ALSA fixes for 2.6.25-rc2
Subsystems (5)
cover ALSA fixes for 2.6.25-rc2
Hi,
the following patches are fixes for severe ALSA problems on 2.6.25-rc2. Please apply.
thanks,
Takashi
PATCH 1/16 opl3 - Fix compilation without sequencer support
Add proper ifdef's to the patch loading code moved from the old instr layer so that opl3 driver can be compiled without the sequencer support.
--- include/sound/opl3.h | 9 +++++++-- sound/drivers/opl3/opl3_synth.c | 8 ++++++++ 2 files changed, 15 insertions(+), 2 deletions(-)
include/sound/opl3.h +7 -2
@@ -370,12 +370,13 @@ int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device,int snd_opl3_open (struct snd_hwdep * hw,struct file *file);int snd_opl3_ioctl (struct snd_hwdep * hw,struct file *file,unsigned int cmd,unsigned long arg); -long snd_opl3_write (struct snd_hwdep *hw,const char __user *buf,long count, -loff_t *offset);int snd_opl3_release (struct snd_hwdep * hw,struct file *file);void snd_opl3_reset (struct snd_opl3 * opl3); +#if defined(CONFIG_SND_SEQUENCER ) || defined(CONFIG_SND_SEQUENCER_MODULE ) +long snd_opl3_write (struct snd_hwdep *hw,const char __user *buf,long count, +loff_t *offset); int snd_opl3_load_patch(struct snd_opl3 *opl3, int prog, int bank, int type, const char *name,
@@ -384,5 +385,9 @@ int snd_opl3_load_patch(struct snd_opl3 *opl3,struct fm_patch *snd_opl3_find_patch (struct snd_opl3 *opl3,int prog,int bank,int create_patch);void snd_opl3_clear_patches (struct snd_opl3 *opl3); +#else +#define snd_opl3_write NULL +static inline void snd_opl3_clear_patches (struct snd_opl3 *opl3) {} +#endif #endif /* __SOUND_OPL3_H */
sound/drivers/opl3/opl3_synth.c +8 -0
@@ -22,6 +22,10 @@#include <sound/opl3.h> #include <sound/asound_fm.h> +#if defined(CONFIG_SND_SEQUENCER ) || defined(CONFIG_SND_SEQUENCER_MODULE ) +#define OPL3_SUPPORT_SYNTH +#endif +/* * There is 18 possible 2 OP voices * (9 in the left and 9 in the right).
@@ -155,9 +159,11 @@ int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file,#endif return snd_opl3_set_connection (opl3, (int ) arg); +#ifdef OPL3_SUPPORT_SYNTH case SNDRV_DM_FM_IOCTL_CLEAR_PATCHES :snd_opl3_clear_patches (opl3);return 0 ; +#endif #ifdef CONFIG_SND_DEBUG default :
@@ -178,6 +184,7 @@ int snd_opl3_release(struct snd_hwdep * hw, struct file *file)return 0 ; } +#ifdef OPL3_SUPPORT_SYNTH /* * write the device - load patches */
@@ -341,6 +348,7 @@ void snd_opl3_clear_patches(struct snd_opl3 *opl3) }memset (opl3->patch_table,0 ,sizeof (opl3->patch_table)); } +#endif /* OPL3_SUPPORT_SYNTH */ /* ------------------------------ */
Signature · 1 line
1.5.3.8
PATCH 2/16 race between disconnect and error handling in usbmidi
In reply to Takashi IwaiThe driver resubmits URBs from an error handler and schedules the error handler from the URBs' completion handlers. To reliably kill the cycle a flag must be used.
--- sound/usb/usbmidi.c | 19 ++++++++++++++++++- 1 files changed, 18 insertions(+), 1 deletions(-)
sound/usb/usbmidi.c +18 -1
@@ -104,12 +104,14 @@ struct snd_usb_midi {struct usb_protocol_ops * usb_protocol_ops;struct list_head list;struct timer_list error_timer; +spinlock_t disc_lock;struct snd_usb_midi_endpoint {struct snd_usb_midi_out_endpoint *out;struct snd_usb_midi_in_endpoint *in; } endpoints[MIDI_MAX_ENDPOINTS ];unsigned long input_triggered; +unsigned char disconnected; };struct snd_usb_midi_out_endpoint {
@@ -306,6 +308,11 @@ static void snd_usbmidi_error_timer(unsigned long data)struct snd_usb_midi *umidi = (struct snd_usb_midi *)data;int i; +spin_lock (&umidi->disc_lock); +if (umidi->disconnected) { +spin_unlock (&umidi->disc_lock); +return ; + }for (i =0 ; i <MIDI_MAX_ENDPOINTS ; ++i) {struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in;if (in && in->error_resubmit) {
@@ -316,6 +323,7 @@ static void snd_usbmidi_error_timer(unsigned long data)if (umidi->endpoints[i].out)snd_usbmidi_do_output (umidi->endpoints[i].out); } +spin_unlock (&umidi->disc_lock); }/* helper function to send static data that may not DMA-able */
@@ -1049,7 +1057,14 @@ void snd_usbmidi_disconnect(struct list_head* p)int i; umidi = list_entry(p, struct snd_usb_midi, list); -del_timer_sync (&umidi->error_timer); +/* +* an URB's completion handler may start the timer and +* a timer may submit an URB. To reliably break the cycle +* a flag under lock must be used +*/ +spin_lock_irq (&umidi->disc_lock); + umidi->disconnected =1 ; +spin_unlock_irq (&umidi->disc_lock);for (i =0 ; i <MIDI_MAX_ENDPOINTS ; ++i) {struct snd_usb_midi_endpoint * ep = &umidi->endpoints[i];if (ep->out)
@@ -1062,6 +1077,7 @@ void snd_usbmidi_disconnect(struct list_head* p)if (ep->in)usb_kill_urb (ep->in->urb); } +del_timer_sync (&umidi->error_timer); }static void snd_usbmidi_rawmidi_free (struct snd_rawmidi *rmidi)
@@ -1685,6 +1701,7 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip, umidi->quirk = quirk; umidi->usb_protocol_ops = &snd_usbmidi_standard_ops;init_timer (&umidi->error_timer); +spin_lock_init (&umidi->disc_lock); umidi->error_timer.function = snd_usbmidi_error_timer; umidi->error_timer.data = (unsigned long )umidi;
Signature · 1 line
1.5.3.8
PATCH 3/16 oxygen - Fix section mismatch
In reply to Takashi IwaiRemoved invalid __devinit and __devexit that are remaining after split to a helper module.
--- sound/pci/oxygen/oxygen_lib.c | 10 +++++----- sound/pci/oxygen/oxygen_pcm.c | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-)
sound/pci/oxygen/oxygen_lib.c +5 -5
@@ -204,7 +204,7 @@ static void oxygen_proc_read(struct snd_info_entry *entry,mutex_unlock (&chip->mutex); } -static void __devinit oxygen_proc_init (struct oxygen *chip) +static void oxygen_proc_init (struct oxygen *chip) {struct snd_info_entry *entry;
@@ -215,7 +215,7 @@ static void __devinit oxygen_proc_init(struct oxygen *chip)#define oxygen_proc_init (chip)#endif -static void __devinit oxygen_init (struct oxygen *chip) +static void oxygen_init (struct oxygen *chip) {unsigned int i;
@@ -399,8 +399,8 @@ static void oxygen_card_free(struct snd_card *card)pci_disable_device (chip->pci); } -int __devinit oxygen_pci_probe (struct pci_dev *pci,int index,char *id, -int midi,const struct oxygen_model *model) +int oxygen_pci_probe (struct pci_dev *pci,int index,char *id, +int midi,const struct oxygen_model *model) {struct snd_card *card;struct oxygen *chip;
@@ -507,7 +507,7 @@ err_card: }EXPORT_SYMBOL (oxygen_pci_probe); -void __devexit oxygen_pci_remove(struct pci_dev *pci) +void oxygen_pci_remove (struct pci_dev *pci) {snd_card_free (pci_get_drvdata (pci));pci_set_drvdata (pci,NULL );
sound/pci/oxygen/oxygen_pcm.c +1 -1
@@ -634,7 +634,7 @@ static void oxygen_pcm_free(struct snd_pcm *pcm)snd_pcm_lib_preallocate_free_for_all (pcm); } -int __devinit oxygen_pcm_init (struct oxygen *chip) +int oxygen_pcm_init (struct oxygen *chip) {struct snd_pcm *pcm;int outs, ins;
Signature · 1 line
1.5.3.8
PATCH 4/16 hdsp - Fix section mismatch
In reply to Takashi IwaiRemoved invalid __devinit from hdsp_request_fw_loader() and snd_hwdep_create_hwdep() that aren't always init functions.
