Skip to contentSkip to conversation

GPF in snd_hda_intel

BUG Luca Tettamanti 2 participants 5 messages Oct 10, 2009 – Oct 13, 2009 Sound

lore
Share & tools
lore
#0 lore raw

Hello,
with current git kernel (bd381934) I see a GPF when the snd_hda_intel driver is loaded; the regression is recent, 0eca52a works fine.
The machine is an ASUS laptop (F3Sa), this is the sound card:

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

The codec is ALC660-VD (snd_hda_codec_realtek). The is the GFP message:

general protection fault: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlan0/
CPU 0
Modules linked in: arc4 snd_hda_codec_realtek ecb iwlagn snd_hda_intel(+) usbhid hid btusb snd_hda_codec iwlcore snd_hwdep bluetooth snd_pcm rtc_cmos rtc_core asus_laptop snd_seq snd_timer snd_seq_device snd psmouse mac80211 rtc_lib video soundcore cfg80211 evdev output snd_page_alloc rfkill battery button pcspkr ac processor ext4 mbcache jbd2 crc16 dm_mod sg sr_mod cdrom sd_mod ahci uhci_hcd ata_piix ohci1394 sdhci_pci sdhci mmc_core led_class ieee1394 libata ehci_hcd scsi_mod usbcore intel_agp thermal fan unix [last unloaded: scsi_wait_scan]
Pid: 1027, comm: modprobe Not tainted 2.6.32-rc3-00337-gbd38193 #160 F3Sa    
RIP: 0010:[<ffffffffa033aebd>]  [<ffffffffa033aebd>] snd_hda_sequence_write+0x27/0x34 [snd_hda_codec]
RSP: 0018:ffff88013e0afbe8  EFLAGS: 00010207
RAX: 0000000000000000 RBX: 36434c4100000006 RCX: 000000000000009a
RDX: ffff88013e0afb28 RSI: 36434c4100000006 RDI: ffff88013e259000
RBP: ffff88013e0afbf8 R08: 000000000000005e R09: ffff88013e0af9d8
R10: 0000000000000000 R11: 000000000000d2d0 R12: ffff88013e259000
R13: ffff88013e259000 R14: ffff88013d12c800 R15: ffff88013e0afd08
FS:  00007f423f9086f0(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000061d468 CR3: 000000013e568000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1027, threadinfo ffff88013e0ae000, task ffff88013ddbc290)
Stack:
 0000000000000006 ffff88013d12c830 ffff88013e0afc28 ffffffffa03bc117
<0> ffff88013e259000 0000000000000002 ffff88013dd68258 ffff88013de4f600
<0> ffff88013e0afc48 ffffffffa033aef5 ffff88013dd68258 ffff88013e259000
Call Trace:
 [<ffffffffa03bc117>] alc_init+0x2f8/0x31e [snd_hda_codec_realtek]
 [<ffffffffa033aef5>] snd_hda_codec_build_controls+0x2b/0x4c [snd_hda_codec]
 [<ffffffffa033c8ca>] snd_hda_build_controls+0x23/0x7f [snd_hda_codec]
 [<ffffffffa03899a0>] azx_probe+0x9d9/0xa97 [snd_hda_intel]
 [<ffffffffa0388e10>] ? azx_send_cmd+0x0/0x174 [snd_hda_intel]
 [<ffffffffa0388c19>] ? azx_get_response+0x0/0x1f7 [snd_hda_intel]
 [<ffffffffa0388276>] ? azx_attach_pcm_stream+0x0/0x209 [snd_hda_intel]
 [<ffffffffa0387ec4>] ? azx_bus_reset+0x0/0x79 [snd_hda_intel]
 [<ffffffffa0387d28>] ? azx_power_notify+0x0/0x5d [snd_hda_intel]
 [<ffffffff811829f3>] local_pci_probe+0x12/0x16
 [<ffffffff811836b9>] pci_device_probe+0x5f/0x89
 [<ffffffff81207f68>] ? driver_sysfs_add+0x4c/0x72
 [<ffffffff812080b4>] driver_probe_device+0xad/0x15f
 [<ffffffff812081be>] __driver_attach+0x58/0x7b
 [<ffffffff81208166>] ? __driver_attach+0x0/0x7b
 [<ffffffff81207893>] bus_for_each_dev+0x4e/0x84
 [<ffffffff81207f1a>] driver_attach+0x1c/0x1e
 [<ffffffff81207205>] bus_add_driver+0x126/0x26f
 [<ffffffff812084b2>] driver_register+0xb3/0x121
 [<ffffffffa038f000>] ? alsa_card_azx_init+0x0/0x20 [snd_hda_intel]
 [<ffffffff811838fe>] __pci_register_driver+0x51/0xbc
 [<ffffffffa038f000>] ? alsa_card_azx_init+0x0/0x20 [snd_hda_intel]
 [<ffffffffa038f01e>] alsa_card_azx_init+0x1e/0x20 [snd_hda_intel]
 [<ffffffff81009060>] do_one_initcall+0x5a/0x14a
 [<ffffffff8107270a>] sys_init_module+0xd0/0x229
 [<ffffffff8100baeb>] system_call_fastpath+0x16/0x1b
Code: 31 c0 c9 c3 55 48 89 e5 41 54 49 89 fc 53 48 89 f3 eb 18 8b 4b 04 44 8b 43 08 0f b7 f0 31 d2 4c 89 e7 48 83 c3 0c e8 ce f4 ff ff <66> 8b 03 66 85 c0 75 e0 5b 41 5c c9 c3 55 48 89 e5 53 48 89 fb
RIP  [<ffffffffa033aebd>] snd_hda_sequence_write+0x27/0x34 [snd_hda_codec]
 RSP <ffff88013e0afbe8>
---[ end trace 91ec1e9b500145fa ]---

