make sbiload to use hwdep interface

diff -r 9b306261208b seq/sbiload/README
@@ -1,4 +1,4 @@ This is sbiload - an OPL2/3 FM instrumen
-This is sbiload - an OPL2/3 FM instrument loader for ALSA sequencer
+This is sbiload - an OPL2/3 FM instrument loader for ALSA hwdep
 
 Written by Uros Bizjak <[email protected]>
 Web: http://www.kss-loka.si/~uros/sbiload.html

@@ -14,62 +14,42 @@ By default it will install into /usr/loc
 By default it will install into /usr/local/bin, change INSTDIR in
 make.conf to change this.
 
-Before use
-----------
-
-Please check that the correct sequencer modules are loaded for your
-sound card. You need to load snd-synth-opl3 module.
-
 Usage
 -----
 
-	loadsbi [-p client:port] [-4] [-l] [-P path] [-v level] instfile drumfile
+	loadsbi [-D device] [-4] [-P path] [-v level] instfile drumfile
 
-	  -p, --port=client:port  - An ALSA client and port number to use
+	  -D, --device=name       - An ALSA hwdep name to use
 	  -4  --opl3              - Four operators (OPL3) file type
-	  -l, --list              - List possible output ports
 	  -P, --path=path         - Specify the patch path
 	  -v, --verbose=level     - Verbose level
 
-Because you may have more than one sound card and each sound
-card may have several MIDI connections, you have to tell sbiload
-which one to use.
+When you have multiple sound cards and/or there may be multiple OPL2/3
+synth devices, you have to tell sbiload which one to use, and pass its
+hwdep name via -D option.  Otherwise, sbiload will load the data onto
+the first found device.
 
-First find out what the possibilities are for your system:
+To find out the hwdep name of the OPL devices,  check
+/proc/asound/hwdep file first.  It has the list of hwdep devices
+currently available on your system.
 
-If you run: 
-	
-	sbiload -l
+	% cat /proc/asound/hwdep
+	00-00: Emux WaveTable
+        00-01: OPL3 FM
+	01-00: OPL3 FM
 
-it will give you a list of the devices. On my system I get: 
-	
-	 Port     Client name                       Port name 
-	 64:0     0: MIDI Synth                     MIDI 0-0 
-	 65:0     OPL3 FM Synth                     OPL3 FM Synth port
+In the example above, you have two OPL3 devices.  To the first one
+(00-01), which means the first card (00-) and the second device (01),
+pass "-D hw:0,1".  For the second OPL3 device (01-00), pass "-D
+hw:1,0" instead.
 
-
-Only OPLx FM Synth port can be used with sbiload. In the example above
-the first one is the external Midi port, and the second is the internal
-four-operator FM synthesizer (OPL3).
-
-If you don't see anything listed then check that the correct ALSA
-modules are loaded as in the section "Before use".
 
 Running sbiload
 ---------------
 
-You specify the port to use with the -p option, or by setting the
-environment variable ALSA_OUT_PORT. 
+Pass the instrument and drum file data as arguments.
 
-For example to use port 0 on client 65 to load four-operator FM
-instrument
-	
-	sbiload -p 65:0 --opl3 std.o3 drums.o3
-
-or 
-	
-	export ALSA_OUT_PORT=65:0 
-	sbiload --opl3 std.o3 drums.o3 
+	% sbiload std.o3 drums.o3
 
 
 Acknowledgements