Skip to contentSkip to conversation

opening control devices with "hw:N,M"

DISCUSSION Paul Davis 3 participants 6 messages Jul 18, 2002 – Jul 23, 2002

lore
Share & tools
lore

Paul Davis

author
#0 lore raw

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

--p

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw

At Thu, 18 Jul 2002 09:03:26 -0400,

Quoted 9 lines · Paul Davis

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

do you suppose that the second argument of ctl name is always ignored? the control interface has no device like pcm.

but it's true that having a same naming rule makes the life easier...

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 12 lines · Takashi Iwai

At Thu, 18 Jul 2002 09:03:26 -0400,

Quoted 9 lines · Paul Davis

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

Quoted 4 lines

do you suppose that the second argument of ctl name is always ignored? the control interface has no device like pcm.

but it's true that having a same naming rule makes the life easier...

The 'default' is there for this purpose. Otherwise, application / user must know the right device name.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw

At Sat, 20 Jul 2002 09:08:29 +0200 (CEST),

Quoted 15 lines · Jaroslav
Quoted 12 lines · Takashi Iwai

At Thu, 18 Jul 2002 09:03:26 -0400,

Quoted 9 lines · Paul Davis

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

Quoted 7 lines
Quoted 4 lines

do you suppose that the second argument of ctl name is always ignored? the control interface has no device like pcm.

but it's true that having a same naming rule makes the life easier...

The 'default' is there for this purpose. Otherwise, application / user must know the right device name.

iirc, it's not easy to pass the card/device number to "default" pcm. at least, "default:CARD=1" doesn't work. the easiest way to access a certain card is, so far, only to use "hw:x".
this must be fixed.

also, i thought that ctl.hw is defined purely in /usr/share/alsa/alsa.conf, and tried to redefine this to accept more arguments. but it doesn't change anything. is ctl.hw hardcoded?

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 22 lines · Takashi Iwai

At Sat, 20 Jul 2002 09:08:29 +0200 (CEST),

Quoted 20 lines · Jaroslav
Quoted 16 lines · Takashi Iwai

At Thu, 18 Jul 2002 09:03:26 -0400,

Quoted 9 lines · Paul Davis

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

do you suppose that the second argument of ctl name is always ignored? the control interface has no device like pcm.

but it's true that having a same naming rule makes the life easier...

Quoted 7 lines
Quoted 2 lines

The 'default' is there for this purpose. Otherwise, application / user must know the right device name.

iirc, it's not easy to pass the card/device number to "default" pcm. at least, "default:CARD=1" doesn't work. the easiest way to access a certain card is, so far, only to use "hw:x".
this must be fixed.

I don't agree here. The default is very simple case when the application programmer doesn't want to take care about the right syntax of the device specification.

Anyway, programmers should know that CTL devices are one per card. If there is some real need to correlate PCM handle with CTL handle, then we might create a special function like:

int snd_pcm_get_ctl_name(snd_pcm_t *handle, char **ctl_name);

Quoted 3 lines

also, i thought that ctl.hw is defined purely in /usr/share/alsa/alsa.conf, and tried to redefine this to accept more arguments. but it doesn't change anything. is ctl.hw hardcoded?

Extra things in configuration file are usually parsed as errors.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#5 lore raw

At Mon, 22 Jul 2002 21:21:47 +0200 (CEST),

Quoted 28 lines · Jaroslav
Quoted 25 lines · Takashi Iwai

At Sat, 20 Jul 2002 09:08:29 +0200 (CEST),

Quoted 22 lines · Jaroslav
Quoted 12 lines · Takashi Iwai

At Thu, 18 Jul 2002 09:03:26 -0400,

Quoted 9 lines · Paul Davis

why doesn't this work:

    snd_ctl_open (&handle, "hw:0,0", ...)

it means that you can't use the same standard name format for control devices as PCM devices, which is a bit of problem for programs that need to open both but only want to require the user to specify a single name ...

Quoted 4 lines

do you suppose that the second argument of ctl name is always ignored? the control interface has no device like pcm.

but it's true that having a same naming rule makes the life easier...

The 'default' is there for this purpose. Otherwise, application / user must know the right device name.

Quoted 8 lines
Quoted 4 lines

iirc, it's not easy to pass the card/device number to "default" pcm. at least, "default:CARD=1" doesn't work. the easiest way to access a certain card is, so far, only to use "hw:x".
this must be fixed.

I don't agree here. The default is very simple case when the application programmer doesn't want to take care about the right syntax of the device specification.

ok. so, you think that the default device is anyway exclusive, which is not used for general type to multiple devices.

Quoted 5 lines

Anyway, programmers should know that CTL devices are one per card. If there is some real need to correlate PCM handle with CTL handle, then we might create a special function like:

int snd_pcm_get_ctl_name(snd_pcm_t *handle, char **ctl_name);

it sounds not bad.
in the case of a multi pcm, it's not undetermined, though :)

btw, this reminds me another thing.
we have some controls which related with a certain pcm substream. and so far we have no api to pass this relationship.

well, they are correlated via an index value. yes, but confusingly, a similar control can play a different role on the other driver.

perhaps by similar strategy, we may implement an api function for that.

Quoted 6 lines
Quoted 4 lines

also, i thought that ctl.hw is defined purely in /usr/share/alsa/alsa.conf, and tried to redefine this to accept more arguments. but it doesn't change anything. is ctl.hw hardcoded?

Extra things in configuration file are usually parsed as errors.

err, no, i meant that ctl.hw seems not to be read from the configuration file... most likely i made a stupid mistake. don't take this serious yet.

ciao,

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf