Skip to contentSkip to conversation

UX suggestion

PATCH In review Jan Judas 4 participants 8 messages Aug 31, 2021 – Sep 2, 2021

lore
Share & tools
lore

Jan Judas

author
#0 lore raw

Hello,

first time posting here, I hope I'm doing it right.
I'd like to suggest a very minor UX improvement regarding the message:

error: The last gc run reported the following. Please correct the root cause and remove /path/to/repo/.git/gc.log.

Currently, there is a dot after the file path, so it's impossible to select just the path using double-click. If the dot was removed, or separated from the path by a space, it would be slightly more convenient :-)

Thank you

Jan Judas

#1 lore raw

PATCH 1/1 gc: remove trailing dot from "gc.log" line

Remove the trailing dot from the warning we emit about gc.log. It's common for various terminal UX's to allow the user to select "words", and by including the trailing dot a user wanting to select the path to gc.log will need to manually remove the trailing dot.

Such a user would also probably need to adjust the path if it e.g. had spaces in it, but this should address this very common case.

---

Quoted 4 lines · Jan Judas

Hello,

first time posting here, I hope I'm doing it right.
I'd like to suggest a very minor UX improvement regarding the message:

This is the right place for this request. Thanks!

Quoted 11 lines

error: The last gc run reported the following. Please correct the root cause and remove /path/to/repo/.git/gc.log.

Currently, there is a dot after the file path, so it's impossible to select just the path using double-click. If the dot was removed, or separated from the path by a space, it would be slightly more convenient :-)

Thank you

Jan Judas

Yes that's annoying, here's a proposed patch to fix this.

As an aside I've also noticed that if you have multiple worktrees we'll trigger "git gc --auto" in each one, and then litter various per-worktree gc.log, even though the issues being noted are usually repository-global, e.g. too many loose objects.

That's per-se unrelated to the issue you're noting, but is usually why I end up having to manually remove gc.log files...

 builtin/gc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
builtin/gc.c +1 -1
index 6ce5ca45126..69c058533ea 100644
@@ -502,7 +502,7 @@ static int report_last_gc_error(void)
 		 */
 		warning(_("The last gc run reported the following. "
 			       "Please correct the root cause\n"
-			       "and remove %s.\n"
+			       "and remove %s\n"
 			       "Automatic cleanup will not be performed "
 			       "until the file is removed.\n\n"
 			       "%s"),
Signature · 1 line
2.33.0.805.g739b16c2189
#2 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

Quoted 13 lines · Ævar Arnfjörð Bjarmason

Remove the trailing dot from the warning we emit about gc.log. It's common for various terminal UX's to allow the user to select "words", and by including the trailing dot a user wanting to select the path to gc.log will need to manually remove the trailing dot.

Such a user would also probably need to adjust the path if it e.g. had spaces in it, but this should address this very common case.

---

builtin/gc.c static int report_last_gc_error(void) · line 504

Quoted 4 lines
builtin/gc.c +1 -1
@@ -502,7 +502,7 @@ static int report_last_gc_error(void)
                warning(_("The last gc run reported the following. "
                               "Please correct the root cause\n"
-                              "and remove %s.\n"
+                              "and remove %s\n"

Bikeshedding: Adding a colon after "remove" would give this a slightly more grammatically-correct feel:

Please correct the root cause
and remove: /path/to/repo/.git/gc.log

builtin/gc.c static int report_last_gc_error(void) · line 508

Quoted 3 lines
builtin/gc.c +0 -0
                               "Automatic cleanup will not be performed "
                               "until the file is removed.\n\n"
                               "%s"),

Even more bikeshedding:

Please correct the root cause and remove
/path/to/repo/.git/gc.log
to allow automatic cleanup to resume.

or something.

#3 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

Quoted 23 lines · Eric Sunshine
Quoted 13 lines · Ævar Arnfjörð Bjarmason

Remove the trailing dot from the warning we emit about gc.log. It's common for various terminal UX's to allow the user to select "words", and by including the trailing dot a user wanting to select the path to gc.log will need to manually remove the trailing dot.

Such a user would also probably need to adjust the path if it e.g. had spaces in it, but this should address this very common case.

---

builtin/gc.c static int report_last_gc_error(void) · line 504

Quoted 4 lines
builtin/gc.c +1 -1
@@ -502,7 +502,7 @@ static int report_last_gc_error(void)
                warning(_("The last gc run reported the following. "
                               "Please correct the root cause\n"
-                              "and remove %s.\n"
+                              "and remove %s\n"

Bikeshedding: Adding a colon after "remove" would give this a slightly more grammatically-correct feel:

Quoted 6 lines

Please correct the root cause
and remove: /path/to/repo/.git/gc.log

Quoted 3 lines
builtin/gc.c +0 -0
                               "Automatic cleanup will not be performed "
                               "until the file is removed.\n\n"
                               "%s"),

OK.

Quoted 7 lines

Even more bikeshedding:

Please correct the root cause and remove
/path/to/repo/.git/gc.log
to allow automatic cleanup to resume.

or something.

I also found the line break before "and remove" strange, but I think that is because the "Please" is not at the beginning of the paragraph, but is a second sentence. Perhaps unfolding "and remove" would make the first line overly long?

THanks.

#4 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

Quoted 14 lines · Junio C Hamano
Quoted 13 lines · Eric Sunshine

builtin/gc.c static int report_last_gc_error(void) · line 505

Quoted 4 lines · Ævar Arnfjörð Bjarmason

warning(_("The last gc run reported the following. "
"Please correct the root cause\n"

builtin/gc.c +1 -1
-                              "and remove %s.\n"
+                              "and remove %s\n"

Even more bikeshedding:

Please correct the root cause and remove
/path/to/repo/.git/gc.log
to allow automatic cleanup to resume.

