Skip to contentSkip to conversation

ARM: mvebu: Correct unit address for linksys

PATCH New Patrick Uiterwijk 3 participants 3 messages Mar 29, 2016 – Mar 30, 2016 Device tree bindings

lore
Share & tools
lore

Patrick Uiterwijk

author
#0 lore raw

PATCH v2 1/1 ARM: mvebu: Correct unit address for linksys

The USB2 port for Armada 38x is defined to be at 58000, not at 50000.

Signed-off-by Patrick Uiterwijk <[email protected]>
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/armada-385-linksys.dtsi +1 -1
index 3710755..85d2c37 100644
@@ -117,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb at 50000 {
+			usb at 58000 {
 				status = "okay";
 			};
Signature · 1 line
2.7.4
#1 lore raw

PATCH v2 1/1 ARM: mvebu: Correct unit address for linksys

Right, a165c3b63b6f24fdc47c270db5f8b1a48b69c1b6 was merged sooner then this board setup file.

Acked-by Imre Kaloz <[email protected]>
Quoted 20 lines · Patrick Uiterwijk

The USB2 port for Armada 38x is defined to be at 58000, not at 50000.

Signed-off-by Patrick Uiterwijk <[email protected]>
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/armada-385-linksys.dtsi +1 -1
index 3710755..85d2c37 100644
@@ -117,7 +117,7 @@
 			};
 			/* USB part of the eSATA/USB 2.0 port */
-			usb at 50000 {
+			usb at 58000 {
 				status = "okay";
 			};
#2 lore raw

PATCH v2 1/1 ARM: mvebu: Correct unit address for linksys

Hi Patrick,

Quoted 4 lines · Imre Kaloz

Right, a165c3b63b6f24fdc47c270db5f8b1a48b69c1b6 was merged sooner then this board setup file.

Acked-by Imre Kaloz <[email protected]>

Applied on mvebu/fixes. I also added the following flags to the commit:

Cc <[email protected]>
Fixes 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices")

as well as the acked-by from Imre.

Thanks,

Gregory

Quoted 24 lines
Quoted 20 lines · Patrick Uiterwijk

The USB2 port for Armada 38x is defined to be at 58000, not at 50000.

Signed-off-by Patrick Uiterwijk <[email protected]>
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/armada-385-linksys.dtsi +1 -1
index 3710755..85d2c37 100644
@@ -117,7 +117,7 @@
 			};
 			/* USB part of the eSATA/USB 2.0 port */
-			usb at 50000 {
+			usb at 58000 {
 				status = "okay";
 			};
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com