--- sound/pci/rme9652/hdsp.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)
sound/pci/rme9652/hdsp.c +3 -4
@@ -745,7 +745,7 @@ static int hdsp_get_iobox_version (struct hdsp *hdsp)#ifdef HDSP_FW_LOADER -static int __devinit hdsp_request_fw_loader (struct hdsp *hdsp); +static int hdsp_request_fw_loader (struct hdsp *hdsp);#endif static int hdsp_check_for_firmware (struct hdsp *hdsp,int load_on_demand)
@@ -4688,8 +4688,7 @@ static struct snd_pcm_ops snd_hdsp_capture_ops = { .copy = snd_hdsp_capture_copy, }; -static int __devinit snd_hdsp_create_hwdep (struct snd_card *card, -struct hdsp *hdsp) +static int snd_hdsp_create_hwdep (struct snd_card *card,struct hdsp *hdsp) {struct snd_hwdep *hw;int err;
@@ -4857,7 +4856,7 @@ static int snd_hdsp_create_alsa_devices(struct snd_card *card, struct hdsp *hdsp#ifdef HDSP_FW_LOADER /* load firmware via hotplug fw loader */ -static int __devinit hdsp_request_fw_loader (struct hdsp *hdsp) +static int hdsp_request_fw_loader (struct hdsp *hdsp) {const char *fwfile;const struct firmware *fw;
Signature · 1 line
1.5.3.8
PATCH 5/16 HDA - enable snoop on SCH
In reply to Takashi IwaiThis patch enables snoop on Intel SCH chipset, eliminating static during playback.
--- sound/pci/hda/hda_intel.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
sound/pci/hda/hda_intel.c +21 -0
@@ -275,6 +275,11 @@ enum {#define NVIDIA_HDA_TRANSREG_ADDR 0x4e#define NVIDIA_HDA_ENABLE_COHBITS 0x0f +/* Defines for Intel SCH HDA snoop control */ +#define INTEL_SCH_HDA_DEVC 0x78 +#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) + +/* */
@@ -868,6 +873,8 @@ static void update_pci_byte(struct pci_dev *pci, unsigned int reg,static void azx_init_pci (struct azx *chip) { +unsigned short snoop; +/* Clear bits 0-2 of PCI register TCSEL (at offset 0x44) * TCSEL == Traffic Class Select Register, which sets PCI express QOS * Ensuring these bits are 0 clears playback static on some HD Audio
@@ -888,6 +895,19 @@ static void azx_init_pci(struct azx *chip)NVIDIA_HDA_TRANSREG_ADDR , 0x0f, NVIDIA_HDA_ENABLE_COHBITS);break ; +case AZX_DRIVER_SCH : +pci_read_config_word (chip->pci,INTEL_SCH_HDA_DEVC , &snoop); +if (snoop &INTEL_SCH_HDA_DEVC_NOSNOOP ) { +pci_write_config_word (chip->pci,INTEL_SCH_HDA_DEVC , \ + snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP )); +pci_read_config_word (chip->pci, +INTEL_SCH_HDA_DEVC , &snoop); +snd_printdd ("HDA snoop disabled, enabling ... %s\n" ,\ + (snoop &INTEL_SCH_HDA_DEVC_NOSNOOP ) \ + ?"Failed" :"OK" ); + } +break ; + } }
@@ -1040,6 +1060,7 @@ static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)static unsigned int azx_max_codecs[]__devinitdata = { [AZX_DRIVER_ICH ] =3 , + [AZX_DRIVER_SCH ] =3 , [AZX_DRIVER_ATI ] =4 , [AZX_DRIVER_ATIHDMI ] =4 , [AZX_DRIVER_VIA ] =3 ,/* FIXME: correct? */
Signature · 1 line
1.5.3.8
PATCH 6/16 hda-codec - Fix SPDIF output on Conexant 5045 codec
In reply to Takashi IwaiFixed the SPDIF output on Conexant Cx5045 codec. Added the missing pin output setting and fixed the wrong NID for digital audio-out widget.
