Skip to contentSkip to conversation

hda_intel:azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

DISCUSSION Sirus Jolt 4 participants 6 messages Feb 16, 2012

lore
Share & tools
lore

Sirus Jolt

author
#0 lore raw

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

thanks

#1 lore raw

Dear Sirus,

Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:

Quoted 8 lines

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

your message misses a lot of useful information which would help developers (not me) to help you.

Also do you notice any problems? That means, does audio work for you?

Thanks,

Paul

[1] http://alsa-project.org/main/index.php/Help_To_Debug
(Please attach that file to your next answer *and* upload it.)

#2 lore raw

I had similar issue from dmesg once.
The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.

Quoted 31 lines · Paul Menzel

Dear Sirus,

Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:

Quoted 8 lines

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

your message misses a lot of useful information which would help developers (not me) to help you.

Also do you notice any problems? That means, does audio work for you?

Thanks,

Paul

[1] http://alsa-project.org/main/index.php/Help_To_Debug
(Please attach that file to your next answer *and* upload it.)

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw

At Thu, 16 Feb 2012 17:21:20 +0800,

Quoted 4 lines · joey.jiaojg

I had similar issue from dmesg once.
The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.

No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.

Takashi

Quoted 39 lines · Paul Menzel
Quoted 23 lines

Dear Sirus,

Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:

Quoted 8 lines

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

your message misses a lot of useful information which would help developers (not me) to help you.

Also do you notice any problems? That means, does audio work for you?

Thanks,

Paul

Quoted 8 lines

[1] http://alsa-project.org/main/index.php/Help_To_Debug
(Please attach that file to your next answer *and* upload it.)

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw

Ooops, but I haven't faced this problem now (I happen once when I debug yesterday I think). So forget about it for the relation to another post (HP B1900).

Quoted 5 lines · Takashi Iwai

At Thu, 16 Feb 2012 17:21:20 +0800,

Quoted 3 lines · joey.jiaojg

I had similar issue from dmesg once.
The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.

Quoted 45 lines

No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.

Takashi

Quoted 37 lines · Paul Menzel
Quoted 23 lines

Dear Sirus,

Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:

Quoted 8 lines

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

your message misses a lot of useful information which would help developers (not me) to help you.

Also do you notice any problems? That means, does audio work for you?

Thanks,

Paul

Quoted 8 lines

[1] http://alsa-project.org/main/index.php/Help_To_Debug
(Please attach that file to your next answer *and* upload it.)

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw

At Thu, 16 Feb 2012 17:34:08 +0800,

Quoted 4 lines · joey.jiaojg

Ooops, but I haven't faced this problem now (I happen once when I debug yesterday I think). So forget about it for the relation to another post (HP B1900).

OK. The fallback to the single_cmd happens usually when invalid access to the codec chip occurs. In most cases, the verbs sent by the static model don't match with the actual hardware. Or, the verbs are sent in the bad power-state (e.g. during PM). Or whatever strange reason.

In this particular case, the verb 0x0070503 is really wrong (i.e. NID=0).

Takashi

Quoted 46 lines · Takashi Iwai
Quoted 45 lines

At Thu, 16 Feb 2012 17:21:20 +0800,

Quoted 3 lines · joey.jiaojg

I had similar issue from dmesg once.
The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.

No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.

Takashi

Quoted 32 lines · Paul Menzel
Quoted 31 lines

Dear Sirus,

Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:

Quoted 8 lines

Hi, I've got some problems to start session, because i've got the message like subject:

hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503

I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.

your message misses a lot of useful information which would help developers (not me) to help you.

Also do you notice any problems? That means, does audio work for you?

Thanks,

Paul

[1] http://alsa-project.org/main/index.php/Help_To_Debug
(Please attach that file to your next answer *and* upload it.)

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel