Problems building U-Boot for x86_64
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
My host is x86_64, the target is core2 with tune=core-64.
Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux), and multilib does not add libgcc.a to that sysroot.
So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux- gcc ......
So TARGET_PREFIX resolves to x86_64-poky-linux, but I think my target is core2_64 (or something like that). Is that normal for U-Boot?
I am a little lost, so any help would be greatly appreciated!
Ferry
Quoted 10 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
Quoted 16 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux), and multilib does not add libgcc.a to that sysroot.
So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
Quoted 6 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?
thats ok.
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
Quoted 7 lines · Khem Raj
Quoted 6 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -m elf_i386 --emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext 0x01101000 -o u-boot -T u-boot.lds arch/x86/cpu/start.o --start-group arch/x86/cpu/built-in.o arch/x86/lib/built-in.o board/intel/edison/built-in.o cmd/built-in.o common/built-in.o disk/built-in.o drivers/built-in.o drivers/dma/built-in.o drivers/gpio/built-in.o drivers/i2c/built-in.o drivers/mmc/built-in.o drivers/mtd/built-in.o drivers/mtd/onenand/built-in.o drivers/mtd/spi/built- in.o drivers/net/built-in.o drivers/net/phy/built-in.o drivers/pci/built- in.o drivers/power/built-in.o drivers/power/battery/built-in.o drivers/power/domain/built-in.o drivers/power/fuel_gauge/built-in.o drivers/power/mfd/built-in.o drivers/power/pmic/built-in.o drivers/power/regulator/built-in.o drivers/serial/built-in.o drivers/spi/built-in.o drivers/usb/common/built-in.o drivers/usb/dwc3/built- in.o drivers/usb/emul/built-in.o drivers/usb/eth/built-in.o drivers/usb/gadget/built-in.o drivers/usb/gadget/udc/built-in.o drivers/usb/host/built-in.o drivers/usb/musb-new/built-in.o drivers/usb/musb/built-in.o drivers/usb/phy/built-in.o drivers/usb/ulpi/built-in.o dts/built-in.o fs/built-in.o lib/built-in.o net/built-in.o test/built-in.o test/dm/built-in.o --end-group arch/x86/lib/lib.a -Map u-boot.map
ERROR: oe_runmake failedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison- morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03- r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'
Quoted 32 lines
Quoted 16 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux), and multilib does not add libgcc.a to that sysroot.
So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 6 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
Quoted 37 lines · Ferry Toth
Quoted 7 lines · Khem Raj
Quoted 6 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.o
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'
I as believe the missing lib is libgcc.a I just my sysroot and found it here:
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make
-j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison
V=1
HOSTCC=gcc
-isystem/..../sysroots/x86_64-linux/usr/include
-O2 -pipe
-L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib
-Wl,-O1
-C /..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build edison_defconfig
(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 35 lines
Quoted 26 lines
Quoted 16 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux), and multilib does not add libgcc.a to that sysroot.
So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 6 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 1 line
Quoted 6 lines
Quoted 4 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
Signature · 3 lines
Ferry Toth Oranje Plantage 35 Delft
Quoted 48 lines · Ferry Toth
Quoted 37 lines · Ferry Toth
Quoted 7 lines · Khem Raj
Quoted 6 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'
Quoted 2 lines
I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 65 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make
-j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison
V=1
HOSTCC=gcc(quoted diff) +0
-10-isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C /..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 35 lines
Quoted 26 lines
Quoted 16 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux), and multilib does not add libgcc.a to that sysroot.
So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 6 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 1 line
Quoted 6 lines
Quoted 4 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 41 lines · Ferry Toth
Quoted 40 lines
Quoted 38 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.o
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map
ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-
v2017.03-
Quoted 11 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
If change my setup to build for a 32bit target, it build u-boot without error.
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be:
make -j8 edison_defconfig
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 63 lines
Quoted 63 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc(quoted diff) +0
-6-isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 38 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 6 lines
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
Quoted 58 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 41 lines · Ferry Toth
Quoted 40 lines
Quoted 38 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map
ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 8 lines
Quoted 5 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be:
make -j8edison_defconfig
same is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to __normal___udivdi3
Quoted 71 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 63 lines
Quoted 63 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc(quoted diff) +0
-6-isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 38 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 6 lines
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 66 lines · Ferry Toth
Quoted 65 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 41 lines · Ferry Toth
Quoted 40 lines
Quoted 38 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3
I will do that tonight.
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 65 lines
Quoted 65 lines
Quoted 63 lines
Quoted 63 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe(quoted diff) +0
-6-L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 38 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 6 lines
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
Hi Ferry,
Quoted 85 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 66 lines · Ferry Toth
Quoted 65 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 41 lines · Ferry Toth
Quoted 40 lines
Quoted 38 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 65 lines
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 57 lines
Quoted 57 lines
Quoted 57 lines
Quoted 57 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe(quoted diff) +0
-6-L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 32 lines
Quoted 32 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 3 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned* solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issue is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile +3 -2
@@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/ extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a -NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC}
$(call if_changed,objcopy)
Signature · 11 lines
I hope this helps. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Op Thu, 24 Aug 2017 12:40:57 +0200, schreef Stefano Babic:
Quoted 152 lines
Hi Ferry,
Quoted 149 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 68 lines · Ferry Toth
Quoted 67 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 43 lines · Ferry Toth
Quoted 42 lines
Quoted 40 lines · Ferry Toth
Quoted 9 lines · Khem Raj
Quoted 8 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto.
Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-
in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 54 lines
Quoted 54 lines
Quoted 54 lines
Quoted 54 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 29 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned* solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issue
Alright then. But I didn't intend to build a 64 bit U-Boot. I intended to build a 64 bit image, which consists in the end of 3 binary image, U- Boot, Linux and rootfs. The bitness of U-Boot should not depend on either host or target bitness, it should only depend on the architectures requirements.
Quoted 8 lines
is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see
CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.
Still don't get this. When I build outside of Yocto on a 64 bit host, it just builds. U-Boot's make file already selects the correct target bitness and finds the correct libraries.
To me that sounds like that building inside Yocto should just work too, if I just get the configuration right.
And correct me if I'm wrong, to do that that I need to force Yocto to build 32 bit target, in case of U-Boot (lib32-u-boot?). Or override tune=core-64 for U-Boot only?
Still, when I build on my host outside of Yocto I don't need to do any of this. And the linker probably uses 32 bit copy of libgcc.a installed with multilib on my host.
Hence my question: Yocto has multilib, which in this case installs 32 bit libs into the targets sysroot. And I suspect I need to install 32 bit libs into the -native sysroot. How to do that? All the documentation I found are related to installing libs into the target image.
Quoted 2 lines
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
I think I saw something upstreamed related to this, I'd prefer to wait till that lands. But I will try to let Yocto apply a patch, instead of adding to my git.
Quoted 34 lines
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-0e17f0bb..62764ec 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/
extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-2-NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC)$(PLATFORM_CPPFLAGS)
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +2
-2-print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC} $(call if_changed,objcopy) --I hope this helps.
Best regards,
Stefano Babic--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
[email protected]
=====================================================================
Hi Ferry,
Quoted 162 lines · Ferry Toth
Op Thu, 24 Aug 2017 12:40:57 +0200, schreef Stefano Babic:
Quoted 152 lines
Hi Ferry,
Quoted 149 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 68 lines · Ferry Toth
Quoted 67 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 43 lines · Ferry Toth
Quoted 42 lines
Quoted 40 lines · Ferry Toth
Quoted 9 lines · Khem Raj
Quoted 8 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto.
Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-
in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 54 lines
Quoted 54 lines
Quoted 54 lines
Quoted 54 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 29 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned* solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issue
Quoted 5 lines
Alright then. But I didn't intend to build a 64 bit U-Boot. I intended to build a 64 bit image, which consists in the end of 3 binary image, U- Boot, Linux and rootfs. The bitness of U-Boot should not depend on either host or target bitness, it should only depend on the architectures requirements.
Right, but you cannot build a 64-bit U-Boot: it is unsupported. In fact, when U-Boot is built, gcc is called with -march=i386 -m32.
If you check any compiled file, you get a 32 bit object, even if you set tune=core-64.
Quoted 10 lines
Quoted 9 lines
is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see
CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.
Quoted 3 lines
Still don't get this. When I build outside of Yocto on a 64 bit host, it just builds. U-Boot's make file already selects the correct target bitness and finds the correct libraries.
Right, if you have multilib support. Then you have 32-bit version of libgcc.a
Quoted 2 lines
To me that sounds like that building inside Yocto should just work too, if I just get the configuration right.
You built for 64 bit - when the arch/x86/Makefile in U-Boot is called, it tries to find the library itself:
$(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name)
This always results in the 64bit version of the library built by Yocto. So you have all U-Boot objects built with "-m32" (32 bit objects) and it tries to link against 64 bit libgcc.
At least, this what I deducted from the errors...
Quoted 3 lines
And correct me if I'm wrong, to do that that I need to force Yocto to build 32 bit target, in case of U-Boot (lib32-u-boot?).
This is already done in U-Boot Makefiles. The architecture is overwritten because "m32" is set inside U-Boot Makefile (just for x86).
Quoted 6 lines
Or override
tune=core-64 for U-Boot only?Still, when I build on my host outside of Yocto I don't need to do any of this. And the linker probably uses 32 bit copy of libgcc.a installed with multilib on my host.
Absolutely right.
Quoted 5 lines
Hence my question: Yocto has multilib, which in this case installs 32 bit libs into the targets sysroot. And I suspect I need to install 32 bit libs into the -native sysroot. How to do that? All the documentation I found are related to installing libs into the target image.
I don't know - I have given up this way because it looks to me messy to have multilib just for getting libgcc.a to link u-boot.
Quoted 6 lines
Quoted 3 lines
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
I think I saw something upstreamed related to this, I'd prefer to wait till that lands.
I have not yet seen it, it looks I missed that fix.
Quoted 25 lines
But I will try to let Yocto apply a patch, instead of adding to my git.
Quoted 22 lines
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-0e17f0bb..62764ec 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/
extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-2-NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC)$(PLATFORM_CPPFLAGS)
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +2
-2-print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC} $(call if_changed,objcopy) --
Quoted 2 lines
Quoted 2 lines
I hope this helps.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Op Thu, 24 Aug 2017 17:48:55 +0200, schreef Stefano Babic:
Quoted 66 lines
Hi Ferry,
Quoted 63 lines · Ferry Toth
Op Thu, 24 Aug 2017 12:40:57 +0200, schreef Stefano Babic:
Quoted 61 lines
Hi Ferry,
Quoted 58 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 56 lines · Ferry Toth
Quoted 55 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 53 lines · Ferry Toth
Quoted 52 lines
Quoted 50 lines · Ferry Toth
Quoted 10 lines · Khem Raj
Quoted 9 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto.
Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-
in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/
edison-
Quoted 103 lines
Quoted 103 lines
Quoted 102 lines
Quoted 35 lines
Quoted 14 lines
Quoted 14 lines
v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 4 lines
Quoted 4 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
Quoted 62 lines
Quoted 4 lines
Quoted 4 lines
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 57 lines
Quoted 57 lines
Quoted 57 lines
Quoted 57 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 32 lines
Quoted 32 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 3 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned* solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issue
Quoted 8 lines
Quoted 5 lines
Alright then. But I didn't intend to build a 64 bit U-Boot. I intended to build a 64 bit image, which consists in the end of 3 binary image, U- Boot, Linux and rootfs. The bitness of U-Boot should not depend on either host or target bitness, it should only depend on the architectures requirements.