--- sound/pci/hda/patch_conexant.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)
sound/pci/hda/patch_conexant.c +5 -2
@@ -488,7 +488,7 @@ static int conexant_ch_mode_put(struct snd_kcontrol *kcontrol,static hda_nid_t cxt5045_dac_nids[1 ] = {0x19 };static hda_nid_t cxt5045_adc_nids[1 ] = {0x1a };static hda_nid_t cxt5045_capsrc_nids[1 ] = {0x1a }; -#define CXT5045_SPDIF_OUT 0x13 +#define CXT5045_SPDIF_OUT 0x18static struct hda_channel_mode cxt5045_modes[1 ] = { {2 ,NULL },
@@ -658,6 +658,7 @@ static struct hda_verb cxt5045_init_verbs[] = { {0x1a ,AC_VERB_SET_AMP_GAIN_MUTE , AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},/* SPDIF route: PCM */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, { 0x13, AC_VERB_SET_CONNECT_SEL, 0x0 },/* EAPD */ {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2 }, /* default on */
@@ -683,6 +684,7 @@ static struct hda_verb cxt5045_benq_init_verbs[] = { {0x1a ,AC_VERB_SET_AMP_GAIN_MUTE , AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},/* SPDIF route: PCM */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},/* EAPD */ {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
@@ -781,7 +783,8 @@ static struct hda_verb cxt5045_test_init_verbs[] = {* PCM format, copyright asserted, no pre-emphasis and no validity * control. */ - {0x13, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},/* Start with output sum widgets muted and their output gains at min */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
Signature · 1 line
1.5.3.8
PATCH 7/16 oxygen: fix line-in recording selection
In reply to Takashi IwaiThe GPIO pin 0 of the CM9780 must be set when muting the line input even on non-Xonar cards.
From: Clemens Ladisch <[email protected]>
--- sound/pci/oxygen/oxygen.c | 35 +++++++++++++++++++++++++++++++++++ 1 files changed, 35 insertions(+), 0 deletions(-)
sound/pci/oxygen/oxygen.c +35 -0
@@ -28,7 +28,9 @@* GPIO 1 -> DFS1 of AK5385 */ +#include <linux/mutex.h> #include <linux/pci.h> +#include <sound/ac97_codec.h> #include <sound/control.h> #include <sound/core.h> #include <sound/initval.h>
@@ -37,6 +39,7 @@#include <sound/tlv.h> #include "oxygen.h" #include "ak4396.h" +#include "cm9780.h" MODULE_AUTHOR ("Clemens Ladisch <[email protected]>" );MODULE_DESCRIPTION ("C-Media CMI8788 driver" );
@@ -75,6 +78,8 @@ MODULE_DEVICE_TABLE(pci, oxygen_ids);#define GPIO_AK5385_DFS_DOUBLE 0x0001#define GPIO_AK5385_DFS_QUAD 0x0002 +#define GPIO_LINE_MUTE CM9780_GPO0 +#define WM8785_R0 0#define WM8785_R1 1#define WM8785_R2 2
@@ -180,16 +185,23 @@ static void wm8785_init(struct oxygen *chip)snd_component_add (chip->card,"WM8785" ); } +static void cmi9780_init (struct oxygen *chip) +{ +oxygen_ac97_clear_bits (chip,0 ,CM9780_GPIO_STATUS ,GPIO_LINE_MUTE ); +} +static void generic_init (struct oxygen *chip) {ak4396_init (chip);wm8785_init (chip); +cmi9780_init (chip); }static void meridian_init (struct oxygen *chip) {ak4396_init (chip);ak5385_init (chip); +cmi9780_init (chip); }static void generic_cleanup (struct oxygen *chip)
