rx51: add wl1251 wlan driver support
Subsystems (3)
PATCH v2 1/1 rx51: add wl1251 wlan driver support
From: Kalle Valo <[email protected]>
wl1251 is connected to the SPI bus in rx51, add support for this.
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 85 ++++++++++++++++++++++++++ 1 files changed, 85 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board-rx51-peripherals.c +85 -0
@@ -14,6 +14,7 @@#include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> +#include <linux/spi/wl12xx.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> #include <linux/clk.h>
@@ -36,6 +37,37 @@#define SYSTEM_REV_B_USES_VAUX3 0x1699#define SYSTEM_REV_S_USES_VAUX3 0x8 +#define RX51_WL1251_POWER_GPIO 87 +#define RX51_WL1251_IRQ_GPIO 42 + +static void rx51_wl1251_set_power (bool enable); + +static struct wl12xx_platform_data wl1251_pdata = { + .set_power = rx51_wl1251_set_power, +}; + +static struct omap2_mcspi_device_config wl1251_mcspi_config = { + .turbo_mode =0 , + .single_channel =1 , +}; + +/* list all spi devices here */ +enum { +RX51_SPI_WL1251 , +}; + +static struct spi_board_info rx51_peripherals_spi_board_info[]__initdata = { + [RX51_SPI_WL1251 ] = { + .modalias ="wl1251" , + .bus_num =4 , + .chip_select =0 , + .max_speed_hz =48000000 , + .mode =SPI_MODE_2 , + .controller_data = &wl1251_mcspi_config, + .platform_data = &wl1251_pdata, + }, +}; +static int board_keymap[] = {KEY (0 ,0 ,KEY_Q ),KEY (0 ,1 ,KEY_O ),
@@ -257,6 +289,55 @@ static struct regulator_init_data rx51_vdac = { }, }; +static void rx51_wl1251_set_power (bool enable) +{ +gpio_set_value (RX51_WL1251_POWER_GPIO , enable); +} + +static void __init rx51_init_wl1251 (void ) +{ +int irq, ret; + + ret =gpio_request (RX51_WL1251_POWER_GPIO ,"wl1251 power" ); +if (ret <0 ) + goto error; + + ret =gpio_direction_output (RX51_WL1251_POWER_GPIO ,0 ); +if (ret <0 ) + goto err_power; + + ret =gpio_request (RX51_WL1251_IRQ_GPIO ,"wl1251 irq" ); +if (ret <0 ) + goto err_power; + + ret =gpio_direction_input (RX51_WL1251_IRQ_GPIO ); +if (ret <0 ) + goto err_irq; + + irq =gpio_to_irq (RX51_WL1251_IRQ_GPIO ); +if (irq <0 ) + goto err_irq; + + rx51_peripherals_spi_board_info[RX51_SPI_WL1251 ].irq = irq; + +return ; + +err_irq: +gpio_free (RX51_WL1251_IRQ_GPIO ); + +err_power: +gpio_free (RX51_WL1251_POWER_GPIO ); + +error: +printk (KERN_ERR "wl1251 board initialisation failed\n" ); + wl1251_pdata.set_power =NULL ; + +/* +* Now rx51_peripherals_spi_board_info[1].irq is zero and +* set_power is null, and wl1251_probe() will fail. +*/ +} +static int rx51_twlgpio_setup (struct device *dev,unsigned gpio,unsigned n) {/* FIXME this gpio setup is just a placeholder for now */
@@ -538,6 +619,10 @@ static inline void board_smc91x_init(void)void __init rx51_peripherals_init (void ) { +rx51_init_wl1251 (); + +spi_register_board_info (rx51_peripherals_spi_board_info, +ARRAY_SIZE (rx51_peripherals_spi_board_info));rx51_i2c_init ();board_onenand_init ();board_smc91x_init ();
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
maintainerPATCH v2 1/1 rx51: add wl1251 wlan driver support
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: for-next
Initial commit ID (Likely to change): 342dd6ea3d2067e84c0fdee5e07e264ce40827e0
PatchWorks
http://patchwork.kernel.org/patch/60697/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=342dd6ea3d2067e84c0fdee5e07e264ce40827e0