Fixes for identifying VT1617 codec and MSI-7142 mobo
Hi.
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
--- alsa-kernel/pci/via82xx.c 2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----
{ .vendor = 0x1462, .device = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .vendor = 0x1462, .device = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .vendor = 0x1462, .device = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */
+ { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */
{ .vendor = 0x147b, .device = 0x1401, .action = VIA_DXS_ENABLE }, /* ABIT KD7(-RAID) */ { .vendor = 0x147b, .device = 0x1411, .action = VIA_DXS_ENABLE }, /* ABIT VA-20 */ { .vendor = 0x147b, .device = 0x1413, .action = VIA_DXS_ENABLE }, /* ABIT KV8 Pro */
*** alsa-kernel/pci/ac97/ac97_codec.c.bak 2005-04-25 04:22:20.000000000 -0600
--- alsa-kernel/pci/ac97/ac97_codec.c 2005-07-29 21:46:21.000000000 -0600
***************
*** 157,162 ****
--- 157,163 ----
{ 0x54524123, 0xffffffff, "TR28602", NULL, NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)]
{ 0x54584e20, 0xffffffff, "TLC320AD9xC", NULL, NULL },
{ 0x56494161, 0xffffffff, "VIA1612A", NULL, NULL }, // modified ICE1232 with S/PDIF
+ { 0x56494170, 0xffffffff, "VIA1617A", patch_vt1617a, NULL }, // modified VT1616 with S/PDIF
{ 0x57454301, 0xffffffff, "W83971D", NULL, NULL },
{ 0x574d4c00, 0xffffffff, "WM9701A", NULL, NULL },
{ 0x574d4C03, 0xffffffff, "WM9703,WM9707,WM9708,WM9717", patch_wolfson03, NULL},
*** alsa-kernel/pci/ac97/ac97_patch.c.bak 2005-05-27 03:42:45.000000000 -0600
--- alsa-kernel/pci/ac97/ac97_patch.c 2005-07-29 22:55:50.000000000 -0600
***************
*** 558,563 ****
--- 558,573 ----
}
/*
+ * VT1617A codec
+ */
+ int patch_vt1617a(ac97_t * ac97)
+ {
+ ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
+ ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+ return 0;
+ }
+
+ /*
* Sigmatel STAC97xx codecs
*/
static int patch_sigmatel_stac9700_3d(ac97_t * ac97)
*** alsa-kernel/pci/ac97/ac97_patch.h.bak 2005-04-07 08:53:20.000000000 -0600
--- alsa-kernel/pci/ac97/ac97_patch.h 2005-07-29 21:43:28.000000000 -0600
***************
*** 56,60 ****
--- 56,61 ----
int patch_cm9761(ac97_t * ac97);
int patch_cm9780(ac97_t * ac97);
int patch_vt1616(ac97_t * ac97);
+ int patch_vt1617a(ac97_t * ac97);
int patch_it2646(ac97_t * ac97);
int mpatch_si3036(ac97_t * ac97);
Quoted 16 lines · Philip Prindeville
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
---alsa-kernel/pci/via82xx.c2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----
{ .vendor =0x1462, .device =0x5901, .action =VIA_DXS_NO_VRA}, /* MSI KT6 Delta-SR */ { .vendor =0x1462, .device =0x7023, .action =VIA_DXS_NO_VRA}, /* MSI K8T Neo2-FI */ { .vendor =0x1462, .device =0x7120, .action =VIA_DXS_ENABLE}, /* MSI KT4V */
Review
Quoted 1 line
(quoted diff) +1
-0+ { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */
Did you try VIA_DXS_SRC instead? If it works, it gives more capabilities (any sample rate - not discrete values, and separate sample rates for all 4 DXS channels).
Quoted 27 lines · Sergey Vlasov
Quoted 19 lines · Philip Prindeville
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
---alsa-kernel/pci/via82xx.c2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----Review
Quoted 4 lines
(quoted diff) +1
-0{ .vendor = 0x1462, .device = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .vendor = 0x1462, .device = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .vendor = 0x1462, .device = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */ + { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */
Quoted 5 lines
Did you try
VIA_DXS_SRCinstead? If it works, it gives more capabilities (any sample rate - not discrete values, and separate sample rates for all 4 DXS channels).
Ok. I've built a new image that has that set (I've also added an entry for the K8MM-ILSR which is an identical motherboard but missing video).