@@ -285,6 +297,27 @@ static void set_ak5385_params(struct oxygen *chip, value, GPIO_AK5385_DFS_MASK); } +static void cmi9780_switch_hook (struct oxygen *chip,unsigned int codec, +unsigned int reg,int mute) +{ +if (codec !=0 ) +return ; +switch (reg) { +case AC97_LINE : +oxygen_write_ac97_masked (chip,0 ,CM9780_GPIO_STATUS , + mute ?GPIO_LINE_MUTE :0 , +GPIO_LINE_MUTE ); +break ; +case AC97_MIC : +case AC97_CD : +case AC97_AUX : +if (!mute) +oxygen_ac97_set_bits (chip,0 ,CM9780_GPIO_STATUS , +GPIO_LINE_MUTE ); +break ; + } +} + static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);static int ak4396_control_filter (struct snd_kcontrol_new *template)
@@ -308,6 +341,7 @@ static const struct oxygen_model model_generic = { .set_adc_params = set_wm8785_params, .update_dac_volume = update_ak4396_volume, .update_dac_mute = update_ak4396_mute, + .ac97_switch_hook = cmi9780_switch_hook, .model_data_size = sizeof(struct generic_data), .dac_channels = 8, .used_channels = OXYGEN_CHANNEL_A |
@@ -331,6 +365,7 @@ static const struct oxygen_model model_meridian = { .set_adc_params = set_ak5385_params, .update_dac_volume = update_ak4396_volume, .update_dac_mute = update_ak4396_mute, + .ac97_switch_hook = cmi9780_switch_hook, .model_data_size = sizeof(struct generic_data), .dac_channels = 8, .used_channels = OXYGEN_CHANNEL_B |
Signature · 1 line
1.5.3.8
PATCH 8/16 soc - duplicate strcasecmp test for "rj-master" in mpc8610_hpcd_probe()
In reply to Takashi IwaiIn linus' git tree I found this problem. Is it also in the alsa tree? please confirm it's the right fix. The patch was not yet tested.
From: Roel Kluin <[email protected]>
--- sound/soc/fsl/mpc8610_hpcd.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/fsl/mpc8610_hpcd.c +1 -1
@@ -315,7 +315,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, machine_data->dai_format =SND_SOC_DAIFMT_LEFT_J ; machine_data->codec_clk_direction =SND_SOC_CLOCK_IN ; machine_data->cpu_clk_direction =SND_SOC_CLOCK_OUT ; - }else if (strcasecmp (sprop,"rj-master" ) ==0 ) { + }else if (strcasecmp (sprop,"rj-slave" ) ==0 ) { machine_data->dai_format =SND_SOC_DAIFMT_RIGHT_J ; machine_data->codec_clk_direction =SND_SOC_CLOCK_OUT ; machine_data->cpu_clk_direction =SND_SOC_CLOCK_IN ;
Signature · 1 line
1.5.3.8
PATCH 9/16 hda-codec - Fix race condition in generic bound volume/swtich controls
In reply to Takashi IwaiAttached patch fix race condition in hd_codec generic bound volume/swtich controls
oops on this bug can be easy reproduced by two mixer apps on SMP system with PREEMPT kernel
dmesg:
ALSA /home/ss/ALSA/alsa-driver-1.0.16/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:596:
hda_intel: azx_get_response timeout, switching to polling mode: las
t cmd=0x014f0900
BUG: unable to handle kernel paging request at virtual address 00070006 printing eip: f8f43e95 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915 drm snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss bnep rfcomm hidp l2cap bluetooth w lan_wep acpi_cpufreq coretemp hwmon mmc_block pcspkr psmouse wlan_scan_sta ath_rate_sample snd_hda_intel ath_pci serio_raw wlan tg3 sdhci snd_pcm firewire_o hci mmc_core i2c_i801 snd_timer firewire_core snd_page_alloc ath_hal(P) snd_hwdep snd iTCO_wdt crc_itu_t iTCO_vendor_support shpchp video output acer_acpi b acklight led_class wmi_acer
Pid: 3969, comm: gkrellm Tainted: P (2.6.24-jm #4)
EIP: 0060:[<f8f43e95>] EFLAGS: 00010292 CPU: 0
EIP is at snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
EAX: 00000000 EBX: f7478e00 ECX: f763e000 EDX: f764f788
