Skip to contentSkip to conversation

omap4 i2c board support and fixes

PATCH In review Santosh Shilimkar 2 participants 11 messages Apr 7, 2010 – May 12, 2010

Subsystems (4)
Arm (32-bit) Arm sub-architectures OMAP2+ support Watchdog device drivers
lore
Share & tools
lore

Santosh Shilimkar

author
#0 lore raw

cover omap4 i2c board support and fixes

This series mainly adds I2C board data for OMAP4430 SDP and few needed fixes. I have made this into one series just for simplcity otherwise couple patches are independent. The intent is to get it merged in linux-omap master for testing. The needed I2C driver support is already merged in l-o master

It's generated against latest linux-omap master and tested with omap4430 and omap3430 sdps with regular and multi-omap defconfig

Balaji T K (2):
omap4: add i2c1 peripherals data
omap4: Enable RTC and regulator support

Richard Woodruff (1):
omap4: Fix build break when used with gcc-4.4.1 (2009-q3)

Santosh Shilimkar (3):
omap4: Fix WDT Kconfig
omap4: Fix McBSP4 base address
omap4: Add i2c board support on omap4430 sdp platform

 arch/arm/configs/omap_4430sdp_defconfig |   39 ++++++-
 arch/arm/mach-omap2/board-4430sdp.c     |  187 +++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap-headsmp.S      |    6 +-
 arch/arm/mach-omap2/omap44xx-smc.S      |    2 +-
 arch/arm/plat-omap/i2c.c                |   21 +++-
 arch/arm/plat-omap/include/plat/mcbsp.h |    2 +-
 drivers/watchdog/Kconfig                |    6 +-
 7 files changed, 249 insertions(+), 14 deletions(-)
author
#1 lore raw

PATCH 1/6 omap4: Fix build break when used with gcc-4.4.1 (2009-q3)

From: Richard Woodruff <[email protected]>

This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin.

arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1

Signed-off-by Richard Woodruff <[email protected]>
Signed-off-by Santosh Shilimkar <[email protected]>
---
 arch/arm/mach-omap2/omap-headsmp.S |    6 +++---
 arch/arm/mach-omap2/omap44xx-smc.S |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-omap2/omap-headsmp.S +3 -3
index aa3f65c..ef0e7a0 100644
@@ -33,7 +33,7 @@
 ENTRY(omap_secondary_startup)
 hold:	ldr	r12,=0x103
 	dsb
-	smc				@ read from AuxCoreBoot0
+	smc	#0			@ read from AuxCoreBoot0
 	mov	r0, r0, lsr #9
 	mrc	p15, 0, r4, c0, c0, 5
 	and	r4, r4, #0x0f

@@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r1-r12, pc}
 END(omap_modify_auxcoreboot0)
 

@@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr)
 	stmfd   sp!, {r2-r12, lr}
 	ldr	r12, =0x105
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_auxcoreboot_addr)
arch/arm/mach-omap2/omap44xx-smc.S +1 -1
index 89bb2b1..f61c777 100644
@@ -27,6 +27,6 @@ ENTRY(omap_smc1)
 	mov	r12, r0
 	mov 	r0, r1
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_smc1)
Signature · 1 line
1.6.0.4
author
#2 lore raw

PATCH 2/6 omap4: Fix WDT Kconfig

This patch allows Watchdog timer to be selected for OMAP4 by fixing Kconfig entry

Signed-off-by Santosh Shilimkar <[email protected]>
Cc Wim Van Sebroeck <[email protected]>
---
 drivers/watchdog/Kconfig |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/watchdog/Kconfig +3 -3
index bdcdbd5..ea5b269 100644
@@ -199,10 +199,10 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
-	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "PNX4008 Watchdog"
Signature · 1 line
1.6.0.4
author
#3 lore raw

PATCH 3/6 omap4: Fix McBSP4 base address

This patch fixes the McBSP4 base address for OMAP4

Signed-off-by Balaji T K <[email protected]>
---
 arch/arm/plat-omap/include/plat/mcbsp.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/plat-omap/include/plat/mcbsp.h +1 -1
index 3974835..7de903d 100644
@@ -59,7 +59,7 @@
 #define OMAP44XX_MCBSP1_BASE	0x49022000
 #define OMAP44XX_MCBSP2_BASE	0x49024000
 #define OMAP44XX_MCBSP3_BASE	0x49026000
-#define OMAP44XX_MCBSP4_BASE	0x48074000
+#define OMAP44XX_MCBSP4_BASE	0x48096000
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
Signature · 1 line
1.6.0.4
author
#4 lore raw

PATCH 4/6 omap4: Add i2c board support on omap4430 sdp platform

This patch adds the i2c board support for OMAP4430 SDP platform. The necessary drivers support patch is posted earlier.

https://patchwork.kernel.org/patch/80659/

Signed-off-by Santosh Shilimkar <[email protected]>
Signed-off-by Balaji T K <[email protected]>
---
 arch/arm/configs/omap_4430sdp_defconfig |   19 +++++++++++++++++--
 arch/arm/mach-omap2/board-4430sdp.c     |   10 ++++++++++
 arch/arm/plat-omap/i2c.c                |   21 +++++++++++++++++++--
 3 files changed, 46 insertions(+), 4 deletions(-)
arch/arm/configs/omap_4430sdp_defconfig +17 -2
index a96bca2..79b3ab1 100644
@@ -456,8 +456,23 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
 
 #
 # PPS support
arch/arm/mach-omap2/board-4430sdp.c +10 -0
index b88f28c..b6c9446 100644
@@ -111,8 +111,18 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static int __init omap4_i2c_init(void)
+{
+	/* Phoenix Audio IC needs I2C1 to start with 400 KHz and less */
+	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
 static void __init omap_4430sdp_init(void)
 {
+	omap4_i2c_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
 	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
arch/arm/plat-omap/i2c.c +19 -2
index 624e262..87bc3f1 100644
@@ -35,6 +35,7 @@
 #define OMAP2_I2C_BASE1		0x48070000
 #define OMAP2_I2C_BASE2		0x48072000
 #define OMAP2_I2C_BASE3		0x48060000
+#define OMAP2_I2C_BASE4		0x48350000
 
 static const char name[] = "i2c_omap";
 

@@ -54,9 +55,16 @@ static struct resource i2c_resources[][2] = {
 #if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
 #endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, OMAP44XX_IRQ_I2C2) },
+#endif
 #if	defined(CONFIG_ARCH_OMAP3)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
 #endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, OMAP44XX_IRQ_I2C3) },
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE4, OMAP44XX_IRQ_I2C4) },
+#endif
 };
 
 #define I2C_DEV_BUILDER(bus_id, res, data)		\

@@ -73,12 +81,15 @@ static struct resource i2c_resources[][2] = {
 static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
 #endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_rate[3]),
+#endif
 };
 
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))

@@ -93,6 +104,8 @@ static int __init omap_i2c_nr_ports(void)
 		ports = 2;
 	else if (cpu_is_omap34xx())
 		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
 
 	return ports;
 }

@@ -113,6 +126,10 @@ static int __init omap_i2c_add_bus(int bus_id)
 			base = OMAP2_I2C_BASE1;
 			irq = INT_24XX_I2C1_IRQ;
 		}
+		if (cpu_is_omap44xx()) {
+			base = OMAP2_I2C_BASE1;
+			irq = OMAP44XX_IRQ_I2C1;
+		}
 		res[0].start = base;
 		res[0].end = base + OMAP_I2C_SIZE;
 		res[1].start = irq;
Signature · 1 line
1.6.0.4
author
#5 lore raw

PATCH 5/6 omap4: add i2c1 peripherals data

From: Balaji T K <[email protected]>

This patch adds i2c1 peripherals data to
omap4430 sdp board file.

Signed-off-by Rajendra Nayak <[email protected]>
Signed-off-by Balaji T K <[email protected]>
---
 arch/arm/mach-omap2/board-4430sdp.c |  179 ++++++++++++++++++++++++++++++++++-
 1 files changed, 178 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/board-4430sdp.c +178 -1
index b6c9446..32cbd72 100644
@@ -18,6 +18,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>

@@ -78,6 +80,25 @@ static int __init omap_l2_cache_init(void)
 early_initcall(omap_l2_cache_init);
 #endif
 
+
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+	},
+	{
+		.supply = "vmmc",
+	},
+	{
+		.supply = "vmmc",
+	},
+	{
+		.supply = "vmmc",
+	},
+	{
+		.supply = "vmmc",
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	void __iomem *base;