How do I add the separate sample rates for the 4 DXS channels, and how do I test all of this?
Thanks,
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Mon, 08 Aug 2005 10:16:41 -0600,
Quoted 36 lines · Philip Prindeville
Quoted 27 lines · Sergey Vlasov
Quoted 19 lines · Philip Prindeville
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
---alsa-kernel/pci/via82xx.c2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----Review
Quoted 4 lines
(quoted diff) +1
-0{ .vendor = 0x1462, .device = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .vendor = 0x1462, .device = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .vendor = 0x1462, .device = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */ + { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */Quoted 5 lines
Did you try
VIA_DXS_SRCinstead? If it works, it gives more capabilities (any sample rate - not discrete values, and separate sample rates for all 4 DXS channels).
Quoted 6 lines
Ok. I've built a new image that has that set (I've also added an entry for the K8MM-ILSR which is an identical motherboard but missing video).
How do I add the separate sample rates for the 4 DXS channels, and how do I test all of this?
The best would be to prepare WAV files in different sapmle rates by converting with sox.
I believe we can merge NO_VRA and SRC. We've made them differently just to be conservative.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Tue, 09 Aug 2005 12:31:57 -0600,
Quoted 67 lines · Philip Prindeville
Quoted 64 lines · Takashi Iwai
At Mon, 08 Aug 2005 10:16:41 -0600,
Quoted 44 lines · Philip Prindeville
Quoted 33 lines · Sergey Vlasov
Quoted 27 lines · Philip Prindeville
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
---alsa-kernel/pci/via82xx.c2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----{ .vendor = 0x1462, .device = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .vendor = 0x1462, .device = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .vendor = 0x1462, .device = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */Review
Quoted 1 line
(quoted diff) +1
-0+ { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */Quoted 7 lines
Did you try
VIA_DXS_SRCinstead? If it works, it gives more capabilities (any sample rate - not discrete values, and separate sample rates for all 4 DXS channels).Quoted 8 lines
Ok. I've built a new image that has that set (I've also added an entry for the K8MM-ILSR which is an identical motherboard but missing video).
How do I add the separate sample rates for the 4 DXS channels, and how do I test all of this?
The best would be to prepare WAV files in different sapmle rates by converting with sox.
I believe we can merge
NO_VRAand SRC. We've made them differently just to be conservative.
Quoted 8 lines
Quoted 3 lines
Takashi
Well, I'm a little stumped... If I use "soundcard detection" on the "lineout" jack,
I can hear audio, but not on the SPDIF port.
Hmm, this sounds like an off-topic? Does DXS_SRC work on your device?
Quoted 6 lines
However, when I use mplayer to
play DVD's with:-ao alsa:device=hw=0.1 -ac hwdts,hwac3,a52,pcm
then I get digital sound out the SPDIF just fine.
Don't do that. The direct access to "hw" is not recommended at all unless you know exactly what you're doing.
Use rather "spdif" PCM (aka "iec958").
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 90 lines · Takashi Iwai
At Tue, 09 Aug 2005 12:31:57 -0600,
Quoted 86 lines · Philip Prindeville
Quoted 82 lines · Takashi Iwai
At Mon, 08 Aug 2005 10:16:41 -0600,
Quoted 54 lines · Philip Prindeville
Quoted 39 lines · Sergey Vlasov
Quoted 31 lines · Philip Prindeville
Can we please commit this minor fixes to the tree? I've been using them and they seem to work fine.
Thanks,
-Philip
*** alsa-kernel/pci/via82xx.c.bak 2005-05-27 04:10:18.000000000 -0600
---alsa-kernel/pci/via82xx.c2005-07-25 20:33:51.000000000 -0600
***************
*** 2174,2179 ****
--- 2174,2180 ----{ .vendor = 0x1462, .device = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .vendor = 0x1462, .device = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .vendor = 0x1462, .device = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */Review
Quoted 1 line
(quoted diff) +1
-0+ { .vendor = 0x1462, .device = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */Quoted 9 lines
Did you try
VIA_DXS_SRCinstead? If it works, it gives more capabilities (any sample rate - not discrete values, and separate sample rates for all 4 DXS channels).Quoted 10 lines
Ok. I've built a new image that has that set (I've also added an entry for the K8MM-ILSR which is an identical motherboard but missing video).
