Skip to contentSkip to conversation

Oops on resume, X crashes

DISCUSSION Gou Zhuang 2 participants 8 messages Oct 20, 2003 – Oct 27, 2003 1 message not in the archive

lore
Share & tools
lore

Gou Zhuang

author
#0 lore raw

I'm running kernel 2.4.22 and alsa-0.9.7c on a Dell laptop. I have problem on suspend/resume when alsa modules loaded. I have done a few testings, below is my findings:

If the snd-pcm-oss module is in use(by arts sound server) at the time of suspend, kernel oops upon resuming and X server crashes. It has no problem when snd-pcm-oss is not in use( released by arts). 0.9.6 has the same behavior. My sound card is on-board intel8x0.

I searched the mail archive and didn't find any similar cases. Could anybody look into this problem?

Below is the decoded oops(on kernel 2.4.22 with alsa-0.9.7c loaded):
--------------------------------------------------------------
ksymoops 2.4.9 on i686 2.4.22. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.22/ (default)
-m /boot/System.map-2.4.22 (specified)

Unable to handle kernel paging request at virtual address fffffffc
c0116d70
*pde = 00001063
Oops: 0000
CPU:    0
EIP:    0010:[<c0116d70>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010007
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: d7ec2fb0 edi: 00000003 ebp: d5307ee4 esp: d5307ec8
ds: 0018 es: 0018 ss: 0018
Process X (pid: 851, stackpage=d5307000)

Stack: 00000000 00000000 00000001 00000282 d7fc7808 d7fc9eb4 d7fc9ea0 00000000
       d8bee512 d754a000 c021dc06 d7fc7800 c021dd3b d7fc7800 d7fc9ea0 00000003
       00000000 c021de83 d7fc9ea0 c142d2a0 c021dee5 c142d420 c0127e52 c142d2a0
Call Trace:    [<d8bee512>] [<c021dc06>] [<c021dd3b>] [<c021de83>] [<c021dee5>]
  [<c0127e52>] [<c0127f54>] [<c0113a43>] [<c011415c>] [<c0149b39>] [<c010740f>]
Code: 8b 4b fc 8b 01 85 c7 75 19 8b 02 89 d3 89 c2 0f 18 00 39 f3
Quoted 5 lines
Quoted 5 lines

EIP; c0116d70 <__wake_up+30/80> <=====

esi; d7ec2fb0 <_end+17b53f8c/1880603c>
ebp; d5307ee4 <_end+14f98ec0/1880603c>
esp; d5307ec8 <_end+14f98ea4/1880603c>

Trace; d8bee512 <[snd-intel8x0]snd_intel8x0_resume+12/20> Trace; c021dc06 <pci_pm_resume_device+26/30> Trace; c021dd3b <pci_pm_resume_bus+2b/70>
Trace; c021de83 <pci_pm_resume+33/50>
Trace; c021dee5 <pci_pm_callback+45/50>
Trace; c0127e52 <pm_send+72/a0>
Trace; c0127f54 <pm_send_all+74/b0>
Trace; c0113a43 <suspend+e3/120>
Trace; c011415c <do_ioctl+10c/180>
Trace; c0149b39 <sys_ioctl+c9/250>
Trace; c010740f <system_call+33/38>

Code; c0116d70 <__wake_up+30/80>
00000000 <_EIP>:
Code; c0116d70 <__wake_up+30/80> <=====
0: 8b 4b fc mov 0xfffffffc(%ebx),%ecx <=====
Code; c0116d73 <__wake_up+33/80>
3: 8b 01 mov (%ecx),%eax
Code; c0116d75 <__wake_up+35/80>
5: 85 c7 test %eax,%edi
Code; c0116d77 <__wake_up+37/80>
7: 75 19 jne 22 <_EIP+0x22>
Code; c0116d79 <__wake_up+39/80>
9: 8b 02 mov (%edx),%eax
Code; c0116d7b <__wake_up+3b/80>
b: 89 d3 mov %edx,%ebx
Code; c0116d7d <__wake_up+3d/80>
d: 89 c2 mov %eax,%edx
Code; c0116d7f <__wake_up+3f/80>
f: 0f 18 00 prefetchnta (%eax)
Code; c0116d82 <__wake_up+42/80>
12: 39 f3 cmp %esi,%ebx