ESI: 00070002 EDI: edce5e00 EBP: edc3fe64 ESP: edc3fe54
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process gkrellm (pid: 3969, ti=edc3e000 task=f1e4e000 task.ti=edc3e000)
Stack: f764f77c f7478e00 edce5e00 f6dd6000 edc3fe84 f8e590e8 edc7a239 f6d14034
f764f34c f6c0f7e0 edc3ff30 f6d14034 edc3fea8 f8e591b7 edc3ff30 edc3ff2c
00000000 f70aa668 f6d14034 f8e59165 bfbfadb0 edc3ff40 f8e587aa edc3ff2c
Call Trace:
[<c0104fbb>] show_trace_log_lvl+0x1a/0x2f
[<c010506d>] show_stack_log_lvl+0x9d/0xa5
[<c0105119>] show_registers+0xa4/0x1bd
[<c0105354>] die+0x122/0x206
[<c03daccc>] do_page_fault+0x535/0x623
[<c03d940a>] error_code+0x72/0x78
[<f8e590e8>] snd_mixer_oss_get_volume1_vol+0x74/0xf1 [snd_mixer_oss]
[<f8e591b7>] snd_mixer_oss_get_volume1+0x52/0xa5 [snd_mixer_oss]
[<f8e587aa>] snd_mixer_oss_ioctl1+0x673/0x71e [snd_mixer_oss]
[<f8e588af>] snd_mixer_oss_ioctl+0xb/0xd [snd_mixer_oss]
[<c017af0a>] do_ioctl+0x22/0x67
[<c017b186>] vfs_ioctl+0x237/0x24a
[<c017b1ca>] sys_ioctl+0x31/0x4b
[<c010402e>] syscall_call+0x7/0xb
=======================
Code: 3f 49 c7 89 f8 59 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 83 ec 04
8b 70 5c 8b 40 60 05 7c 01 00 00 89 45 f0 e8 c0 3f 49 c7 <8b> 46 04 89 fa 89
4
3 5c 89 d8 8b 0e ff 11 89 73 5c 89 c7 8b 45
EIP: [<f8f43e95>] snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
SS:ESP 0068:edc3fe54
---[ end trace 0a20bc209e9397cc ]---similar issue report present in ALSA bugtracking system
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3652
From: Serge A. Suchkov <[email protected]>
--- sound/pci/hda/hda_codec.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
sound/pci/hda/hda_codec.c +4 -4
@@ -1197,8 +1197,8 @@ int snd_hda_mixer_bind_ctls_info(struct snd_kcontrol *kcontrol,struct hda_bind_ctls *c;int err; - c = (struct hda_bind_ctls *)kcontrol->private_value;mutex_lock (&codec->spdif_mutex);/* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->info (kcontrol, uinfo); kcontrol->private_value = (long )c;
@@ -1213,8 +1213,8 @@ int snd_hda_mixer_bind_ctls_get(struct snd_kcontrol *kcontrol,struct hda_bind_ctls *c;int err; - c = (struct hda_bind_ctls *)kcontrol->private_value;mutex_lock (&codec->spdif_mutex);/* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->get (kcontrol, ucontrol); kcontrol->private_value = (long )c;
@@ -1230,8 +1230,8 @@ int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol,unsigned long *vals;int err =0 , change =0 ; - c = (struct hda_bind_ctls *)kcontrol->private_value;mutex_lock (&codec->spdif_mutex);/* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value;for (vals = c->values; *vals; vals++) { kcontrol->private_value = *vals; err = c->ops->put (kcontrol, ucontrol);
@@ -1251,8 +1251,8 @@ int snd_hda_mixer_bind_tlv(struct snd_kcontrol *kcontrol, int op_flag,struct hda_bind_ctls *c;int err; - c = (struct hda_bind_ctls *)kcontrol->private_value;mutex_lock (&codec->spdif_mutex);/* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->tlv (kcontrol, op_flag, size, tlv); kcontrol->private_value = (long )c;
Signature · 1 line
1.5.3.8
PATCH 10/16 hda-codec - Don't create vmaster if no slaves found
In reply to Takashi IwaiDon't create vmaster controls if no slaves are found in the given list. This prevents the error due to an empty vmaster control.