How do I add the separate sample rates for the 4 DXS channels, and how do I test all of this?
The best would be to prepare WAV files in different sapmle rates by converting with sox.
I believe we can merge
NO_VRAand SRC. We've made them differently just to be conservative.Takashi
Quoted 8 lines
Quoted 4 lines
Well, I'm a little stumped... If I use "soundcard detection" on the "lineout" jack, I can hear audio, but not on the SPDIF port.
Hmm, this sounds like an off-topic? Does
DXS_SRCwork on your device?
I tried:
aplay -v -D spdif /usr/share/system-config-soundcard/sound-sample.wav
and that worked ok (I got PCM sound out), but it was at 48kHz. So I tried with -D plug:spdif, and that was at the correct pitch... But I'm confused. If I'm setting:
.action = VIA_DXS_SRC
and:
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_CONTINUOUS;
shouldn't it be able to playback digitally at arbitrary rates? What do I need to change to get it to playback at 44100Hz for testing?
Quoted 11 lines
Quoted 10 lines
However, when I use mplayer to
play DVD's with:-ao alsa:device=hw=0.1 -ac hwdts,hwac3,a52,pcm
then I get digital sound out the SPDIF just fine.
Quoted 8 lines
Don't do that. The direct access to "hw" is not recommended at all unless you know exactly what you're doing.
Use rather "spdif" PCM (aka "iec958").Takashi
Ok, I'll change this. But what would the .asoundrc look like to default everything through "spdif"?
Thanks,
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Thu, 11 Aug 2005 13:21:56 -0600,
Quoted 6 lines · Philip Prindeville
I tried:
aplay -v -D spdif
/usr/share/system-config-soundcard/sound-sample.wavand that worked ok (I got PCM sound out), but it was at 48kHz.
Check /proc/asound/card0/pcm0p/sub3/hw_info whether it's really 48k.
Quoted 11 lines
So I
tried with -D plug:spdif, and that was at the correct pitch... But I'm confused. If I'm setting:.action =
VIA_DXS_SRCand:
ac97->rates[AC97_RATES_SPDIF] =
SNDRV_PCM_RATE_CONTINUOUS;shouldn't it be able to playback digitally at arbitrary rates?
No. SPDIF cannot play arbitrary rates.
Quoted 2 lines
What do I need
to change to get it to playback at 44100Hz for testing?
It shoud work as it is. Otherwise it's a bug.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 16:40:46 +0200,
Quoted 22 lines · 私 wrote:
At Thu, 11 Aug 2005 13:21:56 -0600,
Quoted 6 lines · Philip Prindeville
I tried:
aplay -v -D spdif
/usr/share/system-config-soundcard/sound-sample.wavand that worked ok (I got PCM sound out), but it was at 48kHz.
Check
/proc/asound/card0/pcm0p/sub3/hw_infowhether it's really 48k.Quoted 10 lines
So I
tried with -D plug:spdif, and that was at the correct pitch... But I'm confused. If I'm setting:.action =
VIA_DXS_SRCand:
ac97->rates[AC97_RATES_SPDIF] =
SNDRV_PCM_RATE_CONTINUOUS;
Quoted 8 lines
Quoted 1 line
shouldn't it be able to playback digitally at arbitrary rates?
No. SPDIF cannot play arbitrary rates.
Quoted 2 lines
What do I need
to change to get it to playback at 44100Hz for testing?It shoud work as it is. Otherwise it's a bug.
Does the patch below fix your problem?
