Skip to contentSkip to conversation

add fcgi-2.4.0 package to buildroot

Buildroot Rico Bachmann 3 participants 13 messages Sep 16, 2011 – Sep 28, 2011

lore
Share & tools
lore
#0 lore raw

Hi at all

I'm trying to add the fcgi-2.4.0 package to buildroot. I'm new in doing this.

For my advantage this package works already with automake/autoconfig.

I added the package with the help from this side:
http://buildroot.uclibc.org/buildroot.html#autotools-tutorial

Here is my libfcgi.mk file:

############################################################################
##

                #

                # libfcgi

                #

                # makefile for automake/autoconf by Rico Bachmann

                #

############################################################################
##

                LIBFCGI_VERSION = 2.4.0

                LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz

                LIBFCGI_SITE = http://www.fastcgi.com/dist

                LIBFCGI_INSTALL_STAGING = YES

                LIBFCGI_INSTALL_TARGET= YES

                LIBFCGI_CONF_OPT = --enable-shared

$(eval $(call AUTOTARGETS,package,libfcgi))

and here is my Config.in file:

config BR2_PACKAGE_LIBFCGI

bool "libfcgi"

help

This is a fcgi developer
librarz to use in C.

                                               http://www.fastcgi.com/

My problem is if i try to build my rootfs with this packag, i got some errors, and i don't see how to fix them.

Here is my output from the make (the last lines):

Making all in cgi-fcgi

make[3]: Entering directory
`/mnt/clfs/buildroot-2011.08/output/build/libfcgi-2.4.0/cgi-fcgi'

                source='cgi-fcgi.c' object='cgi-fcgi.o' libtool=no \

                                depfile='.deps/cgi-fcgi.Po'

tmpdepfile='.deps/cgi-fcgi.TPo' \

                                depmode=gcc3 /bin/sh ../depcomp \

/mnt/clfs/buildroot-2011.08/output/host/usr/bin/arm-unknown-linux-uclibcgnue
abi-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -pipe -Os -Wall -c
test -f cgi-fcgi.c || echo './'cgi-fcgi.c

                /bin/sh ../libtool --mode=link

/mnt/clfs/buildroot-2011.08/output/host/usr/bin/arm-unknown-linux-uclibcgnue
abi-gcc -pipe -Os -Wall -o cgi-fcgi cgi-fcgi.o ../libfcgi/libfcgi.la
-lnsl

mkdir .libs

/mnt/clfs/buildroot-2011.08/output/host/usr/bin/arm-unknown-linux-uclibcgnue abi-gcc -pipe -Os -Wall -o .libs/cgi-fcgi cgi-fcgi.o ../libfcgi/.libs/libfcgi.so -lnsl

../libfcgi/.libs/libfcgi.so: warning: gethostbyname is
obsolescent, use getnameinfo() instead.

../libfcgi/.libs/libfcgi.so: undefined reference to `frexp'

collect2: ld returned 1 exit status

make[3]: *** [cgi-fcgi] Fehler 1

make[3]: Leaving directory
`/mnt/clfs/buildroot-2011.08/output/build/libfcgi-2.4.0/cgi-fcgi'

make[2]: *** [all-recursive] Fehler 1

make[2]: Leaving directory
`/mnt/clfs/buildroot-2011.08/output/build/libfcgi-2.4.0'

make[1]: *** [all] Fehler 2

make[1]: Leaving directory
`/mnt/clfs/buildroot-2011.08/output/build/libfcgi-2.4.0'

                make: ***

[/mnt/clfs/buildroot-2011.08/output/build/libfcgi-2.4.0/.stamp_built] Fehler 2

if it would help i can upload the hole output from make.

I see that i need the 'frexp' but how do i link this? If I'm not wrong, thats a function of math.h
And are there some other errors i don't see myself? I'm happy about every hint.

greez bluefire

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20110916/8713a057/attachment-0001.html>

#1 lore raw

Hello,

The global formatting of your e-mail is terrible. You should fix your e-mail client.

Le Fri, 16 Sep 2011 17:33:47 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 5 lines

LIBFCGI_VERSION = 2.4.0 LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz LIBFCGI_SITE = http://www.fastcgi.com/dist
LIBFCGI_INSTALL_STAGING = YES LIBFCGI_INSTALL_TARGET= YES

This last line is not needed.

Quoted 1 line
                LIBFCGI_CONF_OPT = --enable-shared

This is not needed.

Quoted 9 lines

/mnt/clfs/buildroot-2011.08/output/host/usr/bin/arm-unknown-linux-uclibcgnue abi-gcc -pipe -Os -Wall -o .libs/cgi-fcgi cgi-fcgi.o ../libfcgi/.libs/libfcgi.so -lnsl

../libfcgi/.libs/libfcgi.so: warning: gethostbyname is
obsolescent, use getnameinfo() instead.

../libfcgi/.libs/libfcgi.so: undefined reference to
`frexp'

Looks like it forgets to link against the math library, i.e -lm is missing from the link command line. Probably something not completely correct in fcgi build system.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#2 lore raw
Quoted 21 lines

-----Urspr?ngliche Nachricht-----
Von: Thomas Petazzoni [mailto:thomas.petazzoni at free-electrons.com]
Gesendet: Freitag, 16. September 2011 18:44
An: buildroot at busybox.net
Cc: bachmann at tofwerk.com
Betreff: Re: [Buildroot] add fcgi-2.4.0 package to buildroot

Hello,

The global formatting of your e-mail is terrible. You should fix your e-mail client.

Le Fri, 16 Sep 2011 17:33:47 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 5 lines

LIBFCGI_VERSION = 2.4.0 LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz LIBFCGI_SITE = http://www.fastcgi.com/dist
LIBFCGI_INSTALL_STAGING = YES LIBFCGI_INSTALL_TARGET= YES

Quoted 5 lines

This last line is not needed.

Quoted 1 line
                LIBFCGI_CONF_OPT = --enable-shared

This is not needed.

I've deleted this 2 lines.

Quoted 17 lines
Quoted 2 lines

/mnt/clfs/buildroot-2011.08/output/host/usr/bin/arm-unknown-linux-

uclibcgnue

Quoted 4 lines

abi-gcc -pipe -Os -Wall -o .libs/cgi-fcgi cgi-fcgi.o ../libfcgi/.libs/libfcgi.so -lnsl

../libfcgi/.libs/libfcgi.so: warning: gethostbyname

is

Quoted 4 lines

obsolescent, use getnameinfo() instead.

../libfcgi/.libs/libfcgi.so: undefined reference to
`frexp'

Looks like it forgets to link against the math library, i.e -lm is missing from the link command line. Probably something not completely correct in fcgi build system.

Quoted 8 lines

Regards,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux development, consulting, training and support.
http://free-electrons.com

If I see this right, I have to patch the buildsystem from the original fcgi package? Then I could add the link to the math library and add the -lm to the command? Is that the right way to go? Or didn't I understood you right?

I'm now try to understand the automake files of the fcgi.

Greetings Bluefire

Mit freundlichen Gr?ssen

Tofwerk AG, Rico Bachmann

+41 33 511 11 69
bachmann at tofwerk.com
http://www.tofwerk.com
Uttigenstrasse 22
CH - 3600 Thun

#3 lore raw

Le Mon, 19 Sep 2011 16:14:45 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 2 lines

If I see this right, I have to patch the buildsystem from the original fcgi package?

Yes, probably. Or sometimes a workaround can be done in the package .mk file. It depends on what the workaround is :)

Quoted 5 lines

Then I could add the link to the math library
and add the -lm to the command? Is that the right way to go? Or didn't I understood you right?

I'm now try to understand the automake files of the fcgi.

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 8 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Thanks!

Thomas

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

#5 lore raw

Am 21.09.2011, 11:29 Uhr, schrieb Rico Bachmann
<[email protected]>:

Quoted 7 lines

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 5 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Quoted 6 lines
Quoted 3 lines

Thanks!

Thomas

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email. I hope it's not totaly screwed up.

How can i use the patch automatically in buildroot?
it should patch the make files from the libfcgi package after extracting them from the tarball.
At the moment I run make, wait for the error, patch the files, run make again...
I think i have to add some commands in the libfcgi.mk file.

And should I commit my integration of libfcgi to the buildroot project? Maybe there are other people that like to compile some fcgi applications directly on the embedded system.

