [ 130.154620] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=10000 [ 130.162853]|tmp=-89156, size=211511, highmem_size=0 [ 130.255274] shrink_all_memory: pages=10000 [ 130.334612] shrink_all_zones: pass=0, prio=8, lru=DMA32.2, pages=10000, reclaimed=10000 [ 130.342750]/tmp=-109182, size=201498, highmem_size=0 [ 130.435551] shrink_all_memory: pages=10000 [ 130.515074] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=10000 [ 130.523305]-tmp=-129273, size=191454, highmem_size=0 [ 130.616714] shrink_all_memory: pages=10000 [ 130.696350] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=10000 [ 130.704490]\tmp=-149299, size=181441, highmem_size=0 [ 130.798322] shrink_all_memory: pages=10000 [ 130.877834] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=10000 [ 130.886038]|tmp=-169325, size=171428, highmem_size=0 [ 130.980312] shrink_all_memory: pages=10000 [ 131.107844] shrink_all_zones: pass=0, prio=3, lru=DMA32.2, pages=10000, reclaimed=10000 [ 131.115982]/tmp=-189351, size=161415, highmem_size=0 [ 131.210530] shrink_all_memory: pages=10000 [ 131.291223] shrink_all_zones: pass=0, prio=7, lru=Normal.2, pages=10000, reclaimed=10000 [ 131.299433]-tmp=-209459, size=151371, highmem_size=0 [ 131.394488] shrink_all_memory: pages=10000 [ 131.474123] shrink_all_zones: pass=0, prio=3, lru=Normal.2, pages=10000, reclaimed=10000 [ 131.482344]\tmp=-229420, size=141389, highmem_size=0 [ 131.577910] shrink_all_memory: pages=10000 [ 131.657376] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=10000 [ 131.665498]|tmp=-249511, size=131345, highmem_size=0 [ 131.761676] shrink_all_memory: pages=3345 [ 131.791048] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=3345, reclaimed=3345 [ 131.799085]/tmp=-256256, size=127966, highmem_size=0 [ 131.895290]done (353345 pages freed) [ 131.899389] PM: Freed 1413380 kbytes in 7.03 seconds (201.04 MB/s)
1/30 memory being mapped, vanilla 2.6.30-rc2-next-20090417:
AnonPages: 38684 kB Mapped: 66940 kB
[ 722.944082] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 722.956215] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 722.963053] PM: Basic memory bitmaps created [ 722.967365] PM: Syncing filesystems ... done. [ 723.361274] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 723.369310] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 723.377342] PM: Shrinking memory... tmp=508165, size=510179, highmem_size=0 [ 723.563602] shrink_all_memory: pages=10000 [ 723.648921] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9766 [ 723.733064] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19581 [ 723.741225]-tmp=468972, size=490587, highmem_size=0 [ 723.821406] shrink_all_memory: pages=10000 [ 723.902912] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9804 [ 723.987433] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19617 [ 723.995565]\tmp=429714, size=470964, highmem_size=0 [ 724.077458] shrink_all_memory: pages=10000 [ 724.160394] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9808 [ 724.261056] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19610 [ 724.269482]|tmp=390489, size=451341, highmem_size=0 [ 724.353672] shrink_all_memory: pages=10000 [ 724.556153] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9806 [ 724.669591] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19636 [ 724.677770]/tmp=351365, size=431780, highmem_size=0 [ 724.762188] shrink_all_memory: pages=10000 [ 724.923372] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9805 [ 725.037897] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19620 [ 725.046501]-tmp=312189, size=412188, highmem_size=0 [ 725.133452] shrink_all_memory: pages=10000 [ 725.371199] shrink_all_zones: pass=0, prio=5, lru=DMA32.2, pages=10000, reclaimed=9781 [ 725.519983] shrink_all_zones: pass=0, prio=5, lru=Normal.2, pages=10000, reclaimed=19585 [ 725.528233]\tmp=273061, size=392627, highmem_size=0 [ 725.616020] shrink_all_memory: pages=10000 [ 725.801211] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9804 [ 725.954523] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19617 [ 725.962685]|tmp=233885, size=373035, highmem_size=0 [ 726.051775] shrink_all_memory: pages=10000 [ 726.296589] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9804 [ 726.449150] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19682 [ 726.457342]/tmp=194507, size=353350, highmem_size=0 [ 726.548053] shrink_all_memory: pages=10000 [ 726.759180] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9803 [ 726.940475] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19561 [ 726.948638]-tmp=155396, size=333789, highmem_size=0 [ 727.040362] shrink_all_memory: pages=10000 [ 727.257478] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9804 [ 727.442356] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19544 [ 727.450548]\tmp=116319, size=314259, highmem_size=0 [ 727.543609] shrink_all_memory: pages=10000 [ 727.755346] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9804 [ 727.894707] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19555 [ 727.902910]|tmp=77256, size=294729, highmem_size=0 [ 727.997018] shrink_all_memory: pages=10000 [ 728.170973] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9799 [ 728.332426] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19545 [ 728.341152]/tmp=38210, size=275199, highmem_size=0 [ 728.437625] shrink_all_memory: pages=10000 [ 728.673862] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9773 [ 728.812572] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19517 [ 728.820738]-tmp=-852, size=255669, highmem_size=0 [ 728.917360] shrink_all_memory: pages=10000 [ 729.110178] shrink_all_zones: pass=0, prio=4, lru=DMA32.2, pages=10000, reclaimed=9839 [ 729.266243] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=19610 [ 729.274407]\tmp=-40045, size=236077, highmem_size=0 [ 729.372371] shrink_all_memory: pages=10000 [ 729.553743] shrink_all_zones: pass=0, prio=4, lru=Normal.2, pages=10000, reclaimed=9741 [ 729.673174] shrink_all_zones: pass=0, prio=3, lru=DMA.2, pages=259, reclaimed=256 [ 729.681224] shrink_all_zones: pass=0, prio=3, lru=DMA32.0, pages=259, reclaimed=256 [ 729.693997] shrink_all_zones: pass=0, prio=3, lru=DMA32.2, pages=259, reclaimed=513 [ 730.006423] shrink_all_zones: pass=0, prio=2, lru=DMA32.2, pages=9487, reclaimed=9296 [ 730.177563] shrink_all_zones: pass=0, prio=2, lru=Normal.2, pages=9487, reclaimed=18626 [ 730.185640]|tmp=-98138, size=207022, highmem_size=0 [ 730.285280] shrink_all_memory: pages=10000 [ 730.484499] shrink_all_zones: pass=0, prio=3, lru=DMA32.2, pages=10000, reclaimed=9807 [ 730.637792] shrink_all_zones: pass=0, prio=3, lru=Normal.2, pages=10000, reclaimed=19613 [ 730.645975]/tmp=-137343, size=187430, highmem_size=0 [ 730.746709] shrink_all_memory: pages=10000 [ 730.754374] shrink_all_zones: pass=0, prio=5, lru=Normal.0, pages=10000, reclaimed=0 [ 731.101101] shrink_all_zones: pass=0, prio=3, lru=DMA32.2, pages=10000, reclaimed=9777 [ 731.257243] shrink_all_zones: pass=0, prio=3, lru=Normal.2, pages=10000, reclaimed=19582 [ 731.265411]-tmp=-176567, size=167807, highmem_size=0 [ 731.367111] shrink_all_memory: pages=10000 [ 731.567779] shrink_all_zones: pass=0, prio=3, lru=DMA32.2, pages=10000, reclaimed=9811 [ 731.803019] shrink_all_zones: pass=0, prio=3, lru=Normal.2, pages=10000, reclaimed=19615 [ 731.811189]\tmp=-215837, size=148184, highmem_size=0 [ 731.913738] shrink_all_memory: pages=10000 [ 732.123893] shrink_all_zones: pass=0, prio=2, lru=DMA32.2, pages=10000, reclaimed=9808 [ 732.312075] shrink_all_zones: pass=0, prio=2, lru=Normal.2, pages=10000, reclaimed=19580 [ 732.320234]|tmp=-254948, size=128623, highmem_size=0 [ 732.423776] shrink_all_memory: pages=623 [ 732.432862] shrink_all_zones: pass=0, prio=12, lru=DMA.2, pages=623, reclaimed=617 [ 732.441782] shrink_all_zones: pass=0, prio=12, lru=Normal.0, pages=623, reclaimed=617 [ 732.453341] shrink_all_zones: pass=0, prio=11, lru=DMA.0, pages=6, reclaimed=0 [ 732.460712] shrink_all_zones: pass=0, prio=11, lru=DMA32.0, pages=6, reclaimed=0 [ 732.468390] shrink_all_zones: pass=0, prio=11, lru=DMA32.2, pages=6, reclaimed=6 [ 732.488091] shrink_all_zones: pass=0, prio=6, lru=DMA32.2, pages=623, reclaimed=617 [ 732.508256] shrink_all_zones: pass=0, prio=6, lru=Normal.2, pages=623, reclaimed=1233 [ 732.516202]/tmp=-258774, size=126704, highmem_size=0 [ 732.753869]done (372529 pages freed) [ 732.757916] PM: Freed 1490116 kbytes in 9.37 seconds (159.03 MB/s)
cover PM: Drop shrink_all_memory (rev. 2) (was: Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory)
In reply to Andrew MortonQuoted 6 lines · Andrew Morton
Quoted 4 lines · On Sat, 2 May 2009 13:46:34 +0200 "Rafael J. Wysocki" <[email protected]> wrote:
Quoted 3 lines
Do we need the bitmap? I expect we can just string all these pages onto a local list via page.lru. Would need to check that - the pageframe fields are quite overloaded.
Quoted 8 lines
Quoted 1 line
This is the reason why we use the bitmaps for hibernation. :-)
grep the tree for
page->lruand you'll see that quite a few page consumers are using it. So you'd be pretty safe doing it this way.Whether it's _worth_ doing it this way is debatable, given that hibernation uses bitmaps elsewhere. But it would shrink the patch a bit I expect?
It probably would, but it turns out we need not create the new bitmap, we can use the existing ones for marking the allocated pages. That also has the benefit that we can use swsusp_free() to release them.
Modified patch series follows:
[1/4] - your patch introducing __GFP_NO_OOM_KILL (I decided it would be better
do it this way in this particular case. The fact that the OOM killer is not going to work after tasks have been frozen is a different issue.)
[2/4] - move swsusp_shrink_memory to snapshot.c, no major changes
[3/4] - use memory allocations to for making the room for the image (added
comments, used the existing bitmaps, cleaned up a bit)
[4/4] - new thing: do not release memory allocated by [3/4] and use it for
creating the image directly.
Thanks,
Rafael
Andrew Morton
maintainerRe: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory
In reply to Rafael J. WysockiQuoted 5 lines · On Sat, 2 May 2009 13:46:34 +0200 "Rafael J. Wysocki" <[email protected]> wrote:
Quoted 3 lines
Do we need the bitmap? I expect we can just string all these pages onto a local list via page.lru. Would need to check that - the pageframe fields are quite overloaded.
This is the reason why we use the bitmaps for hibernation. :-)
grep the tree for page->lru and you'll see that quite a few page consumers are using it. So you'd be pretty safe doing it this way.
Whether it's _worth_ doing it this way is debatable, given that hibernation uses bitmaps elsewhere. But it would shrink the patch a bit I expect?
Re: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory
In reply to Andrew MortonQuoted 30 lines · Andrew Morton
Quoted 27 lines · On Sat, 2 May 2009 00:29:38 +0200 "Rafael J. Wysocki" <[email protected]> wrote:
From: Rafael J. Wysocki <[email protected]>
Modify the hibernation memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary. Finally, remove the no longer used memory shrinking functions from
mm/vmscan.c....
kernel/power/snapshot.c +12
-3+static long alloc_and_mark_pages (struct memory_bitmap *bm,long nr_pages) { -if (tmp >SHRINK_BITE ) - tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); +long nr_normal =0 ; + +while (nr_pages-- >0 ) { +struct page *page; + + page =alloc_page (GFP_KERNEL | __GFP_HIGHMEM); +if (!page) +return -ENOMEM ; +memory_bm_set_bit (bm,page_to_pfn (page)); +if (!PageHighMem (page)) + nr_normal++;
Quoted 8 lines
kernel/power/snapshot.c static unsigned long memory_bm_next_pfn( · line 628
Quoted 4 lines
kernel/power/snapshot.c +3
-0+ } + +return nr_normal; }Do we need the bitmap? I expect we can just string all these pages onto a local list via page.lru. Would need to check that - the pageframe fields are quite overloaded.
This is the reason why we use the bitmaps for hibernation. :-)
Quoted 12 lines
kernel/power/snapshot.c static unsigned long memory_bm_next_pfn( · line 661
Quoted 8 lines
...
kernel/power/snapshot.c +6
-0+#define SHRINK_BITE 10000 +long size, highmem_size, ret; + + highmem_size =count_highmem_pages () -2 * alloc_highmem; + size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES + -2 * alloc_normal;It'd be nice if this head-spinning arithmetic were spelled out in a comment somewhere. There are rather a lot of magic-number heuristics in here.
Well, yeah. I'll try to write up something. :-)
Quoted 6 lines
kernel/power/snapshot.c int swsusp_shrink_memory(void)
Quoted 4 lines
kernel/power/snapshot.c +0
-0tmp = size; size += highmem_size;for_each_populated_zone (zone) {@@ -621,27 +671,39 @@ int swsusp_shrink_memory(void)All looks pretty sane to me.
Great, thanks for the comments!
Andrew Morton
maintainerRe: [PATCH 3/3] PM/Hibernate: Use memory allocations to free memory
In reply to Rafael J. WysockiQuoted 21 lines · On Sat, 2 May 2009 00:29:38 +0200 "Rafael J. Wysocki" <[email protected]> wrote:
From: Rafael J. Wysocki <[email protected]>
Modify the hibernation memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary. Finally, remove the no longer used memory shrinking functions from
mm/vmscan.c....
kernel/power/snapshot.c +6
-3+static long alloc_and_mark_pages (struct memory_bitmap *bm,long nr_pages) { -if (tmp >SHRINK_BITE ) - tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); +long nr_normal =0 ; + +while (nr_pages-- >0 ) { +struct page *page; +
kernel/power/snapshot.c static unsigned long memory_bm_next_pfn( · line 628
Quoted 10 lines
kernel/power/snapshot.c +9
-0+ page =alloc_page (GFP_KERNEL | __GFP_HIGHMEM); +if (!page) +return -ENOMEM ; +memory_bm_set_bit (bm,page_to_pfn (page)); +if (!PageHighMem (page)) + nr_normal++; + } + +return nr_normal; }
Do we need the bitmap? I expect we can just string all these pages onto a local list via page.lru. Would need to check that - the pageframe fields are quite overloaded.
kernel/power/snapshot.c static unsigned long memory_bm_next_pfn( · line 661
Quoted 8 lines
...
kernel/power/snapshot.c +6
-0+#define SHRINK_BITE 10000 +long size, highmem_size, ret; + + highmem_size =count_highmem_pages () -2 * alloc_highmem; + size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES + -2 * alloc_normal;
It'd be nice if this head-spinning arithmetic were spelled out in a comment somewhere. There are rather a lot of magic-number heuristics in here.
kernel/power/snapshot.c int swsusp_shrink_memory(void)
Quoted 4 lines
kernel/power/snapshot.c +0
-0tmp = size; size += highmem_size;for_each_populated_zone (zone) {@@ -621,27 +671,39 @@ int swsusp_shrink_memory(void)
All looks pretty sane to me.
PATCH 3/3 PM/Hibernate: Use memory allocations to free memory
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Modify the hibernation memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary. Finally, remove the no longer used memory shrinking functions from mm/vmscan.c .
--- kernel/power/main.c | 25 +------- kernel/power/snapshot.c | 118 ++++++++++++++++++++++++++++++--------- mm/vmscan.c | 142 ------------------------------------------------ 3 files changed, 93 insertions(+), 192 deletions(-)
kernel/power/snapshot.c +90 -28
@@ -576,39 +576,89 @@ static unsigned long memory_bm_next_pfn(return bb->start_pfn + bit; } +/* Helper functions used for the shrinking of memory. */ +/** -* swsusp_shrink_memory - Try to free as much memory as needed -* -* ... but do not OOM-kill anyone +* free_marked_pages - release pages allocated during memory shrinking +* @bm: Memory bitmap where the allocated pages were marked. * -* Notice: all userland should be stopped before it is called, or -* livelock is possible. +* Free all pages marked in given memory bitmap. */ +static void free_marked_pages (struct memory_bitmap *bm) +{ +memory_bm_position_reset (bm); +for (;;) { +unsigned long pfn; +struct page *page; -#define SHRINK_BITE 10000 -static inline unsigned long __shrink_memory (long tmp) + pfn =memory_bm_next_pfn (bm); +if (pfn ==BM_END_OF_MAP ) +break ; + page =pfn_to_page (pfn); +__free_page (page); + } +} + +/** +* alloc_and_mark_page - allocate given number of pages and mark their PFNs +* @bm: Memory bitmap to use for marking allocated pages. +* @nr_pages: Number of pages to allocate. +* +* Allocate given number of pages and mark their PFNs in given memory bitmap, +* so that they can be released by free_marked_pages(). +* Return value: The number of normal (ie. non-highmem) pages allocated or +* -ENOMEM on failure. +*/ +static long alloc_and_mark_pages (struct memory_bitmap *bm,long nr_pages) { -if (tmp >SHRINK_BITE ) - tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); +long nr_normal =0 ; + +while (nr_pages-- >0 ) { +struct page *page; + + page =alloc_page (GFP_KERNEL | __GFP_HIGHMEM); +if (!page) +return -ENOMEM ; +memory_bm_set_bit (bm,page_to_pfn (page)); +if (!PageHighMem (page)) + nr_normal++; + } + +return nr_normal; } +#define SHRINK_BITE 10000 + +/** +* swsusp_shrink_memory - Try to make the kernel free as much memory as needed +*/ int swsusp_shrink_memory (void ) {long tmp;struct zone *zone; -unsigned long pages =0 ; +unsigned long pages =0 , alloc_normal =0 , alloc_highmem =0 ;unsigned int i =0 ;char *p ="-\\|/" ;struct timeval start, stop; +struct memory_bitmap *bm; +int error; + + bm =kzalloc (sizeof (*bm),GFP_KERNEL ); +if (!bm) +return -ENOMEM ; + error =memory_bm_create (bm,GFP_KERNEL ,PG_ANY ); +if (error) +return error;printk (KERN_INFO "PM: Shrinking memory... " );do_gettimeofday (&start); - do { - long size, highmem_size; - highmem_size = count_highmem_pages(); - size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES; +for (;;) { +long size, highmem_size, ret; + + highmem_size =count_highmem_pages () -2 * alloc_highmem; + size =count_data_pages () +PAGES_FOR_IO +SPARE_PAGES + -2 * alloc_normal; tmp = size; size += highmem_size;for_each_populated_zone (zone) {
@@ -621,27 +671,39 @@ int swsusp_shrink_memory(void) tmp += zone->lowmem_reserve[ZONE_NORMAL ]; } } -if (highmem_size <0 ) highmem_size =0 ; - tmp += highmem_size; -if (tmp >0 ) { - tmp =__shrink_memory (tmp); -if (!tmp) -return -ENOMEM ; - pages += tmp; - }else if (size > image_size /PAGE_SIZE ) { - tmp =__shrink_memory (size - (image_size /PAGE_SIZE )); - pages += tmp; + +if (tmp <=0 && size > image_size /PAGE_SIZE ) + tmp = size - (image_size /PAGE_SIZE ); + +if (tmp >SHRINK_BITE ) + tmp =SHRINK_BITE ; +else if (tmp <=0 ) +break ; + + ret =alloc_and_mark_pages (bm, tmp); +if (ret <0 ) { + error = -ENOMEM ; + goto out; } + alloc_normal += ret; + alloc_highmem += tmp - ret; + pages += tmp; +printk ("\b%c" , p[i++%4 ]); - }while (tmp >0 ); + } +do_gettimeofday (&stop); -printk ("\bdone (%lu pages freed)\n" , pages); +printk ("\bdone (preallocated %lu free pages)\n" , pages);swsusp_show_speed (&start, &stop, pages,"Freed" ); -return 0 ; + out: +free_marked_pages (bm); +memory_bm_free (bm,PG_UNSAFE_CLEAR ); + +return error; }/**
mm/vmscan.c +0 -142
148 lines not on this page · raw message
kernel/power/main.c +3 -22
@@ -195,9 +195,6 @@ static void suspend_test_finish(const ch#endif -/* This is just an arbitrary number */ -#define FREE_PAGE_NUMBER (100) -static struct platform_suspend_ops *suspend_ops;/**
@@ -233,7 +230,6 @@ int suspend_valid_only_mem(suspend_statestatic int suspend_prepare (void ) {int error; -unsigned int free_pages;if (!suspend_ops || !suspend_ops->enter)return -EPERM ;
@@ -250,26 +246,11 @@ static int suspend_prepare(void)if (suspend_freeze_processes ()) { error = -EAGAIN ; - goto Thaw; - } - - transition_in_progress = true; - - free_pages =global_page_state (NR_FREE_PAGES ); -if (free_pages <FREE_PAGE_NUMBER ) { -pr_debug ("PM: free some memory\n" ); -shrink_all_memory (FREE_PAGE_NUMBER - free_pages); -if (nr_free_pages () <FREE_PAGE_NUMBER ) { - error = -ENOMEM ; -printk (KERN_ERR "PM: No enough memory\n" ); - } - } -if (!error) + }else { + transition_in_progress = true;return 0 ; + } - transition_in_progress = false; - - Thaw:suspend_thaw_processes ();usermodehelper_enable (); Finish:
cover PM: Drop shrink_all_memory (was: Re: [Bug #13058] First hibernation attempt fails)
In reply to Andrew MortonQuoted 31 lines · Andrew Morton
Quoted 19 lines · On Wed, 22 Apr 2009 22:11:17 +0200 "Rafael J. Wysocki" <[email protected]> wrote:
Quoted 9 lines · Pavel Machek
Hi!
Quoted 7 lines
Of course, this will protect the calling task from getting oom-killed. But it doesn't protect other tasks from getting oom-killed due to the activity of _this_ task.
But I think that problem already exists, and that this proposal doesn't worsen anything, yes?
Quoted 8 lines
Quoted 2 lines
Or is it the case that all other tasks are safely stuck in the freezer at this time, so they won't be allocating any memory anyway?
That is the idea, yes. ... but we now have more threads that are not freezable... so they may allocate the memory.
Is it non-feasible to free memory without really going and allocating everything?
Quoted 8 lines
The question is whether there is a point. In principle we can just go and allocate as much as we need upfront. It shouldn't change anything, because we resume and suspend devices after creating the image anyway.
I think we could try to disable the OOM killer before suspend and just allocate the memory for the image right before devices are suspended for the first time.
Quoted 7 lines
It would be nice to do.
shrink_all_memory()is simply trying to do something which page reclaim doesn't expect to do (free memory when there's already lots of memory free). Consequently it doesn't do it very well, and there's a good risk that changes to core reclaim will accidentally breakshrink_all_memory().
OK, a patchset follows:
[1/3] - disable the OOM killer during system-wide power transitions (should be
done anyway IMO)
[2/3] - move swsusp_shrink_memory() to kernel/power/snapshot.c so that the
next patch is easier to read
[3/3] - drop shrink_all_memory()
Please have a look and tell me what you think.