Takashi
Index: alsa-kernel/pci/via82xx.c
===================================================================
RCS file: /home/iwai/cvs/alsa/alsa-kernel/pci/via82xx.c,v retrieving revision 1.170
pci/via82xx.c +4 -4
@@ -929,12 +929,12 @@if ((rate_changed =via_lock_rate (&chip->rates[0 ], ac97_rate)) <0 )return rate_changed; -if (rate_changed) { +if (rate_changed)snd_ac97_set_rate (chip->ac97,AC97_PCM_FRONT_DAC_RATE , chip->no_vra ?48000 : runtime->rate); -snd_ac97_set_rate (chip->ac97,AC97_SPDIF , - chip->no_vra ?48000 : runtime->rate); - } +if (chip->spdif_on && viadev->reg_offset ==0x30 ) +snd_ac97_set_rate (chip->ac97,AC97_SPDIF , runtime->rate); +if (runtime->rate ==48000 ) rbits =0xfffff ;else
Well, this is what I get when I try the patch:
[root@media ~]# ./foo
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' :
Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz) please, try the plug plugin (-Dplug:spdif)
Hooks PCM
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16buffer_size : 16384period_size : 4096period_time : 85333tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 4096xfer_align : 4096start_threshold : 16384stop_threshold : 16384silence_threshold: 0silence_size : 0
boundary : 4611686018427387904
Slave: Hardware PCM card 0 'VIA 8237' device 0 subdevice 3
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16buffer_size : 16384period_size : 4096period_time : 85333tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 4096xfer_align : 4096start_threshold : 16384stop_threshold : 16384silence_threshold: 0silence_size : 0
boundary : 4611686018427387904
access: RW_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 48000 (48000/1)period_size: 4096buffer_size: 16384tick_time: 1000
[root@media ~]#
I also noticed that it sounds like the first 200ms or so of sound is being dropped consistently...
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 2 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 8 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 3 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Quoted 7 lines
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.Takashi
No sound at all.
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 11:31:19 -0600,
Quoted 15 lines · Philip Prindeville
Quoted 12 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 3 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.
Quoted 5 lines
Quoted 3 lines
Takashi
No sound at all.
This can't happen with a proper mixer setting if you can hear from hw:0,1.
My question was whether aplay complains about the sample rate like spdif PCM.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 32 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:31:19 -0600,
Quoted 19 lines · Philip Prindeville
Quoted 15 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 5 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.Quoted 8 lines
Quoted 5 lines
Takashi
No sound at all.
Quoted 10 lines
This can't happen with a proper mixer setting if you can hear from hw:0,1.
My question was whether aplay complains about the sample rate like spdif PCM.
Takashi
Actually, with "aplay -Dhw:0,1 ..." I don't hear any sound either.
BTW: How does aplay detect which bitrates the card will support? It keeps telling me the card won't do 44100Hz:
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:spdif)
Hooks PCM
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 11:38:28 -0600,
Quoted 42 lines · Philip Prindeville
Quoted 39 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:31:19 -0600,
Quoted 19 lines · Philip Prindeville
Quoted 15 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 5 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.Quoted 8 lines
Quoted 5 lines
Takashi
No sound at all.
This can't happen with a proper mixer setting if you can hear from hw:0,1.
My question was whether aplay complains about the sample rate like spdif PCM.
Quoted 5 lines
Quoted 3 lines
Takashi
Actually, with "aplay -Dhw:0,1 ..." I don't hear any sound either.
Then it's a problem of mixer configuration or physical connection.
Quoted 1 line
BTW: How does aplay detect which bitrates the card will support?
It checks the value of snd_pcm_hw_params_set_rate_near().
Quoted 7 lines
It keeps
telling me the card won't do 44100Hz:Playing WAVE '
/usr/share/system-config-soundcard/sound-sample.wav' :
Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:spdif)
Well I see this message in your ealier mail. What about the result of "aplay -Dhw0,0" regarding this?
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 63 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:38:28 -0600,
Quoted 59 lines · Philip Prindeville
Quoted 55 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:31:19 -0600,
Quoted 25 lines · Philip Prindeville
Quoted 19 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:08:17 -0600,
Quoted 7 lines · Philip Prindeville
Well, this is what I get when I try the patch:
Hmm, what happens with "aplay -Dhw:0,0" ?
If this fails, the problem must be in the wrong DXS entry.Quoted 12 lines
Quoted 7 lines
Takashi
No sound at all.
This can't happen with a proper mixer setting if you can hear from hw:0,1.
My question was whether aplay complains about the sample rate like spdif PCM.
Takashi
Quoted 7 lines
Quoted 3 lines
Actually, with "aplay -Dhw:0,1 ..." I don't hear any sound either.
Then it's a problem of mixer configuration or physical connection.