Right, but you cannot build a 64-bit U-Boot: it is unsupported. In fact, when U-Boot is built, gcc is called with -march=i386 -m32.
That is exactly as it should be.
Quoted 2 lines
If you check any compiled file, you get a 32 bit object, even if you set tune=core-64.
Exactly, but I will double check, just to see if there is something wrong with the recipe.
Quoted 20 lines
Quoted 10 lines
Quoted 9 lines
is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see
CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.Quoted 3 lines
Still don't get this. When I build outside of Yocto on a 64 bit host, it just builds. U-Boot's make file already selects the correct target bitness and finds the correct libraries.
Right, if you have multilib support. Then you have 32-bit version of libgcc.a
Quoted 2 lines
To me that sounds like that building inside Yocto should just work too, if I just get the configuration right.
Quoted 8 lines
You built for 64 bit - when the
arch/x86/Makefilein U-Boot is called, it tries to find the library itself:$(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name)
This always results in the 64bit version of the library built by Yocto. So you have all U-Boot objects built with "-m32" (32 bit objects) and it tries to link against 64 bit libgcc.
But that would also happens on the host platform (building outside Yocto) and it doesn't. The host does have multilib and in some genious way gcc finds the 32 bit lib and links against it.
Quoted 9 lines
At least, this what I deducted from the errors...
Quoted 2 lines
And correct me if I'm wrong, to do that that I need to force Yocto to build 32 bit target, in case of U-Boot (lib32-u-boot?).
This is already done in U-Boot Makefiles. The architecture is overwritten because "m32" is set inside U-Boot
Makefile(just for x86).
Quoted 7 lines
Quoted 5 lines
Or override tune=core-64 for U-Boot only?
Still, when I build on my host outside of Yocto I don't need to do any of this. And the linker probably uses 32 bit copy of libgcc.a installed with multilib on my host.
Absolutely right.
But the host platform is 64 bit, so that probably shows in $(PLATFORM_CPPFLAGS). Everything is built 32 bit due to U-Boot's m32 override. So how does it know where to find the 32 bit lib?
Quoted 9 lines
Quoted 6 lines
Hence my question: Yocto has multilib, which in this case installs 32 bit libs into the targets sysroot. And I suspect I need to install 32 bit libs into the -native sysroot. How to do that? All the documentation I found are related to installing libs into the target image.
I don't know - I have given up this way because it looks to me messy to have multilib just for getting libgcc.a to link u-boot.
The patch below is to find a 32 bit version of the library, put it somewhere and patch U-Boot to use that. That sounds way more messy than installing installing multilib into the -native envirnment.
Except I am not sure if that can be done.
I could try to build U-Boot in the sdk or target environment, as that has multilib, but probably the U-Boot image will then be misplaced.
I could also tell bitbake to use the host compiler and environment, but that then puts requirement on the hosts gcc alternatives and puts a requirement for multilib on the host actually being installed.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
Yes, as I understand now, it is not even possible to build U-Boot for x86 on an arm platform. Strange.
Quoted 42 lines
Quoted 2 lines
I think I saw something upstreamed related to this, I'd prefer to wait till that lands.
I have not yet seen it, it looks I missed that fix.
Quoted 25 lines
But I will try to let Yocto apply a patch, instead of adding to my git.
Quoted 23 lines
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-0e17f0bb..62764ec 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/
extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-2-NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC)$(PLATFORM_CPPFLAGS)
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +2
-2-print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC} $(call if_changed,objcopy) --Quoted 3 lines
Quoted 3 lines
I hope this helps.
Best regards,
Stefano --
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
[email protected]
=====================================================================
Op Thu, 24 Aug 2017 16:35:05 +0000, schreef Ferry Toth:
Quoted 114 lines
Op Thu, 24 Aug 2017 17:48:55 +0200, schreef Stefano Babic:
Quoted 68 lines
Hi Ferry,
Quoted 65 lines · Ferry Toth
Op Thu, 24 Aug 2017 12:40:57 +0200, schreef Stefano Babic:
Quoted 63 lines
Hi Ferry,
Quoted 60 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 58 lines · Ferry Toth
Quoted 57 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 55 lines · Ferry Toth
Quoted 54 lines
Quoted 52 lines · Ferry Toth
Quoted 11 lines · Khem Raj
Quoted 10 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto.
Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.I am extending meta-intel-edison to build a 64 bit Poke Morty,
with a vanilla 64-bit kernel (4.12). This is working quite well.Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-
in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 14 lines
Quoted 14 lines
v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 8 lines
Quoted 8 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/
edison-
Quoted 136 lines
Quoted 55 lines
Quoted 49 lines
Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 29 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned* solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issue
Quoted 5 lines
Alright then. But I didn't intend to build a 64 bit U-Boot. I intended to build a 64 bit image, which consists in the end of 3 binary image, U- Boot, Linux and rootfs. The bitness of U-Boot should not depend on either host or target bitness, it should only depend on the architectures requirements.
Quoted 3 lines
Right, but you cannot build a 64-bit U-Boot: it is unsupported. In fact,
when U-Boot is built, gcc is called with -march=i386 -m32.That is exactly as it should be.
Quoted 2 lines
If you check any compiled file, you get a 32 bit object, even if you set tune=core-64.
Exactly, but I will double check, just to see if there is something wrong with the recipe.
Quoted 20 lines
Quoted 9 lines
Quoted 8 lines
is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see
CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.Quoted 3 lines
Still don't get this. When I build outside of Yocto on a 64 bit host, it just builds. U-Boot's make file already selects the correct target bitness and finds the correct libraries.
Right, if you have multilib support. Then you have 32-bit version of libgcc.a
Quoted 3 lines
To me that sounds like that building inside Yocto should just work too,
if I just get the configuration right.Quoted 8 lines
You built for 64 bit - when the
arch/x86/Makefilein U-Boot is called, it tries to find the library itself:$(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name)
This always results in the 64bit version of the library built by Yocto. So you have all U-Boot objects built with "-m32" (32 bit objects) and it tries to link against 64 bit libgcc.
But that would also happens on the host platform (building outside Yocto)
and it doesn't. The host does have multilib and in some genious way gcc finds the 32 bit lib and links against it.Quoted 9 lines
At least, this what I deducted from the errors...
Quoted 2 lines
And correct me if I'm wrong, to do that that I need to force Yocto to build 32 bit target, in case of U-Boot (lib32-u-boot?).
This is already done in U-Boot Makefiles. The architecture is overwritten because "m32" is set inside U-Boot
Makefile(just for x86).Quoted 7 lines
Quoted 5 lines
Or override tune=core-64 for U-Boot only?
Still, when I build on my host outside of Yocto I don't need to do any of this. And the linker probably uses 32 bit copy of libgcc.a installed with multilib on my host.
Absolutely right.
But the host platform is 64 bit, so that probably shows in $(PLATFORM_CPPFLAGS). Everything is built 32 bit due to U-Boot's m32 override. So how does it know where to find the 32 bit lib?
Quoted 9 lines
Quoted 6 lines
Hence my question: Yocto has multilib, which in this case installs 32 bit libs into the targets sysroot. And I suspect I need to install 32 bit libs into the -native sysroot. How to do that? All the documentation I found are related to installing libs into the target image.
I don't know - I have given up this way because it looks to me messy to have multilib just for getting libgcc.a to link u-boot.
The patch below is to find a 32 bit version of the library, put it somewhere and patch U-Boot to use that. That sounds way more messy than installing installing multilib into the -native envirnment.
Quoted 8 lines
Except I am not sure if that can be done.
I could try to build U-Boot in the sdk or target environment, as that has multilib, but probably the U-Boot image will then be misplaced.
I could also tell bitbake to use the host compiler and environment, but that then puts requirement on the hosts gcc alternatives and puts a requirement for multilib on the host actually being installed.
I think I get it. The problem is not that I am building for a 64 bit target as this is overruled by U-Boot make. The problem is that it needs the 32 bit lib in the -native sysroot. And if the following feature request https://bugzilla.yoctoproject.org/show_bug.cgi?id=7960 is current it is not (yet) possible to add the lib using multilib.
However, on a 32-bit host the -native sysroot would be i686 and the target will be crosscompiled to x86-64, except for U-Boot which will still overrule that and build 32-bit, with the 32-bit lib now present.
So, on a x86-64 host I need to overrule bitbake detecting the host arch and using that for the -native arch and instead build a i686 -native sysroot - which should still run on a 64-bit host.
Otherwise, building U-Boot outside Yocto is the most practical solution.
Quoted 11 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
Yes, as I understand now, it is not even possible to build U-Boot for x86 on an arm platform. Strange.
Quoted 4 lines
Quoted 2 lines
I think I saw something upstreamed related to this, I'd prefer to wait till that lands.
I have not yet seen it, it looks I missed that fix.
I probably got that mixed up with another issue.
Quoted 38 lines
Quoted 38 lines
Quoted 26 lines
But I will try to let Yocto apply a patch, instead of adding to my git.
Quoted 23 lines
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-0e17f0bb..62764ec 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/
extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-2-NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC)$(PLATFORM_CPPFLAGS)
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +2
-2-print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC} $(call if_changed,objcopy) --Quoted 4 lines
Quoted 4 lines
I hope this helps.
Best regards,
Stefano --
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
[email protected]
=====================================================================
Op Thu, 24 Aug 2017 21:34:56 +0000, schreef Ferry Toth:
Quoted 300 lines
Op Thu, 24 Aug 2017 16:35:05 +0000, schreef Ferry Toth:
Quoted 114 lines
Op Thu, 24 Aug 2017 17:48:55 +0200, schreef Stefano Babic:
Quoted 68 lines
Hi Ferry,
Quoted 65 lines · Ferry Toth
Op Thu, 24 Aug 2017 12:40:57 +0200, schreef Stefano Babic:
Quoted 63 lines
Hi Ferry,
Quoted 60 lines · Ferry Toth
Op Wed, 23 Aug 2017 21:07:56 -0700, schreef Khem Raj:
Quoted 58 lines · Ferry Toth
Quoted 57 lines
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 55 lines · Ferry Toth
Quoted 54 lines
Quoted 52 lines · Ferry Toth
Quoted 11 lines · Khem Raj
Quoted 10 lines · Ferry Toth
I am having trouble building a specific U-Boot version with
Yocto.
Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it
builds fine.I am extending meta-intel-edison to build a 64 bit Poke
Morty,
with a vanilla 64-bit kernel (4.12). This is working quite
well.Quoted 7 lines
Quoted 4 lines
My host is x86_64, the target is core2 with tune=core-64.
Without 64bit tune I can build U-Boot fine. With 64bit it
can not link, appearently because it needs lbgcc.awhat is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-
in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 14 lines
Quoted 14 lines
v2017.03-
Quoted 12 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 4 lines
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
compiler may not be generating calls for the missing function.
That would be a bug then? Regardless if I set tune=core-64 or not the resulting U-Boot should be the same.
Quoted 7 lines
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3I will do that tonight.
Quoted 8 lines
Quoted 8 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/
edison-
Quoted 140 lines
Quoted 57 lines
Quoted 51 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 32 lines
Quoted 32 lines
Quoted 25 lines
I attempted to add multilib, but although that immediately
exposed bugs in other recipes but actually adds libgcc.a, it
does that for the target sysroot only.And for some reason, U-Boot is built with the native gcc
(x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably
only to -native and not to the target, as the target has not
further use for it?Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX}
CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'
EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS}
${BUILD_LDFLAGS}"'But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So TARGET_PREFIX resolves to x86_64-poky-linux, but I think
my target is core2_64 (or something like that). Is that
normal for U-Boot?thats ok.