Thanks,
Rafael
Re: [Bug #13058] First hibernation attempt fails
In reply to Linus TorvaldsQuoted 41 lines · Linus Torvalds
Quoted 3 lines · Jens Axboe
Given the somewhat odd nature of the bug and the requirements to trigger it, how confident are you in the bisection results?
I suspect it's timing-dependent.
The failure case is a ENOMEM returned from the "echo disk >
/sys/power/state", and sadly there are a _lot_ of potential sources of ENOMEM's in the path. And a numbe of them come fromGFP_ATOMICallocations etc.Now, that explains why it only happens while in X (more memory being used), and also why it succeeds the second time (the first try will have triggered VM activity and then free'd the pages it allocated up to that point).
IOW, I bet it would work on the first try if you were to just run something like
ptr = malloc(BIGNUM); memset(ptr, 0, BIGNUM); exit(0);first - just to make room for stuff.
And the thing is,
swsusp_save()really does do odd things. For example, to get rid of unnecessary memory, it does "drain_local_pages()", where the "local" is "local cpu". Why does it do that? Likely nobody knows.Now, that won't matter in Alan's case (he is UP), but the point is, the swsuspend code does these random things to try to free up memory, and I suspect it's mostly been a trial-and-error thing. And then subtle changes in memory usage when allocating or writing things out will change things.
For example, there is a magic "
PAGES_FOR_IO" #define, which is somewhat arbitrarily set to 4MB worth of pages. Where did that number come from? Who knows? But that's the number the code uses for the _initial_ check of "do we have enough memory" (the one that must have passed, since it actually started doing things and didn't print out a warning message).
Quoted 3 lines
Anyway, from the dmesg, we can see:
[ 41.873619] PM: Shrinking memory... Restarting tasks ... done.
Ah, thanks for pointing this out to me!
Quoted 7 lines
and this is a clear indication that it's "
swsusp_shrink_memory()" that failed. If it had succeeded, you'd have seenPM: Shrinking memory... done (xyz pages freed)
but it returned an error case, and then the suspend fails and starts restarting tasks.
AFAICS, there's only one possible situation in which that can happen, which is when shrink_all_memory() returns 0 and there was the assumption that this could not happen unless there _really_ was no memory to free. Apparently, that has recently changed and it is now possible that shrink_all_memory() returns 0, even though there still is some memory to free.
At the moment I don't see what change caused that to happen, but shouldn't we put .nr_reclaimed = 0 in the definition of sc in shrink_all_memory()?
Rafael
Re: [Bug #13058] First hibernation attempt fails
In reply to Jens AxboeQuoted 23 lines · Jens Axboe
Quoted 22 lines · Alan Jenkins
Quoted 20 lines · Jens Axboe
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13058
Subject : First hibernation attempt fails
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-10 10:58 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1faa16d22877f4839bd433547d770c676d1d964c
References : http://marc.info/?l=linux-kernel&m=123928022321917&w=2Alan, is this still a problem?
Quoted 6 lines
Quoted 1 line
Yup. Still present in v2.6.30-rc2-195-g9f76208.
Given the somewhat odd nature of the bug and the requirements to trigger it, how confident are you in the bisection results?
I'll try and reproduce it here.
I can't reproduce it here. It seems very odd that an ENOMEM would happen as a consequence of the rq allocation change, it doesn't really change the allocation at all (and it'll never return -ENOMEM).
Can you please recheck the git bisect results. It'd be nice if the hibernation failure would actually log where the problem occured...
Signature · 1 line
Jens Axboe
Re: [Bug #13058] First hibernation attempt fails
Quoted 36 lines · Jens Axboe
Quoted 26 lines · Jens Axboe
Quoted 24 lines · Alan Jenkins
Quoted 22 lines · Jens Axboe
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13058
Subject : First hibernation attempt fails
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-10 10:58 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1faa16d22877f4839bd433547d770c676d1d964c
References : http://marc.info/?l=linux-kernel&m=123928022321917&w=2Alan, is this still a problem?
Quoted 7 lines
Quoted 2 lines
Yup. Still present in v2.6.30-rc2-195-g9f76208.
Given the somewhat odd nature of the bug and the requirements to trigger it, how confident are you in the bisection results?
I'll try and reproduce it here.
Quoted 7 lines
I can't reproduce it here. It seems very odd that an ENOMEM would happen as a consequence of the rq allocation change, it doesn't really change the allocation at all (and it'll never return
-ENOMEM).Can you please recheck the git bisect results. It'd be nice if the hibernation failure would actually log where the problem occured...
Once I found the right conditions (wireless disabled and a specific KDE session), it was 100% reproducible.
Reverting your commit fixed the problem. I can do another test of that if you like.
My _bisection_ was not absolute, rock-solid certain because I only found the right conditions half-way through. There's always the possibility I would get different results if I redid it properly, from the start. But I have some experience of this and took care to re-validate my upper & lower bounds.
Re: [Bug #13058] First hibernation attempt fails
Quoted 48 lines · Alan Jenkins
Quoted 36 lines · Jens Axboe
Quoted 26 lines · Jens Axboe
Quoted 24 lines · Alan Jenkins
Quoted 22 lines · Jens Axboe
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13058
Subject : First hibernation attempt fails
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-10 10:58 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1faa16d22877f4839bd433547d770c676d1d964c
References : http://marc.info/?l=linux-kernel&m=123928022321917&w=2Alan, is this still a problem?
Quoted 7 lines
Quoted 2 lines
Yup. Still present in v2.6.30-rc2-195-g9f76208.
Given the somewhat odd nature of the bug and the requirements to trigger it, how confident are you in the bisection results?
I'll try and reproduce it here.
Quoted 7 lines
I can't reproduce it here. It seems very odd that an ENOMEM would happen as a consequence of the rq allocation change, it doesn't really change the allocation at all (and it'll never return
-ENOMEM).Can you please recheck the git bisect results. It'd be nice if the hibernation failure would actually log where the problem occured...
Once I found the right conditions (wireless disabled and a specific KDE session), it was 100% reproducible.
Quoted 8 lines
Reverting your commit fixed the problem. I can do another test of that if you like.
My _bisection_ was not absolute, rock-solid certain because I only found the right conditions half-way through. There's always the possibility I would get different results if I redid it properly, from the start. But I have some experience of this and took care to re-validate my upper & lower bounds.
Well, if you can and have the time, reproducing the bisect results with the same conditions all the way through would definitely help.
Or perhaps Rafael can suggest adding some printk()'s to catch where that ENOMEM is coming from. That would help, right now I basically have zero clue on where this might be.
Signature · 1 line
Jens Axboe
Re: [Bug #13058] First hibernation attempt fails
Quoted 68 lines · Jens Axboe
Quoted 56 lines · Alan Jenkins
Quoted 43 lines · Jens Axboe
Quoted 31 lines · Jens Axboe
Quoted 28 lines · Alan Jenkins
Quoted 25 lines · Jens Axboe
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13058
Subject : First hibernation attempt fails
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-10 10:58 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1faa16d22877f4839bd433547d770c676d1d964c
References : http://marc.info/?l=linux-kernel&m=123928022321917&w=2Alan, is this still a problem?
Quoted 9 lines
Quoted 3 lines
Yup. Still present in v2.6.30-rc2-195-g9f76208.
Given the somewhat odd nature of the bug and the requirements to trigger it, how confident are you in the bisection results?
I'll try and reproduce it here.
Quoted 8 lines
I can't reproduce it here. It seems very odd that an ENOMEM would happen as a consequence of the rq allocation change, it doesn't really change the allocation at all (and it'll never return
-ENOMEM).Can you please recheck the git bisect results. It'd be nice if the hibernation failure would actually log where the problem occured...
Once I found the right conditions (wireless disabled and a specific KDE session), it was 100% reproducible.
Quoted 9 lines
Reverting your commit fixed the problem. I can do another test of that if you like.
My _bisection_ was not absolute, rock-solid certain because I only found the right conditions half-way through. There's always the possibility I would get different results if I redid it properly, from the start. But I have some experience of this and took care to re-validate my upper & lower bounds.
Quoted 3 lines
Well, if you can and have the time, reproducing the bisect results with the same conditions all the way through would definitely help.
I can do that, yes.
As another datapoint: I tried blindly applying the commit to 2.6.29. The resulting kernel was able to hibernate fine the first time.
I'm going to be annoying and try something slightly different. In theory, I should be able to find the "first bad commit" where cherry-picking 1faa16d22 causes a problem.
Quoted 4 lines
Or perhaps Rafael can suggest adding some printk()'s to catch where that ENOMEM is coming from. That would help, right now I basically have zero clue on where this might be.
Re: [Bug #13058] First hibernation attempt fails
Quoted 3 lines · Alan Jenkins
As another datapoint: I tried blindly applying the commit to 2.6.29. The resulting kernel was able to hibernate fine the first time.
Yeah, so it's not that commit per se that causes it. I bet it needs all the IO scheduler changes too - and even when it does that, the end result probably is really just a timing change.
Quoted 3 lines
I'm going to be annoying and try something slightly different. In theory, I should be able to find the "first bad commit" where cherry-picking
1faa16d22causes a problem.
Just for fun, try this one first and see if it makes any difference.
Maybe the whole "swappiness=0" part was intentional. And maybe it wasn't. This is one trivial patch. Maybe it makes your machine blow up. Who knows?
There are other differences in the shrink_all_memory() path wrt the normal memory freeing paths, but they are way more subtle. So I'm suggesting tryign this not becasue I think it's "The Bug(tm)", but because it's an easy test to make, and maybe it makes a difference.
Linus
--- mm/vmscan.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
mm/vmscan.c +2 -0
@@ -2113,6 +2113,8 @@ unsigned long shrink_all_memory(unsigned long nr_pages)struct scan_control sc = { .gfp_mask =GFP_KERNEL , .may_unmap =0 , + .swap_cluster_max =SWAP_CLUSTER_MAX , + .swappiness = vm_swappiness, .may_writepage =1 , .isolate_pages = isolate_pages_global, };
Re: [Bug #13058] First hibernation attempt fails
Quoted 37 lines · Linus Torvalds
Quoted 3 lines · Alan Jenkins
As another datapoint: I tried blindly applying the commit to 2.6.29. The resulting kernel was able to hibernate fine the first time.
Yeah, so it's not that commit per se that causes it. I bet it needs all the IO scheduler changes too - and even when it does that, the end result probably is really just a timing change.
Quoted 4 lines
I'm going to be annoying and try something slightly different. In theory, I should be able to find the "first bad commit" where cherry-picking
1faa16d22causes a problem.Just for fun, try this one first and see if it makes any difference.
Maybe the whole "swappiness=0" part was intentional. And maybe it wasn't. This is one trivial patch. Maybe it makes your machine blow up. Who knows?
There are other differences in the
shrink_all_memory()path wrt the normal memory freeing paths, but they are way more subtle. So I'm suggesting tryign this not becasue I think it's "The Bug(tm)", but because it's an easy test to make, and maybe it makes a difference.Linus
--- mm/vmscan.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)mm/vmscan.c +0
-0
mm/vmscan.c unsigned long shrink_all_memory(unsigned long nr_pages) · line 2120
Quoted 8 lines
mm/vmscan.c +2
-0@@ -2113,6 +2113,8 @@ unsigned long shrink_all_memory(unsigned long nr_pages)struct scan_control sc = { .gfp_mask =GFP_KERNEL , .may_unmap =0 , + .swap_cluster_max =SWAP_CLUSTER_MAX , + .swappiness = vm_swappiness, .may_writepage =1 , .isolate_pages = isolate_pages_global, };
No, that doesn't seem to affect it.
Thanks
Alan
Re: [Bug #13058] First hibernation attempt fails
Quoted 41 lines · Alan Jenkins
Quoted 40 lines · Linus Torvalds
Quoted 3 lines · Alan Jenkins
As another datapoint: I tried blindly applying the commit to 2.6.29. The resulting kernel was able to hibernate fine the first time.
Yeah, so it's not that commit per se that causes it. I bet it needs all the IO scheduler changes too - and even when it does that, the end result probably is really just a timing change.
Quoted 4 lines
I'm going to be annoying and try something slightly different. In theory, I should be able to find the "first bad commit" where cherry-picking
1faa16d22causes a problem.Just for fun, try this one first and see if it makes any difference.
Maybe the whole "swappiness=0" part was intentional. And maybe it wasn't. This is one trivial patch. Maybe it makes your machine blow up. Who knows?
There are other differences in the
shrink_all_memory()path wrt the normal memory freeing paths, but they are way more subtle. So I'm suggesting tryign this not becasue I think it's "The Bug(tm)", but because it's an easy test to make, and maybe it makes a difference.Linus
--- mm/vmscan.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)mm/vmscan.c +1
-0@@ -2113,6 +2113,8 @@ unsigned long shrink_all_memory(unsigned long nr_pages)struct scan_control sc = { .gfp_mask =GFP_KERNEL , .may_unmap =0 , + .swap_cluster_max =SWAP_CLUSTER_MAX ,
Quoted 8 lines
mm/vmscan.c unsigned long shrink_all_memory(unsigned long nr_pages) · line 2120
Quoted 5 lines
mm/vmscan.c +1
-0+ .swappiness = vm_swappiness, .may_writepage = 1, .isolate_pages = isolate_pages_global, };No, that doesn't seem to affect it.
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Rafael
--- mm/vmscan.c | 8 ++++++++ 1 file changed, 8 insertions(+)
mm/vmscan.c +8 -0
@@ -2115,6 +2115,7 @@ unsigned long shrink_all_memory(unsigned .may_unmap = 0, .may_writepage = 1, .isolate_pages = isolate_pages_global, + .nr_reclaimed = 0, }; current->reclaim_state = &reclaim_state;
@@ -2135,6 +2136,8 @@ unsigned long shrink_all_memory(unsigned nr_slab -= reclaim_state.reclaimed_slab; } +printk (KERN_INFO "before: sc.nr_reclaimed = %lu\n" , sc.nr_reclaimed); +/* * We try to shrink LRUs in 5 passes: * 0 = Reclaim from inactive_list only
@@ -2168,6 +2171,10 @@ unsigned long shrink_all_memory(unsignedif (sc.nr_scanned && prio <DEF_PRIORITY -2 )congestion_wait (WRITE ,HZ /10 ); + +printk (KERN_INFO "pass = %d, prio = %d, " +"sc.nr_reclaimed = %lu\n" , pass, prio, + sc.nr_reclaimed); } }
@@ -2184,6 +2191,7 @@ unsigned long shrink_all_memory(unsigned reclaim_state.reclaimed_slab > 0); } +printk (KERN_INFO "after: sc.nr_reclaimed = %lu\n" , sc.nr_reclaimed); out: current->reclaim_state =NULL ;
Re: [Bug #13058] First hibernation attempt fails
Quoted 3 lines · Rafael J. Wysocki
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Maybe something like this instead (or in addition to).
It does "show_mem()" when memory shrinking fails. It will show a _lot_ of data.
Untested, but trivial.
Linus
--- kernel/power/swsusp.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-)
kernel/power/swsusp.c +8 -1
@@ -207,9 +207,16 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,#define SHRINK_BITE 10000static inline unsigned long __shrink_memory (long tmp) { +unsigned long ret; +if (tmp >SHRINK_BITE ) tmp =SHRINK_BITE ; -return shrink_all_memory (tmp); + ret =shrink_all_memory (tmp); +if (!ret) { +printk ("shrink_all_memory(%ld) failed\n" , tmp); +show_mem (); + } +return ret; }int swsusp_shrink_memory (void )
Re: [Bug #13058] First hibernation attempt fails
Quoted 6 lines · Linus Torvalds
Quoted 3 lines · Rafael J. Wysocki
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Quoted 9 lines
Maybe something like this instead (or in addition to).
It does "
show_mem()" when memory shrinking fails. It will show a _lot_ of data.Untested, but trivial.
Linus
---
Ok, I applied both your and Rafael's debug patches. dmesg attached.
After the failed hibernation, I noticed my touchpad wasn't working. But I think that's something else. I had another go and couldn't reproduce that. It's happened to me once before while testing 2.6.30-; I've also had the keyboard stop working at least once. I'm hoping it's the same bug as "20 ACPI interrupts per second on EEEPC" bug. It could be overloading my bug-ridden EC, which also acts as the keyboard controller.
Thanks
Alan
[ 0.000000] Linux version 2.6.30-rc2eeepc (alan@alan-desktop) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #240 Sat Apr 18 08:47:04 BST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f780000 (usable) [ 0.000000] BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved) [ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1f780 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01F800000 mask FFF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] init_memory_mapping: 0000000000000000-000000001f780000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 001f600000 page 2M [ 0.000000] 001f600000 - 001f780000 page 4k [ 0.000000] kernel direct mapping tables up to 1f780000 @ 10000-16000 [ 0.000000] RAMDISK: 17724000 - 179df533 [ 0.000000] ACPI: RSDP 000fbe50 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 1f780000 00034 (v01 A M I OEMRSDT 03000911 MSFT 00000097) [ 0.000000] ACPI: FACP 1f780200 00081 (v01 A M I OEMFACP 03000911 MSFT 00000097) [ 0.000000] ACPI: DSDT 1f780400 06069 (v01 A0797 A0797000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 1f790000 00040 [ 0.000000] ACPI: APIC 1f780390 00068 (v01 A M I OEMAPIC 03000911 MSFT 00000097) [ 0.000000] ACPI: OEMB 1f790040 00046 (v01 A M I AMI_OEM 03000911 MSFT 00000097) [ 0.000000] ACPI: MCFG 1f786470 0003C (v01 A M I OEMMCFG 03000911 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 503MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1f780000 [ 0.000000] low ram: 0 - 1f780000 [ 0.000000] node 0 low ram: 00000000 - 1f780000 [ 0.000000] node 0 bootmap 00012000 - 00015ef0 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001f780000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 00008ec0ac] TEXT DATA BSS ==> [0000100000 - 00008ec0ac] [ 0.000000] #2 [0017724000 - 00179df533] RAMDISK ==> [0017724000 - 00179df533] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [00008ed000 - 00008f41f4] BRK ==> [00008ed000 - 00008f41f4] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001f780 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001f780 [ 0.000000] On node 0 totalpages: 128783 [ 0.000000] free_area_init_node: node 0, pgdat c043836c, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123825 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127776 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-rc2eeepc root=/dev/sda2 ro root=/dev/sda2 rootfstype=ext4 resume=/dev/sda2 resume_offset=9732 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:288 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 630.041 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 2847 kB [ 0.003333] per task-struct memory footprint: 1152 bytes [ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.003333] Memory: 499536k/515584k available (2045k kernel code, 15424k reserved, 1290k data, 248k init, 0k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) [ 0.003333] vmalloc : 0xdff80000 - 0xfffa8000 ( 512 MB) [ 0.003333] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB) [ 0.003333] .init : 0xc0446000 - 0xc0484000 ( 248 kB) [ 0.003333] .data : 0xc02ff503 - 0xc04420a8 (1290 kB) [ 0.003333] .text : 0xc0100000 - 0xc02ff503 (2045 kB) [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.003383] Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.58 BogoMIPS (lpj=2100136) [ 0.003680] Mount-cache hash table entries: 512 [ 0.006328] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006474] CPU: L2 cache: 512K [ 0.006681] [ds] using Pentium M configuration [ 0.006778] [ds] pebs not available [ 0.006874] Intel machine check architecture supported. [ 0.006978] Intel machine check reporting enabled on CPU#0. [ 0.007093] CPU: Intel(R) Celeron(R) M processor 900MHz stepping 08 [ 0.007298] Checking 'hlt' instruction... OK. [ 0.020678] ACPI: Core revision 20090320 [ 0.054619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089999] PM: Adding info for No Bus:platform [ 0.089999] net_namespace: 1136 bytes [ 0.091819] NET: Registered protocol family 16 [ 0.092936] PM: Adding info for No Bus:vtcon0 [ 0.093174] ACPI: bus type pci registered [ 0.093492] PM: Adding info for No Bus:id [ 0.093715] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.093827] PCI: Not using MMCONFIG. [ 0.094216] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.094321] PCI: Using configuration type 1 for base access [ 0.097919] PM: Adding info for No Bus:default [ 0.098189] bio: create slab <bio-0> at 0 [ 0.120455] ACPI: EC: Look up EC in DSDT [ 0.157798] ACPI: Interpreter enabled [ 0.157918] ACPI: (supports S0 S1 S3 S4 S5) [ 0.158404] ACPI: Using IOAPIC for interrupt routing [ 0.158727] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168936] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.169048] PCI: Using MMCONFIG for extended config space [ 0.169477] PM: Adding info for acpi:LNXSYSTM:00 [ 0.169626] PM: Adding info for acpi:LNXPWRBN:00 [ 0.169822] PM: Adding info for acpi:ACPI_CPU:00 [ 0.170102] PM: Adding info for acpi:device:00 [ 0.170883] PM: Adding info for acpi:PNP0A08:00 [ 0.171147] PM: Adding info for acpi:PNP0C01:00 [ 0.172036] PM: Adding info for acpi:device:01 [ 0.172887] PM: Adding info for acpi:device:02 [ 0.173746] PM: Adding info for acpi:device:03 [ 0.174591] PM: Adding info for acpi:device:04 [ 0.175430] PM: Adding info for acpi:device:05 [ 0.175645] PM: Adding info for acpi:device:06 [ 0.175889] PM: Adding info for acpi:PNP0000:00 [ 0.176126] PM: Adding info for acpi:PNP0200:00 [ 0.176365] PM: Adding info for acpi:PNP0100:00 [ 0.176595] PM: Adding info for acpi:PNP0B00:00 [ 0.177248] PM: Adding info for acpi:PNP0303:00 [ 0.177887] PM: Adding info for acpi:SYN0A00:00 [ 0.178138] PM: Adding info for acpi:PNP0800:00 [ 0.178369] PM: Adding info for acpi:PNP0C04:00 [ 0.178642] PM: Adding info for acpi:PNP0C09:00 [ 0.179538] PM: Adding info for acpi:PNP0C02:00 [ 0.180313] PM: Adding info for acpi:PNP0C02:01 [ 0.180635] PM: Adding info for acpi:PNP0C02:02 [ 0.181419] PM: Adding info for acpi:PNP0C0A:00 [ 0.181728] PM: Adding info for acpi:ACPI0003:00 [ 0.181973] PM: Adding info for acpi:device:07 [ 0.182314] PM: Adding info for acpi:device:08 [ 0.182516] PM: Adding info for acpi:device:09 [ 0.182729] PM: Adding info for acpi:device:0a [ 0.182938] PM: Adding info for acpi:device:0b [ 0.183138] PM: Adding info for acpi:device:0c [ 0.183359] PM: Adding info for acpi:device:0d [ 0.184311] PM: Adding info for acpi:device:0e [ 0.185157] PM: Adding info for acpi:device:0f [ 0.186004] PM: Adding info for acpi:device:10 [ 0.186868] PM: Adding info for acpi:device:11 [ 0.187718] PM: Adding info for acpi:device:12 [ 0.188563] PM: Adding info for acpi:device:13 [ 0.188768] PM: Adding info for acpi:device:14 [ 0.188975] PM: Adding info for acpi:device:15 [ 0.189218] PM: Adding info for acpi:device:16 [ 0.189482] PM: Adding info for acpi:device:17 [ 0.189692] PM: Adding info for acpi:device:18 [ 0.189901] PM: Adding info for acpi:device:19 [ 0.190214] PM: Adding info for acpi:PNP0C02:03 [ 0.190461] PM: Adding info for acpi:PNP0C01:01 [ 0.190717] PM: Adding info for acpi:ASUS010:00 [ 0.191022] PM: Adding info for acpi:PNP0C0D:00 [ 0.191261] PM: Adding info for acpi:PNP0C0E:00 [ 0.191524] PM: Adding info for acpi:PNP0C0C:00 [ 0.192134] PM: Adding info for acpi:PNP0C0F:00 [ 0.192742] PM: Adding info for acpi:PNP0C0F:01 [ 0.193381] PM: Adding info for acpi:PNP0C0F:02 [ 0.193995] PM: Adding info for acpi:PNP0C0F:03 [ 0.194603] PM: Adding info for acpi:PNP0C0F:04 [ 0.195217] PM: Adding info for acpi:PNP0C0F:05 [ 0.195822] PM: Adding info for acpi:PNP0C0F:06 [ 0.196441] PM: Adding info for acpi:PNP0C0F:07 [ 0.196750] PM: Adding info for acpi:LNXTHERM:00 [ 0.196918] PM: Adding info for acpi:LNXTHERM:01 [ 0.198033] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.198143] ACPI: EC: driver started in poll mode [ 0.199451] ACPI: No dock devices found. [ 0.199837] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.200126] PM: Adding info for No Bus:pci0000:00 [ 0.200185] PM: Adding info for No Bus:0000:00 [ 0.200727] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff] [ 0.200750] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07] [ 0.200771] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.200792] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff] [ 0.200940] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff] [ 0.201254] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff] [ 0.201385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.201498] pci 0000:00:1b.0: PME# disabled [ 0.201765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.201875] pci 0000:00:1c.0: PME# disabled [ 0.202149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.202258] pci 0000:00:1c.1: PME# disabled [ 0.202530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.202640] pci 0000:00:1c.2: PME# disabled [ 0.202874] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f] [ 0.203025] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f] [ 0.203171] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f] [ 0.203357] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f] [ 0.203514] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff] [ 0.203656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.203766] pci 0000:00:1d.7: PME# disabled [ 0.204179] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.204200] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.204345] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.204456] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff [ 0.204654] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.204676] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.204697] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.204718] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.204739] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf] [ 0.204818] pci 0000:00:1f.2: PME# supported from D3hot [ 0.204923] pci 0000:00:1f.2: PME# disabled [ 0.205133] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.205489] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff] [ 0.205568] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff] [ 0.205660] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.205769] pci 0000:03:00.0: PME# disabled [ 0.205986] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.206602] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.206781] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff] [ 0.206803] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff] [ 0.206953] pci 0000:00:1e.0: transparent bridge [ 0.207127] pci_bus 0000:00: on NUMA node 0 [ 0.207163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.207966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.208205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.208423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.210386] PM: Adding info for pci:0000:00:00.0 [ 0.211916] PM: Adding info for pci:0000:00:02.0 [ 0.213433] PM: Adding info for pci:0000:00:02.1 [ 0.214949] PM: Adding info for pci:0000:00:1b.0 [ 0.216467] PM: Adding info for pci:0000:00:1c.0 [ 0.218010] PM: Adding info for pci:0000:00:1c.1 [ 0.219556] PM: Adding info for pci:0000:00:1c.2 [ 0.221113] PM: Adding info for pci:0000:00:1d.0 [ 0.222645] PM: Adding info for pci:0000:00:1d.1 [ 0.224187] PM: Adding info for pci:0000:00:1d.2 [ 0.225707] PM: Adding info for pci:0000:00:1d.3 [ 0.227255] PM: Adding info for pci:0000:00:1d.7 [ 0.228776] PM: Adding info for pci:0000:00:1e.0 [ 0.230327] PM: Adding info for pci:0000:00:1f.0 [ 0.231851] PM: Adding info for pci:0000:00:1f.2 [ 0.233389] PM: Adding info for pci:0000:00:1f.3 [ 0.233495] PM: Adding info for No Bus:0000:04 [ 0.233670] PM: Adding info for pci:0000:03:00.0 [ 0.233766] PM: Adding info for No Bus:0000:03 [ 0.233860] PM: Adding info for No Bus:0000:01 [ 0.233954] PM: Adding info for No Bus:0000:05 [ 0.234819] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.236014] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.237213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.238398] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.239594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.240922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.242230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.243558] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.245027] SCSI subsystem initialized [ 0.261558] libata version 3.00 loaded. [ 0.262173] PCI: Using ACPI for IRQ routing [ 0.263385] PM: Adding info for No Bus:lo [ 0.264418] hpet clockevent registered [ 0.264428] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.264545] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.264828] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.271687] pnp: PnP ACPI init [ 0.271877] PM: Adding info for No Bus:pnp0 [ 0.271893] ACPI: bus type pnp registered [ 0.272885] PM: Adding info for pnp:00:00 [ 0.273212] PM: Adding info for pnp:00:01 [ 0.273611] PM: Adding info for pnp:00:02 [ 0.273858] PM: Adding info for pnp:00:03 [ 0.274294] PM: Adding info for pnp:00:04 [ 0.274900] PM: Adding info for pnp:00:05 [ 0.275125] PM: Adding info for pnp:00:06 [ 0.275354] PM: Adding info for pnp:00:07 [ 0.276366] PM: Adding info for pnp:00:08 [ 0.277396] PM: Adding info for pnp:00:09 [ 0.277961] PM: Adding info for pnp:00:0a [ 0.278869] PM: Adding info for pnp:00:0b [ 0.280118] PM: Adding info for pnp:00:0c [ 0.281660] pnp: PnP ACPI: found 13 devices [ 0.281760] ACPI: ACPI bus type pnp unregistered [ 0.281908] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.282081] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.282191] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.284081] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.284193] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.284303] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.284415] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.284532] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.284697] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.284809] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.284941] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.285082] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.285216] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.285327] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.285439] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.285552] system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved [ 0.285848] PM: Adding info for No Bus:mem [ 0.286031] PM: Adding info for No Bus:kmem [ 0.286113] PM: Adding info for No Bus:null [ 0.286192] PM: Adding info for No Bus:port [ 0.286272] PM: Adding info for No Bus:zero [ 0.286353] PM: Adding info for No Bus:full [ 0.286432] PM: Adding info for No Bus:random [ 0.286515] PM: Adding info for No Bus:urandom [ 0.286596] PM: Adding info for No Bus:kmsg [ 0.322170] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.322276] pci 0000:00:1c.0: IO window: disabled [ 0.322384] pci 0000:00:1c.0: MEM window: disabled [ 0.322488] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.322601] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.322703] pci 0000:00:1c.1: IO window: disabled [ 0.322811] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff [ 0.322920] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.323032] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01 [ 0.323135] pci 0000:00:1c.2: IO window: disabled [ 0.323242] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff [ 0.323365] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff [ 0.323516] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.323620] pci 0000:00:1e.0: IO window: disabled [ 0.323727] pci 0000:00:1e.0: MEM window: disabled [ 0.323831] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.323975] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.324093] pci 0000:00:1c.0: setting latency timer to 64 [ 0.324122] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.324234] pci 0000:00:1c.1: setting latency timer to 64 [ 0.324265] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.324377] pci 0000:00:1c.2: setting latency timer to 64 [ 0.324401] pci 0000:00:1e.0: setting latency timer to 64 [ 0.324417] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.324428] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.324440] pci_bus 0000:04: resource 0 mem: [0x0-0x0] [ 0.324449] pci_bus 0000:04: resource 1 mem: [0x0-0x0] [ 0.324459] pci_bus 0000:04: resource 2 mem: [0x0-0x0] [ 0.324468] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 0.324478] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 0.324488] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.324498] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.324508] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.324518] pci_bus 0000:01: resource 0 mem: [0x0-0x0] [ 0.324528] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff] [ 0.324538] pci_bus 0000:01: resource 2 mem: [0xf0000000-0xf6ffffff] [ 0.324548] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.324558] pci_bus 0000:05: resource 0 mem: [0x0-0x0] [ 0.324568] pci_bus 0000:05: resource 1 mem: [0x0-0x0] [ 0.324577] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 0.324587] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.324597] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.324808] NET: Registered protocol family 2 [ 0.325624] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.328069] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.328653] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) [ 0.334218] TCP: Hash tables configured (established 16384 bind 16384) [ 0.334466] TCP reno registered [ 0.335018] NET: Registered protocol family 1 [ 0.335898] checking if image is initramfs... [ 0.619267] rootfs image is initramfs; unpacking... [ 0.619490] Freeing initrd memory: 2797k freed [ 0.625139] PM: Adding info for platform:pcspkr [ 0.625980] PM: Adding info for No Bus:snapshot [ 0.626432] audit: initializing netlink socket (disabled) [ 0.626714] type=2000 audit(1240041427.623:1): initialized [ 0.669232] msgmni has been set to 981 [ 0.681678] alg: No test for stdrng (krng) [ 0.681904] io scheduler noop registered [ 0.682001] io scheduler anticipatory registered [ 0.682098] io scheduler deadline registered [ 0.682290] io scheduler cfq registered (default) [ 0.682435] pci 0000:00:02.0: Boot video device [ 0.683544] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.683588] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.683665] PM: Adding info for pci_express:0000:00:1c.0:pcie01 [ 0.683764] PM: Adding info for pci_express:0000:00:1c.0:pcie04 [ 0.683853] PM: Adding info for pci_express:0000:00:1c.0:pcie08 [ 0.684182] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.684223] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.684286] PM: Adding info for pci_express:0000:00:1c.1:pcie01 [ 0.684376] PM: Adding info for pci_express:0000:00:1c.1:pcie04 [ 0.684465] PM: Adding info for pci_express:0000:00:1c.1:pcie08 [ 0.684788] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.684828] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.684901] PM: Adding info for pci_express:0000:00:1c.2:pcie01 [ 0.685002] PM: Adding info for pci_express:0000:00:1c.2:pcie04 [ 0.685092] PM: Adding info for pci_express:0000:00:1c.2:pcie08 [ 0.685625] PM: Adding info for No Bus:tty [ 0.685804] PM: Adding info for No Bus:console [ 0.685893] PM: Adding info for No Bus:tty0 [ 0.686028] PM: Adding info for No Bus:vcs [ 0.686199] PM: Adding info for No Bus:vcsa [ 0.686340] PM: Adding info for No Bus:tty1 [ 0.686422] PM: Adding info for No Bus:tty2 [ 0.686503] PM: Adding info for No Bus:tty3 [ 0.686591] PM: Adding info for No Bus:tty4 [ 0.686708] PM: Adding info for No Bus:tty5 [ 0.686790] PM: Adding info for No Bus:tty6 [ 0.686872] PM: Adding info for No Bus:tty7 [ 0.686952] PM: Adding info for No Bus:tty8 [ 0.687033] PM: Adding info for No Bus:tty9 [ 0.687115] PM: Adding info for No Bus:tty10 [ 0.687197] PM: Adding info for No Bus:tty11 [ 0.687279] PM: Adding info for No Bus:tty12 [ 0.687362] PM: Adding info for No Bus:tty13 [ 0.687445] PM: Adding info for No Bus:tty14 [ 0.687532] PM: Adding info for No Bus:tty15 [ 0.687621] PM: Adding info for No Bus:tty16 [ 0.687705] PM: Adding info for No Bus:tty17 [ 0.687788] PM: Adding info for No Bus:tty18 [ 0.687871] PM: Adding info for No Bus:tty19 [ 0.687956] PM: Adding info for No Bus:tty20 [ 0.688040] PM: Adding info for No Bus:tty21 [ 0.688125] PM: Adding info for No Bus:tty22 [ 0.688210] PM: Adding info for No Bus:tty23 [ 0.688294] PM: Adding info for No Bus:tty24 [ 0.688379] PM: Adding info for No Bus:tty25 [ 0.688464] PM: Adding info for No Bus:tty26 [ 0.688551] PM: Adding info for No Bus:tty27 [ 0.688643] PM: Adding info for No Bus:tty28 [ 0.688730] PM: Adding info for No Bus:tty29 [ 0.688814] PM: Adding info for No Bus:tty30 [ 0.688910] PM: Adding info for No Bus:tty31 [ 0.688997] PM: Adding info for No Bus:tty32 [ 0.689083] PM: Adding info for No Bus:tty33 [ 0.689168] PM: Adding info for No Bus:tty34 [ 0.689257] PM: Adding info for No Bus:tty35 [ 0.689346] PM: Adding info for No Bus:tty36 [ 0.689432] PM: Adding info for No Bus:tty37 [ 0.689521] PM: Adding info for No Bus:tty38 [ 0.689610] PM: Adding info for No Bus:tty39 [ 0.689702] PM: Adding info for No Bus:tty40 [ 0.689789] PM: Adding info for No Bus:tty41 [ 0.689875] PM: Adding info for No Bus:tty42 [ 0.689979] PM: Adding info for No Bus:tty43 [ 0.690073] PM: Adding info for No Bus:tty44 [ 0.690161] PM: Adding info for No Bus:tty45 [ 0.690249] PM: Adding info for No Bus:tty46 [ 0.690340] PM: Adding info for No Bus:tty47 [ 0.690427] PM: Adding info for No Bus:tty48 [ 0.690514] PM: Adding info for No Bus:tty49 [ 0.690601] PM: Adding info for No Bus:tty50 [ 0.690699] PM: Adding info for No Bus:tty51 [ 0.690795] PM: Adding info for No Bus:tty52 [ 0.690884] PM: Adding info for No Bus:tty53 [ 0.690972] PM: Adding info for No Bus:tty54 [ 0.691062] PM: Adding info for No Bus:tty55 [ 0.691151] PM: Adding info for No Bus:tty56 [ 0.691241] PM: Adding info for No Bus:tty57 [ 0.691329] PM: Adding info for No Bus:tty58 [ 0.691419] PM: Adding info for No Bus:tty59 [ 0.691509] PM: Adding info for No Bus:tty60 [ 0.691598] PM: Adding info for No Bus:tty61 [ 0.691690] PM: Adding info for No Bus:tty62 [ 0.691783] PM: Adding info for No Bus:tty63 [ 0.692242] PM: Adding info for No Bus:ptmx [ 0.692376] PM: Adding info for No Bus:hpet [ 0.692860] PM: Adding info for No Bus:ram0 [ 0.693080] PM: Adding info for No Bus:1:0 [ 0.693328] PM: Adding info for No Bus:ram1 [ 0.693504] PM: Adding info for No Bus:1:1 [ 0.693673] PM: Adding info for No Bus:ram2 [ 0.693776] PM: Adding info for No Bus:1:2 [ 0.693931] PM: Adding info for No Bus:ram3 [ 0.694031] PM: Adding info for No Bus:1:3 [ 0.694179] PM: Adding info for No Bus:ram4 [ 0.694279] PM: Adding info for No Bus:1:4 [ 0.694428] PM: Adding info for No Bus:ram5 [ 0.694528] PM: Adding info for No Bus:1:5 [ 0.694683] PM: Adding info for No Bus:ram6 [ 0.694786] PM: Adding info for No Bus:1:6 [ 0.694934] PM: Adding info for No Bus:ram7 [ 0.695034] PM: Adding info for No Bus:1:7 [ 0.695254] PM: Adding info for No Bus:ram8 [ 0.695356] PM: Adding info for No Bus:1:8 [ 0.695516] PM: Adding info for No Bus:ram9 [ 0.695624] PM: Adding info for No Bus:1:9 [ 0.695776] PM: Adding info for No Bus:ram10 [ 0.695879] PM: Adding info for No Bus:1:10 [ 0.696029] PM: Adding info for No Bus:ram11 [ 0.696132] PM: Adding info for No Bus:1:11 [ 0.696281] PM: Adding info for No Bus:ram12 [ 0.696382] PM: Adding info for No Bus:1:12 [ 0.696539] PM: Adding info for No Bus:ram13 [ 0.696663] PM: Adding info for No Bus:1:13 [ 0.696819] PM: Adding info for No Bus:ram14 [ 0.696922] PM: Adding info for No Bus:1:14 [ 0.697131] PM: Adding info for No Bus:ram15 [ 0.697235] PM: Adding info for No Bus:1:15 [ 0.697306] brd: module loaded [ 0.697483] Driver 'sd' needs updating - please use bus_type methods [ 0.697721] ahci 0000:00:1f.2: version 3.0 [ 0.697830] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.698002] ahci 0000:00:1f.2: PCI INT B disabled [ 0.698120] ahci: probe of 0000:00:1f.2 failed with error -22 [ 0.698392] ata_piix 0000:00:1f.2: version 2.12 [ 0.698417] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.698534] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.698996] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.730030] scsi0 : ata_piix [ 0.730680] PM: Adding info for No Bus:host0 [ 0.730811] PM: Adding info for No Bus:host0 [ 0.731401] scsi1 : ata_piix [ 0.731533] PM: Adding info for No Bus:host1 [ 0.731652] PM: Adding info for No Bus:host1 [ 0.731718] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.731827] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.732397] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.732844] PM: Adding info for platform:i8042 [ 0.744856] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.745179] PM: Adding info for No Bus:mice [ 0.745381] PM: Adding info for No Bus:psaux [ 0.745425] mice: PS/2 mouse device common for all mice [ 0.745683] rtc_cmos 00:03: RTC can wake from S4 [ 0.746094] PM: Adding info for No Bus:rtc0 [ 0.746297] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.746455] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.746645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 0.746861] PM: Adding info for platform:iTCO_wdt [ 0.747067] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) [ 0.747329] PM: Adding info for No Bus:watchdog [ 0.747373] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.747486] iTCO_vendor_support: vendor-support=0 [ 0.747634] cpuidle: using governor ladder [ 0.747730] cpuidle: using governor menu [ 0.748124] Advanced Linux Sound Architecture Driver Version 1.0.19. [ 0.748229] ALSA device list: [ 0.748317] No soundcards found. [ 0.750861] TCP cubic registered [ 0.750960] Using IPI Shortcut mode [ 0.751178] PM: Adding info for No Bus:cpu_dma_latency [ 0.751285] PM: Adding info for No Bus:network_latency [ 0.751430] PM: Adding info for No Bus:network_throughput [ 0.751877] PM: Adding info for serio:serio0 [ 0.766668] Switched to NOHz mode on CPU #0 [ 0.785428] PM: Adding info for No Bus:input0 [ 0.785904] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.077108] ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 [ 1.077218] ata2.00: 7815024 sectors, multi 0: LBA [ 1.090333] ata2.00: configured for UDMA/66 [ 1.091809] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 [ 1.092182] PM: Adding info for No Bus:target1:0:0 [ 1.092455] PM: Adding info for scsi:1:0:0:0 [ 1.093328] PM: Adding info for No Bus:1:0:0:0 [ 1.093676] PM: Adding info for No Bus:1:0:0:0 [ 1.094012] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB) [ 1.094233] sd 1:0:0:0: [sda] Write Protect is off [ 1.094335] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.094481] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.094751] PM: Adding info for No Bus:sda [ 1.095712] sda: sda1 sda2 [ 1.097080] PM: Adding info for No Bus:sda1 [ 1.097597] PM: Adding info for No Bus:sda2 [ 1.098014] PM: Adding info for No Bus:8:0 [ 1.098101] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.098628] PM: Resume from partition /dev/sda2 [ 1.098635] PM: Checking hibernation image. [ 1.100964] PM: Resume from disk failed. [ 1.101675] rtc_cmos 00:03: setting system clock to 2009-04-18 07:57:09 UTC (1240041429) [ 1.101828] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 1.102623] Freeing unused kernel memory: 248k freed [ 1.354542] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.366312] PM: Adding info for No Bus:thermal_zone0 [ 