Skip to contentSkip to conversation

Add OHCI USB platform init

PATCH New Viral Mehta 2 participants 2 messages Apr 16, 2010 – May 5, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Add OHCI USB platform init

From: Viral Mehta <[email protected]>

Add platform init code for OHCI USB on OMAP2430 SDP

---
One more effort,
V2: no mangling between tabs and spaces, hopefully :)

 arch/arm/mach-omap2/board-2430sdp.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-omap2/board-2430sdp.c
index 346e1d2..047d5ae 100644

arch/arm/mach-omap2/board-2430sdp.c +10 -0
@@ -206,6 +206,15 @@ static struct omap_musb_board_data musb_board_data = {
 	.mode			= MUSB_OTG,
 	.power			= 100,
 };
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+	.otg		= 1,
+#ifdef  CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 0x0,
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	.hmc_mode	= 0x1,
+#endif
+	.pins[0]	= 3,
+}
 
 static void __init omap_2430sdp_init(void)
 {
@@ -216,6 +225,7 @@ static void __init omap_2430sdp_init(void)
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
+	omap_usb_init(&sdp2430_usb_config);
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 
Signature · 1 line
1.6.6
maintainer
#1 lore raw

PATCH v2 1/1 Add OHCI USB platform init

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: for-next

Initial commit ID (Likely to change): 397794b0aa2844dd98a2c527cb7a23ae059f2b24

PatchWorks
http://patchwork.kernel.org/patch/93049/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=397794b0aa2844dd98a2c527cb7a23ae059f2b24