How do I stop make building all modules after reboot?
Quick question as above. I'm building an i2c module. If I don't reboot the machine "make modules" works as expected and just recompiles my changes.
After a reboot I have to wait 1 hour + (two smp P3 866s) while all modules are built. I've had a look in the Makefile but can't spot the dependancy. TIA
Bill
Quoted 5 lines · Bill Adair
Quick question as above. I'm building an i2c module. If I don't reboot the machine "make modules" works as expected and just recompiles my changes.
After a reboot I have to wait 1 hour + (two smp P3 866s) while all modules are built. I've had a look in theMakefilebut can't spot the dependancy.
Something fishy going on here.
Maybe your clock are set backwards when rebooting?
Sam
Keyboard and mouse interfere in 2.6
Hi, is there any way the input from the keyboard can interfere with the input from the mouse? Because they are interfering, on my computer. If I hold ctrl, the mouse jumps randomly about if I try to move it. And then the ctrl key gets stuck in the 'on' position until I rapidly tap it to somehow get it reset.
The same occurs for the shift key, which is very disturbing as it opens every possible right-click menu on my GUI.
It's not the video card: I've used 2 different cards since the problem started. It's not the sound card either, as I have used 2 different sound cards as well. The problem started when I switched from 2.4 to 2.6, and seems confined entirely to the keyboard and mouse drivers.
I have a USB mouse, and a PS/2 keyboard; both worked perfectly before 2.6. I run fvwm, and a recent compile of X.org. Video driver is "S3 Savage4" or a proprietary Nvidia one, take your pick. (The Nvidia card went and broke on me, S3 is on-board.)
I don't think quoting the whole .config would be appreciated, but here's what seemed like it would be relavent. Is there any setting I might have not properly applied?
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
CONFIG_USB=mCONFIG_USB_DEBUG=yCONFIG_USB_DEVICEFS=y
CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=y
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set