Skip to contentSkip to conversation

Wrong location of environment. Copy environment, substitute variables?

U-Boot-Users Andrew Zhukov 3 participants 3 messages Jul 7, 2006 – Jul 8, 2006

lore
Share & tools
lore
#0 lore raw

I have at91rm9200dk with SPI DataFlash only (without Flash), u-boot 1.1.4, kernel 2.6.10.

I'd like the kernel to use u-boot's "bootargs" as cmdline. To use u-boot's data the kernel should know its absolute locations... I see the kernel expects environment at TEXT_BASE + 0x100 (that's 20000100), but u-boot places environment at 21ede00c (result of function env_get_addr(0)). I believe the last will move if I edit smth in u-boot.

Summary: in function do_bootm (where u-boot starts loading the kernel), I should copy the whole environment to the area starting from location 20000100.

Is this right way?

Trouble: bootm doesn't substitute variables (${ipaddr} ${serverip} etc.). I should copy-substitute. There should be a function for substitution - does anybody know?

Regards
Andrew

#1 lore raw
Quoted 9 lines · Andrew Zhukov

I have at91rm9200dk with SPI DataFlash only (without Flash), u-boot 1.1.4, kernel 2.6.10.

I'd like the kernel to use u-boot's "bootargs" as cmdline. To use u-boot's data the kernel should know its absolute locations... I see the kernel expects environment at TEXT_BASE + 0x100 (that's 20000100), but u-boot places environment at 21ede00c (result of function env_get_addr(0)). I believe the last will move if I edit smth in u-boot.

Quoted 5 lines

Summary: in function do_bootm (where u-boot starts loading the kernel), I should copy the whole environment to the area starting from location 20000100.

Is this right way?

No no no!
The kernel expects a tagged list of parameters at 0x20000100; this list includes - among other values - the contents of "bootargs" tagged as command-line "ATAG_CMDLINE" (only the contents of bootargs is copied; other u-boot environment variables are not).

This already works out-of-the-box.

Quoted 3 lines

Trouble: bootm doesn't substitute variables (${ipaddr} ${serverip} etc.). I should copy-substitute. There should be a function for substitution - does anybody know?

With the hush parser you can use a trick like e.g. setenv bootcmd setenv bootargs ip=${ipaddr} ... \; bootm 0x10040000

'boot' will then set the bootargs variable just prior to booting.

Cheers
Anders

#2 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

With the hush parser you can use a trick like e.g. setenv bootcmd setenv bootargs ip=${ipaddr} ... \; bootm 0x10040000

The same works exactly like this using the simple parser, btw. (even using the same syntax).

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"In the long run, every program becomes rococo, and then rubble."
- Alan Perlis