Skip to contentSkip to conversation

LVM Snapshot create trouble

linux-lvm Tim Cary 1 participant 1 message Mar 6, 2006

lore
Share & tools
lore

Tim Cary

author
#0 lore raw

Hello,

This post relates to an issue posted by Steffen Plotner back in December. See
https://www.redhat.com/archives/linux-lvm/2005-December/msg00105.html
I am experiencing the same type of problem.

On 2.6.13-1.1532_FC4:
When a lot of write activity is going on my server goes into a dead lock trying to create a snapshot. The write activity is from creating the snap itself, as disk i/o normally is not intense on this server.

lvm_snap_copy> source: /dev/vg_scsi_0/lv_os_root lvm_snap_copy> target: /dev/vg_scsi_0/lv_os_root_alt lvm_snap_create> source: /dev/vg_scsi_0/lv_os_root lvm_snap_create> target: snap
lvm_snap_create> snap_space: 15%
lvm_snap_create> source uuid: Jm4sGV-fGt5-XRHl-ESds-AERY-pZtq-GOg8Tu lvm_snap_create> short name: lv_os_root
lvm_snap_create> size: 8388608000 bytes
lvm_snap_create> snap_size: 1200 Mb
lvm_snap_create> lvcreate -s -L1200 -n lv_os_root_snap /dev/vg_scsi_0/lv_os_root
Rounding up size to full physical extent 1.19 GB

At this point no I/O was possible. No ssh, no x terminal, no logging into the console, nothing at all! Disk activity was null. In VNC you could see the load window all black filled. I had to push the reset button on the server.

This is on some very decent hardware- 3Ghz Xenon, 4Gb RAM, 7200RPM SCSI Hardware raid controller drives.

When I run the same command on a different system, same hardware (but a bit less loaded CPU wise), I did not yet have this problem, however I have been able to reproduce this same type of issue, it seems when there is continuous i/o, one can not remove the snapshot until all i/o ceases.

Can anyone reproduce this problem? Now there are at least two of us with the same exact issue.

Tim