OMAP: McBSP: Drop unnecessary status/error bit clearing on reg_cache retrieved register values
Subsystems (2)
PATCH 1/1 OMAP: McBSP: Drop unnecessary status/error bit clearing on reg_cache retrieved register values
The MsBSP register cache will never have any error/status flags set, since these flags are never written to the reg_cache. So it is kind of not necessary to clear these flags, which are actually always 0.
In other words, clearing the status/error flags are not necessary, since the reg_cache will never got these bits set. We can just write back the register content from the cache as it is when clearing an error condition.
Created against l-o for-next commit 62a7c2cc4c8e57e80ccf379536f362fe6e863ac3 dated 2010-02-22.
Tested on Amstrad Delta.
---
Quoted 11 lines · Friday 15 January 2010 10:11:28 Peter Ujfalusi wrote:
...
Review int omap_mcbsp_pollwrite(unsigned int id · line 660
Quoted 6 lines
(quoted diff) +1
-1@@ -653,7 +657,7 @@ int omap_mcbsp_pollwrite(unsigned int id if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) { /* clear error */ MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) & (~XSYNC_ERR)); + MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR));Well, I think here also, the
reg_cachedoes not have theXSYNC_ERRset, it is only set in the McBSP register.
Peter,
Yes, that's right.
Quoted 4 lines
Quoted 4 lines
(quoted diff) +0
-0/* resend */ return -1; } else {@@ -662,10 +666,12 @@ int omap_mcbsp_pollwrite(unsigned int id
Quoted 8 lines
Review int omap_mcbsp_pollwrite(unsigned int id · line 670
Quoted 6 lines
(quoted diff) +2
-1while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) { if (attemps++ > 1000) { MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) & (~XRST)); + MCBSP_READ_CACHE(mcbsp, SPCR2) & + (~XRST));Also here, the XRST will surely not set in the cached SPCR2...
Probably not. XRST and other xRST flags seem to be controlled by software only, and can be actually set by omap_mcbsp_request() to get required functional blocks out of reset state. Here it is toggled back and forth, so the code has to reset it explicitly and then set it back again.
Quoted 1 line
This applies fro all other cases regarding to status/error bits in McBSP.
You probably managed to point out all applicable cases, since I was not able to find more, neither while examining the code itself nor reviewing the SPRU592E reference one more time.
Quoted 8 lines
Quoted 8 lines
(quoted diff) +2
-1udelay(10); MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) | (XRST)); + MCBSP_READ_CACHE(mcbsp, SPCR2) | + (XRST)); udelay(10);dev_err(mcbsp->dev, "Could not write to" " McBSP%d Register\n",
mcbsp->id);
Thanks,
Janusz
arch/arm/plat-omap/mcbsp.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
arch/arm/plat-omap/mcbsp.c renamed from arch/arm/plat-omap/mcbsp.c.orig +4 -8
@@ -133,8 +133,7 @@ static irqreturn_t omap_mcbsp_tx_irq_handev_err (mcbsp_tx->dev,"TX Frame Sync Error! : 0x%x\n" , irqst_spcr2);/* Writing zero to XSYNC_ERR clears the IRQ */ -MCBSP_WRITE (mcbsp_tx,SPCR2 , -MCBSP_READ_CACHE (mcbsp_tx,SPCR2 ) & ~(XSYNC_ERR )); +MCBSP_WRITE (mcbsp_tx,SPCR2 ,MCBSP_READ_CACHE (mcbsp_tx,SPCR2 )); }else {complete (&mcbsp_tx->tx_irq_completion); }
