Skip to contentSkip to conversation

omap4: mmc: Fix the regulator resource for MMC2

PATCH In review Santosh Shilimkar 2 participants 4 messages May 28, 2010 – Jul 6, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 omap4: mmc: Fix the regulator resource for MMC2

The MMC1 and MMC2 cards have seperate LDO supplies. Current code assumes that they are powered by same LDO.

This patch fixes the same and has VAUX1 as supply to MMC2 card.

---
Tested with omap3_defconfig on OMAP4430SDP

 arch/arm/mach-omap2/board-4430sdp.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)
arch/arm/mach-omap2/board-4430sdp.c +8 -4
index 7a78986..f62042e 100644
@@ -384,14 +384,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -447,6 +449,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -487,7 +491,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
Signature · 1 line
1.6.0.4
#1 lore raw

Tony,

Quoted 12 lines

-----Original Message-----
From: Shilimkar, Santosh
Sent: Friday, May 28, 2010 9:38 PM
To: [email protected]
Cc: Shilimkar, Santosh; Nayak, Rajendra; Ghorai, Sukumar; Kadiyala, Kishore
Subject: [PATCH] omap4: mmc: Fix the regulator resource for MMC2

The MMC1 and MMC2 cards have seperate LDO supplies. Current code assumes that they are powered by same LDO.

This patch fixes the same and has VAUX1 as supply to MMC2 card.

Quoted 8 lines

---
Tested with omap3_defconfig on OMAP4430SDP

Any comments on this one ??

Quoted 47 lines
 arch/arm/mach-omap2/board-4430sdp.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)
arch/arm/mach-omap2/board-4430sdp.c +8 -5
index 7a78986..f62042e 100644
@@ -384,14 +384,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -447,6 +449,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -487,7 +491,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
--

1.6.0.4

#2 lore raw

ping

Quoted 79 lines

-----Original Message-----
From: Shilimkar, Santosh
Sent: Thursday, June 10, 2010 9:05 PM
To: Shilimkar, Santosh; [email protected]
Cc: Nayak, Rajendra; Ghorai, Sukumar; Kadiyala, Kishore
Subject: RE: [PATCH] omap4: mmc: Fix the regulator resource for MMC2

Tony,

Quoted 5 lines

-----Original Message-----
From: Shilimkar, Santosh
Sent: Friday, May 28, 2010 9:38 PM
To: [email protected]
Cc: Shilimkar, Santosh; Nayak, Rajendra; Ghorai, Sukumar; Kadiyala,

Kishore

Quoted 7 lines

Subject: [PATCH] omap4: mmc: Fix the regulator resource for MMC2

The MMC1 and MMC2 cards have seperate LDO supplies. Current code assumes that they are powered by same LDO.

This patch fixes the same and has VAUX1 as supply to MMC2 card.

Quoted 8 lines

---
Tested with omap3_defconfig on OMAP4430SDP

Any comments on this one ??

arch/arm/mach-

Quoted 4 lines
 arch/arm/mach-omap2/board-4430sdp.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)
arch/arm/mach- renamed from arch/arm/mach-omap2/board-4430sdp.c +0 -0

omap2/board-4430sdp.c

Quoted 43 lines

index 7a78986..f62042e 100644

arch/arm/mach-omap2/board-4430sdp.c +8 -5
@@ -384,14 +384,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -447,6 +449,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -487,7 +491,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
--

1.6.0.4

maintainer
#3 lore raw

PATCH 1/1 omap4: mmc: Fix the regulator resource for MMC2

In reply to Santosh Shilimkar

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: devel-boards

Initial commit ID (Likely to change): 4b78f83d08ecac0c9b7aa1ee72345be4657abcb9

PatchWorks
http://patchwork.kernel.org/patch/102918/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=4b78f83d08ecac0c9b7aa1ee72345be4657abcb9