sound: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".
To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time.
We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id.
We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.
Thanks,
Kay
From: Kay Sievers <[email protected]>
Subject: sound: struct device - replace bus_id with dev_name(), dev_set_name()
---
sound/pci/ac97/ac97_codec.c +3 -3
@@ -1927,9 +1927,9 @@ static int snd_ac97_dev_register(struct snd_device *device) ac97->dev.bus = &ac97_bus_type; ac97->dev.parent = ac97->bus->card->dev; ac97->dev.release = ac97_device_release; -snprintf (ac97->dev.bus_id,BUS_ID_SIZE ,"%d-%d:%s" , - ac97->bus->card->number, ac97->num, -snd_ac97_get_short_name (ac97)); +dev_set_name (&ac97->dev,"%d-%d:%s" , + ac97->bus->card->number, ac97->num, +snd_ac97_get_short_name (ac97));if ((err =device_register (&ac97->dev)) <0 ) {snd_printk (KERN_ERR "Can't register ac97 bus\n" ); ac97->dev.bus =NULL ;
Takashi Iwai
AppliedAt Thu, 30 Oct 2008 02:27:20 +0100,
Quoted 26 lines · Kay Sievers
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".
To set and read the device name
dev_name(dev)anddev_set_name(dev)must be used. If your code uses static kobjects, which it shouldn't do, "const char*init_name" can be used to statically provide the name the registered device should have. At registration time, theinit_namefield is cleared, to enforce the use ofdev_name(dev)to access the device name at a later time.We need to get rid of all occurrences of
bus_idin the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences ofbus_id.We want to submit a patch to -next, which will remove
bus_idfrom "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.Thanks,
Kay
Quoted 6 lines
From: Kay Sievers <[email protected]>
Subject: sound: struct device - replacebus_idwithdev_name(),dev_set_name()CC Takashi Iwai <[email protected]>Signed-off-by Kay Sievers <[email protected]>
Thanks, applied now to sound tree.
Takashi
Quoted 22 lines
---
sound/pci/ac97/ac97_codec.c +3
-3@@ -1927,9 +1927,9 @@ static int snd_ac97_dev_register(struct snd_device *device) ac97->dev.bus = &ac97_bus_type; ac97->dev.parent = ac97->bus->card->dev; ac97->dev.release = ac97_device_release; -snprintf (ac97->dev.bus_id,BUS_ID_SIZE ,"%d-%d:%s" , - ac97->bus->card->number, ac97->num, -snd_ac97_get_short_name (ac97)); +dev_set_name (&ac97->dev,"%d-%d:%s" , + ac97->bus->card->number, ac97->num, +snd_ac97_get_short_name (ac97));if ((err =device_register (&ac97->dev)) <0 ) {snd_printk (KERN_ERR "Can't register ac97 bus\n" ); ac97->dev.bus =NULL ;