1.374534] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.374695] ACPI: Thermal Zone [TZ00] (32 C) [ 2.907760] PM: Starting manual resume from disk [ 2.907929] PM: Resume from partition 8:2 [ 2.907936] PM: Checking hibernation image. [ 2.909243] PM: Resume from disk failed. [ 2.933167] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.933184] PM: Basic memory bitmaps created [ 2.959910] PM: Basic memory bitmaps freed [ 2.983990] EXT4-fs: delayed allocation enabled [ 2.984099] EXT4-fs: file extents enabled [ 2.984438] EXT4-fs: mballoc enabled [ 2.984810] EXT4-fs: mounted filesystem sda2 without journal [ 3.756901] udev: starting version 140 [ 3.757127] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly [ 4.367545] PM: Adding info for No Bus:event0 [ 4.931001] PM: Adding info for No Bus:input1 [ 4.931103] input: Power Button (FF) as /class/input/input1 [ 4.931455] PM: Adding info for No Bus:event1 [ 4.931506] ACPI: Power Button (FF) [PWRF] [ 4.931906] PM: Adding info for No Bus:input2 [ 4.931998] input: Lid Switch as /class/input/input2 [ 4.932204] PM: Adding info for No Bus:event2 [ 4.972490] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 4.973043] PM: Adding info for No Bus:cooling_device0 [ 4.973110] processor ACPI_CPU:00: registered as cooling_device0 [ 4.973236] ACPI: Processor [CPU1] (supports 8 throttling states) [ 4.974976] ACPI: Lid Switch [LID] [ 4.975331] PM: Adding info for No Bus:input3 [ 4.975435] input: Sleep Button (CM) as /class/input/input3 [ 4.975672] PM: Adding info for No Bus:event3 [ 4.975724] ACPI: Sleep Button (CM) [SLPB] [ 4.976022] PM: Adding info for No Bus:input4 [ 4.976111] input: Power Button (CM) as /class/input/input4 [ 4.976329] PM: Adding info for No Bus:event4 [ 4.976378] ACPI: Power Button (CM) [PWRB] [ 4.978561] PM: Adding info for No Bus:AC0 [ 4.979193] ACPI: AC Adapter [AC0] (on-line) [ 4.985710] ACPI: Battery Slot [BAT0] (battery absent) [ 5.004861] eeepc: Eee PC Hotkey Driver [ 5.069203] eeepc: Hotkey init flags 0x41 [ 5.070976] eeepc: Get control methods supported: 0x101711 [ 5.071300] PM: Adding info for No Bus:input5 [ 5.071416] input: Asus EeePC extra buttons as /class/input/input5 [ 5.071662] PM: Adding info for No Bus:event5 [ 5.074524] PM: Adding info for No Bus:rfkill0 [ 5.075359] PM: Adding info for No Bus:eeepc [ 5.132746] Linux agpgart interface v0.103 [ 5.151614] PM: Adding info for No Bus:hwmon0 [ 5.151977] PM: Adding info for platform:eeepc [ 5.153770] PM: Adding info for No Bus:acpi_video0 [ 5.154276] PM: Adding info for No Bus:acpi_video1 [ 5.154446] PM: Adding info for No Bus:acpi_video2 [ 5.154876] PM: Adding info for No Bus:input6 [ 5.154985] input: Video Bus as /class/input/input6 [ 5.155248] PM: Adding info for No Bus:event6 [ 5.155302] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.223386] PM: Adding info for No Bus:timer [ 5.233463] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 5.233573] Copyright (c) 2007 Atheros Corporation. [ 5.233791] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.233921] atl2 0000:03:00.0: setting latency timer to 64 [ 5.305094] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 5.305772] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 5.310942] PM: Adding info for No Bus:agpgart [ 5.311077] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 5.319675] intel_rng: FWH not detected [ 5.411157] PM: Adding info for No Bus:eth0 [ 5.523056] usbcore: registered new interface driver usbfs [ 5.523545] usbcore: registered new interface driver hub [ 5.523849] usbcore: registered new device driver usb [ 5.530701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.530935] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.531122] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.531136] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.532185] PM: Adding info for No Bus:usb_host1 [ 5.534328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.538507] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.538619] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.538676] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00 [ 5.546610] PM: Adding info for No Bus:input7 [ 5.546771] input: PC Speaker as /class/input/input7 [ 5.547022] PM: Adding info for No Bus:event7 [ 5.550078] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.551704] PM: Adding info for usb:usb1 [ 5.552178] usb usb1: configuration #1 chosen from 1 choice [ 5.552926] PM: Adding info for usb:1-0:1.0 [ 5.553232] hub 1-0:1.0: USB hub found [ 5.553602] hub 1-0:1.0: 8 ports detected [ 5.555191] PM: Adding info for No Bus:usbdev1.1_ep81 [ 5.555871] PM: Adding info for No Bus:usbdev1.1_ep00 [ 5.647899] uhci_hcd: USB Universal Host Controller Interface driver [ 5.648189] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.648326] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.648340] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.648543] PM: Adding info for No Bus:usb_host2 [ 5.648859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.649061] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400 [ 5.649595] PM: Adding info for usb:usb2 [ 5.649718] usb usb2: configuration #1 chosen from 1 choice [ 5.651724] PM: Adding info for usb:2-0:1.0 [ 5.651801] hub 2-0:1.0: USB hub found [ 5.652197] hub 2-0:1.0: 2 ports detected [ 5.652608] PM: Adding info for No Bus:usbdev2.1_ep81 [ 5.652841] PM: Adding info for No Bus:usbdev2.1_ep00 [ 5.652974] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.653101] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.653113] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.653303] PM: Adding info for No Bus:usb_host3 [ 5.653810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.654041] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480 [ 5.654534] PM: Adding info for usb:usb3 [ 5.654653] usb usb3: configuration #1 chosen from 1 choice [ 5.654880] PM: Adding info for usb:3-0:1.0 [ 5.654951] hub 3-0:1.0: USB hub found [ 5.655074] hub 3-0:1.0: 2 ports detected [ 5.655364] PM: Adding info for No Bus:usbdev3.1_ep81 [ 5.655576] PM: Adding info for No Bus:usbdev3.1_ep00 [ 5.655707] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.655833] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.655845] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.656038] PM: Adding info for No Bus:usb_host4 [ 5.656106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.656322] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 [ 5.656829] PM: Adding info for usb:usb4 [ 5.656953] usb usb4: configuration #1 chosen from 1 choice [ 5.657185] PM: Adding info for usb:4-0:1.0 [ 5.657257] hub 4-0:1.0: USB hub found [ 5.657380] hub 4-0:1.0: 2 ports detected [ 5.657667] PM: Adding info for No Bus:usbdev4.1_ep81 [ 5.657884] PM: Adding info for No Bus:usbdev4.1_ep00 [ 5.658007] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.658134] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.658146] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.658338] PM: Adding info for No Bus:usb_host5 [ 5.658405] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.658616] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880 [ 5.659096] PM: Adding info for usb:usb5 [ 5.659222] usb usb5: configuration #1 chosen from 1 choice [ 5.659443] PM: Adding info for usb:5-0:1.0 [ 5.659521] hub 5-0:1.0: USB hub found [ 5.659642] hub 5-0:1.0: 2 ports detected [ 5.659926] PM: Adding info for No Bus:usbdev5.1_ep81 [ 5.660167] PM: Adding info for No Bus:usbdev5.1_ep00 [ 5.695102] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.696043] PM: Adding info for No Bus:i2c-0 [ 5.850185] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.850463] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.886850] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 6.012032] PM: Adding info for usb:1-5 [ 6.012250] usb 1-5: configuration #1 chosen from 1 choice [ 6.013122] PM: Adding info for usb:1-5:1.0 [ 6.013417] PM: Adding info for No Bus:usbdev1.2_ep01 [ 6.013598] PM: Adding info for No Bus:usbdev1.2_ep82 [ 6.013816] PM: Adding info for No Bus:usbdev1.2_ep00 [ 6.130124] usb 1-8: new high speed USB device using ehci_hcd and address 3 [ 6.251446] PM: Adding info for No Bus:pcmC0D0p [ 6.251926] PM: Adding info for No Bus:pcmC0D0c [ 6.253233] PM: Adding info for No Bus:dsp [ 6.253995] PM: Adding info for No Bus:audio [ 6.254687] PM: Adding info for No Bus:hwC0D0 [ 6.254874] PM: Adding info for No Bus:controlC0 [ 6.255245] PM: Adding info for No Bus:mixer [ 6.259028] PM: Adding info for usb:1-8 [ 6.259171] usb 1-8: configuration #1 chosen from 1 choice [ 6.259540] PM: Adding info for usb:1-8:1.0 [ 6.259746] PM: Adding info for No Bus:usbdev1.3_ep81 [ 6.259907] PM: Adding info for usb:1-8:1.1 [ 6.260184] PM: Adding info for No Bus:usbdev1.3_ep82 [ 6.260408] PM: Adding info for No Bus:usbdev1.3_ep00 [ 6.386655] usual_tables: module license 'unspecified' taints kernel. [ 6.386816] Disabling lockdep due to kernel taint [ 6.439651] Linux video capture interface: v2.00 [ 6.446770] Marking TSC unstable due to TSC halts in idle [ 6.456417] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761) [ 6.614887] PM: Adding info for No Bus:video0 [ 6.615051] usbcore: registered new interface driver uvcvideo [ 6.615165] USB Video Class driver (v0.1.0) [ 6.763383] Clocksource tsc unstable (delta = -96153146 ns) [ 6.853199] PM: Adding info for No Bus:vcs2 [ 6.853297] PM: Adding info for No Bus:vcsa2 [ 6.861768] PM: Adding info for No Bus:vcs3 [ 6.861864] PM: Adding info for No Bus:vcsa3 [ 6.868203] PM: Adding info for No Bus:vcs4 [ 6.868299] PM: Adding info for No Bus:vcsa4 [ 6.870832] PM: Adding info for No Bus:vcs5 [ 6.870920] PM: Adding info for No Bus:vcsa5 [ 6.875213] PM: Adding info for No Bus:vcs6 [ 6.875298] PM: Adding info for No Bus:vcsa6 [ 7.854286] EXT4 FS on sda2, no journal [ 8.280115] Adding 524280k swap on /swapfile. Priority:-1 extents:1683 across:3168868k [ 9.510557] NET: Registered protocol family 10 [ 9.512717] lo: Disabled Privacy Extensions [ 12.962439] PM: Adding info for No Bus:vcs7 [ 12.962543] PM: Adding info for No Bus:vcsa7 [ 15.819409] [drm] Initialized drm 1.1.0 20060810 [ 16.163239] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.163261] pci 0000:00:02.0: setting latency timer to 64 [ 16.169550] PM: Adding info for No Bus:card0 [ 16.170451] [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling. [ 16.170513] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 17.740069] atl2 0000:03:00.0: irq 27 for MSI/MSI-X [ 17.740537] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.945294] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 17.945411] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.075778] NET: Registered protocol family 17 [ 27.973369] eth0: no IPv6 routers present [ 57.549665] PM: Adding info for No Bus:vcs63 [ 57.549769] PM: Adding info for No Bus:vcsa63 [ 57.551117] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 60.580288] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 60.580304] PM: Basic memory bitmaps created [ 60.580627] PM: Adding info for No Bus:vcs8 [ 60.580727] PM: Adding info for No Bus:vcsa8 [ 61.125471] Syncing filesystems ... done. [ 61.132711] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 61.134847] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 61.135207] PM: Shrinking memory... <6>before: sc.nr_reclaimed = 0 [ 61.180993] pass = 0, prio = 12, sc.nr_reclaimed = 0 [ 61.181004] pass = 0, prio = 11, sc.nr_reclaimed = 0 [ 61.181014] pass = 0, prio = 10, sc.nr_reclaimed = 0 [ 61.181024] pass = 0, prio = 9, sc.nr_reclaimed = 0 [ 61.181033] pass = 0, prio = 8, sc.nr_reclaimed = 0 [ 61.181043] pass = 0, prio = 7, sc.nr_reclaimed = 0 [ 61.186509] pass = 0, prio = 6, sc.nr_reclaimed = 0 [ 61.186525] pass = 0, prio = 5, sc.nr_reclaimed = 0 [ 61.186534] pass = 0, prio = 4, sc.nr_reclaimed = 0 [ 61.186544] pass = 0, prio = 3, sc.nr_reclaimed = 0 [ 61.333383] pass = 0, prio = 2, sc.nr_reclaimed = 7746 [ 61.436711] pass = 0, prio = 1, sc.nr_reclaimed = 1957 [ 61.556712] pass = 0, prio = 0, sc.nr_reclaimed = 4528 [ 61.556729] pass = 1, prio = 12, sc.nr_reclaimed = 0 [ 61.556739] pass = 1, prio = 11, sc.nr_reclaimed = 0 [ 61.556749] pass = 1, prio = 10, sc.nr_reclaimed = 0 [ 61.556759] pass = 1, prio = 9, sc.nr_reclaimed = 0 [ 61.556768] pass = 1, prio = 8, sc.nr_reclaimed = 0 [ 61.556778] pass = 1, prio = 7, sc.nr_reclaimed = 0 [ 61.556787] pass = 1, prio = 6, sc.nr_reclaimed = 0 [ 61.556797] pass = 1, prio = 5, sc.nr_reclaimed = 0 [ 61.556806] pass = 1, prio = 4, sc.nr_reclaimed = 0 [ 61.556816] pass = 1, prio = 3, sc.nr_reclaimed = 0 [ 61.556825] pass = 1, prio = 2, sc.nr_reclaimed = 0 [ 61.556835] pass = 1, prio = 1, sc.nr_reclaimed = 0 [ 61.595841] pass = 1, prio = 0, sc.nr_reclaimed = 0 [ 61.595854] pass = 2, prio = 12, sc.nr_reclaimed = 0 [ 61.595864] pass = 2, prio = 11, sc.nr_reclaimed = 0 [ 61.595873] pass = 2, prio = 10, sc.nr_reclaimed = 0 [ 61.595883] pass = 2, prio = 9, sc.nr_reclaimed = 0 [ 61.710044] pass = 2, prio = 8, sc.nr_reclaimed = 2895 [ 61.710062] pass = 2, prio = 7, sc.nr_reclaimed = 0 [ 61.710072] pass = 2, prio = 6, sc.nr_reclaimed = 0 [ 61.710081] pass = 2, prio = 5, sc.nr_reclaimed = 0 [ 61.710091] pass = 2, prio = 4, sc.nr_reclaimed = 0 [ 61.710100] pass = 2, prio = 3, sc.nr_reclaimed = 0 [ 61.710110] pass = 2, prio = 2, sc.nr_reclaimed = 0 [ 61.710119] pass = 2, prio = 1, sc.nr_reclaimed = 0 [ 61.823378] pass = 2, prio = 0, sc.nr_reclaimed = 1802 [ 61.823396] pass = 3, prio = 12, sc.nr_reclaimed = 0 [ 61.823406] pass = 3, prio = 11, sc.nr_reclaimed = 0 [ 61.823416] pass = 3, prio = 10, sc.nr_reclaimed = 0 [ 61.823425] pass = 3, prio = 9, sc.nr_reclaimed = 0 [ 61.823435] pass = 3, prio = 8, sc.nr_reclaimed = 0 [ 61.823444] pass = 3, prio = 7, sc.nr_reclaimed = 0 [ 61.823454] pass = 3, prio = 6, sc.nr_reclaimed = 0 [ 61.823464] pass = 3, prio = 5, sc.nr_reclaimed = 0 [ 61.823473] pass = 3, prio = 4, sc.nr_reclaimed = 0 [ 61.823483] pass = 3, prio = 3, sc.nr_reclaimed = 0 [ 61.823492] pass = 3, prio = 2, sc.nr_reclaimed = 0 [ 61.823502] pass = 3, prio = 1, sc.nr_reclaimed = 0 [ 62.586707] pass = 3, prio = 0, sc.nr_reclaimed = 2716 [ 62.608037] pass = 4, prio = 12, sc.nr_reclaimed = 3070 [ 62.634644] pass = 4, prio = 11, sc.nr_reclaimed = 5048 [ 62.638782] pass = 4, prio = 10, sc.nr_reclaimed = 192 [ 62.740052] pass = 4, prio = 9, sc.nr_reclaimed = 0 [ 62.843385] pass = 4, prio = 8, sc.nr_reclaimed = 640 [ 62.946726] pass = 4, prio = 7, sc.nr_reclaimed = 640 [ 63.046711] pass = 4, prio = 6, sc.nr_reclaimed = 640 [ 63.146717] pass = 4, prio = 5, sc.nr_reclaimed = 608 [ 63.246712] pass = 4, prio = 4, sc.nr_reclaimed = 600 [ 63.346704] pass = 4, prio = 3, sc.nr_reclaimed = 128 [ 63.446698] pass = 4, prio = 2, sc.nr_reclaimed = 0 [ 63.546705] pass = 4, prio = 1, sc.nr_reclaimed = 0 [ 63.646698] pass = 4, prio = 0, sc.nr_reclaimed = 0 [ 63.646708] after: sc.nr_reclaimed = 0 [ 63.646715] shrink_all_memory(10000) failed [ 63.646722] Mem-Info: [ 63.646729] DMA per-cpu: [ 63.646738] CPU 0: hi: 0, btch: 1 usd: 0 [ 63.646745] Normal per-cpu: [ 63.646753] CPU 0: hi: 186, btch: 31 usd: 182 [ 63.646769] Active_anon:0 active_file:0 inactive_anon:0 [ 63.646773] inactive_file:22 unevictable:1098 dirty:0 writeback:0 unstable:0 [ 63.646779] free:91278 slab:1984 mapped:953 pagetables:529 bounce:0 [ 63.646796] DMA free:8008kB min:88kB low:108kB high:132kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB present:15804kB pages_scanned:0 all_unreclaimable? no [ 63.646809] lowmem_reserve[]: 0 483 483 [ 63.646833] Normal free:357104kB min:2764kB low:3452kB high:4144kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:88kB unevictable:4392kB present:495300kB pages_scanned:176 all_unreclaimable? no [ 63.646847] lowmem_reserve[]: 0 0 0 [ 63.646862] DMA: 2*4kB 6*8kB 3*16kB 3*32kB 2*64kB 2*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 1*4096kB = 8008kB [ 63.646906] Normal: 298*4kB 269*8kB 214*16kB 154*32kB 119*64kB 75*128kB 66*256kB 44*512kB 26*1024kB 14*2048kB 57*4096kB = 357104kB [ 63.646951] 972 total pagecache pages [ 63.646958] 0 pages in swap cache [ 63.646966] Swap cache stats: add 6615, delete 6615, find 0/0 [ 63.646974] Free swap = 497820kB [ 63.646980] Total swap = 524280kB [ 63.652111] 128880 pages RAM [ 63.652119] 3192 pages reserved [ 63.652126] 37178 pages shared [ 63.652132] 4437 pages non-shared [ 63.652177] Restarting tasks ... done. [ 63.671646] PM: Basic memory bitmaps freed [ 64.521472] PM: Removing info for No Bus:vcs63 [ 64.521642] PM: Removing info for No Bus:vcsa63 [ 65.267700] atl2 0000:03:00.0: irq 27 for MSI/MSI-X [ 65.268233] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.270982] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 65.271111] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 75.913359] eth0: no IPv6 routers present
Re: [Bug #13058] First hibernation attempt fails
Quoted 18 lines · Alan Jenkins
Quoted 8 lines · Linus Torvalds
Quoted 3 lines · Rafael J. Wysocki
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Maybe something like this instead (or in addition to).
Quoted 8 lines
It does "
show_mem()" when memory shrinking fails. It will show a _lot_ of data.Untested, but trivial.
Linus
---
Quoted 8 lines
Ok, I applied both your and Rafael's debug patches. dmesg attached.
After the failed hibernation, I noticed my touchpad wasn't working. But I think that's something else. I had another go and couldn't reproduce that. It's happened to me once before while testing 2.6.30-; I've also had the keyboard stop working at least once. I'm hoping it's the same bug as "20 ACPI interrupts per second on EEEPC" bug. It could be overloading my bug-ridden EC, which also acts as the keyboard controller.
Thanks for testing!
Clearly, sc.nr_reclaimed is reset in each iteration of the loop in shrink_all_memory():
[ 61.135207] PM: Shrinking memory... <6>before: sc.nr_reclaimed = 0 [ 61.180993] pass = 0, prio = 12, sc.nr_reclaimed = 0 [ 61.181004] pass = 0, prio = 11, sc.nr_reclaimed = 0 [ 61.181014] pass = 0, prio = 10, sc.nr_reclaimed = 0 [ 61.181024] pass = 0, prio = 9, sc.nr_reclaimed = 0 [ 61.181033] pass = 0, prio = 8, sc.nr_reclaimed = 0 [ 61.181043] pass = 0, prio = 7, sc.nr_reclaimed = 0 [ 61.186509] pass = 0, prio = 6, sc.nr_reclaimed = 0 [ 61.186525] pass = 0, prio = 5, sc.nr_reclaimed = 0 [ 61.186534] pass = 0, prio = 4, sc.nr_reclaimed = 0 [ 61.186544] pass = 0, prio = 3, sc.nr_reclaimed = 0 [ 61.333383] pass = 0, prio = 2, sc.nr_reclaimed = 7746 [ 61.436711] pass = 0, prio = 1, sc.nr_reclaimed = 1957 [ 61.556712] pass = 0, prio = 0, sc.nr_reclaimed = 4528 [ 61.556729] pass = 1, prio = 12, sc.nr_reclaimed = 0 [ 61.556739] pass = 1, prio = 11, sc.nr_reclaimed = 0 [ 61.556749] pass = 1, prio = 10, sc.nr_reclaimed = 0 [ 61.556759] pass = 1, prio = 9, sc.nr_reclaimed = 0 [ 61.556768] pass = 1, prio = 8, sc.nr_reclaimed = 0 [ 61.556778] pass = 1, prio = 7, sc.nr_reclaimed = 0 [ 61.556787] pass = 1, prio = 6, sc.nr_reclaimed = 0 [ 61.556797] pass = 1, prio = 5, sc.nr_reclaimed = 0 [ 61.556806] pass = 1, prio = 4, sc.nr_reclaimed = 0 [ 61.556816] pass = 1, prio = 3, sc.nr_reclaimed = 0 [ 61.556825] pass = 1, prio = 2, sc.nr_reclaimed = 0 [ 61.556835] pass = 1, prio = 1, sc.nr_reclaimed = 0 [ 61.595841] pass = 1, prio = 0, sc.nr_reclaimed = 0 [ 61.595854] pass = 2, prio = 12, sc.nr_reclaimed = 0 [ 61.595864] pass = 2, prio = 11, sc.nr_reclaimed = 0 [ 61.595873] pass = 2, prio = 10, sc.nr_reclaimed = 0 [ 61.595883] pass = 2, prio = 9, sc.nr_reclaimed = 0 [ 61.710044] pass = 2, prio = 8, sc.nr_reclaimed = 2895 [ 61.710062] pass = 2, prio = 7, sc.nr_reclaimed = 0 [ 61.710072] pass = 2, prio = 6, sc.nr_reclaimed = 0 [ 61.710081] pass = 2, prio = 5, sc.nr_reclaimed = 0 [ 61.710091] pass = 2, prio = 4, sc.nr_reclaimed = 0 [ 61.710100] pass = 2, prio = 3, sc.nr_reclaimed = 0 [ 61.710110] pass = 2, prio = 2, sc.nr_reclaimed = 0 [ 61.710119] pass = 2, prio = 1, sc.nr_reclaimed = 0 [ 61.823378] pass = 2, prio = 0, sc.nr_reclaimed = 1802 [ 61.823396] pass = 3, prio = 12, sc.nr_reclaimed = 0 [ 61.823406] pass = 3, prio = 11, sc.nr_reclaimed = 0 [ 61.823416] pass = 3, prio = 10, sc.nr_reclaimed = 0 [ 61.823425] pass = 3, prio = 9, sc.nr_reclaimed = 0 [ 61.823435] pass = 3, prio = 8, sc.nr_reclaimed = 0 [ 61.823444] pass = 3, prio = 7, sc.nr_reclaimed = 0 [ 61.823454] pass = 3, prio = 6, sc.nr_reclaimed = 0 [ 61.823464] pass = 3, prio = 5, sc.nr_reclaimed = 0 [ 61.823473] pass = 3, prio = 4, sc.nr_reclaimed = 0 [ 61.823483] pass = 3, prio = 3, sc.nr_reclaimed = 0 [ 61.823492] pass = 3, prio = 2, sc.nr_reclaimed = 0 [ 61.823502] pass = 3, prio = 1, sc.nr_reclaimed = 0 [ 62.586707] pass = 3, prio = 0, sc.nr_reclaimed = 2716 [ 62.608037] pass = 4, prio = 12, sc.nr_reclaimed = 3070 [ 62.634644] pass = 4, prio = 11, sc.nr_reclaimed = 5048 [ 62.638782] pass = 4, prio = 10, sc.nr_reclaimed = 192 [ 62.740052] pass = 4, prio = 9, sc.nr_reclaimed = 0 [ 62.843385] pass = 4, prio = 8, sc.nr_reclaimed = 640 [ 62.946726] pass = 4, prio = 7, sc.nr_reclaimed = 640 [ 63.046711] pass = 4, prio = 6, sc.nr_reclaimed = 640 [ 63.146717] pass = 4, prio = 5, sc.nr_reclaimed = 608 [ 63.246712] pass = 4, prio = 4, sc.nr_reclaimed = 600 [ 63.346704] pass = 4, prio = 3, sc.nr_reclaimed = 128 [ 63.446698] pass = 4, prio = 2, sc.nr_reclaimed = 0 [ 63.546705] pass = 4, prio = 1, sc.nr_reclaimed = 0 [ 63.646698] pass = 4, prio = 0, sc.nr_reclaimed = 0 [ 63.646708] after: sc.nr_reclaimed = 0 [ 63.646715] shrink_all_memory(10000) failed
which obviously is done by shrink_all_zones(). Sigh.
The appended patch should help, please verify.
Thanks,
Rafael
--- mm/vmscan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
mm/vmscan.c +3 -2
@@ -2088,13 +2088,13 @@ static void shrink_all_zones(unsigned lo nr_reclaimed +=shrink_list (l, nr_to_scan, zone, sc, prio);if (nr_reclaimed >= nr_pages) { - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed;return ; } } } } - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed; }/*
@@ -2115,6 +2115,7 @@ unsigned long shrink_all_memory(unsigned .may_unmap = 0, .may_writepage = 1, .isolate_pages = isolate_pages_global, + .nr_reclaimed = 0, }; current->reclaim_state = &reclaim_state;
Re: [Bug #13058] First hibernation attempt fails
Quoted 106 lines · Rafael J. Wysocki
Quoted 20 lines · Alan Jenkins
Quoted 9 lines · Linus Torvalds
Quoted 4 lines · Rafael J. Wysocki
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Maybe something like this instead (or in addition to).
Quoted 9 lines
It does "
show_mem()" when memory shrinking fails. It will show a _lot_ of data.Untested, but trivial.
Linus
---Quoted 9 lines
Ok, I applied both your and Rafael's debug patches. dmesg attached.
After the failed hibernation, I noticed my touchpad wasn't working. But I think that's something else. I had another go and couldn't reproduce that. It's happened to me once before while testing 2.6.30-; I've also had the keyboard stop working at least once. I'm hoping it's the same bug as "20 ACPI interrupts per second on EEEPC" bug. It could be overloading my bug-ridden EC, which also acts as the keyboard controller.
Thanks for testing!
Clearly, sc.nr_reclaimed is reset in each iteration of the loop in
shrink_all_memory():[ 61.135207] PM: Shrinking memory... <6>before: sc.nr_reclaimed = 0 [ 61.180993] pass = 0, prio = 12, sc.nr_reclaimed = 0 [ 61.181004] pass = 0, prio = 11, sc.nr_reclaimed = 0 [ 61.181014] pass = 0, prio = 10, sc.nr_reclaimed = 0 [ 61.181024] pass = 0, prio = 9, sc.nr_reclaimed = 0 [ 61.181033] pass = 0, prio = 8, sc.nr_reclaimed = 0 [ 61.181043] pass = 0, prio = 7, sc.nr_reclaimed = 0 [ 61.186509] pass = 0, prio = 6, sc.nr_reclaimed = 0 [ 61.186525] pass = 0, prio = 5, sc.nr_reclaimed = 0 [ 61.186534] pass = 0, prio = 4, sc.nr_reclaimed = 0 [ 61.186544] pass = 0, prio = 3, sc.nr_reclaimed = 0 [ 61.333383] pass = 0, prio = 2, sc.nr_reclaimed = 7746 [ 61.436711] pass = 0, prio = 1, sc.nr_reclaimed = 1957 [ 61.556712] pass = 0, prio = 0, sc.nr_reclaimed = 4528 [ 61.556729] pass = 1, prio = 12, sc.nr_reclaimed = 0 [ 61.556739] pass = 1, prio = 11, sc.nr_reclaimed = 0 [ 61.556749] pass = 1, prio = 10, sc.nr_reclaimed = 0 [ 61.556759] pass = 1, prio = 9, sc.nr_reclaimed = 0 [ 61.556768] pass = 1, prio = 8, sc.nr_reclaimed = 0 [ 61.556778] pass = 1, prio = 7, sc.nr_reclaimed = 0 [ 61.556787] pass = 1, prio = 6, sc.nr_reclaimed = 0 [ 61.556797] pass = 1, prio = 5, sc.nr_reclaimed = 0 [ 61.556806] pass = 1, prio = 4, sc.nr_reclaimed = 0 [ 61.556816] pass = 1, prio = 3, sc.nr_reclaimed = 0 [ 61.556825] pass = 1, prio = 2, sc.nr_reclaimed = 0 [ 61.556835] pass = 1, prio = 1, sc.nr_reclaimed = 0 [ 61.595841] pass = 1, prio = 0, sc.nr_reclaimed = 0 [ 61.595854] pass = 2, prio = 12, sc.nr_reclaimed = 0 [ 61.595864] pass = 2, prio = 11, sc.nr_reclaimed = 0 [ 61.595873] pass = 2, prio = 10, sc.nr_reclaimed = 0 [ 61.595883] pass = 2, prio = 9, sc.nr_reclaimed = 0 [ 61.710044] pass = 2, prio = 8, sc.nr_reclaimed = 2895 [ 61.710062] pass = 2, prio = 7, sc.nr_reclaimed = 0 [ 61.710072] pass = 2, prio = 6, sc.nr_reclaimed = 0 [ 61.710081] pass = 2, prio = 5, sc.nr_reclaimed = 0 [ 61.710091] pass = 2, prio = 4, sc.nr_reclaimed = 0 [ 61.710100] pass = 2, prio = 3, sc.nr_reclaimed = 0 [ 61.710110] pass = 2, prio = 2, sc.nr_reclaimed = 0 [ 61.710119] pass = 2, prio = 1, sc.nr_reclaimed = 0 [ 61.823378] pass = 2, prio = 0, sc.nr_reclaimed = 1802 [ 61.823396] pass = 3, prio = 12, sc.nr_reclaimed = 0 [ 61.823406] pass = 3, prio = 11, sc.nr_reclaimed = 0 [ 61.823416] pass = 3, prio = 10, sc.nr_reclaimed = 0 [ 61.823425] pass = 3, prio = 9, sc.nr_reclaimed = 0 [ 61.823435] pass = 3, prio = 8, sc.nr_reclaimed = 0 [ 61.823444] pass = 3, prio = 7, sc.nr_reclaimed = 0 [ 61.823454] pass = 3, prio = 6, sc.nr_reclaimed = 0 [ 61.823464] pass = 3, prio = 5, sc.nr_reclaimed = 0 [ 61.823473] pass = 3, prio = 4, sc.nr_reclaimed = 0 [ 61.823483] pass = 3, prio = 3, sc.nr_reclaimed = 0 [ 61.823492] pass = 3, prio = 2, sc.nr_reclaimed = 0 [ 61.823502] pass = 3, prio = 1, sc.nr_reclaimed = 0 [ 62.586707] pass = 3, prio = 0, sc.nr_reclaimed = 2716 [ 62.608037] pass = 4, prio = 12, sc.nr_reclaimed = 3070 [ 62.634644] pass = 4, prio = 11, sc.nr_reclaimed = 5048 [ 62.638782] pass = 4, prio = 10, sc.nr_reclaimed = 192 [ 62.740052] pass = 4, prio = 9, sc.nr_reclaimed = 0 [ 62.843385] pass = 4, prio = 8, sc.nr_reclaimed = 640 [ 62.946726] pass = 4, prio = 7, sc.nr_reclaimed = 640 [ 63.046711] pass = 4, prio = 6, sc.nr_reclaimed = 640 [ 63.146717] pass = 4, prio = 5, sc.nr_reclaimed = 608 [ 63.246712] pass = 4, prio = 4, sc.nr_reclaimed = 600 [ 63.346704] pass = 4, prio = 3, sc.nr_reclaimed = 128 [ 63.446698] pass = 4, prio = 2, sc.nr_reclaimed = 0 [ 63.546705] pass = 4, prio = 1, sc.nr_reclaimed = 0 [ 63.646698] pass = 4, prio = 0, sc.nr_reclaimed = 0 [ 63.646708] after: sc.nr_reclaimed = 0 [ 63.646715] shrink_all_memory(10000) failed
Quoted 4 lines
which obviously is done by
shrink_all_zones(). Sigh.The appended patch should help, please verify.
Yes, that fixes it.
Thanks
Alan
PATCH 1/1 PM/Hibernate: Fix memory shrinking (Re: [Bug #13058] First hibernation attempt fails)
Quoted 107 lines · Alan Jenkins
Quoted 106 lines · Rafael J. Wysocki
Quoted 20 lines · Alan Jenkins
Quoted 9 lines · Linus Torvalds
Quoted 4 lines · Rafael J. Wysocki
Can you please try to reproduce the problem with the appended debug patch applied and send the output of dmesg to me?
Maybe something like this instead (or in addition to).
Quoted 9 lines
It does "
show_mem()" when memory shrinking fails. It will show a _lot_ of data.Untested, but trivial.
Linus
---Quoted 9 lines
Ok, I applied both your and Rafael's debug patches. dmesg attached.
After the failed hibernation, I noticed my touchpad wasn't working. But I think that's something else. I had another go and couldn't reproduce that. It's happened to me once before while testing 2.6.30-; I've also had the keyboard stop working at least once. I'm hoping it's the same bug as "20 ACPI interrupts per second on EEEPC" bug. It could be overloading my bug-ridden EC, which also acts as the keyboard controller.
Thanks for testing!
Clearly, sc.nr_reclaimed is reset in each iteration of the loop in
shrink_all_memory():[ 61.135207] PM: Shrinking memory... <6>before: sc.nr_reclaimed = 0 [ 61.180993] pass = 0, prio = 12, sc.nr_reclaimed = 0 [ 61.181004] pass = 0, prio = 11, sc.nr_reclaimed = 0 [ 61.181014] pass = 0, prio = 10, sc.nr_reclaimed = 0 [ 61.181024] pass = 0, prio = 9, sc.nr_reclaimed = 0 [ 61.181033] pass = 0, prio = 8, sc.nr_reclaimed = 0 [ 61.181043] pass = 0, prio = 7, sc.nr_reclaimed = 0 [ 61.186509] pass = 0, prio = 6, sc.nr_reclaimed = 0 [ 61.186525] pass = 0, prio = 5, sc.nr_reclaimed = 0 [ 61.186534] pass = 0, prio = 4, sc.nr_reclaimed = 0 [ 61.186544] pass = 0, prio = 3, sc.nr_reclaimed = 0 [ 61.333383] pass = 0, prio = 2, sc.nr_reclaimed = 7746 [ 61.436711] pass = 0, prio = 1, sc.nr_reclaimed = 1957 [ 61.556712] pass = 0, prio = 0, sc.nr_reclaimed = 4528 [ 61.556729] pass = 1, prio = 12, sc.nr_reclaimed = 0 [ 61.556739] pass = 1, prio = 11, sc.nr_reclaimed = 0 [ 61.556749] pass = 1, prio = 10, sc.nr_reclaimed = 0 [ 61.556759] pass = 1, prio = 9, sc.nr_reclaimed = 0 [ 61.556768] pass = 1, prio = 8, sc.nr_reclaimed = 0 [ 61.556778] pass = 1, prio = 7, sc.nr_reclaimed = 0 [ 61.556787] pass = 1, prio = 6, sc.nr_reclaimed = 0 [ 61.556797] pass = 1, prio = 5, sc.nr_reclaimed = 0 [ 61.556806] pass = 1, prio = 4, sc.nr_reclaimed = 0 [ 61.556816] pass = 1, prio = 3, sc.nr_reclaimed = 0 [ 61.556825] pass = 1, prio = 2, sc.nr_reclaimed = 0 [ 61.556835] pass = 1, prio = 1, sc.nr_reclaimed = 0 [ 61.595841] pass = 1, prio = 0, sc.nr_reclaimed = 0 [ 61.595854] pass = 2, prio = 12, sc.nr_reclaimed = 0 [ 61.595864] pass = 2, prio = 11, sc.nr_reclaimed = 0 [ 61.595873] pass = 2, prio = 10, sc.nr_reclaimed = 0 [ 61.595883] pass = 2, prio = 9, sc.nr_reclaimed = 0 [ 61.710044] pass = 2, prio = 8, sc.nr_reclaimed = 2895 [ 61.710062] pass = 2, prio = 7, sc.nr_reclaimed = 0 [ 61.710072] pass = 2, prio = 6, sc.nr_reclaimed = 0 [ 61.710081] pass = 2, prio = 5, sc.nr_reclaimed = 0 [ 61.710091] pass = 2, prio = 4, sc.nr_reclaimed = 0 [ 61.710100] pass = 2, prio = 3, sc.nr_reclaimed = 0 [ 61.710110] pass = 2, prio = 2, sc.nr_reclaimed = 0 [ 61.710119] pass = 2, prio = 1, sc.nr_reclaimed = 0 [ 61.823378] pass = 2, prio = 0, sc.nr_reclaimed = 1802 [ 61.823396] pass = 3, prio = 12, sc.nr_reclaimed = 0 [ 61.823406] pass = 3, prio = 11, sc.nr_reclaimed = 0 [ 61.823416] pass = 3, prio = 10, sc.nr_reclaimed = 0 [ 61.823425] pass = 3, prio = 9, sc.nr_reclaimed = 0 [ 61.823435] pass = 3, prio = 8, sc.nr_reclaimed = 0 [ 61.823444] pass = 3, prio = 7, sc.nr_reclaimed = 0 [ 61.823454] pass = 3, prio = 6, sc.nr_reclaimed = 0 [ 61.823464] pass = 3, prio = 5, sc.nr_reclaimed = 0 [ 61.823473] pass = 3, prio = 4, sc.nr_reclaimed = 0 [ 61.823483] pass = 3, prio = 3, sc.nr_reclaimed = 0 [ 61.823492] pass = 3, prio = 2, sc.nr_reclaimed = 0 [ 61.823502] pass = 3, prio = 1, sc.nr_reclaimed = 0 [ 62.586707] pass = 3, prio = 0, sc.nr_reclaimed = 2716 [ 62.608037] pass = 4, prio = 12, sc.nr_reclaimed = 3070 [ 62.634644] pass = 4, prio = 11, sc.nr_reclaimed = 5048 [ 62.638782] pass = 4, prio = 10, sc.nr_reclaimed = 192 [ 62.740052] pass = 4, prio = 9, sc.nr_reclaimed = 0 [ 62.843385] pass = 4, prio = 8, sc.nr_reclaimed = 640 [ 62.946726] pass = 4, prio = 7, sc.nr_reclaimed = 640 [ 63.046711] pass = 4, prio = 6, sc.nr_reclaimed = 640 [ 63.146717] pass = 4, prio = 5, sc.nr_reclaimed = 608 [ 63.246712] pass = 4, prio = 4, sc.nr_reclaimed = 600 [ 63.346704] pass = 4, prio = 3, sc.nr_reclaimed = 128 [ 63.446698] pass = 4, prio = 2, sc.nr_reclaimed = 0 [ 63.546705] pass = 4, prio = 1, sc.nr_reclaimed = 0 [ 63.646698] pass = 4, prio = 0, sc.nr_reclaimed = 0 [ 63.646708] after: sc.nr_reclaimed = 0 [ 63.646715] shrink_all_memory(10000) failed
Quoted 6 lines
Quoted 4 lines
which obviously is done by
shrink_all_zones(). Sigh.The appended patch should help, please verify.
Yes, that fixes it.
---
From: Rafael J. Wysocki <[email protected]>
Subject: PM/Hibernate: Fix memory shrinking
Commit d979677c4c02f0a72db5a03ecd8184bd9d6695c8
(mm: shrink_all_memory(): use sc.nr_reclaimed) broke the memory shrinking used by hibernation, becuse it did not update shrink_all_zones() in accordance with the other changes it made. Fix this by making shrink_all_zones() update sc->nr_reclaimed instead of overwriting its value.
--- mm/vmscan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
mm/vmscan.c +3 -2
@@ -2088,13 +2088,13 @@ static void shrink_all_zones(unsigned lo nr_reclaimed +=shrink_list (l, nr_to_scan, zone, sc, prio);if (nr_reclaimed >= nr_pages) { - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed;return ; } } } } - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed; }/*
@@ -2115,6 +2115,7 @@ unsigned long shrink_all_memory(unsigned .may_unmap = 0, .may_writepage = 1, .isolate_pages = isolate_pages_global, + .nr_reclaimed = 0, }; current->reclaim_state = &reclaim_state;
[Bug #13031] Deadlock/hang in SATA probe
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13031
Subject : Deadlock/hang in SATA probe
Submitter : Petr Vandrovec <[email protected]>
Date : 2009-04-06 23:33 (11 days old)
[Bug #13044] 2.6.30-rc1 can't find the root fs
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13044
Subject : 2.6.30-rc1 can't find the root fs
Submitter : Heinz Diehl <htd-HjJ2MNWy62to6+H+lsi3Gti2O/[email protected]>
Date : 2009-04-08 13:35 (9 days old)
[Bug #13048] /sys/class/backlight/acpi_video0/* is gone on vaio laptop with Intel GM45.
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject : /sys/class/backlight/acpi_video0/* is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)
Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
[Bug #13068] Lockdep warining in inotify_dev_queue_event
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13068
Subject : Lockdep warining in inotify_dev_queue_event
Submitter : Sachin Sant <[email protected]>
Date : 2009-04-05 12:37 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123893439229272&w=4
Re: [Bug #13068] Lockdep warining in inotify_dev_queue_event
Quoted 6 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13068
Subject : Lockdep warining ininotify_dev_queue_event
Submitter : Sachin Sant <[email protected]>
Date : 2009-04-05 12:37 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123893439229272&w=4
I can recreate this with latest kernel. Easiest way is to use the LTP mm tests (runltp -f mm )
=================================
[ INFO: inconsistent lock state ]
2.6.30-rc2-git4 #4
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/334 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&inode->inotify_mutex){+.+.?.}, at: [<c000000000166cc0>] .inotify_inode_is_dead+0x38/0xc8 {RECLAIM_FS-ON-W} state was registered at:
[<c000000000098d74>] .lockdep_trace_alloc+0xc4/0xf4 [<c000000000122128>] .__kmalloc+0x100/0x274 [<c0000000001682fc>] .kernel_event+0xb8/0x154 [<c0000000001684b8>] .inotify_dev_queue_event+0x120/0x1cc [<c000000000166b2c>] .inotify_inode_queue_event+0xf0/0x160 [<c000000000139c08>] .vfs_create+0x170/0x1dc [<c00000000013d5c0>] .do_filp_open+0x25c/0x964 [<c00000000012b414>] .do_sys_open+0x80/0x140 [<c00000000012b2f0>] .SyS_creat+0x18/0x2c [<c000000000008554>] syscall_exit+0x0/0x40 irq event stamp: 75815 hardirqs last enabled at (75815): [<c0000000000cb824>] .__call_rcu+0x128/0x15c hardirqs last disabled at (75814): [<c0000000000cb748>] .__call_rcu+0x4c/0x15c softirqs last enabled at (73084): [<c00000000002be8c>] .call_do_softirq+0x14/0x24 softirqs last disabled at (73071): [<c00000000002be8c>] .call_do_softirq+0x14/0x24
other info that might help us debug this:
2 locks held by kswapd0/334:
#0: (shrinker_rwsem){++++..}, at: [<c0000000000f57c8>] .shrink_slab+0x5c/0x228 #1: (&type->s_umount_key#15){++++..}, at: [<c000000000142f00>] .shrink_dcache_memory+0xfc/0x244
stack backtrace: Call Trace: [c00000004473b440] [c000000000011a54] .show_stack+0x6c/0x16c (unreliable) [c00000004473b4f0] [c0000000000984d8] .print_usage_bug+0x1c0/0x1f4 [c00000004473b5b0] [c00000000009888c] .mark_lock+0x380/0x6e4 [c00000004473b660] [c00000000009a99c] .__lock_acquire+0x7a8/0x17b4 [c00000004473b760] [c00000000009bab0] .lock_acquire+0x108/0x154 [c00000004473b820] [c0000000005a8bac] .mutex_lock_nested+0x88/0x460 [c00000004473b920] [c000000000166cc0] .inotify_inode_is_dead+0x38/0xc8 [c00000004473b9d0] [c0000000001427f4] .dentry_iput+0xa0/0x128 [c00000004473ba60] [c0000000001429f0] .d_kill+0x5c/0xa0 [c00000004473baf0] [c000000000142d38] .__shrink_dcache_sb+0x304/0x3d0 [c00000004473bbd0] [c000000000142f48] .shrink_dcache_memory+0x144/0x244 [c00000004473bcb0] [c0000000000f58c8] .shrink_slab+0x15c/0x228 [c00000004473bd70] [c0000000000f61a4] .kswapd+0x4c0/0x678 [c00000004473bf00] [c000000000088ba4] .kthread+0x80/0xcc [c00000004473bf90] [c00000000002c194] .kernel_thread+0x54/0x70
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Re: [Bug #13068] Lockdep warining in inotify_dev_queue_event
Quoted 55 lines · Sachin Sant
Quoted 6 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13068
Subject : Lockdep warining ininotify_dev_queue_event
Submitter : Sachin Sant <[email protected]>
Date : 2009-04-05 12:37 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123893439229272&w=4I can recreate this with latest kernel. Easiest way is to use the LTP mm tests (runltp -f mm )
=================================
[ INFO: inconsistent lock state ]
2.6.30-rc2-git4 #4
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/334 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&inode->inotify_mutex){+.+.?.}, at: [<c000000000166cc0>]
.inotify_inode_is_dead+0x38/0xc8 {RECLAIM_FS-ON-W} state was registered at:[<c000000000098d74>] .lockdep_trace_alloc+0xc4/0xf4 [<c000000000122128>] .__kmalloc+0x100/0x274 [<c0000000001682fc>] .kernel_event+0xb8/0x154 [<c0000000001684b8>] .inotify_dev_queue_event+0x120/0x1cc [<c000000000166b2c>] .inotify_inode_queue_event+0xf0/0x160 [<c000000000139c08>] .vfs_create+0x170/0x1dc [<c00000000013d5c0>] .do_filp_open+0x25c/0x964 [<c00000000012b414>] .do_sys_open+0x80/0x140 [<c00000000012b2f0>] .SyS_creat+0x18/0x2c [<c000000000008554>] syscall_exit+0x0/0x40 irq event stamp: 75815 hardirqs last enabled at (75815): [<c0000000000cb824>] .__call_rcu+0x128/0x15c hardirqs last disabled at (75814): [<c0000000000cb748>] .__call_rcu+0x4c/0x15c softirqs last enabled at (73084): [<c00000000002be8c>] .call_do_softirq+0x14/0x24 softirqs last disabled at (73071): [<c00000000002be8c>] .call_do_softirq+0x14/0x24other info that might help us debug this:
2 locks held by kswapd0/334:
#0: (shrinker_rwsem){++++..}, at: [<c0000000000f57c8>].shrink_slab+0x5c/0x228 #1: (&type->s_umount_key#15){++++..}, at: [<c000000000142f00>] .shrink_dcache_memory+0xfc/0x244 stack backtrace: Call Trace: [c00000004473b440] [c000000000011a54] .show_stack+0x6c/0x16c (unreliable) [c00000004473b4f0] [c0000000000984d8] .print_usage_bug+0x1c0/0x1f4 [c00000004473b5b0] [c00000000009888c] .mark_lock+0x380/0x6e4 [c00000004473b660] [c00000000009a99c] .__lock_acquire+0x7a8/0x17b4 [c00000004473b760] [c00000000009bab0] .lock_acquire+0x108/0x154 [c00000004473b820] [c0000000005a8bac] .mutex_lock_nested+0x88/0x460 [c00000004473b920] [c000000000166cc0] .inotify_inode_is_dead+0x38/0xc8
Quoted 8 lines
[c00000004473b9d0] [c0000000001427f4] .dentry_iput+0xa0/0x128 [c00000004473ba60] [c0000000001429f0] .d_kill+0x5c/0xa0 [c00000004473baf0] [c000000000142d38] .__shrink_dcache_sb+0x304/0x3d0 [c00000004473bbd0] [c000000000142f48] .shrink_dcache_memory+0x144/0x244 [c00000004473bcb0] [c0000000000f58c8] .shrink_slab+0x15c/0x228 [c00000004473bd70] [c0000000000f61a4] .kswapd+0x4c0/0x678 [c00000004473bf00] [c000000000088ba4] .kthread+0x80/0xcc [c00000004473bf90] [c00000000002c194] .kernel_thread+0x54/0x70
Thanks for the update.
Rafael
Re: [Bug #13068] Lockdep warning in inotify_dev_queue_event
In reply to Rafael J. WysockiQuoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13068
Subject : Lockdep warining ininotify_dev_queue_event
Submitter : Sachin Sant <[email protected]>
Date : 2009-04-05 12:37 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123893439229272&w=4
I can recreate this with 2.6.30-rc3 as well.