The disassembly:

1e96:       55                      push   %rbp
1e97:       48 89 e5                mov    %rsp,%rbp
1e9a:       41 54                   push   %r12
1e9c:       49 89 fc                mov    %rdi,%r12
1e9f:       53                      push   %rbx
1ea0:       48 89 f3                mov    %rsi,%rbx
1ea3:       eb 18                   jmp    1ebd <snd_hda_sequence_write+0x27>
1ea5:       8b 4b 04                mov    0x4(%rbx),%ecx
1ea8:       44 8b 43 08             mov    0x8(%rbx),%r8d
1eac:       0f b7 f0                movzwl %ax,%esi
1eaf:       31 d2                   xor    %edx,%edx
1eb1:       4c 89 e7                mov    %r12,%rdi
1eb4:       48 83 c3 0c             add    $0xc,%rbx
1eb8:       e8 00 00 00 00          callq  1ebd <snd_hda_sequence_write+0x27>
1ebd:       66 8b 03                mov    (%rbx),%ax <-- fault here
1ec0:       66 85 c0                test   %ax,%ax
1ec3:       75 e0                   jne    1ea5 <snd_hda_sequence_write+0xf>
1ec5:       5b                      pop    %rbx
1ec6:       41 5c                   pop    %r12
1ec8:       c9                      leaveq
1ec9:       c3                      retq

Luca

#1 lore raw

At Sat, 10 Oct 2009 15:01:10 +0200,

Quoted 5 lines · Luca Tettamanti

Hello,
with current git kernel (bd381934) I see a GPF when the snd_hda_intel driver is loaded; the regression is recent, 0eca52a works fine.
The machine is an ASUS laptop (F3Sa), this is the sound card:

Could you load the snd-hda-intel module with probe_only=1 option, and give the output of "alsa-info.sh --no-upload" ?

If 0eca52a worked, there are only a few changes regarding hda-intel.

defb5ab2e0ff08ff9a942e2bb7e14c21a55ec26b
ALSA: hda - Fix yet another auto-mic bug in ALC268
01d4825df62d1d405035b90294bf38616d3f380b
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()
f8f25ba3563dab14b1c3ea4d829642b8a61ca5d7
ALSA: hda - Add a workaround for ASUS A7K
15870f05e90a365f8022da416e713be0c5024e2f
ALSA: hda - Fix invalid initializations for ALC861 auto mode

The possible culprit is the third one, f8f25ba3563dab1. Could you try to revert this commit?

thanks,

Takashi

#2 lore raw
Quoted 8 lines · Takashi Iwai

At Sat, 10 Oct 2009 15:01:10 +0200,

Quoted 5 lines · Luca Tettamanti

Hello,
with current git kernel (bd381934) I see a GPF when the snd_hda_intel driver is loaded; the regression is recent, 0eca52a works fine.
The machine is an ASUS laptop (F3Sa), this is the sound card:

Quoted 7 lines

Could you load the snd-hda-intel module with probe_only=1 option, and give the output of "alsa-info.sh --no-upload" ?

If 0eca52a worked, there are only a few changes regarding hda-intel.

f8f25ba3563dab14b1c3ea4d829642b8a61ca5d7
   ALSA: hda - Add a workaround for ASUS A7K

This is probably related; I haven't actually tested yet, but I have one more information: I had "model=lenovo" in modprobe configuration. This was necessary because otherwise the driver applied the quirk for Asus G1, resulting in no sound (see bug
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3513).
The driver works fine without "model" parameter (possibly due to the removal of the quirk entry for the the G1); I get a warning about a timeout when MSI is not enabled though:

HDA Intel 0000:00:1b.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC660-VD: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018f0900

Will do a compile test ASAP.

