Skip to contentSkip to conversation

Remove remaining deprecated packages for 2014.02

PATCH New Thomas De Schampheleire 2 participants 10 messages Feb 5, 2014 – Feb 8, 2014 Kbuild

lore
Share & tools
lore

Thomas De Schampheleire

author
#0 lore raw

PATCH v2 1/1 Remove remaining deprecated packages for 2014.02

This patch series removes all deprecated packages/features that we are allowed to remove for 2014.02 (deprecated since 2013.02 or earlier).

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2:
- update BR2_HAVE_DOCUMENTATION patch with comments from ThomasP.
- new tentative patch removing DISABLE_DOCUMENTATION

 Config.in                                              |  18 --
 Config.in.legacy                                       |  86 ++++++++++++++
 Makefile                                               |   2 -
 package/Config.in                                      |   4 -
 package/Makefile.in                                    |  12 -
 package/autoconf/Config.in                             |  10 -
 package/autoconf/autoconf.mk                           |   6 -
 package/automake/Config.in                             |  11 -
 package/automake/automake.mk                           |   3 -
 package/avahi/avahi.mk                                 |   2 +-
 package/berkeleydb/berkeleydb.mk                       |   4 -
 package/ccache/Config.in                               |  12 -
 package/ccache/ccache.mk                               |   1 -
 package/enlightenment/enlightenment.mk                 |   2 -
 package/ffmpeg/ffmpeg.mk                               |   2 +-
 package/gdb/Config.in.host                             |  12 -
 package/hdparm/hdparm.mk                               |   7 -
 package/kmod/kmod.mk                                   |  10 +-
 package/libbsd/libbsd.mk                               |   6 -
 package/linux-headers/Config.in.host                   |  15 --
 package/logsurfer/logsurfer.mk                         |  13 --
 package/ncurses/ncurses.mk                             |   2 +-
 package/netsnmp/netsnmp.mk                             |   7 +-
 package/opencv/opencv.mk                               |   4 +-
 package/perl/perl.mk                                   |   4 -
 package/pkg-autotools.mk                               |   7 +-
 package/pppd/pppd.mk                                   |  10 -
 package/pulseaudio/pulseaudio.mk                       |   2 +-
 package/python-pygame/python-pygame.mk                 |   2 -
 package/samba/samba.mk                                 |   2 -
 package/udisks/udisks.mk                               |   3 +-
 package/vala/vala.mk                                   |  10 +-
 package/vim/vim.mk                                     |   2 -
 package/x11r7/xproto_xcmiscproto/xproto_xcmiscproto.mk |   2 +-
 package/x11r7/xproto_xextproto/xproto_xextproto.mk     |   2 +-
 package/xstroke/Config.in                              |  14 --
 package/xstroke/xstroke-fix-link-issues.patch          |  35 -----
 package/xstroke/xstroke.mk                             |  13 --
 38 files changed, 108 insertions(+), 251 deletions(-)
author
#1 lore raw

PATCH v2 1/1 xstroke: remove deprecated package

xstroke has been deprecated since 2013.02 and thus can be removed in 2014.02.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in.legacy                              |   7 ++++
 package/Config.in                             |   1 -
 package/xstroke/Config.in                     |  14 ---------
 package/xstroke/xstroke-fix-link-issues.patch |  35 -----------------------
 package/xstroke/xstroke.mk                    |  13 --------
 5 files changed, 7 insertions(+), 63 deletions(-)
Config.in.legacy +7 -0
@@ -101,6 +101,13 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_PACKAGE_XSTROKE
+	bool "xstroke has been removed"
+	select BR2_LEGACY
+	help
+	  The 'xstroke' package has been removed since it has been
+	  deprecated for more than four buildroot releases.
+
 config BR2_PACKAGE_LZMA
 	bool "lzma target package has been removed"
 	select BR2_LEGACY
package/Config.in +0 -1
@@ -235,7 +235,6 @@ source "package/torsmo/Config.in"
 source "package/wmctrl/Config.in"
 source "package/x11vnc/Config.in"
 source "package/xscreensaver/Config.in"
-source "package/xstroke/Config.in"
 source "package/xterm/Config.in"
 source "package/xvkbd/Config.in"
package/xstroke/Config.in deleted +0 -14
deleted file mode 100644
@@ -1,14 +0,0 @@
-config BR2_PACKAGE_XSTROKE
-	bool "xstroke"
-	depends on BR2_PACKAGE_XORG7
-	# dead upstream, probably not many users
-	depends on BR2_DEPRECATED_SINCE_2013_02
-	select BR2_PACKAGE_XLIB_LIBXFT
-	select BR2_PACKAGE_XLIB_LIBXTST
-	select BR2_PACKAGE_XLIB_LIBXPM
-	select BR2_PACKAGE_XLIB_LIBXRENDER
-	select BR2_PACKAGE_XLIB_LIBXEXT
-	help
-	  Handwriting recognition for X
-
-	  http://mirror.egtvedt.no/avr32linux.org/twiki/pub/Main/XStroke
package/xstroke/xstroke-fix-link-issues.patch deleted +0 -35
deleted file mode 100644
@@ -1,35 +0,0 @@
-Fix link issues by linking against all needed libraries
-
-Since gcc 4.6, all libraries that are directly used must be explicitly
-passed on the command line. In the case of xstroke, linking against
-Xrender, Xext and dl was missing. For the first two, they are added
-through addition PKG_CHECK_MODULES() checks, for the latter, it is
-added next to -lm and -lpthread in Makefile.am.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
-Index: b/Makefile.am
-===================================================================
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -40,7 +40,7 @@
- BUILT_SOURCES = rec_parse.h rec_lex.h rec_lex.c
- AM_YFLAGS = -d
- 
--xstroke_LDADD = @XSTROKE_LIBS@ -lm -lpthread $(X_LIBS) -lXpm -lXtst
-+xstroke_LDADD = @XSTROKE_LIBS@ -ldl -lm -lpthread $(X_LIBS) -lXpm -lXtst
- AM_CFLAGS = @XSTROKE_CFLAGS@ -DXSTROKE_CONF_DIR='"$(sysconfdir)/xstroke"' $(X_CFLAGS)
- 
- EXTRA_DIST = xstroke_active.xpm xstroke_inactive.xpm etc/alphabet
-Index: b/configure.ac
-===================================================================
---- a/configure.ac
-+++ b/configure.ac
-@@ -26,7 +26,7 @@
- AC_CHECK_FUNCS([gettimeofday localtime_r])
- 
- AC_PATH_XTRA
--PKG_CHECK_MODULES(XSTROKE, xft)
-+PKG_CHECK_MODULES(XSTROKE, [xft xrender xext])
- 
- AC_CONFIG_FILES([Makefile])
- AC_OUTPUT
package/xstroke/xstroke.mk deleted +0 -13
deleted file mode 100644
@@ -1,13 +0,0 @@
-################################################################################
-#
-# xstroke
-#
-################################################################################
-
-XSTROKE_VERSION = 0.6
-XSTROKE_SITE = http://mirror.egtvedt.no/avr32linux.org/twiki/pub/Main/XStroke
-
-XSTROKE_DEPENDENCIES = xlib_libXft xlib_libXtst xlib_libXpm xlib_libXrender xlib_libXext
-XSTROKE_AUTORECONF = YES
-
-$(eval $(autotools-package))
author
#2 lore raw