@@ -154,8 +153,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handev_err (mcbsp_rx->dev,"RX Frame Sync Error! : 0x%x\n" , irqst_spcr1);/* Writing zero to RSYNC_ERR clears the IRQ */ -MCBSP_WRITE (mcbsp_rx,SPCR1 , -MCBSP_READ_CACHE (mcbsp_rx,SPCR1 ) & ~(RSYNC_ERR )); +MCBSP_WRITE (mcbsp_rx,SPCR1 ,MCBSP_READ_CACHE (mcbsp_rx,SPCR1 )); }else {complete (&mcbsp_rx->tx_irq_completion); }
@@ -934,8 +932,7 @@ int omap_mcbsp_pollwrite(unsigned int id/* if frame sync error - clear the error */ if (MCBSP_READ (mcbsp,SPCR2 ) &XSYNC_ERR ) {/* clear error */ -MCBSP_WRITE (mcbsp,SPCR2 , -MCBSP_READ_CACHE (mcbsp,SPCR2 ) & (~XSYNC_ERR )); +MCBSP_WRITE (mcbsp,SPCR2 ,MCBSP_READ_CACHE (mcbsp,SPCR2 ));/* resend */ return -1 ; }else {
@@ -975,8 +972,7 @@ int omap_mcbsp_pollread(unsigned int id,/* if frame sync error - clear the error */ if (MCBSP_READ (mcbsp,SPCR1 ) &RSYNC_ERR ) {/* clear error */ -MCBSP_WRITE (mcbsp,SPCR1 , -MCBSP_READ_CACHE (mcbsp,SPCR1 ) & (~RSYNC_ERR )); +MCBSP_WRITE (mcbsp,SPCR1 ,MCBSP_READ_CACHE (mcbsp,SPCR1 ));/* resend */ return -1 ; }else {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · On Tue, 23 Feb 2010 16:50:38 +0100 Janusz Krzysztofik <[email protected]>…
The MsBSP register cache will never have any error/status flags set, since these flags are never written to the
reg_cache. So it is kind of not necessary to clear these flags, which are actually always 0.In other words, clearing the status/error flags are not necessary, since the
reg_cachewill never got these bits set. We can just write back the register content from the cache as it is when clearing an error condition.
Quoted 7 lines
Created against l-o for-next commit
62a7c2cc4c8e57e80ccf379536f362fe6e863ac3dated 2010-02-22.
Tested on Amstrad Delta.Reported-by Peter Ujfalusi <[email protected]>Signed-off-by Janusz Krzysztofik <[email protected]>
Thursday 04 March 2010 07:49:57 Jarkko Nikula napisał(a):
Quoted 12 lines
On Tue, 23 Feb 2010 16:50:38 +0100
Quoted 9 lines · Janusz Krzysztofik
The MsBSP register cache will never have any error/status flags set, since these flags are never written to the
reg_cache. So it is kind of not necessary to clear these flags, which are actually always 0.In other words, clearing the status/error flags are not necessary, since the
reg_cachewill never got these bits set. We can just write back the register content from the cache as it is when clearing an error condition.
Quoted 8 lines
Quoted 6 lines
Created against l-o for-next commit
62a7c2cc4c8e57e80ccf379536f362fe6e863ac3dated 2010-02-22. Tested on Amstrad Delta.Reported-by Peter Ujfalusi <[email protected]>Signed-off-by Janusz Krzysztofik <[email protected]>Acked-by Jarkko Nikula <[email protected]>
Jarkko, thanks.
Tony,
It looks like my initial submission extra comments (quoted discussion with Peter) was so confusing, that you had erratically marked this path with "changes requested" in your patchowrk, so it get archived. Here is the URL, just in case you have troubles finding it now for applying :)
http://patchwork.kernel.org/patch/81476/
Thanks,
Janusz
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/1 OMAP: McBSP: Drop unnecessary status/error bit clearing on
In reply to Janusz KrzysztofikThis patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: omap-fixes
Initial commit ID (Likely to change): 28c60b4bee6a948791d68d305701ec2d63ed22fc
PatchWorks
http://patchwork.kernel.org/patch/81476/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=28c60b4bee6a948791d68d305701ec2d63ed22fc