Luca

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.58
!!################################

!!Script ran on: Mon Oct 12 13:23:26 UTC 2009

!!Linux Distribution
!!------------------

Debian GNU/Linux squeeze/sid \n \l

!!DMI Information
!!---------------

Manufacturer:      ASUSTeK Computer Inc.        
Product Name:      F3Sa                

!!Kernel Information
!!------------------

Kernel release:    2.6.32-rc3-00337-gbd38193
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         unknown
SMP Enabled:       Yes

!!ALSA Version
!!------------

Driver version:     1.0.21
Library version:    1.0.21a
Utilities version:  1.0.21

!!Loaded ALSA modules
!!-------------------

snd_hda_intel

!!Sound Servers on this system
!!----------------------------

No sound servers found.

!!Soundcards recognised by ALSA
!!-----------------------------

0 [Intel ]: HDA-Intel - HDA Intel

                      HDA Intel at 0xfebf8000 irq 22

!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------

00:1b.0 0403: 8086:284b (rev 03)

	Subsystem: 1043:1339

!!Modprobe options (Sound related)
!!--------------------------------

snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-hda-intel: enable_msi=1 model=lenovo

!!Loaded sound module options
!!--------------------------

!!Module: snd_hda_intel

	bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1
	enable : Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : 0
	id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
	index : -1,-1,-1,-1,-1,-1,-1,-1
	model : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
	position_fix : 0,0,0,0,0,0,0,0
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1
	probe_only : Y,N,N,N,N,N,N,N
	single_cmd : N

!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Not Set
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0660
Subsystem Id: 0x10431339
Revision Id: 0x100001
No Modem Function Group found
Default PCM:

    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Node 0x05 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM

Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x89 0x89]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:

    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22

Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6

     0x18 0x19 0x1a 0x1b 0x1c 0x1d

Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2

     0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2

     0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2

     0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2

     0x05 0x0b

Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0c

Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x0:
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0d

Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0e

Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0f

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a1183f: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0xf
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0e

Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000173c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x99a30130: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 2

     0x0c* 0x0f

Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0d

Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000173c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 2

     0x0c* 0x0f

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI
Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1

     0x06

Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=17
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11

     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Not Set
Address: 1
Function Id: 0x2
Vendor Id: 0x10573055
Subsystem Id: 0x10431316
Revision Id: 0x100700
Modem Function Group: 0x1
--endcollapse--

!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116,  0 Oct 12 15:20 /dev/snd/controlC0
crw-rw----+ 1 root audio 116,  4 Oct 12 15:20 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116,  5 Oct 12 15:20 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116,  1 Oct 12 15:19 /dev/snd/seq

crw-rw----+ 1 root audio 116, 33 Oct 12 15:19 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Oct 12 15:20 .
drwxr-xr-x 3 root root 160 Oct 12 15:20 ..
lrwxrwxrwx 1 root root 12 Oct 12 15:20 pci-0000:00:1b.0 -> ../controlC0

!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****

ARECORD

**** List of CAPTURE Hardware Devices ****

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [Intel]

Card hw:0 'Intel'/'HDA Intel at 0xfebf8000 irq 22'
Mixer name : ''
Components : 'HDA:10ec0660,10431339,00100001 HDA:10573055,10431316,00100700'
Controls : 0
Simple ctrls : 0

!!Alsactl output
!!-------------

--startcollapse--

state.Intel {
	control {
	}
}

--endcollapse--

!!All Loaded Modules
!!------------------

Module
af_packet
snd_hda_codec_realtek
snd_hda_intel
bridge
stp
llc
bnep
sco
rfcomm
l2cap
ipv6
acpi_cpufreq
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
binfmt_misc
cpufreq_powersave
cpufreq_ondemand
freq_table
kvm_intel
kvm
deflate
zlib_deflate
twofish_x86_64
twofish_common
aes_x86_64
aes_generic
blowfish
des_generic
cbc
sha256_generic
sha1_generic
af_key
ext3
jbd
coretemp
hwmon
microcode
loop
btusb
usbhid
snd_hda_codec
bluetooth
snd_hwdep
hid
snd_pcm
snd_seq
snd_timer
snd_seq_device
arc4
snd
soundcore
ecb
iwlagn
iwlcore
psmouse
mac80211
cfg80211
rtc_cmos
video
pcspkr
snd_page_alloc
rtc_core
rfkill
button
evdev
output
asus_laptop
rtc_lib
ac
battery
processor
ext4
mbcache
jbd2
crc16
dm_mod
sg
sr_mod
cdrom
sd_mod
ata_piix
uhci_hcd
sdhci_pci
sdhci
ohci1394
ahci
libata
ieee1394
mmc_core
led_class
scsi_mod
ehci_hcd
usbcore
intel_agp
thermal
fan
unix