=================================
[ INFO: inconsistent lock state ]
2.6.30-rc3 #1
---------------------------------
inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
inotify02/31550 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&inode->inotify_mutex){+.+.?.}, at: [<c0000000001668ec>] .inotify_inode_queue_event+0x6c/0x160 {IN-RECLAIM_FS-W} state was registered at:
[<c00000000009bb1c>] .lock_acquire+0x108/0x154 [<c0000000005a8be4>] .mutex_lock_nested+0x88/0x460 [<c000000000166b04>] .inotify_inode_is_dead+0x38/0xc8 [<c000000000142708>] .dentry_iput+0xa0/0x128 [<c000000000142904>] .d_kill+0x5c/0xa0 [<c000000000142c4c>] .__shrink_dcache_sb+0x304/0x3d0 [<c000000000142e5c>] .shrink_dcache_memory+0x144/0x244 [<c0000000000f580c>] .shrink_slab+0x15c/0x228 [<c0000000000f60f8>] .kswapd+0x4c4/0x67c [<c000000000088ba4>] .kthread+0x80/0xcc [<c00000000002c194>] .kernel_thread+0x54/0x70 irq event stamp: 2267 hardirqs last enabled at (2267): [<c000000000120490>] .kmem_cache_alloc+0xec/0x1b4 hardirqs last disabled at (2266): [<c000000000120418>] .kmem_cache_alloc+0x74/0x1b4 softirqs last enabled at (1654): [<c00000000002be8c>] .call_do_softirq+0x14/0x24 softirqs last disabled at (1639): [<c00000000002be8c>] .call_do_softirq+0x14/0x24
other info that might help us debug this:
4 locks held by inotify02/31550:
#0: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c00000000013d41c>] .do_filp_open+0x1a4/0x964
#1: (&inode->inotify_mutex){+.+.?.}, at: [<c0000000001668ec>] .inotify_inode_queue_event+0x6c/0x160
#2: (&ih->mutex){+.+...}, at: [<c000000000166920>] .inotify_inode_queue_event+0xa0/0x160
#3: (&dev->ev_mutex){+.+...}, at: [<c00000000016822c>] .inotify_dev_queue_event+0x50/0x1ccstack backtrace: Call Trace: [c00000001816b4b0] [c000000000011a54] .show_stack+0x6c/0x16c (unreliable) [c00000001816b560] [c000000000098544] .print_usage_bug+0x1c0/0x1f4 [c00000001816b620] [c0000000000988f8] .mark_lock+0x380/0x6e4 [c00000001816b6d0] [c000000000098cd0] .mark_held_locks+0x74/0xc0 [c00000001816b770] [c000000000098de0] .lockdep_trace_alloc+0xc4/0xf4 [c00000001816b7f0] [c000000000122090] .__kmalloc+0x100/0x274 [c00000001816b8a0] [c000000000168140] .kernel_event+0xb8/0x154 [c00000001816b940] [c0000000001682fc] .inotify_dev_queue_event+0x120/0x1cc [c00000001816b9f0] [c000000000166970] .inotify_inode_queue_event+0xf0/0x160 [c00000001816bac0] [c000000000139acc] .vfs_create+0x170/0x1dc [c00000001816bb60] [c00000000013d4d4] .do_filp_open+0x25c/0x964 [c00000001816bd10] [c00000000012b37c] .do_sys_open+0x80/0x140 [c00000001816bdc0] [c00000000012b258] .SyS_creat+0x18/0x2c [c00000001816be30] [c000000000008554] syscall_exit+0x0/0x40
Let me know if i could provide any other information.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
[Bug #13066] Intel HD Audio oops
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13066
Subject : Intel HD Audio oops
Submitter : Jeff Chua <[email protected]>
Date : 2009-04-01 8:28 (16 days old)
References : http://marc.info/?l=linux-kernel&m=123857454625829&w=4
Re: [Bug #13066] Intel HD Audio oops
At Thu, 16 Apr 2009 23:45:01 +0200 (CEST),
Quoted 9 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13066
Subject : Intel HD Audio oops
Submitter : Jeff Chua <[email protected]>
Date : 2009-04-01 8:28 (16 days old)
References : http://marc.info/?l=linux-kernel&m=123857454625829&w=4
The fix patch was merged to the upstream as commit 95c0909961bc5ff18c78b2ab0d093cddc0a8b0b5.
thanks,
Takashi
Re: [Bug #13066] Intel HD Audio oops
Quoted 11 lines · Takashi Iwai
At Thu, 16 Apr 2009 23:45:01 +0200 (CEST),
Quoted 9 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13066
Subject : Intel HD Audio oops
Submitter : Jeff Chua <[email protected]>
Date : 2009-04-01 8:28 (16 days old)
References : http://marc.info/?l=linux-kernel&m=123857454625829&w=4The fix patch was merged to the upstream as commit
95c0909961bc5ff18c78b2ab0d093cddc0a8b0b5.
Closed.
Thanks,
Rafael
[Bug #13069] regression in 2.6.29-git3 on SH/Dreamcast
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject : regression in 2.6.29-git3 on SH/Dreamcast
Submitter : Adrian McMenamin <[email protected]>
Date : 2009-03-29 19:04 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123835353115372&w=4
Re: [Bug #13069] regression in 2.6.29-git3 on SH/Dreamcast
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject : regression in 2.6.29-git3 on SH/Dreamcast
Submitter : Adrian McMenamin <[email protected]>
Date : 2009-03-29 19:04 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123835353115372&w=4
At this point it *looks* as though it was simply a question of insufficient memory to boot, but I think it needs further testing. Nobody else seems to have picked it up though.
Re: [Bug #13069] regression in 2.6.29-git3 on SH/Dreamcast
Quoted 13 lines · Rafael J. Wysocki
Quoted 13 lines
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject : regression in 2.6.29-git3 on SH/Dreamcast
Submitter : Adrian McMenamin <adrian-TSF8l6Tg6afpT6hvJLqO3fkIJyZcjF/[email protected]> Date : 2009-03-29 19:04 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123835353115372&w=4
Quoted 3 lines · Adrian McMenamin
At this point it *looks* as though it was simply a question of insufficient memory to boot, but I think it needs further testing. Nobody else seems to have picked it up though.
Yeah, it looks like there's not enough memory to boot. It could well be that the kernel memory footprint got bigger but I don't think the bisected commit is at fault here. Perhaps we should just close the bug?
Re: [Bug #13069] regression in 2.6.29-git3 on SH/Dreamcast
Quoted 17 lines · Pekka Enberg
Quoted 8 lines · Rafael J. Wysocki
Quoted 8 lines
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject : regression in 2.6.29-git3 on SH/Dreamcast
Submitter : Adrian McMenamin <[email protected]>
Date : 2009-03-29 19:04 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123835353115372&w=4On Fri, Apr 24, 2009 at 8:37 PM, Adrian McMenamin <[email protected]> wrote:
Quoted 8 lines
Quoted 3 lines
At this point it *looks* as though it was simply a question of insufficient memory to boot, but I think it needs further testing. Nobody else seems to have picked it up though.
Yeah, it looks like there's not enough memory to boot. It could well be that the kernel memory footprint got bigger but I don't think the bisected commit is at fault here. Perhaps we should just close the bug?
Done.
Thanks,
Rafael
Re: [Bug #13069] regression in 2.6.29-git3 on SH/Dreamcast
In reply to Pekka EnbergQuoted 17 lines · Pekka Enberg
Quoted 8 lines · Rafael J. Wysocki
Quoted 8 lines
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject : regression in 2.6.29-git3 on SH/Dreamcast
Submitter : Adrian McMenamin <[email protected]>
Date : 2009-03-29 19:04 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123835353115372&w=4On Fri, Apr 24, 2009 at 8:37 PM, Adrian McMenamin
<[email protected]> wrote:
Quoted 8 lines
Quoted 3 lines
At this point it *looks* as though it was simply a question of insufficient memory to boot, but I think it needs further testing. Nobody else seems to have picked it up though.
Yeah, it looks like there's not enough memory to boot. It could well be that the kernel memory footprint got bigger but I don't think the bisected commit is at fault here. Perhaps we should just close the bug?
I think that is probably the best course of action for now, yes.
[Bug #13067] iwl3945: wlan0: beacon loss from AP - sending probe request
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4
Re: [Bug #13067] iwl3945: wlan0: beacon loss from AP - sending probe request
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4
I'm getting this on .30rc2, so I confirm that it's still an issue (I'm not the original submitter). It's really annoying because it's filling my logs like crazy. Below is 15mins of logs, and it just repeats like this.
dhclient: DHCPREQUEST of 192.168.1.5 on wlan0 to 192.168.1.254 port 67
dhclient: DHCPACK of 192.168.1.5 from 192.168.1.254
dhclient: bound to 192.168.1.5 -- renewal in 823 seconds.
NetworkManager: <debug> [1239937333.003788] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937339.001004] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937453.002911] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937459.000974] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937573.002956] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937579.000971] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937693.003787] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937699.000981] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937813.002710] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937819.000753] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937933.003806] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937939.000724] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239938053.002711] periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239938059.001749] periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
dhclient: DHCPREQUEST of 192.168.1.5 on wlan0 to 192.168.1.254 port 67
dhclient: DHCPACK of 192.168.1.5 from 192.168.1.254
dhclient: bound to 192.168.1.5 -- renewal in 803 seconds.
Justin Madru
Re: [Bug #13067] iwl3945: wlan0: beacon loss from AP - sending probe request
Quoted 55 lines · Justin Madru
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4I'm getting this on .30rc2, so I confirm that it's still an issue (I'm not the original submitter).
It's really annoying because it's filling my logs like crazy. Below is 15mins of logs, and it just repeats like this.dhclient: DHCPREQUEST of 192.168.1.5 on wlan0 to 192.168.1.254 port 67
dhclient: DHCPACK of 192.168.1.5 from 192.168.1.254
dhclient: bound to 192.168.1.5 -- renewal in 823 seconds.
NetworkManager: <debug> [1239937333.003788]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937339.001004]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937453.002911]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937459.000974]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937573.002956]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937579.000971]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937693.003787]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937699.000981]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937813.002710]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937819.000753]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
NetworkManager: <debug> [1239937933.003806]periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239937939.000724]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
Quoted 8 lines
NetworkManager: <debug> [1239938053.002711]
periodic_update(): Roamed from BSSID 00:1C:DF:67:1F:AC (madru) to (none) ((none))
kernel: wlan0: beacon loss from AP 00:1c:df:67:1f:ac - sending probe request
NetworkManager: <debug> [1239938059.001749]periodic_update(): Roamed from BSSID (none) ((none)) to 00:1C:DF:67:1F:AC (madru)
dhclient: DHCPREQUEST of 192.168.1.5 on wlan0 to 192.168.1.254 port 67
dhclient: DHCPACK of 192.168.1.5 from 192.168.1.254
dhclient: bound to 192.168.1.5 -- renewal in 803 seconds.
Thanks for the update.
Rafael
[Bug #13096] 2.6.30-rc2 hangs in get_measured_perf on tigerton
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13096
Subject : 2.6.30-rc2 hangs in get_measured_perf on tigerton
Submitter : Zhang, Yanmin <yanmin_zhang-VuQAYsv1563Yd54FQh9/[email protected]>
Date : 2009-04-15 14:01 (2 days old)
References : http://lkml.org/lkml/2009/4/15/34
[Bug #13097] Kernel will freeze network after using a tun/tap device
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13097
Subject : Kernel will freeze network after using a tun/tap device
Submitter : Dâniel Fraga <[email protected]>
Date : 2009-04-15 22:19 (2 days old)
David Miller
maintainerRe: [Bug #13097] Kernel will freeze network after using a tun/tap device
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:45:02 +0200 (CEST)
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13097
Subject : Kernel will freeze network after using a tun/tap device
Submitter : Dâniel Fraga <[email protected]>
Date : 2009-04-15 22:19 (2 days old)
Herbert what's the state of this? Is this fixed already as of what I pushed earlier today to Linus, or are the two patches you are working on cure this?
Thanks.
Re: [Bug #13097] Kernel will freeze network after using a tun/tap device
Quoted 11 lines · David Miller
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:45:02 +0200 (CEST)Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13097
Subject : Kernel will freeze network after using a tun/tap device
Submitter : Dâniel Fraga <[email protected]>
Date : 2009-04-15 22:19 (2 days old)Herbert what's the state of this? Is this fixed already as of what I pushed earlier today to Linus, or are the two patches you are working on cure this?
This bug sounds nothing like the one I've been trying to fix.
I'll take a look at it.
Cheers,
Signature · 4 lines
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt[Bug #13095] thinkpad-acpi: cannot control brightness with hotkeys
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160
[Bug #13087] boot hang due to commit ff69f2bba67bd45514923aaedbf40fe351787c59
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13087
Subject : boot hang due to commit ff69f2bba67bd45514923aaedbf40fe351787c59
Submitter : Bruno <[email protected]>
Date : 2009-04-14 17:51 (3 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ff69f2bba67bd45514923aaedbf40fe351787c59
[Bug #13098] 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <andi-Vw/[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200
Re: [Bug #13098] 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200Handled-By H. Peter Anvin <[email protected]>
That's already fixed with 5f641356127712fbdce0eee120e5ce115860c17f I think. At least it works again on my test box with the rcs.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
[Bug #13099] net, sky2: BUG: unable to handle kernel NULL pointer dereference, pci_vpd_truncate()
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference, pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4
Re: [Bug #13099] net, sky2: BUG: unable to handle kernel NULL pointer dereference, pci_vpd_truncate()
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>
I think this can be closed as the fix has been merged upstream already (via the PCI tree):
commit d407e32efe060afa2b9a797a91376ebc65b4ce11
Author: Anton Vorontsov <[email protected]>
Date: Wed Apr 1 02:23:41 2009 +0400
PCI: Fix oops in pci_vpd_truncate
Ingo
Re: [Bug #13099] net, sky2: BUG: unable to handle kernel NULL pointer dereference, pci_vpd_truncate()
Quoted 18 lines · Ingo Molnar
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>
Quoted 8 lines
I think this can be closed as the fix has been merged upstream already (via the PCI tree):
commit
d407e32efe060afa2b9a797a91376ebc65b4ce11
Author: Anton Vorontsov <[email protected]>
Date: Wed Apr 1 02:23:41 2009 +0400PCI: Fix oops in
pci_vpd_truncate
Thanks, closed.
Rafael
[Bug #13101] BUG: scheduling while atomic: swapper/0/0x10000100
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13101
Subject : BUG: scheduling while atomic: swapper/0/0x10000100
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-07 7:37 (10 days old)
References : http://marc.info/?l=linux-kernel&m=123908995822195&w=4
[Bug #13106] 2.6.30-rc1: intel 3945 no wireless
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13106
Subject : 2.6.30-rc1: intel 3945 no wireless
Submitter : 2.6.30-rc1: intel 3945 no wireless
Date : 2009-04-08 5:36 (9 days old)
References : http://marc.info/?l=linux-kernel&m=123916905605534&w=4
Re: [Bug #13106] 2.6.30-rc1: intel 3945 no wireless
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13106
Subject : 2.6.30-rc1: intel 3945 no wireless
Submitter : 2.6.30-rc1: intel 3945 no wireless
Date : 2009-04-08 5:36 (9 days old)
References : http://marc.info/?l=linux-kernel&m=123916905605534&w=4
That regression was fixed by Herbert Xu's commit 97c18e2c. It should no longer be listed.
Larry
Re: [Bug #13106] 2.6.30-rc1: intel 3945 no wireless
Quoted 20 lines · Larry Finger
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13106
Subject : 2.6.30-rc1: intel 3945 no wireless
Submitter : 2.6.30-rc1: intel 3945 no wireless
Date : 2009-04-08 5:36 (9 days old)
References : http://marc.info/?l=linux-kernel&m=123916905605534&w=4That regression was fixed by Herbert Xu's commit
97c18e2c. It should no longer be listed.
Quoted 8 lines
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I'm the original submitter. I confirm that it's been fixed -- close bug.
Justin Madru
Re: [Bug #13106] 2.6.30-rc1: intel 3945 no wireless
Quoted 29 lines · Justin Madru
Quoted 20 lines · Larry Finger
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13106
Subject : 2.6.30-rc1: intel 3945 no wireless
Submitter : 2.6.30-rc1: intel 3945 no wireless
Date : 2009-04-08 5:36 (9 days old)
References : http://marc.info/?l=linux-kernel&m=123916905605534&w=4That regression was fixed by Herbert Xu's commit
97c18e2c. It should no longer be listed.Quoted 8 lines
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line
I'm the original submitter. I confirm that it's been fixed -- close bug.
Thanks for the confirmation, the bug has been closed already.
Rafael
[Bug #13109] High latency on /sys/class/thermal
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject : High latency on /sys/class/thermal
Submitter : Tiago Simões Batista <[email protected]>
Date : 2009-04-11 14:56 (6 days old)
References : http://marc.info/?l=linux-kernel&m=123946182301248&w=4
[Bug #13107] LTP 20080131 causes defunct processes w/2.6.30-rc1
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13107
Subject : LTP 20080131 causes defunct processes w/2.6.30-rc1
Submitter : Kumar Gala <[email protected]>
Date : 2009-04-09 15:43 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3bfa0cba867f23365b81658b47efd906830879b
References : http://marc.info/?l=linux-kernel&m=123929187208953&w=4
Re: [Bug #13107] LTP 20080131 causes defunct processes w/2.6.30-rc1
Rafael J. Wysocki [[email protected]] wrote:
| This message has been generated automatically as a part of a report | of recent regressions. | | The following bug entry is on the current list of known regressions | from 2.6.29. Please verify if it still should be listed and let me know | (either way). | | | Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13107 | Subject : LTP 20080131 causes defunct processes w/2.6.30-rc1 | Submitter : Kumar Gala <[email protected]> | Date : 2009-04-09 15:43 (8 days old) | First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3bfa0cba867f23365b81658b47efd906830879b | References : http://marc.info/?l=linux-kernel&m=123929187208953&w=4 | Handled-By : Sukadev Bhattiprolu <[email protected]> |
The last response to this was: http://lkml.org/lkml/2009/4/10/193.
So it was not clear if the init was being ptraced or it got the SIGSTOP from parent namespace.
Kumar, any update on this ?
Sukadev
[Bug #13108] 2.6.30-rc1: white screen during boot (regression) on spitz
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13108
Subject : 2.6.30-rc1: white screen during boot (regression) on spitz
Submitter : Pavel Machek <[email protected]>
Date : 2009-04-10 10:34 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123935954223418&w=4
Re: [Bug #13108] 2.6.30-rc1: white screen during boot (regression) on spitz
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13108
Subject : 2.6.30-rc1: white screen during boot (regression) on spitz
Submitter : Pavel Machek <[email protected]>
Date : 2009-04-10 10:34 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123935954223418&w=4Handled-By Dmitry Eremin-Solenikov <[email protected]>
It was fixed in 2.6.30-rc3 as a test boot confirmed... (I have a link to patch fixing it, but I guess we can simply close this.) Thanks!
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [Bug #13108] 2.6.30-rc1: white screen during boot (regression) on spitz
Quoted 16 lines · Pavel Machek
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13108
Subject : 2.6.30-rc1: white screen during boot (regression) on spitz
Submitter : Pavel Machek <[email protected]>
Date : 2009-04-10 10:34 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123935954223418&w=4Handled-By Dmitry Eremin-Solenikov <[email protected]>
Quoted 2 lines
It was fixed in 2.6.30-rc3 as a test boot confirmed... (I have a link to patch fixing it, but I guess we can simply close this.) Thanks!
Thanks, closed.
Rafael
[Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13111
Subject : Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Submitter : Robin Holt <holt-sJ/[email protected]>
Date : 2009-04-08 7:12 (9 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e4f341103e4a2b35f56a0f89802f1b1448e8d04b
References : http://marc.info/?l=linux-kernel&m=123917477312823&w=4
David Miller
maintainerRe: [Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:45:05 +0200 (CEST)
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13111
Subject : Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Submitter : Robin Holt <holt-sJ/[email protected]>
Date : 2009-04-08 7:12 (9 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e4f341103e4a2b35f56a0f89802f1b1448e8d04b
References : http://marc.info/?l=linux-kernel&m=123917477312823&w=4
We're half-way to a fix for this, see the commit below.
But we're not completely finished, so keep this entry open.
commit 0d489ffb76de0fe804cf06a9d4d11fa7342d74b9
Author: James Bottomley <James.Bottomley-d9PhHud1JfjCXq6kfMZ53/[email protected]> Date: Mon Apr 13 14:31:51 2009 -0700
tg3: fix big endian MAC address collection failure
We noticed on parisc that our broadcoms all swapped MAC addresses going from 2.6.29 to 2.6.30-rc1:
Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59 Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e
The problem patch is:
commit 6d348f2c1e0bb1cf7a494b51fc921095ead3f6ae
Author: Matt Carlson <mcarlson-dY08KVG/lbpWk0Htik3J/[email protected]>
Date: Wed Feb 25 14:25:52 2009 +0000
tg3: Eliminate tg3_nvram_read_swab()
With the root cause being the use of memcpy to set the mac address:
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
This might work on little endian machines, but it can't on big endian ones. You have to use the original setting mechanism to be correct on all architectures.
The attached patch fixes parisc.
Re: [Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Quoted 11 lines · David Miller
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:45:05 +0200 (CEST)Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13111
Subject : Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Submitter : Robin Holt <holt-sJ/[email protected]>
Date : 2009-04-08 7:12 (9 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e4f341103e4a2b35f56a0f89802f1b1448e8d04b
References : http://marc.info/?l=linux-kernel&m=123917477312823&w=4
Quoted 3 lines
We're half-way to a fix for this, see the commit below.
But we're not completely finished, so keep this entry open.
Actually, I think we do have a fix for this. James and Robin both reported that the test patch I sent out worked for them. I'm preparing a patchset for submission now.
James, Robin, can you confirm that you performed your tests with David's patch reverted?
Quoted 34 lines
commit
0d489ffb76de0fe804cf06a9d4d11fa7342d74b9Author: James Bottomley <James.Bottomley-d9PhHud1JfjCXq6kfMZ53/[email protected]> Date: Mon Apr 13 14:31:51 2009 -0700tg3: fix big endian MAC address collection failure
We noticed on parisc that our broadcoms all swapped MAC addresses going from 2.6.29 to 2.6.30-rc1:
Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59 Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e
The problem patch is:
commit
6d348f2c1e0bb1cf7a494b51fc921095ead3f6ae
Author: Matt Carlson <mcarlson-dY08KVG/lbpWk0Htik3J/[email protected]>
Date: Wed Feb 25 14:25:52 2009 +0000tg3: Eliminate
tg3_nvram_read_swab()With the root cause being the use of memcpy to set the mac address:
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));This might work on little endian machines, but it can't on big endian ones. You have to use the original setting mechanism to be correct on all architectures.
The attached patch fixes parisc.
Re: [Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Quoted 6 lines
Actually, I think we do have a fix for this. James and Robin both reported that the test patch I sent out worked for them. I'm preparing a patchset for submission now.
James, Robin, can you confirm that you performed your tests with David's patch reverted?
My test was done with the 2.6.28-rc1 kernel plus your patch and no others.
Robin
David Miller
maintainerRe: [Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
From: Robin Holt <holt-sJ/[email protected]>
Date: Fri, 17 Apr 2009 07:21:21 -0500
Quoted 9 lines
Quoted 6 lines
Actually, I think we do have a fix for this. James and Robin both reported that the test patch I sent out worked for them. I'm preparing a patchset for submission now.