--------------------------------------------------------------

This is the list of modules:
Module Size Used by Not tainted

snd-pcm-oss            39364   1
snd-mixer-oss          13720   1 [snd-pcm-oss]
keybdev                 2112   0 (unused)
mousedev                4404   1
hid                    15624   0 (unused)
input                   3328   0 [keybdev mousedev hid]
uhci                   25968   0 (unused)
usbcore                62624   1 [hid uhci]
snd-intel8x0           19460   2
snd-pcm                61536   0 [snd-pcm-oss snd-intel8x0]
snd-timer              14628   0 [snd-pcm]
snd-ac97-codec         42456   0 [snd-intel8x0]
snd-page-alloc          6484   0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3456   0 [snd-intel8x0]
snd-rawmidi            13536   0 [snd-mpu401-uart]
snd-seq-device          4288   0 [snd-rawmidi]
snd                    29956   0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer
snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3588   4 [snd]
3c59x                  27984   1
yenta_socket           10816   0
pcmcia_core            43104   0 [yenta_socket]
nls_cp936             119964   1 (autoclean)
nls_gb2312               448   1 (autoclean)

-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com

#1 lore raw

At Mon, 20 Oct 2003 15:48:55 +0800,

Quoted 10 lines · Gou Zhuang

I'm running kernel 2.4.22 and alsa-0.9.7c on a Dell laptop. I have problem on suspend/resume when alsa modules loaded. I have done a few testings, below is my findings:

If the snd-pcm-oss module is in use(by arts sound server) at the time of suspend, kernel oops upon resuming and X server crashes. It has no problem when snd-pcm-oss is not in use( released by arts). 0.9.6 has the same behavior. My sound card is on-board intel8x0.

I searched the mail archive and didn't find any similar cases. Could anybody look into this problem?

i don't see any obvious bugs in the resume code, and i thought it worked fine once on my test machine.
could you check at which funciton the oops occurs, e.g. simply by puttig debug printk at each entry point? according to ksymoops, it's in snd_intel8x0_resume() (i.e. intel8x0_resume()). this could be either in snd_intel8x0_chip_init() or snd_ac97_resume().
in the latter function, there is no sleep or no wakeup, so it's likely in the former one.

Takashi

Quoted 100 lines

Below is the decoded oops(on kernel 2.4.22 with alsa-0.9.7c loaded):
--------------------------------------------------------------
ksymoops 2.4.9 on i686 2.4.22. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.22/ (default)
-m /boot/System.map-2.4.22 (specified)

Unable to handle kernel paging request at virtual address fffffffc
c0116d70
*pde = 00001063
Oops: 0000
CPU:    0
EIP:    0010:[<c0116d70>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010007
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: d7ec2fb0 edi: 00000003 ebp: d5307ee4 esp: d5307ec8
ds: 0018 es: 0018 ss: 0018
Process X (pid: 851, stackpage=d5307000)

Stack: 00000000 00000000 00000001 00000282 d7fc7808 d7fc9eb4 d7fc9ea0 00000000
       d8bee512 d754a000 c021dc06 d7fc7800 c021dd3b d7fc7800 d7fc9ea0 00000003
       00000000 c021de83 d7fc9ea0 c142d2a0 c021dee5 c142d420 c0127e52 c142d2a0
Call Trace:    [<d8bee512>] [<c021dc06>] [<c021dd3b>] [<c021de83>] [<c021dee5>]
  [<c0127e52>] [<c0127f54>] [<c0113a43>] [<c011415c>] [<c0149b39>] [<c010740f>]
Code: 8b 4b fc 8b 01 85 c7 75 19 8b 02 89 d3 89 c2 0f 18 00 39 f3
Quoted 5 lines
Quoted 5 lines