!!ALSA/HDA dmesg
!!------------------

[   19.887833] Bluetooth: BNEP filters: protocol multicast
[   51.586561] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   51.586773] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  125.413724] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
#3 lore raw

At Mon, 12 Oct 2009 21:39:21 +0200,

Quoted 13 lines · Luca Tettamanti
Quoted 11 lines · Takashi Iwai

At Sat, 10 Oct 2009 15:01:10 +0200,

Quoted 5 lines · Luca Tettamanti

Hello,
with current git kernel (bd381934) I see a GPF when the snd_hda_intel driver is loaded; the regression is recent, 0eca52a works fine.
The machine is an ASUS laptop (F3Sa), this is the sound card:

Could you load the snd-hda-intel module with probe_only=1 option, and give the output of "alsa-info.sh --no-upload" ?

Quoted 7 lines
Quoted 4 lines

If 0eca52a worked, there are only a few changes regarding hda-intel.

f8f25ba3563dab14b1c3ea4d829642b8a61ca5d7
   ALSA: hda - Add a workaround for ASUS A7K

This is probably related; I haven't actually tested yet, but I have one more information: I had "model=lenovo" in modprobe configuration.

Ah, this is it. I can reproduce the problem with my emulator now. The patch below fixes the issue.

Quoted 7 lines

This was necessary because otherwise the driver applied the quirk for Asus G1, resulting in no sound (see bug
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3513).
The driver works fine without "model" parameter (possibly due to the removal of the quirk entry for the the G1); I get a warning about a timeout when MSI is not enabled though:

Quoted 7 lines

HDA Intel 0000:00:1b.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC660-VD: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018f0900

It's no critical error, but if enable_msi=1 helps, just keep the option. In 2.6.33, MSI will be enabled as default.

thanks,

Takashi

---
From 2d9c648295d7bc376305337d29f540a5e411f632 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Tue, 13 Oct 2009 08:06:55 +0200
Subject: [PATCH] ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/pci/hda/patch_realtek.c +1 -1
index 470fd74..c08ca66 100644
@@ -275,7 +275,7 @@ struct alc_spec {
 	struct snd_kcontrol_new *cap_mixer;	/* capture mixer */
 	unsigned int beep_amp;	/* beep amp value, set via set_beep_amp() */
 
-	const struct hda_verb *init_verbs[5];	/* initialization verbs
+	const struct hda_verb *init_verbs[10];	/* initialization verbs
 						 * don't forget NULL
 						 * termination!
 						 */
Signature · 6 lines
1.6.4.2

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author Tested-by
#4 lore raw
Quoted 17 lines · Takashi Iwai

At Mon, 12 Oct 2009 21:39:21 +0200,

Quoted 15 lines · Luca Tettamanti
Quoted 13 lines · Takashi Iwai

At Sat, 10 Oct 2009 15:01:10 +0200,

Quoted 5 lines · Luca Tettamanti

Hello,
with current git kernel (bd381934) I see a GPF when the snd_hda_intel driver is loaded; the regression is recent, 0eca52a works fine.
The machine is an ASUS laptop (F3Sa), this is the sound card:

Could you load the snd-hda-intel module with probe_only=1 option, and give the output of "alsa-info.sh --no-upload" ?

If 0eca52a worked, there are only a few changes regarding hda-intel.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

f8f25ba3563dab14b1c3ea4d829642b8a61ca5d7
   ALSA: hda - Add a workaround for ASUS A7K

This is probably related; I haven't actually tested yet, but I have one more information: I had "model=lenovo" in modprobe configuration.

Ah, this is it.  I can reproduce the problem with my emulator now. The patch below fixes the issue.

Yup, no more GPF.

Quoted 10 lines

From 2d9c648295d7bc376305337d29f540a5e411f632 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Tue, 13 Oct 2009 08:06:55 +0200
Subject: [PATCH] ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes.  Simply increase the array size to avoid the overflow.

Quoted 21 lines

---
 sound/pci/hda/patch_realtek.c |    2 +-

 1 files changed, 1 insertions(+), 1 deletions(-)
sound/pci/hda/patch_realtek.c +0 -0
index 470fd74..c08ca66 100644
@@ -275,7 +275,7 @@ struct alc_spec {

       struct snd_kcontrol_new *cap_mixer;     /* capture mixer */ unsigned int beep_amp;  /* beep amp value, set via set_beep_amp() */

-       const struct hda_verb *init_verbs[5];   /* initialization verbs
+       const struct hda_verb *init_verbs[10];  /* initialization verbs
                                                * don't forget NULL
                                                * termination! */
--
1.6.4.2