James, Robin, can you confirm that you performed your tests with David's patch reverted?
My test was done with the 2.6.28-rc1 kernel plus your patch and no others.
Can I get a final patch against Linus's current tree?
Thanks.
Re: [Bug #13111] Linux 2.6.30-rc1 tg3 endian issues with MAC addresses on BCM5701
Quoted 9 lines · David Miller
From: Robin Holt <holt-sJ/[email protected]>
Date: Fri, 17 Apr 2009 07:21:21 -0500Quoted 2 lines
Quoted 2 lines
Actually, I think we do have a fix for this. James and Robin both reported that the test patch I sent out worked for them.
I'm preparing
Quoted 2 lines
Quoted 2 lines
a patchset for submission now.
Quoted 9 lines
Quoted 1 line
Quoted 1 line
James, Robin, can you confirm that you performed your
tests with David's
Quoted 4 lines
Quoted 1 line
patch reverted?
My test was done with the 2.6.28-rc1 kernel plus your patch and no others.
Can I get a final patch against Linus's current tree?
Matt should be able to provide a patch tomorrow. We're still discussing this with Grant Grundler on the parisc list.
[Bug #13112] Oops in drain_array
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops in drain_array
Submitter : Bart <mmx-G/[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4
[Bug #13113] tiobench read 50% regression with 2.6.30-rc1
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13113
Subject : tiobench read 50% regression with 2.6.30-rc1
Submitter : Zhang, Yanmin <yanmin_zhang-VuQAYsv1563Yd54FQh9/[email protected]>
Date : 2009-04-09 8:29 (8 days old)
References : http://marc.info/?l=linux-kernel&m=123926576802992&w=4
Patch : http://marc.info/?l=linux-kernel&m=123971130800697&w=4
Re: [Bug #13113] tiobench read 50% regression with 2.6.30-rc1
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13113
Subject : tiobench read 50% regression with 2.6.30-rc1
Submitter : Zhang, Yanmin <yanmin_zhang-VuQAYsv1563Yd54FQh9/[email protected]>
Date : 2009-04-09 8:29 (8 days old)
References : http://marc.info/?l=linux-kernel&m=123926576802992&w=4Handled-By Jens Axboe <[email protected]>Patch : http://marc.info/?l=linux-kernel&m=123971130800697&w=4
It's fixed by d6ceb25e8d8bccf826848c2621a50d02c0a7f4ae, which is already merged.
Signature · 1 line
Jens Axboe
Re: [Bug #13113] tiobench read 50% regression with 2.6.30-rc1
Quoted 17 lines · Jens Axboe
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13113
Subject : tiobench read 50% regression with 2.6.30-rc1
Submitter : Zhang, Yanmin <yanmin_zhang-VuQAYsv1563Yd54FQh9/[email protected]>
Date : 2009-04-09 8:29 (8 days old)
References : http://marc.info/?l=linux-kernel&m=123926576802992&w=4Handled-By Jens Axboe <[email protected]>Patch : http://marc.info/?l=linux-kernel&m=123971130800697&w=4
Quoted 2 lines
It's fixed by
d6ceb25e8d8bccf826848c2621a50d02c0a7f4ae, which is already merged.
Thanks, closed.
Rafael
[Bug #13110] 2.6.30-rc1 problems with firmware loading
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13110
Subject : 2.6.30-rc1 problems with firmware loading
Submitter : Ben Castricum <mail0904-YLO5ZLKhJ/U/fZsR/[email protected]>
Date : 2009-04-12 6:20 (5 days old)
References : http://marc.info/?l=linux-kernel&m=123951774919978&w=4
[Bug #13116] Can't boot with nosmp
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject : Can't boot with nosmp
Submitter : Stephen Hemminger <[email protected]>
Date : 2009-04-15 4:18 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123976917817920&w=4
[Bug #13118] iptables very slow after commit 784544739a25c30637397ace5489eeb6e15d7d49
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13118
Subject : iptables very slow after commit 784544739a25c30637397ace5489eeb6e15d7d49
Submitter : Jeff Chua <[email protected]>
Date : 2009-04-10 16:05 (7 days old)
References : http://lkml.org/lkml/2009/4/10/111
[Bug #13115] microcode driver newly spews warnings
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13115
Subject : microcode driver newly spews warnings
Submitter : Jeff Garzik <[email protected]>
Date : 2009-04-13 18:23 (4 days old)
References : http://marc.info/?l=linux-kernel&m=123964711725007&w=4
Patch : http://marc.info/?l=linux-kernel&m=123980715900884&w=4
[Bug #13119] Trouble with make-install from a NFS mount
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject : Trouble with make-install from a NFS mount
Submitter : Gregory Haskins <[email protected]>
Date : 2009-04-14 21:32 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123974482327044&w=4
[Bug #13114] USB storage (usbstick) automount woes
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13114
Subject : USB storage (usbstick) automount woes
Submitter : Mike Galbraith <[email protected]>
Date : 2009-04-09 9:26 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e6e244b6cb1f70e7109381626293cd40a8334ed3
References : http://marc.info/?l=linux-kernel&m=123926928907568&w=4
Re: [Bug #13114] USB storage (usbstick) automount woes
Quoted 8 lines · Rafael J. Wysocki
This message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13114
Subject : USB storage (usbstick) automount woes
Submitter : Mike Galbraith <[email protected]>
Date : 2009-04-09 9:26 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e6e244b6cb1f70e7109381626293cd40a8334ed3
References : http://marc.info/?l=linux-kernel&m=123926928907568&w=4
The fix is in the pipe.
-Mike
[Bug #13124] ioatdma: DMA-API: device driver frees DMA memory with wrong function
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13124
Subject : ioatdma: DMA-API: device driver frees DMA memory with wrong function
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-04-09 12:36 (8 days old)
References : http://marc.info/?l=linux-kernel&m=123928064322503&w=4
[Bug #13121] commit 1a7c618a3f7bef1a20ae740df512eeba21397fa5 breaks ACPI video
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13121
Subject : commit 1a7c618a3f7bef1a20ae740df512eeba21397fa5 breaks ACPI video
Submitter : Maxim Levitsky <[email protected]>
Date : 2009-04-16 11:37 (1 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1a7c618a3f7bef1a20ae740df512eeba21397fa5
References : http://marc.info/?l=linux-kernel&m=123988189401913&w=4
[Bug #13122] reiserfs_delete_xattrs: Couldn't delete all xattrs (-13)
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13122
Subject : reiserfs_delete_xattrs: Couldn't delete all xattrs (-13)
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-04-16 19:23 (1 days old)
References : http://marc.info/?l=linux-kernel&m=123990989515105&w=4
[Bug #13123] 20 ACPI interrupts per second on EEEPC 4G
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13123
Subject : 20 ACPI interrupts per second on EEEPC 4G
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-12 15:54 (5 days old)
References : http://marc.info/?l=linux-kernel&m=123955169317870&w=4
Patch : http://marc.info/?l=linux-kernel&m=123973665713690&w=4
[Bug #13120] BUG: using rootfstype=ext4 causes oops
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13120
Subject : BUG: using rootfstype=ext4 causes oops
Submitter : Andrew Price <andy-QvJ1taJFSUQwEI6hhNFqhFpr/1R2p/[email protected]>
Date : 2009-04-15 20:59 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123982932807371&w=4
Patch : http://marc.info/?l=linux-kernel&m=123991090816794&w=4
Re: [Bug #13120] BUG: using rootfstype=ext4 causes oops
Quoted 5 lines · Rafael J. Wysocki
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13120
Subject : BUG: using rootfstype=ext4 causes oops
Submitter : Andrew Price <andy-QvJ1taJFSUQwEI6hhNFqhFpr/1R2p/[email protected]>
Date : 2009-04-15 20:59 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123982932807371&w=4Patch : http://marc.info/?l=linux-kernel&m=123991090816794&w=4
Fixed in commit f505d49ffd25ed062e76ffd17568d3937fcd338c "ide: fix barriers support" (which was merged in df89f1ba971b3df2b7e1bc46ca7ce867539186fa ).
--
Andrew Price
[Bug #13125] active uvcvideo breaks over suspend
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979009508840&w=4
[Bug #13126] BUG: MAX_LOCKDEP_ENTRIES too low! when mounting rootfs
In reply to Rafael J. WysockiThis message has been generated automatically as a part of a report of recent regressions.
The following bug entry is on the current list of known regressions from 2.6.29. Please verify if it still should be listed and let me know (either way).
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13126
Subject : BUG: MAX_LOCKDEP_ENTRIES too low! when mounting rootfs
Submitter : Alexander Beregalov <[email protected]>
Date : 2009-04-15 12:43 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979949820538&w=4
I think you put this in the wrong regression pile:
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops indrain_array
Submitter : Bart <[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4
Hmm. This one seems like it should be in the "since 2.6.28" camp, since if I read that one right, it happens with 2.6.29.1.
(I mean sure, it might be new since 2.6.29, but it sounds more likely that it's already in 2.6.29)
Linus
Quoted 10 lines · Linus Torvalds
I think you put this in the wrong regression pile:
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops indrain_array
Submitter : Bart <[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4
Quoted 5 lines
Hmm. This one seems like it should be in the "since 2.6.28" camp, since if I read that one right, it happens with 2.6.29.1.
(I mean sure, it might be new since 2.6.29, but it sounds more likely that it's already in 2.6.29)
I'd suspect it's possibly hardware related:
http://www.kerneloops.org/search.php?search=free_block&btnG=Function+Search
Look at the very similar call signatures - spanning almost all kernels back to v2.6.16. There's one spike at .27 - perhaps the same box trying up hard and crashing several times - or a popular distro kernel?
Or it's a really ancient bug going back to v2.6.16.
Ingo
Quoted 21 lines · Ingo Molnar
Quoted 10 lines · Linus Torvalds
I think you put this in the wrong regression pile:
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops indrain_array
Submitter : Bart <mmx-G/[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4Quoted 5 lines
Hmm. This one seems like it should be in the "since 2.6.28" camp, since if I read that one right, it happens with 2.6.29.1.
(I mean sure, it might be new since 2.6.29, but it sounds more likely that it's already in 2.6.29)
I'd suspect it's possibly hardware related:
Quoted 8 lines
http://www.kerneloops.org/search.php?search=free_block&btnG=Function+Search
Look at the very similar call signatures - spanning almost all kernels back to v2.6.16. There's one spike at .27 - perhaps the same box trying up hard and crashing several times - or a popular distro kernel?
Or it's a really ancient bug going back to v2.6.16.
I have moved this one onto the list of regressions from 2.6.28. When it is confirmed that the bug is older, I'll drop it from there.
Thanks,
Rafael
Quoted 21 lines · Ingo Molnar
Quoted 10 lines · Linus Torvalds
I think you put this in the wrong regression pile:
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops indrain_array
Submitter : Bart <[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4Quoted 5 lines
Hmm. This one seems like it should be in the "since 2.6.28" camp, since if I read that one right, it happens with 2.6.29.1.
(I mean sure, it might be new since 2.6.29, but it sounds more likely that it's already in 2.6.29)
I'd suspect it's possibly hardware related:
Quoted 8 lines
http://www.kerneloops.org/search.php?search=free_block&btnG=Function+Search
Look at the very similar call signatures - spanning almost all kernels back to v2.6.16. There's one spike at .27 - perhaps the same box trying up hard and crashing several times - or a popular distro kernel?
Or it's a really ancient bug going back to v2.6.16.
I have moved this one onto the list of regressions from 2.6.28. When it is confirmed that the bug is older, I'll drop it from there.
Thanks,
Rafael
Quoted 10 lines · Linus Torvalds
I think you put this in the wrong regression pile:
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13112
Subject : Oops indrain_array
Submitter : Bart <[email protected]>
Date : 2009-04-14 10:21 (3 days old)
References : http://marc.info/?l=linux-kernel&m=123970493224628&w=4
Quoted 5 lines
Hmm. This one seems like it should be in the "since 2.6.28" camp, since if I read that one right, it happens with 2.6.29.1.
(I mean sure, it might be new since 2.6.29, but it sounds more likely that it's already in 2.6.29)
I'd suspect it's possibly hardware related:
http://www.kerneloops.org/search.php?search=free_block&btnG=Function+Search
Look at the very similar call signatures - spanning almost all kernels back to v2.6.16. There's one spike at .27 - perhaps the same box trying up hard and crashing several times - or a popular distro kernel?
Or it's a really ancient bug going back to v2.6.16.
Ingo
David Miller
maintainerFrom: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:42:31 +0200 (CEST)
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>
Fixed by:
commit d407e32efe060afa2b9a797a91376ebc65b4ce11
Author: Anton Vorontsov <[email protected]> Date: Wed Apr 1 02:23:41 2009 +0400
PCI: Fix oops in pci_vpd_truncate
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might
happen:
sky2 driver version 1.22
Unable to handle kernel paging request for data at address 0x0000000c
Faulting instruction address: 0xc01836fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01836fc] pci_vpd_truncate+0x38/0x40
LR [c029be18] sky2_probe+0x14c/0x518
Call Trace:
[ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
[ef82be20] [c018a11c] local_pci_probe+0x24/0x34
[ef82be30] [c018a14c] pci_call_probe+0x20/0x30
[ef82be50] [c018a330] __pci_device_probe+0x64/0x78
[ef82be60] [c018a44c] pci_device_probe+0x30/0x58
[ef82be80] [c01aa270] really_probe+0x78/0x1a0
[ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
[ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
[ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
[ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
[ef82bf20] [c01aa87c] driver_register+0x6c/0x110
[ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
[ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
[ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
[ef82bfd0] [c0362240] do_initcalls+0x38/0x58
This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>Quoted 45 lines · David Miller
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:42:31 +0200 (CEST)Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>Fixed by:
commit
d407e32efe060afa2b9a797a91376ebc65b4ce11Author: Anton Vorontsov <[email protected]> Date: Wed Apr 1 02:23:41 2009 +0400PCI: Fix oops in pci_vpd_truncate pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58
Quoted 8 lines
This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>Thanks, closed.
Rafael
Quoted 45 lines · David Miller
From: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:42:31 +0200 (CEST)Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>Fixed by:
commit
d407e32efe060afa2b9a797a91376ebc65b4ce11Author: Anton Vorontsov <[email protected]> Date: Wed Apr 1 02:23:41 2009 +0400PCI: Fix oops in pci_vpd_truncate pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58
Quoted 8 lines
This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>Thanks, closed.
Rafael
David Miller
maintainerFrom: "Rafael J. Wysocki" <[email protected]>
Date: Thu, 16 Apr 2009 23:42:31 +0200 (CEST)
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13099
Subject : net, sky2: BUG: unable to handle kernel NULL pointer dereference,pci_vpd_truncate()
Submitter : Ingo Molnar <[email protected]>
Date : 2009-04-06 9:03 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123900867611321&w=4Handled-By Stephen Hemminger <[email protected]>
Fixed by:
commit d407e32efe060afa2b9a797a91376ebc65b4ce11
Author: Anton Vorontsov <[email protected]> Date: Wed Apr 1 02:23:41 2009 +0400
PCI: Fix oops in pci_vpd_truncate
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might
happen:
sky2 driver version 1.22
Unable to handle kernel paging request for data at address 0x0000000c
Faulting instruction address: 0xc01836fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01836fc] pci_vpd_truncate+0x38/0x40
LR [c029be18] sky2_probe+0x14c/0x518
Call Trace:
[ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
[ef82be20] [c018a11c] local_pci_probe+0x24/0x34
[ef82be30] [c018a14c] pci_call_probe+0x20/0x30
[ef82be50] [c018a330] __pci_device_probe+0x64/0x78
[ef82be60] [c018a44c] pci_device_probe+0x30/0x58
[ef82be80] [c01aa270] really_probe+0x78/0x1a0
[ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
[ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
[ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
[ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
[ef82bf20] [c01aa87c] driver_register+0x6c/0x110
[ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
[ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
[ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
[ef82bfd0] [c0362240] do_initcalls+0x38/0x58
This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Jesse Barnes <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <andi-Vw/[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200Handled-By H. Peter Anvin <[email protected]>
I think this got fixed already. The VGA moresettign was reverted back to the old order.
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13044
Subject : 2.6.30-rc1 can't find the root fs
Submitter : Heinz Diehl <htd-HjJ2MNWy62to6+H+lsi3Gti2O/[email protected]>
Date : 2009-04-08 13:35 (9 days old)
This was one of the async things that got fixed by just waiting for module async work to finish.
Linus
Quoted 10 lines · Linus Torvalds
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200Handled-By H. Peter Anvin <[email protected]>
Quoted 2 lines
I think this got fixed already. The VGA moresettign was reverted back to the old order.
Closed.
Quoted 7 lines
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13044
Subject : 2.6.30-rc1 can't find the root fs
Submitter : Heinz Diehl <[email protected]>
Date : 2009-04-08 13:35 (9 days old)This was one of the async things that got fixed by just waiting for module async work to finish.
Closed.
Thanks,
Rafael
Quoted 10 lines · Linus Torvalds
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200Handled-By H. Peter Anvin <[email protected]>
Quoted 2 lines
I think this got fixed already. The VGA moresettign was reverted back to the old order.
Closed.
Quoted 7 lines
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13044
Subject : 2.6.30-rc1 can't find the root fs
Submitter : Heinz Diehl <[email protected]>
Date : 2009-04-08 13:35 (9 days old)This was one of the async things that got fixed by just waiting for module async work to finish.
Closed.
Thanks,
Rafael
Quoted 7 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13098
Subject : 2.6.29-git12 breaks vga=0x0f07 on MSI/Intel GPU
Submitter : Andi Kleen <[email protected]>
Date : 2009-04-06 01:14 (11 days old)
References : http://lkml.org/lkml/2009/4/5/200Handled-By H. Peter Anvin <[email protected]>
I think this got fixed already. The VGA moresettign was reverted back to the old order.
Quoted 4 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13044
Subject : 2.6.30-rc1 can't find the root fs
Submitter : Heinz Diehl <[email protected]>
Date : 2009-04-08 13:35 (9 days old)
This was one of the async things that got fixed by just waiting for module async work to finish.
Linus
Quoted 6 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13118
Subject : iptables very slow after commit784544739a25c30637397ace5489eeb6e15d7d49Submitter : Jeff Chua <[email protected]> Date : 2009-04-10 16:05 (7 days old)
References : http://lkml.org/lkml/2009/4/10/111
Handled-By : Eric Dumazet <dada1-fPLkHRcR87vqlBn2x/[email protected]>
Several iterations of patches in progress. See [PATCH] netfilter: per-cpu spin-lock with recursion (v0.8)
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13066
Subject : Intel HD Audio oops
Submitter : Jeff Chua <[email protected]> Date : 2009-04-01 8:28 (16 days old)
References : http://marc.info/?l=linux-kernel&m=123857454625829&w=4
Fixed as of April 09 2009 git pull.
Thanks,
Jeff
Quoted 6 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13118
Subject : iptables very slow after commit784544739a25c30637397ace5489eeb6e15d7d49Submitter : Jeff Chua <[email protected]>
Date : 2009-04-10 16:05 (7 days old)
References : http://lkml.org/lkml/2009/4/10/111
Handled-By : Eric Dumazet <[email protected]>
Several iterations of patches in progress. See [PATCH] netfilter: per-cpu spin-lock with recursion (v0.8)
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13066
Subject : Intel HD Audio oops
Submitter : Jeff Chua <[email protected]>
Date : 2009-04-01 8:28 (16 days old)
References : http://marc.info/?l=linux-kernel&m=123857454625829&w=4
Fixed as of April 09 2009 git pull.
Thanks,
Jeff
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
Yakui, could you verify which patch should be taken please?
thanks,
rui
Quoted 21 lines · Zhang Rui
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
Quoted 4 lines
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
Yakui, could you verify which patch should be taken please?
The patch from Matthew is better.
It still can work even when the KMS is disabled by adding the boot option of "i915.modeset=0".
Hi, Matthew
Will you please push the patch?
thanks.
Quoted 8 lines
thanks,
rui--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 21 lines · Zhang Rui
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
Quoted 4 lines
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
Yakui, could you verify which patch should be taken please?
The patch from Matthew is better.
It still can work even when the KMS is disabled by adding the boot option of "i915.modeset=0".
Hi, Matthew
Will you please push the patch?
thanks.
Quoted 8 lines
thanks,
rui--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 21 lines · Zhang Rui
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
Quoted 2 lines
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
OK, closed 13095 as a duplicate.
Thanks,
Rafael
Quoted 21 lines · Zhang Rui
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
Quoted 2 lines
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
OK, closed 13095 as a duplicate.
Thanks,
Rafael
Quoted 11 lines · Rafael J. Wysocki
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13095
Subject : thinkpad-acpi: cannot control brightness with hotkeys
Submitter : Niel Lambrechts <[email protected]>
Date : 2009-04-11 23:07 (6 days old)
References : http://lkml.org/lkml/2009/4/11/160Handled-By Matthew Garrett <[email protected]>
Quoted 9 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13048
Subject :/sys/class/backlight/acpi_video0/*is gone on vaio laptop with Intel GM45.
Submitter : Rodrigo L. Batista <[email protected]>
Date : 2009-04-09 04:57 (8 days old)Handled-By yakui_zhao <[email protected]>Patch : http://bugzilla.kernel.org/attachment.cgi?id=20967
http://bugzilla.kernel.org/attachment.cgi?id=20959
bug 13095 is a duplicate of bug 13048. patches from Matthew and Yakui are for the same issue.
Yakui, could you verify which patch should be taken please?
thanks,
rui
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend Submitter : Alan Jenkins <[email protected]> Date : 2009-04-15 10:12 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979009508840&w=4
It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!
Signature · 5 lines
Lei Ming -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 14 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!
Please resend.
Rafael
Hi,
Quoted 14 lines · On Friday 17 April 2009 23:36:11 Rafael J. Wysocki wrote:
Quoted 13 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
Quoted 6 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
I'm reviewing the patch and I'll push it through my tree during the weekend. Sorry for the delay, I'm currently traveling.
Best regards,
Laurent Pinchart
Quoted 17 lines · Laurent Pinchart
Hi,
Quoted 14 lines · On Friday 17 April 2009 23:36:11 Rafael J. Wysocki wrote:
Quoted 13 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch
to [email protected], [email protected] and [email protected] to fix it, but still no echo from them.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
I'm reviewing the patch and I'll push it through my tree during the weekend.
Great, thanks a lot!
Quoted 1 line
Sorry for the delay, I'm currently traveling.
No problem at all. :-)
Thanks,
Rafael
Quoted 17 lines · Laurent Pinchart
Hi,
Quoted 14 lines · On Friday 17 April 2009 23:36:11 Rafael J. Wysocki wrote:
Quoted 13 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
I'm reviewing the patch and I'll push it through my tree during the weekend.
Great, thanks a lot!
Quoted 1 line
Sorry for the delay, I'm currently traveling.
No problem at all. :-)
Thanks,
Rafael
Hi,
Quoted 14 lines · On Friday 17 April 2009 23:36:11 Rafael J. Wysocki wrote:
Quoted 13 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 6 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
Quoted 6 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
I'm reviewing the patch and I'll push it through my tree during the weekend. Sorry for the delay, I'm currently traveling.
Best regards,
Laurent Pinchart
ÓÚ Fri, 17 Apr 2009 23:36:11 +0200
"Rafael J. Wysocki" <[email protected]> дµÀ:
Quoted 16 lines · Ming Lei
Quoted 15 lines
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected], [email protected] and [email protected] to fix it, but still no echo from them.
