omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH
Subsystems (2)
PATCH 1/1 omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH
Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression.
Created and tested againts linux-2.6.34-rc3.
Applicable to 2.6.33-stable as well.
---
arch/arm/plat-omap/gpio.c renamed from arch/arm/plat-omap/gpio.c.orig +3 -3
@@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gcase METHOD_MPUIO : reg +=OMAP_MPUIO_GPIO_INT_EDGE ; l =__raw_readl (reg); -if (trigger &IRQ_TYPE_EDGE_BOTH ) +if ((trigger &IRQ_TYPE_SENSE_MASK ) ==IRQ_TYPE_EDGE_BOTH ) bank->toggle_mask |=1 << gpio;if (trigger &IRQ_TYPE_EDGE_RISING ) l |=1 << gpio;
@@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gcase METHOD_GPIO_1510 : reg +=OMAP1510_GPIO_INT_CONTROL ; l =__raw_readl (reg); -if (trigger &IRQ_TYPE_EDGE_BOTH ) +if ((trigger &IRQ_TYPE_SENSE_MASK ) ==IRQ_TYPE_EDGE_BOTH ) bank->toggle_mask |=1 << gpio;if (trigger &IRQ_TYPE_EDGE_RISING ) l |=1 << gpio;
@@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gcase METHOD_GPIO_7XX : reg +=OMAP7XX_GPIO_INT_CONTROL ; l =__raw_readl (reg); -if (trigger &IRQ_TYPE_EDGE_BOTH ) +if ((trigger &IRQ_TYPE_SENSE_MASK ) ==IRQ_TYPE_EDGE_BOTH ) bank->toggle_mask |=1 << gpio;if (trigger &IRQ_TYPE_EDGE_RISING ) l |=1 << gpio;
PATCH 1/1 omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: omap-fixes
Initial commit ID (Likely to change): 540428607511ef4bc96dda5f270a3cbad2a3f57c
PatchWorks
http://patchwork.kernel.org/patch/90615/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=540428607511ef4bc96dda5f270a3cbad2a3f57c