Skip to contentSkip to conversation

OMAP clock: GPIO de-bounce clocks don't affect module idle state

PATCH New Paul Walmsley 2 participants 2 messages May 5, 2009 – May 6, 2009

Subsystems (4)
lore
Share & tools
lore

Paul Walmsley

author maintainer
#0 lore raw

PATCH 1/1 OMAP clock: GPIO de-bounce clocks don't affect module idle state

GPIO de-bounce clocks don't have any impact on the module idle state, so the clock code should not wait for the module to enable after the de-bounce clocks are enabled.

Problem found by Kevin Hilman <[email protected]>.

---
 arch/arm/mach-omap2/clock34xx.h |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/clock34xx.h +6 -6
index 6763b8f..017a30e 100644
@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
Signature · 1 line
1.6.3.rc1.51.gea0b7
maintainer
#1 lore raw

PATCH 1/1 OMAP clock: GPIO de-bounce clocks don&#39;t affect module idle

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Initial commit ID (Likely to change): 2489dcb52022e4a8d2747e7c18c844cd139610c6

PatchWorks
http://patchwork.kernel.org/patch/21946/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=2489dcb52022e4a8d2747e7c18c844cd139610c6