--- sound/pci/hda/hda_codec.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
sound/pci/hda/hda_codec.c +6 -0
@@ -1055,6 +1055,12 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name,const char **s;int err; +for (s = slaves; *s && !snd_hda_find_mixer_ctl (codec, *s); s++) + ; +if (!*s) { +snd_printdd ("No slave found for %s\n" , name); +return 0 ; + } kctl =snd_ctl_make_virtual_master (name, tlv);if (!kctl)return -ENOMEM ;
Signature · 1 line
1.5.3.8
PATCH 11/16 hda-codec - Fix wrong capture source selection for ALC883 codec
In reply to Takashi IwaiThe widget list of capture source selection for ALC883 contains the wrong NIDs.
--- sound/pci/hda/patch_realtek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
sound/pci/hda/patch_realtek.c +1 -1
@@ -6457,7 +6457,7 @@ static int alc883_mux_enum_put(struct snd_kcontrol *kcontrol,struct alc_spec *spec = codec->spec;const struct hda_input_mux *imux = spec->input_mux;unsigned int adc_idx =snd_ctl_get_ioffidx (kcontrol, &ucontrol->id); -static hda_nid_t capture_mixers[3 ] = {0x24 ,0x23 ,0x22 }; +static hda_nid_t capture_mixers[2 ] = {0x23 ,0x22 };hda_nid_t nid = capture_mixers[adc_idx];unsigned int *cur_val = &spec->cur_mux[adc_idx];unsigned int i, idx;
Signature · 1 line
1.5.3.8
PATCH 12/16 hda-codec - Fix ALC882 capture source selection
In reply to Takashi IwaiThe capture source selection for ADC list with two elements is buggy becaues of a wrong capture mux list. This patch fixes the starting index based on spec->num_adc_nids.
--- sound/pci/hda/patch_realtek.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
sound/pci/hda/patch_realtek.c +5 -1
@@ -5227,10 +5227,14 @@ static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol,const struct hda_input_mux *imux = spec->input_mux;unsigned int adc_idx =snd_ctl_get_ioffidx (kcontrol, &ucontrol->id);static hda_nid_t capture_mixers[3 ] = {0x24 ,0x23 ,0x22 }; -hda_nid_t nid = capture_mixers[adc_idx]; +hda_nid_t nid;unsigned int *cur_val = &spec->cur_mux[adc_idx];unsigned int i, idx; +if (spec->num_adc_nids <3 ) + nid = capture_mixers[adc_idx +1 ]; +else + nid = capture_mixers[adc_idx]; idx = ucontrol->value.enumerated.item[0 ];if (idx >= imux->num_items) idx = imux->num_items -1 ;
Signature · 1 line
1.5.3.8
PATCH 13/16 hda-codec - Fix amp-in values for pin widgets
In reply to Takashi IwaiPin widgets have always one amp-input value regardless of number of connections. The proc file showed values wrongly.
--- sound/pci/hda/hda_proc.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
sound/pci/hda/hda_proc.c +2 -1
@@ -584,7 +584,8 @@ static void print_codec_info(struct snd_info_entry *entry,print_amp_caps (buffer, codec, nid,HDA_INPUT );snd_iprintf (buffer," Amp-In vals: " );print_amp_vals (buffer, codec, nid,HDA_INPUT , - wid_caps &AC_WCAP_STEREO , conn_len); + wid_caps &AC_WCAP_STEREO , + wid_type ==AC_WID_PIN ?1 : conn_len); }if (wid_caps &AC_WCAP_OUT_AMP ) {snd_iprintf (buffer," Amp-Out caps: " );
Signature · 1 line
1.5.3.8
PATCH 14/16 caiaq - fix section mismatch warning
In reply to Takashi IwaiFix following warning:
WARNING: vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the function setup_card() to the function .devinit.text:snd_usb_caiaq_control_init()
setup_card() are only used by init_card().init_card() are only used by snd_probe()snd_probe() are used for the .probe parameter in usb_driver.probe
Annotate them all __devinit to fix the warning.
