Skip to contentSkip to conversation

ALSA: line6: add hw monitor volume control for POD HD500

PATCH Superseded Vasily Khoruzhick 2 participants 4 messages May 23, 2020 – May 24, 2020 Sound

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ALSA: line6: add hw monitor volume control for POD HD500

Add hw monitor volume control for POD HD500. The same change may work for HD500X but I don't have it to test.

---
v2: clamp volume value to [0, ARRAY_SIZE() -1] in
podhd_set_monitor_level()

 sound/usb/line6/driver.c |   3 +-
 sound/usb/line6/driver.h |   4 ++
 sound/usb/line6/podhd.c  | 124 ++++++++++++++++++++++++++++++++++++++-
 3 files changed, 129 insertions(+), 2 deletions(-)
sound/usb/line6/driver.c +2 -1
index 7629116f570e..597a36c0a51d 100644
@@ -97,7 +97,7 @@ static void line6_stop_listen(struct usb_line6 *line6)
 /*
 	Send raw message in pieces of wMaxPacketSize bytes.
 */
-static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 				  int size)
 {
 	int i, done = 0;
@@ -132,6 +132,7 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 
 	return done;
 }
+EXPORT_SYMBOL(line6_send_raw_message);
 
 /*
 	Notification of completion of asynchronous request transmission.
sound/usb/line6/driver.h +4 -0
index 1a4e3700c80c..62c686bed0ca 100644
@@ -108,6 +108,8 @@ enum {
 	LINE6_CAP_CONTROL_MIDI = 1 << 4,
 	/* device provides low-level information */
 	LINE6_CAP_CONTROL_INFO = 1 << 5,
+	/* device provides hardware monitoring volume control */
+	LINE6_CAP_HWMON_CTL =	1 << 6,
 };
 
 /*
@@ -185,6 +187,8 @@ extern int line6_read_data(struct usb_line6 *line6, unsigned address,
 			   void *data, unsigned datalen);
 extern int line6_read_serial_number(struct usb_line6 *line6,
 				    u32 *serial_number);
+extern int line6_send_raw_message(struct usb_line6 *line6,
+					const char *buffer, int size);
 extern int line6_send_raw_message_async(struct usb_line6 *line6,
 					const char *buffer, int size);
 extern int line6_send_sysex_message(struct usb_line6 *line6,
sound/usb/line6/podhd.c +123 -1

154 lines not on this page · raw message

Signature · 1 line
2.26.2
#1 lore raw
Quoted 8 lines · Vasily Khoruzhick

Add hw monitor volume control for POD HD500. The same change may work for HD500X but I don't have it to test.

---
v2: clamp volume value to [0, ARRAY_SIZE() -1] in
podhd_set_monitor_level()

Thanks for the patch.
The basic implementation looks good, but I see a few issues. Below are the comments:

sound/usb/line6/driver.c static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, · line 135

Quoted 5 lines
sound/usb/line6/driver.c +1 -0
@@ -132,6 +132,7 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 
 	return done;
 }
+EXPORT_SYMBOL(line6_send_raw_message);

Let's use EXPORT_SYMBOL_GPL() instead.

Quoted 8 lines
sound/usb/line6/podhd.c +8 -0
+static const unsigned int float_zero_to_one_lookup[] = {
+0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD,
+0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE,
+0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B,
+0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F,
+0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1,
+0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333,
+0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85,

sound/usb/line6/podhd.c static void podhd_disconnect(struct usb_line6 *line6) · line 274

Quoted 10 lines
sound/usb/line6/podhd.c +10 -0
+0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7,
+0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14,
+0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D,
+0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666,
+0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F,
+0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8,
+0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1,
+0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A,
+0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333,
+0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000

Just nitpick: better to align with lower hex letters (a-f).

Quoted 12 lines
sound/usb/line6/podhd.c +12 -0
+};
+
+static void podhd_set_monitor_level(struct usb_line6_podhd *podhd, int value)
+{
+	unsigned int fl;
+	static const unsigned char msg[16] = {
+		/* Chunk is 0xc bytes (without first word) */
+		0x0c, 0x00,
+		/* First chunk in the message */
+		0x01, 0x00,
+		/* Message size is 2 4-byte words */
+		0x02, 0x00,

sound/usb/line6/podhd.c static void podhd_disconnect(struct usb_line6 *line6) · line 296

Quoted 10 lines
sound/usb/line6/podhd.c +10 -0
+		/* Unknown */
+		0x04, 0x41,
+		/* Unknown */
+		0x04, 0x00, 0x13, 0x00,
+		/* Volume, LE float32, 0.0 - 1.0 */
+		0x00, 0x00, 0x00, 0x00
+	};
+	unsigned char *buf;
+
+	buf = kmalloc(sizeof(msg), GFP_ATOMIC);

Is this function called from the irq context like the urb callback? I saw that it's called from the mixer put callback, and it's in the normal sleepable context, hence GFP_KERNEL can be used safely.

thanks,

Takashi

#2 lore raw
Quoted 6 lines · Takashi Iwai

Thanks for the patch.
The basic implementation looks good, but I see a few issues.

Quoted 1 line

+EXPORT_SYMBOL(line6_send_raw_message);

Let's use EXPORT_SYMBOL_GPL() instead.

Sure, will do.

Quoted 19 lines
Quoted 10 lines

+static const unsigned int float_zero_to_one_lookup[] = { +0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, +0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, +0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, +0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, +0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, +0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, +0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, +0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, +0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14,

Quoted 8 lines

+0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, +0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, +0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, +0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, +0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, +0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, +0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, +0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000

Quoted 1 line

Just nitpick: better to align with lower hex letters (a-f).

Sorry, I don't really understand what you meant here. Could you elaborate?

Quoted 5 lines
Quoted 1 line

+ buf = kmalloc(sizeof(msg), GFP_ATOMIC);

Is this function called from the irq context like the urb callback? I saw that it's called from the mixer put callback, and it's in the normal sleepable context, hence GFP_KERNEL can be used safely.

It's also called from podhd_init() to set initial value but I assume it can sleep there. I'll change it to GFP_KERNEL.

Thanks for review!

Regards,
Vasily

#3 lore raw
Quoted 20 lines · Vasily Khoruzhick
Quoted 20 lines
Quoted 19 lines

+static const unsigned int float_zero_to_one_lookup[] = { +0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, +0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, +0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, +0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, +0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, +0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, +0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, +0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, +0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, +0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, +0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, +0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, +0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, +0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, +0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, +0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, +0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000

Quoted 3 lines
Quoted 1 line

Just nitpick: better to align with lower hex letters (a-f).

Sorry, I don't really understand what you meant here. Could you elaborate?

I meant to write like 0x0123abcd instead of 0x0123ABCD.

thanks,

Takashi