Quoted 6 lines
Quoted 1 line

or something.

I also found the line break before "and remove" strange, but I think that is because the "Please" is not at the beginning of the paragraph, but is a second sentence. Perhaps unfolding "and remove" would make the first line overly long?

Yep, you're right, and perhaps my "Even more bikeshedding" didn't clearly indicate that I was bikeshedding more about combining the "Please correct..." and "Automatic cleanup..." sentences into a single sentence, both as a another way to deal with the punctuation issue (thus allowing easy double-click) and to make the whole thing read a bit better.

#5 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

Quoted 22 lines · Eric Sunshine
Quoted 14 lines · Junio C Hamano
Quoted 13 lines · Eric Sunshine

builtin/gc.c static int report_last_gc_error(void) · line 505

Quoted 4 lines · Ævar Arnfjörð Bjarmason

warning(_("The last gc run reported the following. "
"Please correct the root cause\n"

builtin/gc.c +1 -1
-                              "and remove %s.\n"
+                              "and remove %s\n"

Even more bikeshedding:

Please correct the root cause and remove
/path/to/repo/.git/gc.log
to allow automatic cleanup to resume.

Quoted 6 lines
Quoted 1 line

or something.

I also found the line break before "and remove" strange, but I think that is because the "Please" is not at the beginning of the paragraph, but is a second sentence. Perhaps unfolding "and remove" would make the first line overly long?

Quoted 6 lines

Yep, you're right, and perhaps my "Even more bikeshedding" didn't clearly indicate that I was bikeshedding more about combining the "Please correct..." and "Automatic cleanup..." sentences into a single sentence, both as a another way to deal with the punctuation issue (thus allowing easy double-click) and to make the whole thing read a bit better.

I'm aware that it's not in any formal style guide, but for what it's worth I find that something like say:

Eric sent me an E-Mail with the Message-Id <CAPig+cTaJ=xm=K5Y8yn8RiOFHBH-nzhRztYRz3kYsqsyJUTACg@mail.gmail.com> My E-Mail client is displaying it right now.

Reads unambiguously as having an implied full-stop after "com>", especially as the next word starts on its own line, and is capitalized in a way that it wouldn't be if it weren't the start of a sentence.

In any case, I do think just removing the dot on the basis of that rationale is an improvement, both for the stated ease of copy/pasting, and to remove the ambiguity of whether the "." is part of the filename (yeah *nix filenames can also have \n, but that's a lot less likely).

I don't think sometihng like your "Even more bikeshedding" suggestion is better, since we're trying to continue a sentence after a potentially long filename that might on some platforms or OS's contain spaces etc.

In any case, I was hoping to just send a quick fix-as-a-patch to a tiny UX suggestion, and was hoping to not get into the much more subjective discussion of how to better reword "git gc"'s error messages in general. If that's where this thread is headed I'm afraid I'll need to tap out of it :)

#6 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

Quoted 5 lines · Ævar Arnfjörð Bjarmason

In any case, I was hoping to just send a quick fix-as-a-patch to a tiny UX suggestion, and was hoping to not get into the much more subjective discussion of how to better reword "git gc"'s error messages in general. If that's where this thread is headed I'm afraid I'll need to tap out of it :)

Fair enough. I hope that my explicit mention of "bikeshedding" made it clear that my comments weren't expectations of change but rather "if you plan to pursue it further, maybe try these ideas".

author
#7 lore raw

Re: [PATCH] gc: remove trailing dot from "gc.log" line

In reply to Ævar Arnfjörð Bjarmason

Wow, that was quick!
It's awesome to see a project that is alive and welcoming to new people (unlike some others I tried to contribute to). Thanks again and keep up the great work!

Jan

út 31. 8. 2021 v 16:37 odesílatel Ævar Arnfjörð Bjarmason <[email protected]> napsal:

Quoted 63 lines

Remove the trailing dot from the warning we emit about gc.log. It's common for various terminal UX's to allow the user to select "words", and by including the trailing dot a user wanting to select the path to gc.log will need to manually remove the trailing dot.

Such a user would also probably need to adjust the path if it e.g. had spaces in it, but this should address this very common case.

---

Quoted 4 lines · Jan Judas

Hello,

first time posting here, I hope I'm doing it right.
I'd like to suggest a very minor UX improvement regarding the message:

This is the right place for this request. Thanks!

Quoted 11 lines

error: The last gc run reported the following. Please correct the root cause and remove /path/to/repo/.git/gc.log.

Currently, there is a dot after the file path, so it's impossible to select just the path using double-click. If the dot was removed, or separated from the path by a space, it would be slightly more convenient :-)

Thank you

Jan Judas

Yes that's annoying, here's a proposed patch to fix this.

As an aside I've also noticed that if you have multiple worktrees we'll trigger "git gc --auto" in each one, and then litter various per-worktree gc.log, even though the issues being noted are usually repository-global, e.g. too many loose objects.

That's per-se unrelated to the issue you're noting, but is usually why I end up having to manually remove gc.log files...

 builtin/gc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
builtin/gc.c +1 -2
index 6ce5ca45126..69c058533ea 100644
@@ -502,7 +502,7 @@ static int report_last_gc_error(void)
                 */
                warning(_("The last gc run reported the following. "
                               "Please correct the root cause\n"
-                              "and remove %s.\n"
+                              "and remove %s\n"
                               "Automatic cleanup will not be performed "
                               "until the file is removed.\n\n"
                               "%s"),
--

2.33.0.805.g739b16c2189