Skip to contentSkip to conversation

omap3evm: Configure GPIO175 for touchscreen PEN_IRQ

PATCH New Sanjeev Premi 2 participants 2 messages Feb 5, 2010 – Feb 11, 2010

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 3/3 omap3evm: Configure GPIO175 for touchscreen PEN_IRQ

GPIO175 is used for PEN_IRQ on the EVM. This patch sets the mux settings for the same.

---
 arch/arm/mach-omap2/board-omap3evm.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/board-omap3evm.c +3 -1
index c8e1208..00bfe9b 100644
@@ -430,7 +430,9 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_INPUT_PULLUP |
 				OMAP_PIN_OFF_WAKEUPENABLE),
-
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP |
+				OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
Signature · 1 line
1.6.2.2
maintainer
#1 lore raw

PATCH 3/3 omap3evm: Configure GPIO175 for touchscreen PEN_IRQ

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: for-next

Initial commit ID (Likely to change): a504fd55c8d47a57efe18df5f8d44cb8925abdda

PatchWorks
http://patchwork.kernel.org/patch/77307/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=a504fd55c8d47a57efe18df5f8d44cb8925abdda