Quoted 3 lines
I am a little lost, so any help would be greatly
appreciated!Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Ferry
This is a known problem in U-Boot for x86 and it is not yet *cleaned*
solved. U-Boot for x86 is a 32 bit - there are just disadvantages to go to 64 bit version because it is overkilling for a bootloader . The issueQuoted 5 lines
Alright then. But I didn't intend to build a 64 bit U-Boot. I intended to build a 64 bit image, which consists in the end of 3 binary image, U- Boot, Linux and rootfs. The bitness of U-Boot should not depend on either host or target bitness, it should only depend on the architectures requirements.
Quoted 3 lines
Right, but you cannot build a 64-bit U-Boot: it is unsupported. In fact,
when U-Boot is built, gcc is called with -march=i386 -m32.That is exactly as it should be.
Quoted 2 lines
If you check any compiled file, you get a 32 bit object, even if you set tune=core-64.
Exactly, but I will double check, just to see if there is something wrong with the recipe.
Quoted 23 lines
Quoted 9 lines
Quoted 8 lines
is, as you have found, the libgcc.a library, because the library supplied with the host distro is used. This is solved in an elegant way with other architectures (PowerPC, ARM) because the required (just a few) functions taken from libgcc.a are reimplemented in U-Boot (see
CONFIG_USE_PRIVATE_LIBGCC, too.) . But this was not done for X86, because host and target shared (until 64 bit came) the same architecture and the host library is taken. However, this breaks in Yocto because the generated library (and then, 64 bit) is taken.Quoted 3 lines
Still don't get this. When I build outside of Yocto on a 64 bit host, it just builds. U-Boot's make file already selects the correct target bitness and finds the correct libraries.
Right, if you have multilib support. Then you have 32-bit version of libgcc.a
Quoted 3 lines
To me that sounds like that building inside Yocto should just work too,
if I just get the configuration right.You built for 64 bit - when the
arch/x86/Makefilein U-Boot is called, it tries to find the library itself:Quoted 6 lines
$(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name)
This always results in the 64bit version of the library built by Yocto.
So you have all U-Boot objects built with "-m32" (32 bit objects) and it tries to link against 64 bit libgcc.But that would also happens on the host platform (building outside Yocto)
and it doesn't. The host does have multilib and in some genious way gcc finds the 32 bit lib and links against it.Quoted 10 lines
At least, this what I deducted from the errors...
Quoted 2 lines
And correct me if I'm wrong, to do that that I need to force Yocto to build 32 bit target, in case of U-Boot (lib32-u-boot?).
This is already done in U-Boot Makefiles. The architecture is overwritten because "m32" is set inside U-Boot
Makefile(just for x86).Quoted 7 lines
Quoted 5 lines
Or override tune=core-64 for U-Boot only?
Still, when I build on my host outside of Yocto I don't need to do any of this. And the linker probably uses 32 bit copy of libgcc.a installed with multilib on my host.
Absolutely right.
But the host platform is 64 bit, so that probably shows in $(PLATFORM_CPPFLAGS). Everything is built 32 bit due to U-Boot's m32 override. So how does it know where to find the 32 bit lib?
Quoted 9 lines
Quoted 6 lines
Hence my question: Yocto has multilib, which in this case installs 32 bit libs into the targets sysroot. And I suspect I need to install 32 bit libs into the -native sysroot. How to do that? All the documentation I found are related to installing libs into the target image.
I don't know - I have given up this way because it looks to me messy to have multilib just for getting libgcc.a to link u-boot.
The patch below is to find a 32 bit version of the library, put it somewhere and patch U-Boot to use that. That sounds way more messy than installing installing multilib into the -native envirnment.
Quoted 8 lines
Except I am not sure if that can be done.
I could try to build U-Boot in the sdk or target environment, as that has multilib, but probably the U-Boot image will then be misplaced.
I could also tell bitbake to use the host compiler and environment, but that then puts requirement on the hosts gcc alternatives and puts a requirement for multilib on the host actually being installed.
I think I get it. The problem is not that I am building for a 64 bit target as this is overruled by U-Boot make. The problem is that it needs the 32 bit lib in the -native sysroot. And if the following feature request https://bugzilla.yoctoproject.org/show_bug.cgi?id=7960 is current it is not (yet) possible to add the lib using multilib.
However, on a 32-bit host the -native sysroot would be i686 and the target will be crosscompiled to x86-64, except for U-Boot which will still overrule that and build 32-bit, with the 32-bit lib now present.
So, on a x86-64 host I need to overrule bitbake detecting the host arch and using that for the -native arch and instead build a i686 -native sysroot - which should still run on a 64-bit host.
Otherwise, building U-Boot outside Yocto is the most practical solution.
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
The right and cleanest solution should be to fix in U-Boot just as it was done with other architectures.
Yes, as I understand now, it is not even possible to build U-Boot for x86 on an arm platform. Strange.
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
I think I saw something upstreamed related to this, I'd prefer to wait till that lands.
I have not yet seen it, it looks I missed that fix.
I probably got that mixed up with another issue.
That was this e719b6b0f8fa5c6f3f4aeaa319dcf17d735153f8
x86: Enforce toolchain to generate 64-bit codes for 64-bit U-Boot
Quoted 38 lines
Quoted 38 lines
Quoted 38 lines
Quoted 26 lines
But I will try to let Yocto apply a patch, instead of adding to my git.