Quoted 8 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
Rafael
From 5715e310a939f3f7cd3e88eae8f25fedbb28def4 Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume , instead of zero.
This patch is against v2.6.30-rc2.
--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/uvc/uvc_video.c +1 -1
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs.
Signature · 6 lines
1.6.0.GIT -- Lei Ming
Quoted 22 lines · leiming
Quoted 2 lines
From
5715e310a939f3f7cd3e88eae8f25fedbb28def4Mon Sep 17 00:00:00 2001From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failedNow urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This patch is against v2.6.30-rc2.
Signed-off-by Ming Lei <[email protected]>--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/media/video/uvc/uvc_video.c +0
-0
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct uvc_video_device *video, · line 745
Quoted 5 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);
I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Linuse
Quoted 11 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
(quoted diff) +0
-0@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct > uvc_video_device *video,drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct uvc_video_device *video, · line 745
Quoted 4 lines
drivers/media/video/uvc/uvc_video.c +1
-1/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a
Now uvc only uses the previous allocated buffer in suspend/resume path, so the packet size doen't change in this path.
Quoted 1 line
potentially bigger number than the already allocated buffer, no?
If this case does exist, the URBs need to be updated and the patch is not enough.
Quoted 2 lines
So I think it should round down (ie use a regular divide). No?
Because the following fact:
uvc_alloc_urb_buffers()
{
...
video->urb_size = psize * npackets;
...
}so DIV_ROUND_UP still can work correctly.
Thanks!
Signature · 1 line
Lei Ming
Quoted 11 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
(quoted diff) +0
-0@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct > uvc_video_device *video,drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct uvc_video_device *video, · line 745
Quoted 4 lines
drivers/media/video/uvc/uvc_video.c +1
-1/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a
Now uvc only uses the previous allocated buffer in suspend/resume path, so the packet size doen't change in this path.
Quoted 1 line
potentially bigger number than the already allocated buffer, no?
If this case does exist, the URBs need to be updated and the patch is not enough.
Quoted 2 lines
So I think it should round down (ie use a regular divide). No?
Because the following fact:
uvc_alloc_urb_buffers()
{
...
video->urb_size = psize * npackets;
...
}so DIV_ROUND_UP still can work correctly.
Thanks!
Signature · 1 line
Lei Ming
Quoted 9 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
Review static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
(quoted diff) +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return DIV_ROUND_UP(video->urb_size, psize);I don't think this is right. It should round _down_.
Quoted 5 lines
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
Thanks.
From a3b3d72cdd57a0699fb643b41b78eb7beb211ff5 Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume , instead of zero.
This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case.
This patch is against v2.6.30-rc2.
--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/uvc/uvc_video.c +1 -1
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return video->urb_size / psize;/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs.
Signature · 8 lines
1.6.0.GIT -- Lei Ming
Quoted 16 lines · leiming
Quoted 13 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
Quoted 6 lines
Quoted 1 line
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
Thanks.
Thanks for the patch, I've updated the bug entry to point to it.
Best,
Rafael
Quoted 36 lines
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.This patch is against v2.6.30-rc2.
Signed-off-by Ming Lei <[email protected]>--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return video->urb_size / psize;/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs. Signature · 1 line
1.6.0.GIT
Quoted 16 lines · leiming
Quoted 13 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
Quoted 6 lines
Quoted 1 line
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
Thanks.
Thanks for the patch, I've updated the bug entry to point to it.
Best,
Rafael
Quoted 36 lines
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.This patch is against v2.6.30-rc2.
Signed-off-by Ming Lei <[email protected]>--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return video->urb_size / psize;/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs. Signature · 1 line
1.6.0.GIT
Quoted 12 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 9 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
Quoted 8 lines
Quoted 5 lines
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and video->urb_size shouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.
Quoted 7 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)
Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
Best regards,
Laurent Pinchart
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 19 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 18 lines
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 14 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(structuvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return DIV_ROUND_UP(video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Quoted 7 lines
Quoted 2 lines
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and
video->urb_sizeshouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.
Yes.
Quoted 17 lines
Quoted 8 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.
Quoted 4 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
The packet size does not change between suspend and resume. I mean uvc_alloc_urb_buffers()
still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no
such cases in uvcvideo now, but uvc_alloc_urb_buffers() really __can__
work in such case, isn't it?
IMHO It is only used to allocate or reserve UVC_URBS usb buffers, which size is video->urb_size, and
npackets can be shortened or enlarged if psize is changed, after all.
Thanks!
Signature · 1 line
Lei Ming
Hi,
Quoted 52 lines · On Tuesday 21 April 2009 03:47:34 Ming Lei wrote:
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 19 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 18 lines
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 14 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Quoted 7 lines
Quoted 2 lines
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and
video->urb_sizeshouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.Yes.
Quoted 16 lines
Quoted 7 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.Quoted 5 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
Quoted 8 lines
The packet size does not change between suspend and resume. I mean
uvc_alloc_urb_buffers()still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no such cases in uvcvideo now, butuvc_alloc_urb_buffers()really__can__work in such case, isn't it?IMHO It is only used to allocate or reserve
UVC_URBSusb buffers, which size isvideo->urb_size, and npackets can be shortened or enlarged if psize is changed, after all.
You're right. Patch applied, thanks.
Best regards,
Laurent Pinchart
Quoted 32 lines · On Wed, 22 Apr 2009 01:21:10 +0200 Laurent Pinchart…
Hi,
Quoted 29 lines · On Tuesday 21 April 2009 03:47:34 Ming Lei wrote:
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 16 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 6 lines
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001 From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.Quoted 5 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
The packet size does not change between suspend and resume. I mean
uvc_alloc_urb_buffers()still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no such cases in uvcvideo now, butuvc_alloc_urb_buffers()really__can__work in such case, isn't it?
Quoted 5 lines
Quoted 3 lines
IMHO It is only used to allocate or reserve
UVC_URBSusb buffers, which size isvideo->urb_size, and npackets can be shortened or enlarged if psize is changed, after all.You're right. Patch applied, thanks.
Rc5 has been released today, why isn't this patch accepted by upstream now? It is really a bug fix.
Thanks.
Quoted 5 lines
Best regards,
Laurent Pinchart
Signature · 1 line
Lei Ming
Quoted 3 lines · Ming Lei
Rc5 has been released today, why isn't this patch accepted by upstream now? It is really a bug fix.
I can take it directly, but was hoping to get it through the regular DVB tree. Haven't had a DVB update request yet (or maybe it got lost?)
Linus
Em Sat, 9 May 2009 09:24:51 -0700 (PDT)
Linus Torvalds <[email protected]> escreveu:
Quoted 9 lines · Ming Lei
Quoted 3 lines
Rc5 has been released today, why isn't this patch accepted by upstream now? It is really a bug fix.
Quoted 4 lines
I can take it directly, but was hoping to get it through the regular DVB tree. Haven't had a DVB update request yet (or maybe it got lost?)
Linus
The patch were added on my linux-next tree. I'll move it to the tree I handle bug fixes and I'll ask Linus to pull from it together with a few other fixes I have there, later today or tomorrow.
Cheers,
Mauro
Em Sat, 9 May 2009 09:24:51 -0700 (PDT)
Linus Torvalds <[email protected]> escreveu:
Quoted 9 lines · Ming Lei
Quoted 3 lines
Rc5 has been released today, why isn't this patch accepted by upstream now? It is really a bug fix.
Quoted 4 lines
I can take it directly, but was hoping to get it through the regular DVB tree. Haven't had a DVB update request yet (or maybe it got lost?)
Linus
The patch were added on my linux-next tree. I'll move it to the tree I handle bug fixes and I'll ask Linus to pull from it together with a few other fixes I have there, later today or tomorrow.
Cheers,
Mauro
Quoted 32 lines · On Wed, 22 Apr 2009 01:21:10 +0200 Laurent Pinchart…
Hi,
Quoted 29 lines · On Tuesday 21 April 2009 03:47:34 Ming Lei wrote:
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 16 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 6 lines
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001 From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.Quoted 5 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
The packet size does not change between suspend and resume. I mean
uvc_alloc_urb_buffers()still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no such cases in uvcvideo now, butuvc_alloc_urb_buffers()really__can__work in such case, isn't it?
Quoted 5 lines
Quoted 3 lines
IMHO It is only used to allocate or reserve
UVC_URBSusb buffers, which size isvideo->urb_size, and npackets can be shortened or enlarged if psize is changed, after all.You're right. Patch applied, thanks.
Rc5 has been released today, why isn't this patch accepted by upstream now? It is really a bug fix.
Thanks.
Quoted 5 lines
Best regards,
Laurent Pinchart
Signature · 1 line
Lei Ming
Hi,
Quoted 52 lines · On Tuesday 21 April 2009 03:47:34 Ming Lei wrote:
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 19 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 18 lines
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 14 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Quoted 7 lines
Quoted 2 lines
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and
video->urb_sizeshouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.Yes.
Quoted 16 lines
Quoted 7 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.Quoted 5 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
Quoted 8 lines
The packet size does not change between suspend and resume. I mean
uvc_alloc_urb_buffers()still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no such cases in uvcvideo now, butuvc_alloc_urb_buffers()really__can__work in such case, isn't it?IMHO It is only used to allocate or reserve
UVC_URBSusb buffers, which size isvideo->urb_size, and npackets can be shortened or enlarged if psize is changed, after all.
You're right. Patch applied, thanks.
Best regards,
Laurent Pinchart
2009/4/21 Laurent Pinchart <[email protected]>:
Quoted 19 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
Quoted 18 lines
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 14 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(structuvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return DIV_ROUND_UP(video->urb_size, psize);I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Quoted 7 lines
Quoted 2 lines
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and
video->urb_sizeshouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.
Yes.
Quoted 17 lines
Quoted 8 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.
Quoted 4 lines
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
The packet size does not change between suspend and resume. I mean uvc_alloc_urb_buffers()
still can be used in other cases if buffers was not freed and is reuesed in future. It seems there is no
such cases in uvcvideo now, but uvc_alloc_urb_buffers() really __can__
work in such case, isn't it?
IMHO It is only used to allocate or reserve UVC_URBS usb buffers, which size is video->urb_size, and
npackets can be shortened or enlarged if psize is changed, after all.
Thanks!
Signature · 1 line
Lei Ming
Quoted 12 lines · On Saturday 18 April 2009 06:51:11 leiming wrote:
On Fri, 17 Apr 2009 19:55:29 -0700 (PDT)
Quoted 9 lines · Linus Torvalds
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);I don't think this is right. It should round _down_.
Quoted 8 lines
Quoted 5 lines
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
psize and video->urb_size shouldn't have changed before and after resume, otherwise we'll get into trouble anyway. A regular divide and a round-up divide should then return the same result. I'll take the regular divide, as it will be more efficient.
Quoted 7 lines
Thanks.
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)
Quoted 8 lines
Now urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling
uvc_alloc_urb_buffers()in this kind of case.
The comment is misleading. If the packet size changes we need to reallocate the buffers anyway. Have you checked if the packet size (which depends on the endpoint being selected) can be changed between suspend and resume, either by the uvcvideo driver (I don't think it can) or the USB core ?
Best regards,
Laurent Pinchart
Quoted 9 lines · On Fri, 17 Apr 2009 19:55:29 -0700 (PDT) Linus Torvalds…
Review static int uvc_alloc_urb_buffers(struct · line 745
Quoted 6 lines
(quoted diff) +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return DIV_ROUND_UP(video->urb_size, psize);I don't think this is right. It should round _down_.
Quoted 5 lines
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Yes,you are correct, please ignore my last reply, and following is the fixed patch.
Thanks.
Quoted 1 line
From
a3b3d72cdd57a0699fb643b41b78eb7beb211ff5Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed(v2)
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume , instead of zero.
This version uses round down to return packet counts on Linus's suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case.
This patch is against v2.6.30-rc2.
--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/uvc/uvc_video.c +1 -1
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return video->urb_size / psize;/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs.
Signature · 8 lines
1.6.0.GIT -- Lei Ming
Quoted 22 lines · leiming
Quoted 2 lines
From
5715e310a939f3f7cd3e88eae8f25fedbb28def4Mon Sep 17 00:00:00 2001From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failedNow urb buffers is not freed before suspend, so
uvc_alloc_urb_buffersshould return packet counts allocated originally during uvc resume , instead of zero.This patch is against v2.6.30-rc2.
Signed-off-by Ming Lei <[email protected]>--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/media/video/uvc/uvc_video.c +0
-0
drivers/media/video/uvc/uvc_video.c static int uvc_alloc_urb_buffers(struct uvc_video_device *video, · line 745
Quoted 5 lines
drivers/media/video/uvc/uvc_video.c +1
-1@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);
I don't think this is right. It should round _down_.
It's supposed to return 'npackets', but if you pass it a different packet size than it was passed originally, it can now return a potentially bigger number than the already allocated buffer, no?
So I think it should round down (ie use a regular divide). No?
Linuse
于 Fri, 17 Apr 2009 23:36:11 +0200
Quoted 16 lines · Rafael J. Wysocki
Quoted 15 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 8 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References :
http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected], [email protected] and [email protected] to fix it, but still no echo from them.
Quoted 8 lines
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!Please resend.
Rafael
From 5715e310a939f3f7cd3e88eae8f25fedbb28def4 Mon Sep 17 00:00:00 2001
From: Ming Lei <[email protected]>
Date: Wed, 15 Apr 2009 22:32:51 +0800
Subject: [PATCH] V4L/DVB:usbvideo:fix uvc resume failed
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume , instead of zero.
This patch is against v2.6.30-rc2.
--- drivers/media/video/uvc/uvc_video.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/uvc/uvc_video.c +1 -1
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,/* Buffers are already allocated, bail out. */ if (video->urb_size) -return 0 ; +return DIV_ROUND_UP (video->urb_size, psize);/* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs.
Signature · 10 lines
1.6.0.GIT -- Lei Ming _______________________________________________ linux-pm mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/linux-pm
Quoted 14 lines · Ming Lei
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend
Submitter : Alan Jenkins <[email protected]>
Date : 2009-04-15 10:12 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979009508840&w=4It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
Quoted 4 lines
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!
Please resend.
Rafael
2009/4/17 Rafael J. Wysocki <[email protected]>:
Quoted 7 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject : active uvcvideo breaks over suspend Submitter : Alan Jenkins <[email protected]> Date : 2009-04-15 10:12 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123979009508840&w=4
It is a bug in resume path of uvcvideo driver, and I have sent a patch to [email protected],
[email protected] and [email protected] to fix it, but still no echo from them.
The patch title is V4L/DVB:usbvideo:fix uvc resume failed.
Rafael J.
If you would like to apply it ,I can resend to you. Thanks!
Signature · 1 line
Lei Ming
Zitat von "Rafael J. Wysocki" <[email protected]>:
Quoted 3 lines
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Two things on 2.6.30-rc2:
1) Kernel panic while shutting down the system:
http://m3y3r.de/wordpress/?p=67
2) Backlight daemon dies (hald-addon-macbookpro-backlight). Don't know why.
Config is:
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not setCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=y
# CONFIG_NET_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_STRIP_ASM_SYMS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=y
# CONFIG_OPROFILE_IBS is not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not setCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not setCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBD=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=yCONFIG_X86_DS=yCONFIG_X86_PTRACE_BTS=yCONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set CONFIG_X86_MCE_P4THERMAL=yCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=yCONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=yCONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=yCONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_EFI=yCONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x400000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x400000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#CONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not setCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_PM_TEST_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_SPEEDSTEP_ICH=yCONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not setCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not setCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=yCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=mCONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not setCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_DCCP=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_PROTO_UDPLITE=mCONFIG_NF_NAT_PROTO_SCTP=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not setCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=yCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_BRIDGE=y
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_DRR=yCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=yCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_FLOW=yCONFIG_NET_CLS_CGROUP=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=yCONFIG_NET_EMATCH_TEXT=yCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=yCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=yCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=yCONFIG_NET_ACT_SKBEDIT=yCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=y
# CONFIG_IRNET is not setCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not setCONFIG_BT=yCONFIG_BT_L2CAP=yCONFIG_BT_SCO=yCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=yCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=m
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=yCONFIG_RFKILL_INPUT=mCONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not setCONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not setCONFIG_MTD_SLRAM=mCONFIG_MTD_PHRAM=m
# CONFIG_MTD_MTDRAM is not setCONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not setCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not setCONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID6_PQ=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=yCONFIG_DM_SNAPSHOT=yCONFIG_DM_MIRROR=yCONFIG_DM_ZERO=yCONFIG_DM_MULTIPATH=yCONFIG_DM_DELAY=yCONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=y
# CONFIG_IEEE1394 is not setCONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=yCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=yCONFIG_I2O_BLOCK=yCONFIG_I2O_SCSI=yCONFIG_I2O_PROC=yCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_COMPAT_NET_DEV_OPS=yCONFIG_IFB=yCONFIG_DUMMY=yCONFIG_BONDING=mCONFIG_MACVLAN=mCONFIG_EQUALIZER=mCONFIG_TUN=yCONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not setCONFIG_MII=yCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not setCONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not setCONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not setCONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not setCONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not setCONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not setCONFIG_PPP_MPPE=yCONFIG_PPPOE=yCONFIG_PPPOL2TP=y
# CONFIG_SLIP is not setCONFIG_SLHC=y
# CONFIG_NET_FC is not setCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not setCONFIG_MOUSE_APPLETOUCH=yCONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not setCONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not setCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not setCONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not setCONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=y
# CONFIG_HPET_MMAP is not setCONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not setCONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not setCONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not setCONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not setCONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not setCONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not setCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not setCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=yCONFIG_MEDIA_TUNER_MT20XX=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_MC44S803=yCONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not setCONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not setCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not setCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_HWDEP=yCONFIG_SND_RAWMIDI=yCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not setCONFIG_SND_HRTIMER=yCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=yCONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not setCONFIG_SND_DUMMY=yCONFIG_SND_VIRMIDI=y
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not setCONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not setCONFIG_SND_HDA_INTEL=yCONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not setCONFIG_SND_HDA_INPUT_BEEP=yCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_ATIHDMI=yCONFIG_SND_HDA_CODEC_NVHDMI=yCONFIG_SND_HDA_CODEC_INTELHDMI=yCONFIG_SND_HDA_ELD=yCONFIG_SND_HDA_CODEC_CONEXANT=yCONFIG_SND_HDA_CODEC_CMEDIA=yCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_APPLE=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not setCONFIG_HID_EZKEY=yCONFIG_HID_KYE=yCONFIG_HID_GYRATION=yCONFIG_HID_KENSINGTON=yCONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not setCONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not setCONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not setCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_FS_XIP=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=yCONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not setCONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not setCONFIG_CIFS=y
# CONFIG_CIFS_STATS is not setCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_DFS_UPCALL=yCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_HW_BRANCH_TRACER=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_RING_BUFFER=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not setCONFIG_4KSTACKS=yCONFIG_DOUBLEFAULT=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not setCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=yCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_SALSA20=yCONFIG_CRYPTO_SALSA20_586=yCONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=yCONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
# CONFIG_LGUEST is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=yCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_BALLOON=yCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
greets
thomas
Quoted 8 lines · Thomas Meyer
Zitat von "Rafael J. Wysocki" <[email protected]>:
Quoted 4 lines
If you know of any other unresolved regressions from 2.6.29, please let me know
either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Quoted 4 lines
Two things on 2.6.30-rc2:
1) Kernel panic while shutting down the system:
http://m3y3r.de/wordpress/?p=67
Can you pleaes open a Bugzilla entry for this one (please add my address to the CC list of the bug entry)?
Quoted 1 line
2) Backlight daemon dies (hald-addon-macbookpro-backlight). Don't know why.
Isn't that bug #13048?
Rafael
Quoted 12 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.29, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
[...]
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4
The regression here is that I added a printk() to inform about beacon loss. The issue has been there a long time, the printk() just exposed it.
Michael wrote a patch which silences the printk:
I fixed the beacon loss detection here:
John, I think Michael's patch should be sent to 2.6.30. Any chances for that?
Rafael, is it possible to send your regression mails to [email protected] as well? Very few wireless developers have time to follow netdev or lkml.
Signature · 1 line
Kalle Valo
Quoted 33 lines · Kalle Valo
Quoted 12 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.29, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
[...]
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4The regression here is that I added a
printk()to inform about beacon loss. The issue has been there a long time, theprintk()just exposed it.Michael wrote a patch which silences the printk:
I fixed the beacon loss detection here:
Quoted 8 lines
John, I think Michael's patch should be sent to 2.6.30. Any chances for that?
Rafael, is it possible to send your regression mails to [email protected] as well? Very few wireless developers have time to follow netdev or lkml.
Sure, the next reports will go there too.
Best,
Rafael
Quoted 5 lines · Rafael J. Wysocki
Quoted 3 lines
Rafael, is it possible to send your regression mails to [email protected] as well? Very few wireless developers have time to follow netdev or lkml.
Sure, the next reports will go there too.
Thanks a lot. We already got a new report.
Signature · 1 line
Kalle Valo
Quoted 33 lines · Kalle Valo
Quoted 12 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.29, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
[...]
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4The regression here is that I added a
printk()to inform about beacon loss. The issue has been there a long time, theprintk()just exposed it.Michael wrote a patch which silences the printk:
I fixed the beacon loss detection here:
Quoted 8 lines
John, I think Michael's patch should be sent to 2.6.30. Any chances for that?
Rafael, is it possible to send your regression mails to [email protected] as well? Very few wireless developers have time to follow netdev or lkml.
Sure, the next reports will go there too.
Best,
Rafael
Quoted 12 lines · Rafael J. Wysocki
This message contains a list of some regressions from 2.6.29, for which there are no fixes in the mainline I know of. If any of them have been fixed already, please let me know.
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to this message with CCs to the people involved in reporting and handling the issue.
[...]
Quoted 5 lines
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13067
Subject : iwl3945: wlan0: beacon loss from AP - sending probe request
Submitter : Maciej Rutecki <[email protected]>
Date : 2009-04-05 9:11 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123892272218266&w=4
The regression here is that I added a printk() to inform about beacon loss. The issue has been there a long time, the printk() just exposed it.
Michael wrote a patch which silences the printk:
I fixed the beacon loss detection here:
John, I think Michael's patch should be sent to 2.6.30. Any chances for that?
Rafael, is it possible to send your regression mails to [email protected] as well? Very few wireless developers have time to follow netdev or lkml.
Signature · 1 line
Kalle Valo
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · On Friday 17 April 2009 10:48:38 you wrote:
Quoted 5 lines · Ed Tomlinson
Quoted 3 lines · On Thursday 16 April 2009 17:42:31 you wrote:
If you know of any other unresolved regressions from 2.6.29, please let me know either and I'll add them to the list. Also, please let me know if any of the entries below are invalid.
Quoted 7 lines
Quoted 4 lines
Rafael,
Do you want a bug raised? The stall reported in thread "2.6.30-rc1 A few issues and a stall" is still a problem with rc2. The other issues mentioned in the thread are fixed.
If there's only one issue remaining unfixed, please file a bug in the Bugzilla and put my address in the CC list of the bug entry.
There is not need for me to raise a bug. The problem is fixed with rc3 + Dave Miller's latest network tree for Linus.
Thanks
Ed