PATCH v2 1/1 autoconf: remove deprecated target package

In reply to Thomas De Schampheleire

The autoconf support on target has been deprecated for more than four buildroot releases and thus can be removed. This doesn't change anything about the host autoconf support.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in.legacy             |   8 ++++++++
 package/Config.in            |   1 -
 package/autoconf/Config.in   |  10 ----------
 package/autoconf/autoconf.mk |   6 ------
 4 files changed, 8 insertions(+), 17 deletions(-)
Config.in.legacy +8 -0
@@ -101,6 +101,14 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_PACKAGE_AUTOCONF
+	bool "autoconf target package has been removed"
+	select BR2_LEGACY
+	help
+	  The 'autoconf' target package has been removed since it has been
+	  deprecated for more than four buildroot releases.
+	  Note: the host autoconf still exists.
+
 config BR2_PACKAGE_XSTROKE
 	bool "xstroke has been removed"
 	select BR2_LEGACY
package/Config.in +0 -1
@@ -81,7 +81,6 @@ source "package/whetstone/Config.in"
 endmenu
 
 menu "Development tools"
-source "package/autoconf/Config.in"
 source "package/automake/Config.in"
 source "package/binutils/Config.in"
 source "package/bison/Config.in"
package/autoconf/Config.in deleted +0 -10
deleted file mode 100644
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_AUTOCONF
-	bool "autoconf"
-	# We no longer support a toolchain on the target
-	depends on BR2_DEPRECATED_SINCE_2012_11
-	select BR2_PACKAGE_PERL
-	help
-	  Extensible program for developing configure scripts.  These
-	  scripts handle all the mundane system/feature detection.
-
-	  http://www.gnu.org/software/autoconf/
package/autoconf/autoconf.mk +0 -6
@@ -11,17 +11,11 @@ AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoco
 AUTOCONF_LICENSE = GPLv3+ with exceptions
 AUTOCONF_LICENSE_FILES = COPYINGv3 COPYING.EXCEPTION
 
-AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
-		    ac_cv_prog_gnu_m4_gnu=no
-
-AUTOCONF_DEPENDENCIES = host-m4 perl
-
 HOST_AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 			ac_cv_prog_gnu_m4_gnu=no
 
 HOST_AUTOCONF_DEPENDENCIES = host-m4 host-libtool
 
-$(eval $(autotools-package))
 $(eval $(host-autotools-package))
 
 # variables used by other packages
author
#3 lore raw

PATCH v2 1/1 automake: remove deprecated target package

In reply to Thomas De Schampheleire

The automake support on target has been deprecated for more than four buildroot releases and thus can be removed. This doesn't change anything about the host automake support.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in.legacy             |   8 ++++++++
 package/Config.in            |   1 -
 package/automake/Config.in   |  11 -----------
 package/automake/automake.mk |   3 ---
 4 files changed, 8 insertions(+), 15 deletions(-)
Config.in.legacy +8 -0
@@ -101,6 +101,14 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_PACKAGE_AUTOMAKE
+	bool "automake target package has been removed"
+	select BR2_LEGACY
+	help
+	  The 'automake' target package has been removed since it has been
+	  deprecated for more than four buildroot releases.
+	  Note: the host automake still exists.
+
 config BR2_PACKAGE_AUTOCONF
 	bool "autoconf target package has been removed"
 	select BR2_LEGACY
package/Config.in +0 -1
@@ -81,7 +81,6 @@ source "package/whetstone/Config.in"
 endmenu
 
 menu "Development tools"
-source "package/automake/Config.in"
 source "package/binutils/Config.in"
 source "package/bison/Config.in"
 source "package/bsdiff/Config.in"
package/automake/Config.in deleted +0 -11
deleted file mode 100644
@@ -1,11 +0,0 @@
-config BR2_PACKAGE_AUTOMAKE
-	bool "automake"
-	# We no longer support a toolchain on the target
-	depends on BR2_DEPRECATED_SINCE_2012_11
-	select BR2_PACKAGE_AUTOCONF
-	select BR2_PACKAGE_PERL
-	help
-	  Tool for automatically generating Makefile's for input to
-	  configure scripts (made by autoconf).
-
-	  http://www.gnu.org/software/automake/
package/automake/automake.mk +0 -3
@@ -10,8 +10,6 @@ AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automa
 AUTOMAKE_LICENSE = GPLv2+
 AUTOMAKE_LICENSE_FILES = COPYING
 