Quoted 23 lines
The workaround I used in a couple of projects is to store in my custom meta layer a 32 bit copy of libgcc.a and patch U-Boot to use this instead of the library in the distro, that is in :
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-0e17f0bb..62764ec 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -40,7 +40,9 @@ obj-$(CONFIG_HAVE_FSP) += fsp/
extra-$(CONFIG_USE_PRIVATE_LIBGCC) += lib.a
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +0
-2-NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name) +#NORMAL_LIBGCC = $(shell $(CC)$(PLATFORM_CPPFLAGS)
arch/x86/lib/Makefile index renamed from arch/x86/lib/Makefile +2
-2-print-libgcc-file-name) +NORMAL_LIBGCC = $(PWD)/arch/$(ARCH)/lib/libgcc.a OBJCOPYFLAGS := --prefix-symbols=__normal_ $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE + echo "Library GCC" ${NORMAL_LIBGCC} $(call if_changed,objcopy) --Quoted 4 lines
Quoted 4 lines
I hope this helps.
Best regards,
Stefano --
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
[email protected]
=====================================================================
Quoted 71 lines · Khem Raj
Quoted 58 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 41 lines · Ferry Toth
Quoted 40 lines
Quoted 38 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map
ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 8 lines
Quoted 5 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
If change my setup to build for a 32bit target, it build u-boot without error.
Quoted 8 lines
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be:
make -j8edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3
20: 00000000 22 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 22 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 22 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 22 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3
Quoted 72 lines
Quoted 71 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 63 lines
Quoted 63 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc(quoted diff) +0
-6-isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 38 lines
Quoted 29 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 6 lines
Quoted 5 lines
I am a little lost, so any help would be greatly appreciated!
Ferry
--
--
--
Op Fri, 25 Aug 2017 21:22:40 +0200, schreef Ferry Toth:
Quoted 84 lines
Quoted 72 lines · Khem Raj
Quoted 66 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 42 lines · Ferry Toth
Quoted 41 lines
Quoted 39 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.odrivers/usb/host/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o:
In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 6 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
Quoted 8 lines
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3
Quoted 8 lines
20: 00000000 22 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 22 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 22 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 22 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3
AFAIKT when building for a 32-bit target is only that U-Boot makefile is called with CROSS_COMPILE=i686-poky-linux- CC=i686-poky-linux-gcc instead of CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc.
Result from readelf -sW gcc.o built wuth i686:
20: 00000000 27 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 27 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 27 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 27 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3
The path to libs and incs is the same (x86_64...) and I can't find any libgcc.a there. Still it links in this case.
Maybe in the 64-bit case I need to add i686-poky-linux-gcc to native and modify the recipe to use that?
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 66 lines
Quoted 66 lines
Quoted 56 lines
Quoted 56 lines
Quoted 56 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2 -pipe(quoted diff) +0
-6-L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 31 lines
Quoted 31 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 2 lines
I am a little lost, so any help would be greatly appreciated!
Quoted 9 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
Ferry
--
--
--
Solved : Re: Problems building U-Boot for x86_64
Op Fri, 25 Aug 2017 22:30:42 +0000, schreef Ferry Toth:
Quoted 117 lines
Op Fri, 25 Aug 2017 21:22:40 +0200, schreef Ferry Toth:
Quoted 84 lines
Quoted 71 lines · Khem Raj
Quoted 66 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 42 lines · Ferry Toth
Quoted 41 lines
Quoted 39 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 6 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
Quoted 8 lines
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3Quoted 8 lines
20: 00000000 22 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 22 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 22 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 22 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3AFAIKT when building for a 32-bit target is only that U-Boot makefile is called with CROSS_COMPILE=i686-poky-linux- CC=i686-poky-linux-gcc instead of CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc.
Result from readelf -sW gcc.o built wuth i686:
20: 00000000 27 FUNC GLOBAL HIDDEN 4
__wrap___divdi321:
00000000 0 NOTYPE GLOBAL DEFAULT UND__normal___divdi322:
00000000 27 FUNC GLOBAL HIDDEN 6__wrap___udivdi323: 000000000 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 27FUNC GLOBAL HIDDEN 8
__wrap___moddi325: 00000000 0 NOTYPE
GLOBAL DEFAULT UND__normal___moddi326: 00000000 27 FUNC GLOBAL
HIDDEN 10__wrap___umoddi327: 00000000 0 NOTYPE GLOBAL DEFAULT
UND__normal___umoddi3The path to libs and incs is the same (
x86_64...) and I can't find any libgcc.a there. Still it links in this case.Maybe in the 64-bit case I need to add i686-poky-linux-gcc to native and modify the recipe to use that?
Quoted 63 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 30 lines
Quoted 30 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 1 line
I am a little lost, so any help would be greatly appreciated
I added multilib to the meta0intel-edison-bsp machine conf:
#multilib
require conf/multilib.conf
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32" IMAGE_INSTALL_append = " lib32-libgcc"
This exposes a lot recipy bugs in other places that needed to be fixed first.
Then I changed IMAGE_INSTALL += "u-boot" to "lib32_u-boot". Now it builds without error.
Now I changed IMAGE_INSTALL tot EXTRA_IMAGEDEPENDS. I believe that will prevent u-boot and the otherwise unecessary multilib to be installed on the image. Not sure if that really works out as I hope.
All of this now causes populate_sdk to fail, but I will post that seperately.
Thanks all for the usefull comments.
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 9 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
Ferry
--
--
--
Re: Solved : Re: Problems building U-Boot for x86_64
Hi Ferry,
Quoted 196 lines · Ferry Toth
Op Fri, 25 Aug 2017 22:30:42 +0000, schreef Ferry Toth:
Quoted 117 lines
Op Fri, 25 Aug 2017 21:22:40 +0200, schreef Ferry Toth:
Quoted 84 lines
Quoted 71 lines · Khem Raj
Quoted 66 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 42 lines · Ferry Toth
Quoted 41 lines
Quoted 39 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 6 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
Quoted 8 lines
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3Quoted 8 lines
20: 00000000 22 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 22 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 22 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 22 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3AFAIKT when building for a 32-bit target is only that U-Boot makefile is called with CROSS_COMPILE=i686-poky-linux- CC=i686-poky-linux-gcc instead of CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc.