EIP; c0116d70 <__wake_up+30/80> <=====

esi; d7ec2fb0 <_end+17b53f8c/1880603c>
ebp; d5307ee4 <_end+14f98ec0/1880603c>
esp; d5307ec8 <_end+14f98ea4/1880603c>

Trace; d8bee512 <[snd-intel8x0]snd_intel8x0_resume+12/20> Trace; c021dc06 <pci_pm_resume_device+26/30> Trace; c021dd3b <pci_pm_resume_bus+2b/70>
Trace; c021de83 <pci_pm_resume+33/50>
Trace; c021dee5 <pci_pm_callback+45/50>
Trace; c0127e52 <pm_send+72/a0>
Trace; c0127f54 <pm_send_all+74/b0>
Trace; c0113a43 <suspend+e3/120>
Trace; c011415c <do_ioctl+10c/180>
Trace; c0149b39 <sys_ioctl+c9/250>
Trace; c010740f <system_call+33/38>

Code; c0116d70 <__wake_up+30/80>
00000000 <_EIP>:
Code; c0116d70 <__wake_up+30/80> <=====
0: 8b 4b fc mov 0xfffffffc(%ebx),%ecx <=====
Code; c0116d73 <__wake_up+33/80>
3: 8b 01 mov (%ecx),%eax
Code; c0116d75 <__wake_up+35/80>
5: 85 c7 test %eax,%edi
Code; c0116d77 <__wake_up+37/80>
7: 75 19 jne 22 <_EIP+0x22>
Code; c0116d79 <__wake_up+39/80>
9: 8b 02 mov (%edx),%eax
Code; c0116d7b <__wake_up+3b/80>
b: 89 d3 mov %edx,%ebx
Code; c0116d7d <__wake_up+3d/80>
d: 89 c2 mov %eax,%edx
Code; c0116d7f <__wake_up+3f/80>
f: 0f 18 00 prefetchnta (%eax)
Code; c0116d82 <__wake_up+42/80>
12: 39 f3 cmp %esi,%ebx

--------------------------------------------------------------

This is the list of modules:
Module Size Used by Not tainted

snd-pcm-oss            39364   1
snd-mixer-oss          13720   1 [snd-pcm-oss]
keybdev                 2112   0 (unused)
mousedev                4404   1
hid                    15624   0 (unused)
input                   3328   0 [keybdev mousedev hid]
uhci                   25968   0 (unused)
usbcore                62624   1 [hid uhci]
snd-intel8x0           19460   2
snd-pcm                61536   0 [snd-pcm-oss snd-intel8x0]
snd-timer              14628   0 [snd-pcm]
snd-ac97-codec         42456   0 [snd-intel8x0]
snd-page-alloc          6484   0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3456   0 [snd-intel8x0]
snd-rawmidi            13536   0 [snd-mpu401-uart]
snd-seq-device          4288   0 [snd-rawmidi]
snd                    29956   0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer
snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3588   4 [snd]
3c59x                  27984   1
yenta_socket           10816   0
pcmcia_core            43104   0 [yenta_socket]
nls_cp936             119964   1 (autoclean)
nls_gb2312               448   1 (autoclean)
Quoted 10 lines

-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

At Tue, 21 Oct 2003 16:38:44 +0800,

Quoted 27 lines · Bill Gou

[1 <text/plain; us-ascii (7bit)>]

Quoted 24 lines · Takashi Iwai

At Mon, 20 Oct 2003 15:48:55 +0800,

Quoted 9 lines · Gou Zhuang

I'm running kernel 2.4.22 and alsa-0.9.7c on a Dell laptop. I have problem on suspend/resume when alsa modules loaded. I have done a few testings, below is my findings:

If the snd-pcm-oss module is in use(by arts sound server) at the time of suspend, kernel oops upon resuming and X server crashes. It has no problem when snd-pcm-oss is not in use( released by arts). 0.9.6 has the same behavior. My sound card is on-board intel8x0.