-AUTOMAKE_DEPENDENCIES = host-autoconf autoconf perl
-
 HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
 
 define GTK_DOC_M4_INSTALL

@@ -26,7 +24,6 @@ endef
 HOST_AUTOMAKE_POST_INSTALL_HOOKS += GTK_DOC_M4_INSTALL
 HOST_AUTOMAKE_POST_INSTALL_HOOKS += HOST_AUTOMAKE_MAKE_ACLOCAL
 
-$(eval $(autotools-package))
 $(eval $(host-autotools-package))
 
 # variables used by other packages
author
#4 lore raw

PATCH v2 1/1 packages: remove support for documentation on target

In reply to Thomas De Schampheleire

This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: avoid separate assignments to disable documentation (ThomasP)

 Config.in                                              |  14 --------------
 Config.in.legacy                                       |   7 +++++++
 Makefile                                               |   2 --
 package/Makefile.in                                    |   2 --
 package/avahi/avahi.mk                                 |   2 +-
 package/berkeleydb/berkeleydb.mk                       |   4 ----
 package/enlightenment/enlightenment.mk                 |   2 --
 package/ffmpeg/ffmpeg.mk                               |   2 +-
 package/hdparm/hdparm.mk                               |   7 -------
 package/kmod/kmod.mk                                   |  10 +++-------
 package/libbsd/libbsd.mk                               |   6 ------
 package/logsurfer/logsurfer.mk                         |  13 -------------
 package/ncurses/ncurses.mk                             |   2 +-
 package/netsnmp/netsnmp.mk                             |   7 +++----
 package/opencv/opencv.mk                               |   4 +---
 package/perl/perl.mk                                   |   4 ----
 package/pppd/pppd.mk                                   |  10 ----------
 package/pulseaudio/pulseaudio.mk                       |   2 +-
 package/python-pygame/python-pygame.mk                 |   2 --
 package/samba/samba.mk                                 |   2 --
 package/udisks/udisks.mk                               |   3 +--
 package/vala/vala.mk                                   |  10 ++--------
 package/vim/vim.mk                                     |   2 --
 package/x11r7/xproto_xcmiscproto/xproto_xcmiscproto.mk |   2 +-
 package/x11r7/xproto_xextproto/xproto_xextproto.mk     |   2 +-
 25 files changed, 23 insertions(+), 100 deletions(-)
Config.in +0 -14
@@ -264,10 +264,6 @@ config BR2_DEPRECATED
 
 if BR2_DEPRECATED
 
-config BR2_DEPRECATED_SINCE_2012_11
-	bool
-	default y
-
 config BR2_DEPRECATED_SINCE_2013_02
 	bool
 	default y

@@ -476,16 +472,6 @@ config BR2_PREFER_STATIC_LIB
 
 	  WARNING: This is highly experimental at the moment.
 
-config BR2_HAVE_DOCUMENTATION
-	bool "documentation on the target"
-	# We no longer want to support a toolchain on the target
-	depends on BR2_DEPRECATED_SINCE_2012_11
-	help
-	  Install the documentation, including manual pages and info
-	  pages, on the target.
-	  If you say n here, your target will not contain any
-	  documentation.
-
 config BR2_PACKAGE_OVERRIDE_FILE
 	string "location of a package override file"
 	default "$(TOPDIR)/local.mk"
Config.in.legacy +7 -0
@@ -101,6 +101,13 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_HAVE_DOCUMENTATION
+	bool "support for documentation on target has been removed"
+	select BR2_LEGACY
+	help
+	  Support for documentation on target has been removed since it has
+	  been deprecated for more than four buildroot releases.
+
 config BR2_PACKAGE_AUTOMAKE
 	bool "automake target package has been removed"
 	select BR2_LEGACY
Makefile +0 -2
@@ -500,13 +500,11 @@ target-finalize:
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 	rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
 	rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
 	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
 	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
-endif
 ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
 	find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
 endif
package/Makefile.in +0 -2
@@ -332,7 +332,6 @@ ifneq ($(BR2_LARGEFILE),y)
 DISABLE_LARGEFILE= --disable-largefile
 endif
 
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 # The configure option varies, but since unknown options are ignored
 # we can pass all of them.
 DISABLE_DOCUMENTATION = \

@@ -342,7 +341,6 @@ DISABLE_DOCUMENTATION = \
 	--disable-documentation \
 	--with-xmlto=no \
 	--with-fop=no
-endif
 
 ifeq ($(BR2_INET_IPV6),y)
 DISABLE_IPV6= --enable-ipv6
package/avahi/avahi.mk +1 -1
@@ -78,7 +78,7 @@ AVAHI_CONF_OPT = --localstatedir=/var \
 		--disable-monodoc \
 		--disable-stack-protector \
 		--with-distro=none \
-		$(if $(BR2_HAVE_DOCUMENTATION),--enable,--disable)-manpages \
+		--disable-manpages \
 		$(if $(BR2_PACKAGE_AVAHI_AUTOIPD),--enable,--disable)-autoipd \
 		--with-avahi-user=default \
 		--with-avahi-group=default \
package/berkeleydb/berkeleydb.mk +0 -4
@@ -54,14 +54,10 @@ BERKELEYDB_POST_INSTALL_TARGET_HOOKS += 
 
 endif
 
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
-
 define BERKELEYDB_REMOVE_DOCS
 	rm -rf $(TARGET_DIR)/usr/docs
 endef
 