From: Sam Ravnborg <[email protected]>
--- sound/usb/caiaq/caiaq-device.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
sound/usb/caiaq/caiaq-device.c +3 -3
@@ -245,7 +245,7 @@ int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, tmp, sizeof(tmp)); } -static void setup_card (struct snd_usb_caiaqdev *dev) +static void __devinit setup_card (struct snd_usb_caiaqdev *dev) {int ret;char val[4 ];
@@ -359,7 +359,7 @@ static struct snd_card* create_card(struct usb_device* usb_dev)return card; } -static int init_card (struct snd_usb_caiaqdev *dev) +static int __devinit init_card (struct snd_usb_caiaqdev *dev) {char *c;struct usb_device *usb_dev = dev->chip.dev;
@@ -428,7 +428,7 @@ static int init_card(struct snd_usb_caiaqdev *dev)return 0 ; } -static int snd_probe (struct usb_interface *intf, +static int __devinit snd_probe (struct usb_interface *intf,const struct usb_device_id *id) {int ret;
Signature · 1 line
1.5.3.8
Re: [PATCH 14/16] [ALSA] caiaq - fix section mismatch warning
Hi Takashi.
Quoted 10 lines · Takashi Iwai
Fix following warning:
WARNING:vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the functionsetup_card()to the function .devinit.text:snd_usb_caiaq_control_init()
setup_card()are only used byinit_card().init_card()are only used bysnd_probe()snd_probe()are used for the .probe parameter in usb_driver.probeAnnotate them all
__devinitto fix the warning.From: Sam Ravnborg <[email protected]>
git will not pick up me as author for this patch unless you place the From: at the _first_ line in the commmit.
Nothing to worry for this simple patch - just so you know in the future.
Sam
Re: [PATCH 14/16] [ALSA] caiaq - fix section mismatch warning
At Fri, 22 Feb 2008 19:31:56 +0100,
Quoted 12 lines · Sam Ravnborg
Hi Takashi.
Quoted 7 lines · Takashi Iwai
Fix following warning:
WARNING:vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the functionsetup_card()to the function .devinit.text:snd_usb_caiaq_control_init()
setup_card()are only used byinit_card().init_card()are only used bysnd_probe()snd_probe()are used for the .probe parameter in usb_driver.probe
Quoted 6 lines
Quoted 3 lines
Annotate them all
__devinitto fix the warning.From: Sam Ravnborg <[email protected]>
git will not pick up me as author for this patch unless you place the From: at the _first_ line in the commmit.
Oops, thanks for hints.
Quoted 1 line
Nothing to worry for this simple patch - just so you know in the future.
I'll set up git at the next time, so this won't happen, I hope :)
Takashi
PATCH 15/16 hda-intel - Fix Oops with ATI HDMI devices
In reply to Takashi IwaiThe driver gets Oops with ATI HDMI devices due to the wrong calculation of index for playback streams. This patch fixes it. Reference:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3746
--- sound/pci/hda/hda_intel.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
sound/pci/hda/hda_intel.c +1 -1
@@ -1818,7 +1818,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,*/ chip->playback_streams = (gcap & (0xF <<12 )) >>12 ; chip->capture_streams = (gcap & (0xF <<8 )) >>8 ; - chip->playback_index_offset = (gcap & (0xF <<12 )) >>12 ; + chip->playback_index_offset = chip->capture_streams; chip->capture_index_offset =0 ; }else {/* gcap didn't give any info, switching to old method */
Signature · 1 line
1.5.3.8
PATCH 16/16 bt87X: fix freeing of shared interrupt
In reply to Takashi IwaiCall free_irq() after iounmap() because other devices could trigger our shared interrupt handler.
From: Clemens Ladisch <[email protected]>
--- sound/pci/bt87x.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-)
sound/pci/bt87x.c +3 -6
@@ -681,15 +681,12 @@ static struct snd_kcontrol_new snd_bt87x_capture_source = {static int snd_bt87x_free (struct snd_bt87x *chip) { -if (chip->mmio) { +if (chip->mmio)snd_bt87x_stop (chip); -if (chip->irq >=0 ) -synchronize_irq (chip->irq); - -iounmap (chip->mmio); - }if (chip->irq >=0 )free_irq (chip->irq, chip); +if (chip->mmio) +iounmap (chip->mmio);pci_release_regions (chip->pci);pci_disable_device (chip->pci);kfree (chip);
Signature · 1 line
1.5.3.8