I searched the mail archive and didn't find any similar cases. Could anybody look into this problem?

i don't see any obvious bugs in the resume code, and i thought it worked fine once on my test machine.
could you check at which funciton the oops occurs, e.g. simply by puttig debug printk at each entry point? according to ksymoops, it's in snd_intel8x0_resume() (i.e. intel8x0_resume()). this could be either in snd_intel8x0_chip_init() or snd_ac97_resume().
in the latter function, there is no sleep or no wakeup, so it's likely in the former one.

Quoted 7 lines
Quoted 2 lines

Takashi

I added some printks in intel8x0.c and ac97_codec.c, all printk outputs are labeled 'MYDEBUG'. I also enabled debug when compiling. This time I noticed the below debug message after resuming, it repeated for 170 times:

ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed

that's strange if this message appears before snd_intel8x0_resume() is called. if it's after the resume() call, it's ok.

Quoted 1 line

The last function called before kernel oops is snd_power_change_state().

yes, it looks like the wake_up() in that function. but it should be ok. perhaps memory corruption already occured somewhere. anyway, try to comment out the wake_up() there.

also, please try to do suspend with the minimum setting - i.e. no applications running but just only the drivers.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54

author
#4 lore raw
Quoted 38 lines · Takashi Iwai

At Tue, 21 Oct 2003 16:38:44 +0800,

Quoted 35 lines · Bill Gou

[1 <text/plain; us-ascii (7bit)>]

Quoted 25 lines · Takashi Iwai

At Mon, 20 Oct 2003 15:48:55 +0800,

Quoted 9 lines · Gou Zhuang

I'm running kernel 2.4.22 and alsa-0.9.7c on a Dell laptop. I have problem on suspend/resume when alsa modules loaded. I have done a few testings, below is my findings:

If the snd-pcm-oss module is in use(by arts sound server) at the time of suspend, kernel oops upon resuming and X server crashes. It has no problem when snd-pcm-oss is not in use( released by arts). 0.9.6 has the same behavior. My sound card is on-board intel8x0.

I searched the mail archive and didn't find any similar cases. Could anybody look into this problem?

i don't see any obvious bugs in the resume code, and i thought it worked fine once on my test machine.
could you check at which funciton the oops occurs, e.g. simply by puttig debug printk at each entry point? according to ksymoops, it's in snd_intel8x0_resume() (i.e. intel8x0_resume()). this could be either in snd_intel8x0_chip_init() or snd_ac97_resume().
in the latter function, there is no sleep or no wakeup, so it's likely in the former one.

Quoted 2 lines

Takashi

I added some printks in intel8x0.c and ac97_codec.c, all printk outputs are labeled 'MYDEBUG'. I also enabled debug when compiling. This time I noticed the below debug message after resuming, it repeated for 170 times:

Quoted 6 lines
Quoted 1 line

ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed

that's strange if this message appears before snd_intel8x0_resume() is called. if it's after the resume() call, it's ok.

I turned on OSS_DEBUG in pcm_oss.c. I did not start X this time, I only started artsd from console to reproduce the oops. Below is the messages after resume, my comments are marked with <<<---------

-------------------------
MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend()
MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot) MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
pcm_oss: ioctl = 0x8010500c
pcm_oss: space: bytes = 7168, fragments = 7, fragstotal = 7, fragsize = 1024
pcm_oss: write: recovering from SUSPEND
ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed
pcm_oss: write 1024 bytes (wrote -11 bytes) <<<----------- IT SEEMS THE WRITE FAILED! MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
PCI: Setting latency timer of device 00:1f.5 to 64
MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0)

Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c0115f09
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c0115f09>]    Not tainted
EFLAGS: 00010046
eax: d7ed2e0c   ebx: d7ed2e14   ecx: d7783b2c   edx: 00000000
esi: d7ed2fc4   edi: 00000003   ebp: d567debc   esp: d567dea0
ds: 0018   es: 0018   ss: 0018
Process apmd (pid: 804, stackpage=d567d000)
Stack: d8be418f 00000000 00000001 00000282 00000003 d75f5418 d7ed2e14 00000000
       d8bf5cd8 d8bf7840 d8bf70aa 00000881 c1437808 c1439eb4 c1439ea0 d8bf5dbf
       d75f5418 d8c0fe91 d73cfcc0 c1438808 c021cd96 c1437800 c021cecb c1437800
Call Trace:    [<d8be418f>] [<d8bf5cd8>] [<d8bf7840>] [<d8bf70aa>] [<d8bf5dbf>]
  [<d8c0fe91>] [<c021cd96>] [<c021cecb>] [<c021d013>] [<c021d075>] [<c0126fe2>]
  [<c01270e4>] [<c0113973>] [<c011408c>] [<c0148cc9>] [<c013b504>] [<c010740f>]

Code: 8b 02 89 d3 89 c2 0f 18 00 39 f3 75 ea ff 75 f0 9d 83 c4 10
 <6>usb.c: USB disconnect on device 00:1d.0-1 address 4

hub.c: new USB device 00:1d.0-1, assigned address 5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:5.0
-----------------------------

It looks like the error message was emitted from snd_pcm_oss_write3() in pcm_oss.c. There must be a process(artsd?) trying to write to oss device before intel8x0_resume() is called. Can we block those writes until intel8x0_resume() returns?

ksymoops output:
------------------------------
ksymoops 2.4.9 on i686 2.4.22. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.22/ (default)
-m /boot/System.map-2.4.22 (specified)

MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend()
MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot) MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0)

Unable to handle kernel NULL pointer dereference at virtual address 00000000
c0115f09
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c0115f09>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010046
eax: d7ed2e0c ebx: d7ed2e14 ecx: d7783b2c edx: 00000000
esi: d7ed2fc4 edi: 00000003 ebp: d567debc esp: d567dea0
ds: 0018 es: 0018 ss: 0018
Process apmd (pid: 804, stackpage=d567d000)

Stack: d8be418f 00000000 00000001 00000282 00000003 d75f5418 d7ed2e14 00000000
       d8bf5cd8 d8bf7840 d8bf70aa 00000881 c1437808 c1439eb4 c1439ea0 d8bf5dbf
       d75f5418 d8c0fe91 d73cfcc0 c1438808 c021cd96 c1437800 c021cecb c1437800
Call Trace:    [<d8be418f>] [<d8bf5cd8>] [<d8bf7840>] [<d8bf70aa>] [<d8bf5dbf>]
  [<d8c0fe91>] [<c021cd96>] [<c021cecb>] [<c021d013>] [<c021d075>] [<c0126fe2>]
  [<c01270e4>] [<c0113973>] [<c011408c>] [<c0148cc9>] [<c013b504>] [<c010740f>]
Code: 8b 02 89 d3 89 c2 0f 18 00 39 f3 75 ea ff 75 f0 9d 83 c4 10
Quoted 8 lines
Quoted 8 lines

EIP; c0115f09 <__wake_up+39/80> <=====

eax; d7ed2e0c <_end+17b68f88/1880b1dc>
ebx; d7ed2e14 <_end+17b68f90/1880b1dc>
ecx; d7783b2c <_end+17419ca8/1880b1dc>
esi; d7ed2fc4 <_end+17b69140/1880b1dc>
ebp; d567debc <_end+15314038/1880b1dc>
esp; d567dea0 <_end+1531401c/1880b1dc>

