Skip to contentSkip to conversation

alsa: lx6464es - configure ethersound io channels

PATCH In review Tim Blechmann 2 participants 2 messages Jun 24, 2009 – Jun 25, 2009 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 alsa: lx6464es - configure ethersound io channels

as long as the io channel number is not set by the driver, the card is not visible from the ethersound network

---
 sound/pci/lx6464es/lx6464es.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)
sound/pci/lx6464es/lx6464es.c +3 -4
index ccf1b38..c92fba5 100644
@@ -654,13 +654,12 @@ static int __devinit lx_init_ethersound_config(struct lx6464es *chip)
 	int i;
 	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
 
-	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+	/* configure 64 io channels */
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) |
 		(64 << IOCR_INPUTS_OFFSET) |
+		(64 << IOCR_OUTPUTS_OFFSET) |
 		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
 
-	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
-		| (default_conf_es & CONFES_WRITE_PART_MASK);
-
 	snd_printdd("->lx_init_ethersound\n");
 
 	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
Signature · 1 line
1.6.2.1

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#1 lore raw

At Wed, 24 Jun 2009 15:27:30 +0200,

Quoted 5 lines · Tim Blechmann

as long as the io channel number is not set by the driver, the card is not visible from the ethersound network

Applied now. Thanks.

(BTW, it'd be helpful if you give a patch by git-format-patch command
so that it can be applied via git-am directly at the next time...)

Takashi