Greez
Rico
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fcgiex.patch
Type: application/octet-stream
Size: 419 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20110928/d83722e9/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fcgicf.patch
Type: application/octet-stream
Size: 393 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20110928/d83722e9/attachment-0001.obj>

#6 lore raw
Quoted 14 lines · Rico Bachmann

Am 21.09.2011, 11:29 Uhr, schrieb Rico Bachmann
<[email protected]>:

Quoted 11 lines

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 8 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Thanks!

Thomas

Quoted 9 lines
Quoted 2 lines

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email.
I hope it's not totaly screwed up.

You might want to check the contents of the patch files attached to your post. ;-)

Unless you intended to send two, one-line, patches - something is missing from each.

Mike

Quoted 14 lines

How can i use the patch automatically in buildroot?
it should patch the make files from the libfcgi package after extracting them from the tarball.
At the moment I run make, wait for the error, patch the files, run make again...
I think i have to add some commands in the libfcgi.mk file.

And should I commit my integration of libfcgi to the buildroot project? Maybe there are other people that like to compile some fcgi applications directly on the embedded system.

Greez
Rico

#7 lore raw

Am 28.09.2011, 13:03 Uhr, schrieb Michael S. Zick
<[email protected]>:

Quoted 25 lines · Rico Bachmann
Quoted 14 lines

Am 21.09.2011, 11:29 Uhr, schrieb Rico Bachmann
<[email protected]>:

Quoted 11 lines

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 8 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Thanks!

Thomas

Quoted 9 lines
Quoted 2 lines

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email.
I hope it's not totaly screwed up.

Quoted 7 lines

You might want to check the contents of the patch files attached to your post. ;-)

Unless you intended to send two, one-line, patches - something is missing from each.

Mike

I created the patches with this command:

diff -u path/originalfile path/newfile > mypatch.patch

there should be everything needed in the file content.
at least they're working fine for me, i can use the patches wih this command:

patch p0 -i mypatch.patch

and it is only one-line per patch i have to change.
It's the missing link to the math library by the LDFLAGS which wasn't set.

Rico

Quoted 14 lines
Quoted 14 lines

How can i use the patch automatically in buildroot?
it should patch the make files from the libfcgi package after extracting them from the tarball.
At the moment I run make, wait for the error, patch the files, run make again...
I think i have to add some commands in the libfcgi.mk file.

And should I commit my integration of libfcgi to the buildroot project? Maybe there are other people that like to compile some fcgi applications directly on the embedded system.

Greez
Rico

#8 lore raw
Quoted 40 lines · Rico Bachmann

Am 28.09.2011, 13:03 Uhr, schrieb Michael S. Zick
<[email protected]>:

Quoted 25 lines · Rico Bachmann
Quoted 14 lines

Am 21.09.2011, 11:29 Uhr, schrieb Rico Bachmann
<[email protected]>:

Quoted 11 lines

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 8 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test and help you in fixing the problem?

Thanks!

Thomas

Quoted 9 lines
Quoted 2 lines

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email.
I hope it's not totaly screwed up.

Quoted 7 lines

You might want to check the contents of the patch files attached to your post. ;-)

Unless you intended to send two, one-line, patches - something is missing from each.

Mike

I created the patches with this command:

diff -u path/originalfile path/newfile > mypatch.patch

Quoted 9 lines

there should be everything needed in the file content.
at least they're working fine for me, i can use the patches wih this command:

patch p0 -i mypatch.patch

and it is only one-line per patch i have to change.
It's the missing link to the math library by the LDFLAGS which wasn't set.

My bad, I thought the patches where the topic line of this thread.

Thread topic reads: "add fcgi-2.4.0 package..."
Not: "correct fcgi-2.4.0 package..."

I will have to re-read the topic thread to see where it got hijacked.

Mike

Quoted 23 lines

Rico

Quoted 8 lines
Quoted 8 lines

How can i use the patch automatically in buildroot?
it should patch the make files from the libfcgi package after extracting them from the tarball.
At the moment I run make, wait for the error, patch the files, run make again...
I think i have to add some commands in the libfcgi.mk file.

Quoted 6 lines
Quoted 6 lines

And should I commit my integration of libfcgi to the buildroot project? Maybe there are other people that like to compile some fcgi applications directly on the embedded system.