@@ -111,10 +132,166 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct regulator_init_data sdp4430_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data sdp4430_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 5,
+	.consumer_supplies      = sdp4430_vmmc_supply,
+};
+
+static struct regulator_init_data sdp4430_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &sdp4430_vmmc,
+	.vpp		= &sdp4430_vpp,
+	.vusim		= &sdp4430_vusim,
+	.vana		= &sdp4430_vana,
+	.vcxio		= &sdp4430_vcxio,
+	.vdac		= &sdp4430_vdac,
+	.vusb		= &sdp4430_vusb,
+	.vaux1		= &sdp4430_vaux1,
+	.vaux2		= &sdp4430_vaux2,
+	.vaux3		= &sdp4430_vaux3,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &sdp4430_twldata,
+	},
+};
+
 static int __init omap4_i2c_init(void)
 {
 	/* Phoenix Audio IC needs I2C1 to start with 400 KHz and less */
-	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	omap_register_i2c_bus(4, 400, NULL, 0);
Signature · 1 line
1.6.0.4
author
#6 lore raw

PATCH 6/6 omap4: Enable RTC and regulator support

From: Balaji T K <[email protected]>

This patch enables RTC and regulator support on omap4430 sdp platform.

Signed-off-by Balaji T K <[email protected]>
Signed-off-by Santosh Shilimkar <[email protected]>
---
 arch/arm/configs/omap_4430sdp_defconfig |   20 ++++++++++++++++++--
 1 files changed, 18 insertions(+), 2 deletions(-)
arch/arm/configs/omap_4430sdp_defconfig +18 -2
index 79b3ab1..b7ddc7a 100644
@@ -523,11 +523,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
 # CONFIG_MEDIA_SUPPORT is not set
 
 #

@@ -556,12 +557,27 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# I2C TWL drivers
+#
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_REGULATOR_TWL4030=y
+
+#
 # TI VLYNQ
 #
 # CONFIG_STAGING is not set
Signature · 1 line
1.6.0.4
maintainer
#7 lore raw

PATCH 3/6 omap4: Fix McBSP4 base address

In reply to Santosh Shilimkar

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: omap-fixes

Initial commit ID (Likely to change): 9d4ef5ebed8a94aaaa9d96fb0aa587873b95695f

PatchWorks
http://patchwork.kernel.org/patch/90960/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=9d4ef5ebed8a94aaaa9d96fb0aa587873b95695f

maintainer
#8 lore raw

PATCH 1/6 omap4: Fix build break when used with gcc-4.4.1

In reply to Santosh Shilimkar

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: omap-fixes

Initial commit ID (Likely to change): e6680749bbb3905c7707163e095403542126b147

PatchWorks
http://patchwork.kernel.org/patch/90964/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=e6680749bbb3905c7707163e095403542126b147

maintainer
#9 lore raw
In reply to Santosh Shilimkar
Quoted 8 lines · Santosh Shilimkar

This series mainly adds I2C board data for OMAP4430 SDP and few needed fixes. I have made this into one series just for simplcity otherwise couple patches are independent. The intent is to get it merged in linux-omap master for testing. The needed I2C driver support is already merged in l-o master

It's generated against latest linux-omap master and tested with omap4430 and omap3430 sdps with regular and multi-omap defconfig

Santosh, can you please repost one more time the remaining patches refreshed against the current omap for-next branch? Patches 4 - 6 need to be refreshed to apply.

Thanks,

Tony

author
#10 lore raw
Quoted 14 lines

-----Original Message-----
From: Tony Lindgren [mailto:[email protected]]
Sent: Wednesday, May 12, 2010 5:48 AM
To: Shilimkar, Santosh
Cc: [email protected]
Subject: Re: [PATCH 0/6] omap4 i2c board support and fixes

Quoted 6 lines · Santosh Shilimkar

This series mainly adds I2C board data for OMAP4430 SDP and few needed fixes. I have made this into one series just for simplcity otherwise couple patches are independent. The intent is to get it merged in linux-omap master for testing. The needed I2C driver support is already merged in l-o master

Quoted 6 lines
Quoted 2 lines

It's generated against latest linux-omap master and tested with omap4430 and omap3430 sdps with regular and multi-omap defconfig

Santosh, can you please repost one more time the remaining patches refreshed against the current omap for-next branch? Patches 4 - 6 need to be refreshed to apply.

Sure Tony!!

Regards,
Santosh