Result from readelf -sW gcc.o built wuth i686:
20: 00000000 27 FUNC GLOBAL HIDDEN 4
__wrap___divdi321:
00000000 0 NOTYPE GLOBAL DEFAULT UND__normal___divdi322:
00000000 27 FUNC GLOBAL HIDDEN 6__wrap___udivdi323: 000000000 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 27FUNC GLOBAL HIDDEN 8
__wrap___moddi325: 00000000 0 NOTYPE
GLOBAL DEFAULT UND__normal___moddi326: 00000000 27 FUNC GLOBAL
HIDDEN 10__wrap___umoddi327: 00000000 0 NOTYPE GLOBAL DEFAULT
UND__normal___umoddi3The path to libs and incs is the same (
x86_64...) and I can't find any libgcc.a there. Still it links in this case.Maybe in the 64-bit case I need to add i686-poky-linux-gcc to native and modify the recipe to use that?
Quoted 63 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 30 lines
Quoted 30 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 1 line
I am a little lost, so any help would be greatly appreciated
I added multilib to the meta0intel-edison-bsp machine conf:
#multilib
requireconf/multilib.conf
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"IMAGE_INSTALL_append= " lib32-libgcc"This exposes a lot recipy bugs in other places that needed to be fixed first.
Then I changed
IMAGE_INSTALL+= "u-boot" to "lib32_u-boot". Now it builds without error.
Quoted 8 lines
Now I changed
IMAGE_INSTALLtotEXTRA_IMAGEDEPENDS. I believe that will prevent u-boot and the otherwise unecessary multilib to be installed on the image. Not sure if that really works out as I hope.All of this now causes
populate_sdkto fail, but I will post that seperately.Thanks all for the usefull comments.
Just a quick update on this. I recently sent a patch to the U-Boot list, fixing this x86 toolchain dependency in mainline U-Boot:
https://patchwork.ozlabs.org/patch/842613/
This patch will be included in the upcoming release (2018.01).
Thanks,
Stefan
Re: Solved : Re: Problems building U-Boot for x86_64
Op donderdag 30 november 2017 09:03:46 CET schreef Stefan Roese:
Quoted 206 lines
Hi Ferry,
Quoted 203 lines · Ferry Toth
Op Fri, 25 Aug 2017 22:30:42 +0000, schreef Ferry Toth:
Quoted 117 lines
Op Fri, 25 Aug 2017 21:22:40 +0200, schreef Ferry Toth:
Quoted 84 lines
Quoted 71 lines · Khem Raj
Quoted 66 lines · Ferry Toth
Op Wed, 23 Aug 2017 14:51:55 -0700, schreef Khem Raj:
Quoted 42 lines · Ferry Toth
Quoted 41 lines
Quoted 39 lines · Ferry Toth
Quoted 8 lines · Khem Raj
Quoted 7 lines · Ferry Toth
I am having trouble building a specific U-Boot version with Yocto. Outside of Yocto on 64 bit Ubuntu 17.04 with multilib it builds fine.
I am extending meta-intel-edison to build a 64 bit Poke Morty, with a vanilla 64-bit kernel (4.12). This is working quite well.
Quoted 7 lines
Quoted 4 lines
My host is
x86_64, the target is core2 with tune=core-64.Without 64bit tune I can build U-Boot fine. With 64bit it can not link, appearently because it needs lbgcc.a
what is exact error message ? is it while compiling host bits or target bits ?
The failing line is:
x86_64-poky-linux-ld.bfd -Bsymbolic -Bsymbolic-functions -melf_i386--emit- relocs --wrap=__divdi3 --wrap=__udivdi3 --wrap=__moddi3 --wrap=__umoddi3 -- gc-sections -pie -Bstatic --no-dynamic-linker -Ttext0x01101000-o u-boot -Tu-boot.ldsarch/x86/cpu/start.o--start-grouparch/x86/cpu/built-in.oarch/x86/lib/built-in.oboard/intel/edison/built-in.ocmd/built-in.ocommon/built-in.odisk/built-in.odrivers/built-in.odrivers/dma/built-in.odrivers/gpio/built-in.odrivers/i2c/built-in.odrivers/mmc/built-in.odrivers/mtd/built-in.odrivers/mtd/onenand/built-in.odrivers/mtd/spi/built-in.odrivers/net/built-in.odrivers/net/phy/built-in.odrivers/pci/built-in.odrivers/power/built-in.odrivers/power/battery/built-in.odrivers/power/domain/built-in.odrivers/power/fuel_gauge/built-in.odrivers/power/mfd/built-in.odrivers/power/pmic/built-in.odrivers/power/regulator/built-in.odrivers/serial/built-in.odrivers/spi/built-in.odrivers/usb/common/built-in.odrivers/usb/dwc3/built-in.odrivers/usb/emul/built-in.odrivers/usb/eth/built-in.odrivers/usb/gadget/built-in.odrivers/usb/gadget/udc/built-in.oQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/built-in.odrivers/usb/musb-new/built-in.odrivers/usb/musb/built-in.odrivers/usb/phy/built-in.odrivers/usb/ulpi/built-in.odts/built-in.ofs/built-in.olib/built-in.onet/built-in.otest/built-in.otest/dm/built-in.o--end-grouparch/x86/lib/lib.a-Map u-boot.map ERROR:oe_runmakefailedarch/x86/lib/built-in.o: In function `__wrap___udivdi3':/home/ferry/tmp/edison-intel/my/edison-morty/out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison-v2017.03-
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
r0/git/arch/x86/lib/gcc.c:25: undefined reference to `__normal___udivdi3'I as believe the missing lib is libgcc.a I just my sysroot and found it here:
Quoted 6 lines
the linker cmdline above does not link with libgcc and there might be a good reason for that, many standalone applications dont link with libgcc intentionally. You could look into the code and see if it can be written differently such that gcc does not have to invoke a helper function from gcc runtime. Another option is to link with libgcc explicitly
Quoted 2 lines
If change my setup to build for a 32bit target, it build u-boot without error.