Trace; d8be418f <[snd-pcm]snd_pcm_playback_drain+25f/2e0> Trace; d8bf5cd8 <[snd-intel8x0]intel8x0_resume+108/140> Trace; d8bf7840 <[snd-intel8x0]__module_parm_desc_mpu_port+52c/9ac> Trace; d8bf70aa <[snd-intel8x0]__module_description+16/55> Trace; d8bf5dbf <[snd-intel8x0]snd_intel8x0_resume+4f/60> Trace; d8c0fe91 <[uhci]uhci_pci_resume+21/30>
Trace; c021cd96 <pci_pm_resume_device+26/30>
Trace; c021cecb <pci_pm_resume_bus+2b/70>
Trace; c021d013 <pci_pm_resume+33/50>
Trace; c021d075 <pci_pm_callback+45/50>
Trace; c0126fe2 <pm_send+72/a0>
Trace; c01270e4 <pm_send_all+74/b0>
Trace; c0113973 <suspend+e3/120>
Trace; c011408c <do_ioctl+10c/180>
Trace; c0148cc9 <sys_ioctl+c9/250>
Trace; c013b504 <fsync_dev+54/60>
Trace; c010740f <system_call+33/38>

Code; c0115f09 <__wake_up+39/80>
00000000 <_EIP>:
Code; c0115f09 <__wake_up+39/80> <=====
0: 8b 02 mov (%edx),%eax <=====
Code; c0115f0b <__wake_up+3b/80>
2: 89 d3 mov %edx,%ebx
Code; c0115f0d <__wake_up+3d/80>
4: 89 c2 mov %eax,%edx
Code; c0115f0f <__wake_up+3f/80>
6: 0f 18 00 prefetchnta (%eax)
Code; c0115f12 <__wake_up+42/80>
9: 39 f3 cmp %esi,%ebx
Code; c0115f14 <__wake_up+44/80>
b: 75 ea jne fffffff7 <_EIP+0xfffffff7>
Code; c0115f16 <__wake_up+46/80>
d: ff 75 f0 pushl 0xfffffff0(%ebp)
Code; c0115f19 <__wake_up+49/80>
10: 9d popf
Code; c0115f1a <__wake_up+4a/80>
11: 83 c4 10 add $0x10,%esp
---------------------------------

It's a bit different than previous ones, possibly because there's no X started.

Quoted 5 lines
Quoted 3 lines

The last function called before kernel oops is snd_power_change_state().

Quoted 8 lines

yes, it looks like the wake_up() in that function. but it should be ok. perhaps memory corruption already occured somewhere. anyway, try to comment out the wake_up() there.

also, please try to do suspend with the minimum setting - i.e. no applications running but just only the drivers.

I tried suspend with minimum setting(fresh reboot and no X window), no trouble found. I also tried to suspend while playing mp3 with amp at console, it seems ok too, except 1 "Unexpected hw_pointer value" message before entering intel8x0_suspend():

-------------------------
....
pcm_oss: write 4096 bytes (wrote 4096 bytes) <<<---- PLAYING MP3
pcm_oss: write 4096 bytes (wrote 4096 bytes)
ALSA ../alsa-kernel/core/pcm_lib.c:182: Unexpected hw_pointer value (stream = 0, delta:
-7432, max jitter = 8192): wrong interrupt acknowledge?
MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend() <<<----- GOING TO SUSPEND
MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot) MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
pcm_oss: write: recovering from SUSPEND
MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
PCI: Setting latency timer of device 00:1f.5 to 64
MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0) MYDEBUG intel8x0.c:2179: Return from snd_power_change_state()
usb.c: USB disconnect on device 00:1d.0-1 address 3
pcm_oss: write 4096 bytes (wrote 4096 bytes) <<<---- CONTINUE PLAYING MP3 AFTER RESUMING
pcm_oss: write 4096 bytes (wrote 4096 bytes)
....

-------------------------

It's strange that suspend in the course of playing mp3 can survive the resume, while suspend with artsd running causes kernel oops on rusume. What is artsd doing?

-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54

#5 lore raw

At Thu, 23 Oct 2003 17:12:08 +0800,

Quoted 4 lines · Gou Zhuang

I turned on OSS_DEBUG in pcm_oss.c. I did not start X this time, I only started artsd from console to reproduce the oops. Below is the messages after resume, my comments are marked with <<<---------

Quoted 11 lines

-------------------------
MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend()
MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot) MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
pcm_oss: ioctl = 0x8010500c
pcm_oss: space: bytes = 7168, fragments = 7, fragstotal = 7, fragsize = 1024
pcm_oss: write: recovering from SUSPEND
ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed
pcm_oss: write 1024 bytes (wrote -11 bytes) <<<----------- IT SEEMS THE WRITE FAILED!

that's ok, because it's opened with non-block mode.

