AT49BV322A Flash: the erase regions are in the wrong order.
PATCH v2 1/1 AT49BV322A Flash: the erase regions are in the wrong order.
The device id for this Flash is 0xc8.
--- drivers/mtd/cfi_flash.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
drivers/mtd/cfi_flash.c +0 -0
@@ -1690,8 +1690,10 @@ static void flash_fixup_atmel(flash_info_t *info,
struct cfi_qry *qry)
/* AT49BV6416(T) list the erase regions in the wrong order.
* However, the device ID is identical with the non-broken
* AT49BV642D they differ in the high byte.
+ * AT49BV322A is also in the wrong order.
*/
- if (info->device_id == 0xd6 || info->device_id == 0xd2) + if (info->device_id == 0xd6 || info->device_id == 0xd2 ||
+ info->device_id == 0xc8)
reverse_geometry = !reverse_geometry;
if (reverse_geometry)
Signature · 1 line
1.5.6
PATCH v2 1/1 AT49BV322A Flash: the erase regions are in the wrong order.
drivers/mtd/cfi_flash.c static void flash_fixup_atmel(flash_info_t *info, · line 1690
Quoted 13 lines · On Tuesday 13 April 2010 18:34:00 David Wu wrote:
The device id for this Flash is 0xc8.Signed-off-by David Wu <[email protected]>--- drivers/mtd/cfi_flash.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)drivers/mtd/cfi_flash.c +0
-0@@ -1690,8 +1690,10 @@ static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
!!!!!!!!!!!!!!!!!!
Sill line wrapped. I could fix this here, but since your other patches are also line wrapped you need to fix your mailer setup anyway. Best would be to send via "git send-email". If this is not possible, take a look at this for correct mail client setup for sending patches:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/email-
clients.txt;h=945ff3fda4337b089515dfced483fee7b941edcf;hb=HEAD
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de