Quoted 8 lines
compiler may not be generating calls for the missing function.
Quoted 3 lines
When I build the same git outside yocto on 64bit with multilib installed it also builds without error. In that case the make command would be: make -j8
edison_defconfigsame is possible. Can you do readelf -sW gcc.o and see if there is a undefined reference to
__normal___udivdi3Quoted 8 lines
20: 00000000 22 FUNC GLOBAL HIDDEN 4 __wrap___divdi3 21: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___divdi3 22: 00000000 22 FUNC GLOBAL HIDDEN 6 __wrap___udivdi3 23: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 22 FUNC GLOBAL HIDDEN 8 __wrap___moddi3 25: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___moddi3 26: 00000000 22 FUNC GLOBAL HIDDEN 10 __wrap___umoddi3 27: 00000000 0 NOTYPE GLOBAL DEFAULT UND __normal___umoddi3AFAIKT when building for a 32-bit target is only that U-Boot makefile is called with CROSS_COMPILE=i686-poky-linux- CC=i686-poky-linux-gcc instead of CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc.
Result from readelf -sW gcc.o built wuth i686:
20: 00000000 27 FUNC GLOBAL HIDDEN 4
__wrap___divdi321:
00000000 0 NOTYPE GLOBAL DEFAULT UND__normal___divdi322:
00000000 27 FUNC GLOBAL HIDDEN 6__wrap___udivdi323: 000000000 NOTYPE GLOBAL DEFAULT UND __normal___udivdi3 24: 00000000 27FUNC GLOBAL HIDDEN 8
__wrap___moddi325: 00000000 0 NOTYPE
GLOBAL DEFAULT UND__normal___moddi326: 00000000 27 FUNC GLOBAL
HIDDEN 10__wrap___umoddi327: 00000000 0 NOTYPE GLOBAL DEFAULT
UND__normal___umoddi3The path to libs and incs is the same (
x86_64...) and I can't find any libgcc.a there. Still it links in this case.Maybe in the 64-bit case I need to add i686-poky-linux-gcc to native and modify the recipe to use that?
Quoted 63 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
My conclusion: I have some bb variable set to the wrong value or I need to get multilib installed into /..../sysroots/x86_64-linux/lib.
So how to do that?
Quoted 2 lines
Quoted 2 lines
sysroots/lib32-edison/usr/lib/i686-pokymllib32-linux/6.2.0/ sysroots/lib32-edison-tcbootstrap/usr/lib/i686-pokymllib32-
linux/6.2.0/
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
sysroots/edison/usr/lib64/x86_64-poky-linux/6.2.0/ sysroots/edison-tcbootstrap/usr/lib64/x86_64-poky-linux/6.2.0/
How compile log shows:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux- CC=x86_64-poky-linux-gcc --sysroot=/..../sysroots/edison V=1 HOSTCC=gcc -isystem/..../sysroots/x86_64-linux/usr/include -O2(quoted diff) +0
-6-pipe -L/..../sysroots/x86_64-linux/usr/lib -L/..../sysroots/x86_64-linux/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/..../sysroots/x86_64-linux/lib -Wl,-rpath,/..../sysroots/x86_64-linux/usr/lib -Wl,-rpath,/..../sysroots/x86_64-linux/lib -Wl,-O1 -C/..../out/linux64/build/tmp/work/edison-poky-linux/u-boot/edison- v2017.03-r0/git O=/..../out/linux64/build/tmp/work/edison-poky-linux/u- boot/edison-v2017.03-r0/build
edison_defconfig(.... my edits to shorten the uninteresting part of the path)
I would think: --sysroot points to /edison dir which actually contains libgcc.a, but -i, _l and -W1 options point to host dirs that don't have the lib.
Quoted 30 lines
Quoted 30 lines
Quoted 18 lines
I attempted to add multilib, but although that immediately exposed bugs in other recipes but actually adds libgcc.a, it does that for the target sysroot only.
And for some reason, U-Boot is built with the native gcc (x86_64-linux),
and multilib does not add libgcc.a to that sysroot.So, how do I add multilib to -native sysroot, preferably only to -native and not to the target, as the target has not further use for it?
Strangest thing is in u-boot.inc there is:
EXTRA_OEMAKE= 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'EXTRA_OEMAKE+= 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'Quoted 7 lines
But when I check my log file:
NOTE: make -j8 CROSS_COMPILE=x86_64-poky-linux-
CC=x86_64-poky-linux- gcc ......So
TARGET_PREFIXresolves to x86_64-poky-linux, but I think my target iscore2_64(or something like that). Is that normal for U-Boot?thats ok.
Quoted 1 line
I am a little lost, so any help would be greatly appreciated
I added multilib to the meta0intel-edison-bsp machine conf:
#multilib
requireconf/multilib.conf
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"IMAGE_INSTALL_append= " lib32-libgcc"This exposes a lot recipy bugs in other places that needed to be fixed first.
Then I changed
IMAGE_INSTALL+= "u-boot" to "lib32_u-boot". Now it builds without error.Now I changed
IMAGE_INSTALLtotEXTRA_IMAGEDEPENDS. I believe that will prevent u-boot and the otherwise unecessary multilib to be installed on the image. Not sure if that really works out as I hope.All of this now causes
populate_sdkto fail, but I will post that seperately.
Quoted 8 lines
Quoted 1 line
Thanks all for the usefull comments.
Just a quick update on this. I recently sent a patch to the U-Boot list, fixing this x86 toolchain dependency in mainline U-Boot:
https://patchwork.ozlabs.org/patch/842613/
This patch will be included in the upcoming release (2018.01).
And it is working brilliantly regardless if I set DEFAULTTUNE = “core2-64” or not, thanks so much!
Signature · 1 line
Ferry Toth
Quoted 3 lines
Thanks,
Stefan