Skip to contentSkip to conversation

ARM: OMAP: Fix beagleboard EHCI setup

PATCH New Koen Kooi 2 participants 2 messages Sep 23, 2009

Subsystems (3)
lore
Share & tools
lore

Koen Kooi

author
#0 lore raw

PATCH 1/1 ARM: OMAP: Fix beagleboard EHCI setup

From: Koen Kooi <[email protected]>

The EHCI configuration in the beagleboard board file was copy/pasted from the sdp one and hence wrong. The beagleboard only used one port and lacks a charge pump.

Tested on revision C1D and C3 boards

---
 arch/arm/mach-omap2/board-omap3beagle.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-omap2/board-omap3beagle.c +3 -3
index 496b4a0..aa403e6 100644
@@ -406,10 +406,10 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = true,
+	.chargepump = false,
 	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
 	.reset_gpio_port[2]  = -EINVAL
 };
 
Signature · 1 line
1.6.2.4
maintainer
#1 lore raw

PATCH 1/1 ARM: OMAP: Fix beagleboard EHCI setup

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: ehci

Initial commit ID (Likely to change): d50444d8e996b33ac01939bc2a652dbfe2814fc1

PatchWorks
http://patchwork.kernel.org/patch/49494/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=d50444d8e996b33ac01939bc2a652dbfe2814fc1