Greez
Rico

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#9 lore raw

Am 28.09.2011, 13:33 Uhr, schrieb Michael S. Zick
<[email protected]>:

Quoted 55 lines · Rico Bachmann
Quoted 47 lines

Am 28.09.2011, 13:03 Uhr, schrieb Michael S. Zick
<[email protected]>:

Quoted 6 lines · Rico Bachmann
Quoted 5 lines

Am 21.09.2011, 11:29 Uhr, schrieb Rico Bachmann <[email protected]>:

Quoted 2 lines

Am 19.09.2011, 22:46 Uhr, schrieb Thomas Petazzoni

<[email protected]>:

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Can you post a proper patch (sent with git send-email so that it doesn't get screwed up by your e-mail client) so that we can test

and

Quoted 10 lines
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines

help you in fixing the problem?

Thanks!

Thomas

As soon as I've done a proper patch, i will send it. But I could use a moment. I'm really a newbie in that section

Is there a good tutorial to use git send-email, at the moment i have

a

Quoted 6 lines
Quoted 5 lines

patch
that allows me to build my rootfs with the libfcgi. I attached the patches without git send-email. I hope it's not totaly screwed up.

Quoted 7 lines

You might want to check the contents of the patch files attached to your post. ;-)

Unless you intended to send two, one-line, patches - something is missing from each.

Mike

I created the patches with this command:

diff -u path/originalfile path/newfile > mypatch.patch

there should be everything needed in the file content.
at least they're working fine for me, i can use the patches wih this command:

Quoted 6 lines

patch p0 -i mypatch.patch

and it is only one-line per patch i have to change.
It's the missing link to the math library by the LDFLAGS which wasn't set.

Quoted 8 lines

My bad, I thought the patches where the topic line of this thread.

Thread topic reads: "add fcgi-2.4.0 package..."
Not: "correct fcgi-2.4.0 package..."

I will have to re-read the topic thread to see where it got hijacked.

Mike

If I manage my two patches to automatically run from buildroot I can create and upload a patchfile which add the hole package. But at this moment i don't really know how to do that. Because I am new to the buildroot developing.

Quoted 27 lines
Quoted 27 lines

Rico

Quoted 3 lines
Quoted 3 lines

How can i use the patch automatically in buildroot? it should patch the make files from the libfcgi package after

extracting

Quoted 2 lines
Quoted 2 lines

them from the tarball.
At the moment I run make, wait for the error, patch the files, run

make

Quoted 4 lines
Quoted 4 lines

again...
I think i have to add some commands in the libfcgi.mk file.

And should I commit my integration of libfcgi to the buildroot

project?

Quoted 1 line
Quoted 1 line

Maybe there are other people that like to compile some fcgi

applications

Quoted 4 lines
Quoted 4 lines

directly on the embedded system.

Greez
Rico

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 1 line
Erstellt mit Operas revolution?rem E-Mail-Modul: http://www.opera.com/mail/
#10 lore raw
In reply to Rico Bachmann

Le Wed, 28 Sep 2011 12:18:51 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 5 lines

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email. I hope it's not totaly screwed up.

You can read
http://lists.busybox.net/pipermail/buildroot/2010-December/039181.html
for a very basic introduction on how to contribute to Buildroot using git.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#11 lore raw

Am 28.09.2011, 14:16 Uhr, schrieb Thomas Petazzoni <[email protected]>:

Quoted 9 lines

Le Wed, 28 Sep 2011 12:18:51 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 5 lines

Is there a good tutorial to use git send-email, at the moment i have a patch
that allows me to build my rootfs with the libfcgi.
I attached the patches without git send-email. I hope it's not totaly screwed up.

Quoted 8 lines

You can read
http://lists.busybox.net/pipermail/buildroot/2010-December/039181.html
for a very basic introduction on how to contribute to Buildroot using git.

Regards,

Thomas

I'm now working with this link.
But I'm stock at this point:

after I did this cmd:

git format-patch HEAD

i try to do this cmd:

  git send-email --to buildroot at uclibc.org --compose *.patch

the problem is, after git format-patch HEAD, i can't find any created patch!

#12 lore raw

Le Wed, 28 Sep 2011 15:36:15 +0200,
"Rico Bachmann" <[email protected]> a ?crit :

Quoted 3 lines

after I did this cmd:

git format-patch HEAD

That line is wrong, you should do:

git format-patch master

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com