Skip to contentSkip to conversation

EDAC k8 MC1: unknown syndrome

DISCUSSION Phil Moors 2 participants 2 messages Aug 9, 2007

lore
Share & tools
lore

Phil Moors

author
#0 lore raw

I'm getting these in the log:

EDAC k8 MC1: unknown syndrome 0x9391 - possible error reporting race EDAC MC1: CE - no information available: k8_edac

Quoted 1 line

From looking about, I think that MC1 is memory controller 1 (on 2nd cpu)

and that CE is about error correction in ECC.

But is the error really reporting a DIMM problem or a race condition in the kernel code handling ECC?

Thanks,
Phil

#1 lore raw
Quoted 3 lines · Phil Moors

But is the error really reporting a DIMM problem or a race condition in the kernel code handling ECC?

First if you don't use a mainline kernel you should at least mention it in the report.

It could well be a race -- the k8 DAC code is always racing against the builtin machine check handler which reads the same registers. That is why it was never accepted for mainline and shouldn't be used.

However these races should normally only cause lost events, not bogus data, so it's probably something the CPU really reported and EDAC doesn't understand.

The builtin machine check code will report all the same information through mcelog (on x86-64) or syslog (on i386)

-Andi