 BERKELEYDB_POST_INSTALL_TARGET_HOOKS += BERKELEYDB_REMOVE_DOCS
 
-endif
-
 $(eval $(autotools-package))
package/enlightenment/enlightenment.mk +0 -2
@@ -35,13 +35,11 @@ else
 ENLIGHTENMENT_CONF_ENV += enable_alsa=no
 endif
 
-ifeq ($(BR2_HAVE_DOCUMENTATION),)
 define ENLIGHTENMENT_REMOVE_DOCUMENTATION
 	rm -rf $(TARGET_DIR)/usr/share/enlightenment/doc/
 	rm -f $(TARGET_DIR)/usr/share/enlightenment/COPYING
 	rm -f $(TARGET_DIR)/usr/share/enlightenment/AUTHORS
 endef
 ENLIGHTENMENT_POST_INSTALL_TARGET_HOOKS += ENLIGHTENMENT_REMOVE_DOCUMENTATION
-endif
 
 $(eval $(autotools-package))
package/ffmpeg/ffmpeg.mk +1 -1
@@ -69,7 +69,7 @@ FFMPEG_CONF_OPT = \
 	--disable-vis \
 	--disable-sram \
 	--disable-symver \
-	$(if $(BR2_HAVE_DOCUMENTATION),,--disable-doc)
+	--disable-doc
 
 FFMPEG_DEPENDENCIES += $(if $(BR2_PACKAGE_LIBICONV),libiconv)
package/hdparm/hdparm.mk +0 -7
@@ -15,15 +15,8 @@ define HDPARM_BUILD_CMDS
 		LDFLAGS="$(TARGET_LDFLAGS)"
 endef
 
-ifeq ($(BR2_HAVE_DOCUMENTATION),y)
-define HDPARM_INSTALL_DOCUMENTATION
-	$(INSTALL) -D $(@D)/hdparm.8 $(TARGET_DIR)/usr/share/man/man8/hdparm.8
-endef
-endif
-
 define HDPARM_INSTALL_TARGET_CMDS
 	$(INSTALL) -D -m 0755 $(@D)/hdparm $(TARGET_DIR)/sbin/hdparm
-	$(HDPARM_INSTALL_DOCUMENTATION)
 endef
 
 $(eval $(generic-package))
package/kmod/kmod.mk +3 -7
@@ -15,17 +15,13 @@ HOST_KMOD_DEPENDENCIES = host-pkgconf
 KMOD_LICENSE = LGPLv2.1+
 KMOD_LICENSE_FILES = libkmod/COPYING
 
+KMOD_CONF_OPT += --disable-manpages
+HOST_KMOD_CONF_OPT = --disable-manpages
+
 # static linking not supported, see
 # https://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/?id=b7016153ec8
 KMOD_CONF_OPT = --disable-static --enable-shared
 
-# manpages not installed to host and needs xsltproc
-HOST_KMOD_CONF_OPT = --disable-manpages
-
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
-KMOD_CONF_OPT += --disable-manpages
-endif
-
 ifeq ($(BR2_PACKAGE_ZLIB),y)
 KMOD_DEPENDENCIES += zlib
 KMOD_CONF_OPT += --with-zlib
package/libbsd/libbsd.mk +0 -6
@@ -9,12 +9,6 @@ LIBBSD_SITE            = http://libbsd.f
 LIBBSD_LICENSE         = BSD-3c MIT
 LIBBSD_LICENSE_FILES   = COPYING
 
-# man-pages are BSD-4c, so that license only matters
-# if doc is kept in the target rootfs
-ifeq ($(BR2_HAVE_DOCUMENTATION),y)
-LIBBSD_LICENSE        += (libraries), BSD-4c (documentation)
-endif
-
 LIBBSD_INSTALL_STAGING = YES
 
 $(eval $(autotools-package))
package/logsurfer/logsurfer.mk +0 -13
@@ -12,17 +12,4 @@ define LOGSURFER_INSTALL_TARGET_CMDS
 		$(TARGET_DIR)/usr/bin/logsurfer
 endef
 
-ifeq ($(BR2_HAVE_DOCUMENTATION),y)
-
-define LOGSURFER_INSTALL_TARGET_MAN
-	$(INSTALL) -D -m 0644 $(@D)/man/logsurfer.1 \
-		$(TARGET_DIR)/usr/man/man1/logsurfer.1
-	$(INSTALL) -D -m 0644 $(@D)/man/logsurfer.conf.4 \
-		$(TARGET_DIR)/usr/man/man4/logsurfer.conf.4
-endef
-
-LOGSURFER_POST_INSTALL_TARGET_HOOKS += LOGSURFER_INSTALL_TARGET_MAN
-
-endif
-
 $(eval $(autotools-package))
package/ncurses/ncurses.mk +1 -1
@@ -29,7 +29,7 @@ NCURSES_CONF_OPT = \
 	--enable-overwrite \
 	--enable-pc-files \
 	$(if $(BR2_PACKAGE_NCURSES_TARGET_PROGS),,--without-progs) \
-	$(if $(BR2_HAVE_DOCUMENTATION),,--without-manpages)
+	--without-manpages
 