Quoted 10 lines

MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
PCI: Setting latency timer of device 00:1f.5 to 64
MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0)

ok, i think i found a bug.
please try the attached patch.

Takashi

author
#6 lore raw
Quoted 35 lines · Takashi Iwai

At Thu, 23 Oct 2003 17:12:08 +0800,

Quoted 4 lines · Gou Zhuang

I turned on OSS_DEBUG in pcm_oss.c. I did not start X this time, I only started artsd from console to reproduce the oops. Below is the messages after resume, my comments are marked with <<<---------

Quoted 11 lines

-------------------------
MYDEBUG intel8x0.c:2141: Entering intel8x0_suspend()
MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 MYDEBUG intel8x0.c:2149: Call snd_pcm_suspend_all() on Intel 82801CA-ICH3 - MIC ADC MYDEBUG intel8x0.c:2152: Call snd_power_change_state(card, SNDRV_CTL_POWER_D3hot) MYDEBUG intel8x0.c:2154: Return from snd_power_change_state()
pcm_oss: ioctl = 0x8010500c
pcm_oss: space: bytes = 7168, fragments = 7, fragstotal = 7, fragsize = 1024
pcm_oss: write: recovering from SUSPEND
ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed
pcm_oss: write 1024 bytes (wrote -11 bytes) <<<----------- IT SEEMS THE WRITE FAILED!

that's ok, because it's opened with non-block mode.

Quoted 10 lines

MYDEBUG intel8x0.c:2162: Entering intel8x0_resume()
MYDEBUG intel8x0.c:2167: Call pci_enable_device(chip->pci)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
MYDEBUG intel8x0.c:2169: Call pci_set_master(chip->pci)
PCI: Setting latency timer of device 00:1f.5 to 64
MYDEBUG intel8x0.c:2067: Entering snd_intel8x0_chip_init()
MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG ../../alsa-kernel/pci/ac97/ac97_codec.c:2148: Entering snd_ac97_resume() MYDEBUG intel8x0.c:2177: Call snd_power_change_state(card, SNDRV_CTL_POWER_D0)

Quoted 5 lines

ok, i think i found a bug.
please try the attached patch.

Takashi

I applied the patch, the oops went away :) But I still get a lot of "ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed".

And the artsd crashed after resume with the following errmsg:

Sound Server fatal error:
AudioSubSystem::handleIO: write failed
len = 16, can_write = 24, errno = 4 (interrupted system call)

Do you have any clue on this?

gouzhuang

-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/

#7 lore raw

At Fri, 24 Oct 2003 13:45:53 +0800,

Quoted 11 lines · Gou Zhuang

I applied the patch, the oops went away :) But I still get a lot of "ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed".

And the artsd crashed after resume with the following errmsg:

Sound Server fatal error:
AudioSubSystem::handleIO: write failed
len = 16, can_write = 24, errno = 4 (interrupted system call)

Do you have any clue on this?

how about the attached patch? (in replacement with the previous one.)

Takashi

author
#8 lore raw
Quoted 12 lines · Takashi Iwai

At Fri, 24 Oct 2003 13:45:53 +0800,

Quoted 9 lines · Gou Zhuang

I applied the patch, the oops went away :) But I still get a lot of "ALSA pcm_oss.c:552: snd_pcm_oss_prepare: SNDRV_PCM_IOCTL_PREPARE failed".

And the artsd crashed after resume with the following errmsg:

Sound Server fatal error:
AudioSubSystem::handleIO: write failed
len = 16, can_write = 24, errno = 4 (interrupted system call)

Quoted 7 lines
Quoted 1 line

Do you have any clue on this?

how about the attached patch? (in replacement with the previous one.)

Takashi

Yes, this patch fixed it.

Thanks,
Gouzhuang

-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/