device tree changes for omaps for v5.2

From: "Tony Lindgren" <[email protected]>

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/dt-signed

for you to fetch changes up to bcbb63b80284af0061ac44fe944d31a8482d2b8a:

ARM: dts: dra7: Separate AM57 dtsi files (2019-04-12 09:57:07 -0700)

----------------------------------------------------------------
Devicetree changes for omap variants

This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810.

We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss.

----------------------------------------------------------------
Andrew F. Davis (2):
ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
ARM: dts: omap2420-n810: Use new CODEC reset pin name

Kabir Sahane (1):
ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on

Kishon Vijay Abraham I (1):
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode

Mike Erdahl (1):
ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory

Roger Quadros (2):
dt-binding: arm: omap: Add information for AM5748
ARM: dts: dra7: Separate AM57 dtsi files

 .../devicetree/bindings/arm/omap/omap.txt          |  6 ++++
 arch/arm/boot/dts/am43x-epos-evm.dts               | 11 ++++++++
 arch/arm/boot/dts/am5718.dtsi                      | 32 +++++++++++++++++++++
 arch/arm/boot/dts/am571x-idk.dts                   |  2 +-
 arch/arm/boot/dts/am5728.dtsi                      | 33 ++++++++++++++++++++++
 arch/arm/boot/dts/am572x-idk.dts                   |  5 ++--
 arch/arm/boot/dts/am5748.dtsi                      | 33 ++++++++++++++++++++++
 arch/arm/boot/dts/am574x-idk.dts                   |  4 +--
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi    |  2 +-
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts          |  2 +-
 arch/arm/boot/dts/dra7-l4.dtsi                     |  6 ++--
 arch/arm/boot/dts/dra7.dtsi                        |  2 ++
 arch/arm/boot/dts/omap2420-n810.dts                |  2 +-
 13 files changed, 128 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/boot/dts/am5718.dtsi
 create mode 100644 arch/arm/boot/dts/am5728.dtsi
 create mode 100644 arch/arm/boot/dts/am5748.dtsi

From: "Tony Lindgren" <[email protected]>

The following changes since commit d59b60564cbfe77d85c2f51b29941d8ed14984d1:

bus: ti-sysc: Add generic enable/disable functions (2019-04-09 08:58:48 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/dt-ti-sysc-signed

for you to fetch changes up to b2770b2d6f1b4d33e919fc2a9ccf536efedc1e40:

ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 (2019-04-09 09:00:54 -0700)

----------------------------------------------------------------
Devicetree changes for omap4 and 5 l4 abe interconnect

This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place.

This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late.

----------------------------------------------------------------
Tony Lindgren (3):
ARM: dts: Add common mcpdm dts file for omap4
ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4
ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5

 arch/arm/boot/dts/omap4-duovero.dtsi      |  21 +-
 arch/arm/boot/dts/omap4-l4-abe.dtsi       | 501 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4-mcpdm.dtsi        |  44 +++
 arch/arm/boot/dts/omap4-panda-common.dtsi |  21 +-
 arch/arm/boot/dts/omap4-sdp.dts           |  21 +-
 arch/arm/boot/dts/omap4-var-som-om44.dtsi |  21 +-
 arch/arm/boot/dts/omap4.dtsi              | 192 +-----------
 arch/arm/boot/dts/omap5-board-common.dtsi |   8 +-
 arch/arm/boot/dts/omap5-l4-abe.dtsi       | 447 ++++++++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi              | 115 +------
 10 files changed, 1011 insertions(+), 380 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap4-l4-abe.dtsi
 create mode 100644 arch/arm/boot/dts/omap4-mcpdm.dtsi
 create mode 100644 arch/arm/boot/dts/omap5-l4-abe.dtsi

Merged, thanks!

-Olof

Merged, thanks!

-Olof