Skip to contentSkip to conversation

snd_hda_intel on linux 2.6.30

DISCUSSION Tony Hoyle 2 participants 2 messages Jun 22, 2009 – Jul 2, 2009

lore
Share & tools
lore

Tony Hoyle

author
#0 lore raw

Hi,

I've been trying to get sound working on a Poulsbo board using 2.6.30. Previously, with the available patches sound worked OK.

2.6.30 has most of the patches already in, and the the Intel HDA is indeed recognized, but no sound appears. Boot logs show:

[   30.948427] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   30.958108] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   30.968030] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   31.192916] input: HDA Intel MID Line In at Ext Rear Jack as /class/input/input3
[   31.204980] input: HDA Intel MID Mic at Ext Front Jack as /class/input/input4
[   31.218872] input: HDA Intel MID Line Out at Ext Rear Jack as /class/input/input5
[   31.234356] input: HDA Intel MID HP Out at Ext Front Jack as /class/input/input6

followed later by

[   50.875374] hda-intel: Invalid position buffer, using LPIB read method instead.
[   50.875416] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

I tried backporting (forward porting?) the missing fixups from the older patch, but apart from adding the message:

[   30.968039] Do fixup for Poulsbo <6>D0 or newer stepping

I still didn't work (of course the possibility I stuffed up my patching looms large there, and I'd rather work with virgin source if it's possible).

What's the best way to go about debugging this? Is there an official (or unofficial) patch for Poulsbo on 2.6.30 knocking around somewhere?

Tony

#1 lore raw

At Mon, 22 Jun 2009 20:49:09 +0100,

Quoted 5 lines · Tony Hoyle

Hi,

I've been trying to get sound working on a Poulsbo board using 2.6.30. Previously, with the available patches sound worked OK.

What kind of patches are they?

Quoted 14 lines

2.6.30 has most of the patches already in, and the the Intel HDA is indeed recognized, but no sound appears. Boot logs show:

[   30.948427] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   30.958108] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) 
-> IRQ 16
[   30.968030] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   31.192916] input: HDA Intel MID Line In at Ext Rear Jack as 
/class/input/input3
[   31.204980] input: HDA Intel MID Mic at Ext Front Jack as 
/class/input/input4
[   31.218872] input: HDA Intel MID Line Out at Ext Rear Jack as 
/class/input/input5
[   31.234356] input: HDA Intel MID HP Out at Ext Front Jack as 
Quoted 1 line

/class/input/input6

These are all OK. The lines with "input" are for jack input layer.

Quoted 6 lines

followed later by

[   50.875374] hda-intel: Invalid position buffer, using LPIB read 
method instead.
[   50.875416] hda-intel: IRQ timing workaround is activated for card 

#0. Suggest a bigger bdl_pos_adj.

These are usually harmless.

Quoted 10 lines

I tried backporting (forward porting?) the missing fixups from the older patch, but apart from adding the message:

[   30.968039] Do fixup for Poulsbo <6>D0 or newer stepping

I still didn't work (of course the possibility I stuffed up my patching looms large there, and I'd rather work with virgin source if it's possible).

What's the best way to go about debugging this? Is there an official (or unofficial) patch for Poulsbo on 2.6.30 knocking around somewhere?

Run alsa-info.sh with --no-upload option on working (old) and non-working (2.6.30) kernels, and compare the generated files.

Takashi