Skip to contentSkip to conversation

"multifunc-device": fix IRQ assignment by also scanning dummy nodes

PATCH New Tom Arbuckle 1 participant 1 message Feb 11, 2009 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 "multifunc-device": fix IRQ assignment by also scanning dummy nodes

Hello, Ben.

I've regenerated this patch against 2.6.28.4.

______

Kernel: 2.6.28.4; function: scan_OF_pci_childs; file: arch/powerpc/kernel/pci_32.c Quoting from line 206 : 'some OFs create a parent node "multifunc-device" as a fake root for all functions of a multi-function device. we go down them as well.'

Function scan_OF_for_pci_dev (line 225) also needs to be taught about these dummy nodes to prevent misallocation/non-allocation of IRQs for this class of devices.

Bug seen when using a bt878 multimedia controller card on a G3 Powermac. This PCI card has separate audio and video nodes and was not being properly assigned interrupts. (Either 'cannot grab irq 0' or type of assigned interrupt wrt 'edge/level' was incorrect).

Signed off by: Tom Arbuckle <tom.d.arbuckle (at) gmail.com>

______

Regards,

Tom Arbuckle

Homepage: http://www.ece.ul.ie/homepage/Tom_Arbuckle/
LinkedIn: http://www.linkedin.com/in/tomarbuckle

arch/powerpc/kernel/pci_32.c 2009-02-07 16:37:04.000000000 +0000 renamed from arch/powerpc/kernel/pci_32.c.orig 2009-02-06 21:47:45.000000000 +0000 +10 -4
@@ -226,15 +226,21 @@ static struct device_node *scan_OF_for_p
                                               unsigned int devfn)
 {
        struct device_node *np;
+       struct device_node *np_sub = NULL;
        const u32 *reg;
        unsigned int psize;
 
        for_each_child_of_node(parent, np) {
                reg = of_get_property(np, "reg", &psize);
-               if (reg == NULL || psize < 4)
-                       continue;
-               if (((reg[0] >> 8) & 0xff) == devfn)
-                       return np;
+               if (reg && psize >= 4) {
+                       if (((reg[0] >> 8) & 0xff) == devfn)
+                               return np;
+               }
+               if (!strcmp(np->name, "multifunc-device")) {
+                       np_sub = scan_OF_for_pci_dev(np, devfn);
+                       if (np_sub)
+                               return np_sub;
+               }
        }
        return NULL;
 }