 # Install after busybox for the full-blown versions
 ifeq ($(BR2_PACKAGE_BUSYBOX),y)
package/netsnmp/netsnmp.mk +3 -4
@@ -22,7 +22,8 @@ NETSNMP_CONF_OPT = --with-persistent-dir
 		--with-sys-location="Unknown" \
 		--with-mib-modules="$(call qstrip,$(BR2_PACKAGE_NETSNMP_WITH_MIB_MODULES))" \
 		--with-out-mib-modules="$(call qstrip,$(BR2_PACKAGE_NETSNMP_WITHOUT_MIB_MODULES))" \
-		--with-out-transports="Unix"
+		--with-out-transports="Unix" \
+		--disable-manuals
 NETSNMP_MAKE = $(MAKE1)
 NETSNMP_CONFIG_SCRIPTS = net-snmp-config
 

@@ -44,9 +45,7 @@ else
 endif
 
 # Docs
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
-	NETSNMP_CONF_OPT += --disable-manuals
-endif
+NETSNMP_CONF_OPT += --disable-manuals
 
 ifneq ($(BR2_PACKAGE_NETSNMP_ENABLE_MIBS),y)
 	NETSNMP_CONF_OPT += --disable-mib-loading
package/opencv/opencv.mk +1 -3
@@ -12,7 +12,7 @@ OPENCV_INSTALL_STAGING = YES
 OPENCV_CONF_OPT += \
 	-DCMAKE_BUILD_TYPE=$(if $(BR2_ENABLE_DEBUG),Debug,Release)   \
 	-DBUILD_WITH_STATIC_CRT=OFF                                  \
-	-DBUILD_DOCS=$(if $(BR2_HAVE_DOCUMENTATION),ON,OFF)          \
+	-DBUILD_DOCS=OFF                                             \
 	-DBUILD_EXAMPLES=OFF                                         \
 	-DBUILD_PACKAGE=OFF                                          \
 	-DBUILD_TESTS=$(if $(BR2_PACKAGE_OPENCV_BUILD_TESTS),ON,OFF) \

@@ -161,12 +161,10 @@ OPENCV_CONF_OPT += -DWITH_V4L=OFF
 endif
 
 # Installation hooks:
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 define OPENCV_CLEAN_INSTALL_DOC
 	$(RM) -fr $(TARGET_DIR)/usr/share/OpenCV/doc
 endef
 OPENCV_POST_INSTALL_TARGET_HOOKS += OPENCV_CLEAN_INSTALL_DOC
-endif
 
 define OPENCV_CLEAN_INSTALL_CMAKE
 	$(RM) -f $(TARGET_DIR)/usr/share/OpenCV/OpenCVConfig*.cmake
package/perl/perl.mk +0 -4
@@ -91,10 +91,6 @@ define PERL_INSTALL_STAGING_CMDS
 endef
 
 PERL_INSTALL_TARGET_GOALS = install.perl
-ifeq ($(BR2_HAVE_DOCUMENTATION),y)
-PERL_INSTALL_TARGET_GOALS += install.man
-endif
-
 
 define PERL_INSTALL_TARGET_CMDS
 	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" $(PERL_INSTALL_TARGET_GOALS)
package/pppd/pppd.mk +0 -10
@@ -12,8 +12,6 @@ PPPD_LICENSE_FILES = pppd/tdb.c pppd/plu
 	pppdump/bsd-comp.c pppd/ccp.c pppd/plugins/passprompt.c
 
 PPPD_TARGET_BINS = chat pppd pppdump pppstats
-PPPD_MANPAGES = $(if $(BR2_HAVE_DOCUMENTATION),chat pppd pppdump pppstats)
-PPPD_RADIUS_MANPAGES = $(if $(BR2_HAVE_DOCUMENTATION),pppd-radattr pppd-radius)
 PPPD_RADIUS_CONF = dictionary dictionary.ascend dictionary.compat \
 			dictionary.merit dictionary.microsoft \
 			issue port-id-map realms server radiusclient.conf

@@ -65,10 +63,6 @@ define PPPD_INSTALL_RADIUS
 		$(TARGET_DIR)/etc/ppp/radius/radiusclient.conf
 	$(SED) 's:/etc/radiusclient:/etc/ppp/radius:g' \
 		$(TARGET_DIR)/etc/ppp/radius/*
-	for m in $(PPPD_RADIUS_MANPAGES); do \
-		$(INSTALL) -m 644 -D $(PPPD_DIR)/pppd/plugins/radius/$$m.8 \
-			$(TARGET_DIR)/usr/share/man/man8/$$m.8; \
-	done
 endef
 endif
 

@@ -96,10 +90,6 @@ define PPPD_INSTALL_TARGET_CMDS
 	$(INSTALL) -D $(PPPD_DIR)/pppd/plugins/pppol2tp/pppol2tp.so \
 		$(TARGET_DIR)/usr/lib/pppd/$(PPPD_VERSION)/pppol2tp.so
 	$(PPPD_INSTALL_RADIUS)
-	for m in $(PPPD_MANPAGES); do \
-		$(INSTALL) -m 644 -D $(PPPD_DIR)/$$m/$$m.8 \
-			$(TARGET_DIR)/usr/share/man/man8/$$m.8; \
-	done
 endef
 
 $(eval $(generic-package))
package/pulseaudio/pulseaudio.mk +1 -1
@@ -15,7 +15,7 @@ PULSEAUDIO_CONF_OPT = \
 	--disable-default-build-tests \
 	--disable-legacy-runtime-dir \
 	--disable-legacy-database-entry-format \
-	$(if $(BR2_HAVE_DOCUMENTATION),,--disable-manpages)
+	--disable-manpages
 
