Skip to contentSkip to conversation

ice1712: Use bitrev8

PATCH In review Akinobu Mita 2 participants 2 messages Nov 13, 2009 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ice1712: Use bitrev8

---
 sound/i2c/cs8427.c |   15 ++-------------
 sound/pci/Kconfig  |    1 +
 2 files changed, 3 insertions(+), 13 deletions(-)
sound/i2c/cs8427.c +2 -13
index 020a5d5..04ae870 100644
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/bitrev.h>
 #include <asm/unaligned.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -55,18 +56,6 @@ struct cs8427 {
 	struct cs8427_stream capture;
 };
 
-static unsigned char swapbits(unsigned char val)
-{
-	int bit;
-	unsigned char res = 0;
-	for (bit = 0; bit < 8; bit++) {
-		res <<= 1;
-		res |= val & 1;
-		val >>= 1;
-	}
-	return res;
-}
-
 int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
 			 unsigned char val)
 {
@@ -149,7 +138,7 @@ static int snd_cs8427_send_corudata(struct snd_i2c_device *device,
 	}
 	data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
 	for (idx = 0; idx < count; idx++)
-		data[idx + 1] = swapbits(ndata[idx]);
+		data[idx + 1] = bitrev8(ndata[idx]);
 	if (snd_i2c_sendbytes(device, data, count + 1) != count + 1)
 		return -EIO;
 	return 1;
sound/pci/Kconfig +1 -0
index 75c602b..351654c 100644
@@ -570,6 +570,7 @@ config SND_ICE1712
 	tristate "ICEnsemble ICE1712 (Envy24)"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select BITREVERSE
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
Signature · 1 line
1.6.5.1
#1 lore raw

At Fri, 13 Nov 2009 16:02:56 +0900,

Quoted 5 lines · Akinobu Mita

Applied now. Thanks!

Takashi

Quoted 60 lines
---
 sound/i2c/cs8427.c |   15 ++-------------
 sound/pci/Kconfig  |    1 +
 2 files changed, 3 insertions(+), 13 deletions(-)
sound/i2c/cs8427.c +2 -13
index 020a5d5..04ae870 100644
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/bitrev.h>
 #include <asm/unaligned.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -55,18 +56,6 @@ struct cs8427 {
 	struct cs8427_stream capture;
 };
 
-static unsigned char swapbits(unsigned char val)
-{
-	int bit;
-	unsigned char res = 0;
-	for (bit = 0; bit < 8; bit++) {
-		res <<= 1;
-		res |= val & 1;
-		val >>= 1;
-	}
-	return res;
-}
-
 int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
 			 unsigned char val)
 {
@@ -149,7 +138,7 @@ static int snd_cs8427_send_corudata(struct snd_i2c_device *device,
 	}
 	data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
 	for (idx = 0; idx < count; idx++)
-		data[idx + 1] = swapbits(ndata[idx]);
+		data[idx + 1] = bitrev8(ndata[idx]);
 	if (snd_i2c_sendbytes(device, data, count + 1) != count + 1)
 		return -EIO;
 	return 1;
sound/pci/Kconfig +1 -0
index 75c602b..351654c 100644
@@ -570,6 +570,7 @@ config SND_ICE1712
 	tristate "ICEnsemble ICE1712 (Envy24)"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select BITREVERSE
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
Signature · 1 line
1.6.5.1