 PULSEAUDIO_DEPENDENCIES = \
 	host-pkgconf libtool json-c libsndfile speex host-intltool \
package/python-pygame/python-pygame.mk +0 -2
@@ -82,13 +82,11 @@ define PYTHON_PYGAME_CONFIGURE_CMDS
 	$(PYTHON_PYGAME_UNCONFIGURE_SCRAP)
 endef
 
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 define PYTHON_PYGAME_REMOVE_DOC
 	rm -rf $(TARGET_DIR)/usr/lib/python*/site-packages/pygame/docs
 endef
 
 PYTHON_PYGAME_POST_INSTALL_TARGET_HOOKS += PYTHON_PYGAME_REMOVE_DOC
-endif
 
 define PYTHON_PYGAME_REMOVE_TESTS
 	rm -rf $(TARGET_DIR)/usr/lib/python*/site-packages/pygame/tests
package/samba/samba.mk +0 -2
@@ -157,10 +157,8 @@ endif
 SAMBA_CONF_OPT += CFLAGS="$(TARGET_CFLAGS) -DMAX_DEBUG_LEVEL=$(BR2_PACKAGE_SAMBA_MAX_DEBUGLEVEL)"
 
 ifeq ($(BR2_PACKAGE_SAMBA_SWAT),y)
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 SAMBA_POST_INSTALL_TARGET_HOOKS += SAMBA_REMOVE_SWAT_DOCUMENTATION
 endif
-endif
 
 define SAMBA_INSTALL_INITSCRIPTS_CONFIG
 	# install start/stop script
package/udisks/udisks.mk +1 -2
@@ -20,8 +20,7 @@ UDISKS_DEPENDENCIES = 	\
 	lvm2		\
 	libatasmart
 
-UDISKS_CONF_OPT = --disable-remote-access \
-	$(if $(BR2_HAVE_DOCUMENTATION),,--disable-man-pages)
+UDISKS_CONF_OPT = --disable-remote-access --disable-man-pages
 
 ifeq ($(BR2_PACKAGE_UDISKS_LVM2),y)
 UDISKS_CONF_OPT += --enable-lvm2
package/vala/vala.mk +2 -8
@@ -15,15 +15,9 @@ VALA_LICENSE_FILES = COPYING
 VALA_DEPENDENCIES = host-flex host-bison libglib2 \
 		$(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext)
 
-# If we want the documentation, then xsltproc is needed. If we don't
-# want the documentation, force Vala to not use the host xsltproc even
-# if available, because it may or may not work with Vala documentation
-# (some versions of xsltproc segfault)
-ifeq ($(BR2_HAVE_DOCUMENTATION),y)
-VALA_DEPENDENCIES += host-libxslt
-else
+# Force Vala to not use the host xsltproc even if available, because it may or
+# may not work with Vala documentation (some versions of xsltproc segfault)
 VALA_CONF_ENV = ac_cv_path_XSLTPROC=:
-endif
 
 HOST_VALA_DEPENDENCIES = host-flex host-libglib2
 # Yes, the autoconf script understands ':' as "xsltproc is not
package/vim/vim.mk +0 -2
@@ -42,9 +42,7 @@ endef
 
 ifeq ($(BR2_PACKAGE_VIM_RUNTIME),y)
 VIM_POST_INSTALL_TARGET_HOOKS += VIM_INSTALL_RUNTIME_CMDS
-ifneq ($(BR2_HAVE_DOCUMENTATION),y)
 VIM_POST_INSTALL_TARGET_HOOKS += VIM_REMOVE_DOCS
 endif
-endif
 
 $(eval $(autotools-package))
package/x11r7/xproto_xcmiscproto/xproto_xcmiscproto.mk +1 -1
@@ -10,7 +10,7 @@ XPROTO_XCMISCPROTO_SITE = http://xorg.fr
 XPROTO_XCMISCPROTO_LICENSE = MIT
 XPROTO_XCMISCPROTO_LICENSE_FILES = COPYING
 XPROTO_XCMISCPROTO_INSTALL_STAGING = YES
-XPROTO_XCMISCPROTO_CONF_OPT = $(if $(BR2_HAVE_DOCUMENTATION),,--disable-specs)
+XPROTO_XCMISCPROTO_CONF_OPT = --disable-specs
 HOST_XPROTO_XCMISCPROTO_CONF_OPT = --disable-specs
 
 $(eval $(autotools-package))
package/x11r7/xproto_xextproto/xproto_xextproto.mk +1 -1
@@ -10,7 +10,7 @@ XPROTO_XEXTPROTO_SITE = http://xorg.free
 XPROTO_XEXTPROTO_LICENSE = MIT
 XPROTO_XEXTPROTO_LICENSE_FILES = COPYING
 XPROTO_XEXTPROTO_INSTALL_STAGING = YES
-XPROTO_XEXTPROTO_CONF_OPT = $(if $(BR2_HAVE_DOCUMENTATION),,--disable-specs)
+XPROTO_XEXTPROTO_CONF_OPT = --disable-specs
 HOST_XPROTO_XEXTPROTO_CONF_OPT = --disable-specs
 
 $(eval $(autotools-package))
author
#5 lore raw

PATCH v2 1/1 ccache: remove deprecated target package

In reply to Thomas De Schampheleire

The ccache target package has been deprecated since 2013.02 and thus can be removed in 2014.02. This does not change anything about host ccache (used for speeding up builds).

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in.legacy         |   8 ++++++++
 package/Config.in        |   1 -
 package/ccache/Config.in |  12 ------------
 package/ccache/ccache.mk |   1 -
 4 files changed, 8 insertions(+), 14 deletions(-)
Config.in.legacy +8 -0
@@ -101,6 +101,14 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_PACKAGE_CCACHE
+	bool "ccache target package has been removed"
+	select BR2_LEGACY
+	help
+	  The 'ccache' target package has been removed since it has been
+	  deprecated for more than four buildroot releases.
+	  Note: using ccache for speeding up builds is still supported.
+
 config BR2_HAVE_DOCUMENTATION
 	bool "support for documentation on target has been removed"
 	select BR2_LEGACY
package/Config.in +0 -1
@@ -85,7 +85,6 @@ source "package/binutils/Config.in"
 source "package/bison/Config.in"
 source "package/bsdiff/Config.in"
 source "package/bustle/Config.in"
-source "package/ccache/Config.in"
 source "package/cvs/Config.in"
 if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 source "package/diffutils/Config.in"
package/ccache/Config.in deleted +0 -12
deleted file mode 100644
@@ -1,12 +0,0 @@
-config BR2_PACKAGE_CCACHE
-	bool "ccache"
-	# needs fork()
-	depends on BR2_USE_MMU
-	# We no longer support a toolchain on the target
-	depends on BR2_DEPRECATED_SINCE_2013_02
-	help
-	  ccache is a compiler cache. It speeds up recompilation by
-	  caching previous compilations and detecting when the same
-	  compilation is being done again
-
-	  http://ccache.samba.org
package/ccache/ccache.mk +0 -1
@@ -38,7 +38,6 @@ endef
 HOST_CCACHE_POST_CONFIGURE_HOOKS += \
 	HOST_CCACHE_PATCH_CONFIGURATION
 
-$(eval $(autotools-package))
 $(eval $(host-autotools-package))
 
 ifeq ($(BR2_CCACHE),y)
author
#6 lore raw

PATCH v2 1/1 gdb: remove deprecated versions 7.2.x and 7.3.x

In reply to Thomas De Schampheleire

Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in.legacy           |  18 ++++++++++++++++++
 package/gdb/Config.in.host |  12 ------------
 2 files changed, 18 insertions(+), 12 deletions(-)
Config.in.legacy +18 -0
@@ -101,6 +101,24 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_GDB_VERSION_7_2
+	bool "gdb 7.2.x is no longer supported"
+	select BR2_GDB_VERSION_7_5
+	select BR2_LEGACY
+	help
+	  Version 7.2.x of gdb has been deprecated for more than four
+	  buildroot releases and is now removed. As an alternative, gdb
+	  7.5.x has been automatically selected in your configuration.
+
+config BR2_GDB_VERSION_7_3
+	bool "gdb 7.3.x is no longer supported"
+	select BR2_GDB_VERSION_7_5
+	select BR2_LEGACY
+	help
+	  Version 7.3.x of gdb has been deprecated for more than four
+	  buildroot releases and is now removed. As an alternative, gdb
+	  7.5.x has been automatically selected in your configuration.
+
 config BR2_PACKAGE_CCACHE
 	bool "ccache target package has been removed"
 	select BR2_LEGACY
package/gdb/Config.in.host +0 -12
@@ -31,16 +31,6 @@ choice
 		depends on BR2_avr32
 		bool "gdb 6.7.1-avr32-2.1.5"
 
-	config BR2_GDB_VERSION_7_2
-		bool "gdb 7.2.x"
-		depends on !BR2_bfin
-		depends on BR2_DEPRECATED_SINCE_2013_02
-
-	config BR2_GDB_VERSION_7_3
-		bool "gdb 7.3.x"
-		depends on !BR2_bfin
-		depends on BR2_DEPRECATED_SINCE_2013_02
-
 	config BR2_GDB_VERSION_7_4
 		bool "gdb 7.4.x"
 		depends on !BR2_bfin

@@ -55,8 +45,6 @@ config BR2_GDB_VERSION
 	string
 	default "6.6a"     if BR2_GDB_VERSION_6_6
 	default "6.7.1-avr32-2.1.5" if BR2_GDB_VERSION_6_7_1_AVR32_2_1_5
-	default "7.2a"     if BR2_GDB_VERSION_7_2
-	default "7.3.1"    if BR2_GDB_VERSION_7_3
 	default "7.4.1"    if BR2_GDB_VERSION_7_4
 	default "7.5.1"    if BR2_GDB_VERSION_7_5
 	default "f25a1952afd054205f9471e449c1f7ca5b271b7c" if BR2_arc
author
#7 lore raw

PATCH v2 1/1 kernel-headers: remove deprecated versions 3.1, 3.3, 3.5

In reply to Thomas De Schampheleire

The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6, respectively.

Additionally, this patch removes the now unused symbol BR2_DEPRECATED_SINCE_2013_02.

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: no changes

 Config.in                            |   4 ----
 Config.in.legacy                     |  30 ++++++++++++++++++++++++++++++
 package/linux-headers/Config.in.host |  15 ---------------
 3 files changed, 30 insertions(+), 19 deletions(-)
Config.in +0 -4
@@ -264,10 +264,6 @@ config BR2_DEPRECATED
 
 if BR2_DEPRECATED
 
-config BR2_DEPRECATED_SINCE_2013_02
-	bool
-	default y
-
 config BR2_DEPRECATED_SINCE_2013_05
 	bool
 	default y
Config.in.legacy +30 -0
@@ -101,6 +101,36 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
+config BR2_KERNEL_HEADERS_3_1
+	bool "kernel headers version 3.1.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_2
+	select BR2_LEGACY
+	help
+	  Version 3.1.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.2.x of the headers have been
+	  automatically selected in your configuration.
+
+config BR2_KERNEL_HEADERS_3_3
+	bool "kernel headers version 3.3.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_4
+	select BR2_LEGACY
+	help
+	  Version 3.3.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.4.x of the headers have been
+	  automatically selected in your configuration.
+
+config BR2_KERNEL_HEADERS_3_5
+	bool "kernel headers version 3.5.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_6
+	select BR2_LEGACY
+	help
+	  Version 3.5.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.6.x of the headers have been
+	  automatically selected in your configuration.
+
 config BR2_GDB_VERSION_7_2
 	bool "gdb 7.2.x is no longer supported"
 	select BR2_GDB_VERSION_7_5
package/linux-headers/Config.in.host +0 -15
@@ -18,26 +18,14 @@ choice
 		bool "Linux 3.0.x kernel headers"
 		depends on !BR2_arc
 
-	config BR2_KERNEL_HEADERS_3_1
-		bool "Linux 3.1.x kernel headers"
-		depends on BR2_DEPRECATED_SINCE_2013_02 && !BR2_arc
-
 	config BR2_KERNEL_HEADERS_3_2
 		bool "Linux 3.2.x kernel headers"
 		depends on !BR2_arc
 
-	config BR2_KERNEL_HEADERS_3_3
-		bool "Linux 3.3.x kernel headers"
-		depends on BR2_DEPRECATED_SINCE_2013_02 && !BR2_arc
-
 	config BR2_KERNEL_HEADERS_3_4
 		bool "Linux 3.4.x kernel headers"
 		depends on !BR2_arc
 
-	config BR2_KERNEL_HEADERS_3_5
-		bool "Linux 3.5.x kernel headers"
-		depends on BR2_DEPRECATED_SINCE_2013_02 && !BR2_arc
-
 	config BR2_KERNEL_HEADERS_3_6
 		bool "Linux 3.6.x kernel headers"
 		depends on BR2_DEPRECATED_SINCE_2013_05 && !BR2_arc

@@ -83,11 +71,8 @@ config BR2_DEFAULT_KERNEL_VERSION
 config BR2_DEFAULT_KERNEL_HEADERS
 	string
 	default "3.0.101"	if BR2_KERNEL_HEADERS_3_0
-	default "3.1.10"	if BR2_KERNEL_HEADERS_3_1
 	default "3.2.54"	if BR2_KERNEL_HEADERS_3_2
-	default "3.3.8"		if BR2_KERNEL_HEADERS_3_3
 	default "3.4.78"	if BR2_KERNEL_HEADERS_3_4
-	default "3.5.7"		if BR2_KERNEL_HEADERS_3_5
 	default "3.6.11"	if BR2_KERNEL_HEADERS_3_6
 	default "3.7.10"	if BR2_KERNEL_HEADERS_3_7
 	default "3.8.13"	if BR2_KERNEL_HEADERS_3_8
author
#8 lore raw

PATCH v2 1/1 infra: remove separate definition of DISABLE_DOCUMENTATION

In reply to Thomas De Schampheleire

Since we now always disable documentation on target, there is no need to have a separate variable DISABLE_DOCUMENTATION anymore.

Suggested-by Thomas Petazzoni <[email protected]>
Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2: new patch

Note: I'm not 100% convinced by this patch, but I post it to ignite the discussion. The advantage of the separate variable is the grouping of the options. Without it, it is not so clear that --with-fop is related to documentation, unless you already know what fop is. Also, there is no clear place to put the comment regarding passing multiple options, so I just removed it (losing some information).
Both problems could be solved by keeping the variable but moving it to autotools.mk, but this is then no longer consistent with the other DISABLE_xxx variables.

package/Makefile.in +0 -10
@@ -332,16 +332,6 @@ ifneq ($(BR2_LARGEFILE),y)
 DISABLE_LARGEFILE= --disable-largefile
 endif
 
-# The configure option varies, but since unknown options are ignored
-# we can pass all of them.
-DISABLE_DOCUMENTATION = \
-	--disable-gtk-doc \
-	--disable-doc \
-	--disable-docs \
-	--disable-documentation \
-	--with-xmlto=no \
-	--with-fop=no
-
 ifeq ($(BR2_INET_IPV6),y)
 DISABLE_IPV6= --enable-ipv6
 else
package/pkg-autotools.mk +6 -1
@@ -110,7 +110,12 @@ define $(2)_CONFIGURE_CMDS
 		--exec-prefix=/usr \
 		--sysconfdir=/etc \
 		--program-prefix="" \
-		$$(DISABLE_DOCUMENTATION) \
+		--disable-gtk-doc \
+		--disable-doc \
+		--disable-docs \
+		--disable-documentation \
+		--with-xmlto=no \
+		--with-fop=no
 		$$(DISABLE_NLS) \
 		$$(DISABLE_LARGEFILE) \
 		$$(DISABLE_IPV6) \
#9 lore raw

PATCH v2 1/1 Remove remaining deprecated packages for 2014.02

In reply to Thomas De Schampheleire
Quoted 11 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas De Schampheleire <[email protected]> writes:

This patch series removes all deprecated packages/features that we are allowed to remove for 2014.02 (deprecated since 2013.02 or earlier).

Signed-off-by Thomas De Schampheleire <[email protected]>

---
v2:
- update BR2_HAVE_DOCUMENTATION patch with comments from ThomasP.
- new tentative patch removing DISABLE_DOCUMENTATION

Committed series, thanks.

Signature · 1 line
Bye, Peter Korsgaard