Ah, sorry... Should I have been listening on an analogue input on my receiver instead? Ok, switched... with -Dhw0,1 on an analogue port (and keeping VIA_DXS_SRC) I hear signal. My settings are:
[root@media ~]# amixer -c0
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 22 [71%] [on]
Front Right: Playback 22 [71%] [on]
Simple mixer control '3D Control - Center',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 15
Mono: 0 [0%]
Simple mixer control '3D Control - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 15
Mono: 0 [0%]
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 23 [74%] [on]
Front Right: Playback 23 [74%] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 22 [71%] [on] Capture [off]
Front Right: Playback 22 [71%] [on] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 22 [71%] [on] Capture [off]
Front Right: Playback 22 [71%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [on]
Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 22 [71%] [on]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 15 [100%] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 22 [71%] [on] Capture [off]
Front Right: Playback 22 [71%] [on] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [on]
Front Right: Capture 0 [0%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
[root@media ~]#
Also get signal with -Dhw0,0 on an analogue port...
(Still the same warning about the rate mismatch, though...)
Quoted 10 lines
Quoted 6 lines
BTW: How does aplay detect which bitrates the card will support?
It checks the value of
snd_pcm_hw_params_set_rate_near().
I tried not changing ac97->rates[AC97_RATES_SPDIF] at all, but that didn't make any difference...
Quoted 11 lines
Quoted 10 lines
It keeps
telling me the card won't do 44100Hz:Playing WAVE '
/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:spdif)
Quoted 7 lines
Well I see this message in your ealier mail. What about the result of "aplay -Dhw0,0" regarding this?
Takashi
Ditto:
[root@media ~]# aplay -v -Dhw:0,0 /usr/share/system-config-soundcard/sound-sample.wav
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:hw:0,0)
Hardware PCM card 0 'VIA 8237' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16buffer_size : 16384period_size : 4096period_time : 85333tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 4096xfer_align : 4096start_threshold : 16384stop_threshold : 16384silence_threshold: 0silence_size : 0
boundary : 4611686018427387904
[root@media ~]#
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 12:12:28 -0600,
Quoted 11 lines · Philip Prindeville
Quoted 8 lines
Well I see this message in your ealier mail. What about the result of "aplay -Dhw0,0" regarding this?
Takashi
Ditto:
Quoted 7 lines
[root@media ~]# aplay -v -Dhw:0,0
/usr/share/system-config-soundcard/sound-sample.wavPlaying WAVE '/usr/share/system-config-soundcard/sound-sample.wav' :
Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:hw:0,0)
Hardware PCM card 0 'VIA 8237' device 0 subdevice 0
This means that dxs_support is still set to DXS_48K, not DXS_SRC as expected.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 23 lines · Takashi Iwai
At Fri, 12 Aug 2005 12:12:28 -0600,
Quoted 9 lines · Philip Prindeville
Quoted 9 lines
Well I see this message in your ealier mail. What about the result of "aplay -Dhw0,0" regarding this?
Takashi
Quoted 9 lines
Ditto:
[root@media ~]# aplay -v -Dhw:0,0
/usr/share/system-config-soundcard/sound-sample.wav
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:hw:0,0)
Hardware PCM card 0 'VIA 8237' device 0 subdevice 0
Quoted 7 lines
This means that
dxs_supportis still set toDXS_48K, notDXS_SRCas expected.Takashi
Zowie, you're right:
[root@media alsa]# lspci -v -n -s 0:11.5 00:11.5 Class 0401: 1106:3059 (rev 60)
Subsystem: 1462:0430
Flags: medium devsel, IRQ 185
I/O ports at ec00 [size=256]
Capabilities: [c0] Power Management version 2
[root@media alsa]#
So for whatever reason, the sound device has a different ID than the motherboard...
via82xx: pci-id 0x1462:0x430
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine.
Ok, so I patched the PCI id, and now I'm not seeing the above warning any more, but I *still* get:
[root@media alsa]# aplay -v -D spdif /usr/share/system-config-soundcard/sound-sample.wav
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:spdif)
Hooks PCM
...
But when I play hw:0,0 out an analogue port, it works:
[root@media alsa]# aplay -v -Dhw:0,0 /usr/share/system-config-soundcard/sound-sample.wav
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Hardware PCM card 0 'VIA 8237' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16buffer_size : 16384period_size : 4096period_time : 92879tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 4096xfer_align : 4096start_threshold : 16384stop_threshold : 16384silence_threshold: 0silence_size : 0
boundary : 4611686018427387904
[root@media alsa]#
I took out the setting of the speed from patch_vt1617a:
+ int patch_vt1617a(ac97_t * ac97)
+ {
+ ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
+ return 0;
+ }
+
+ /*
so now it defaults to 32kHz, 44.1kHz, and 48kHz.... no idea why playing via -D spdif should fail, unless the config files in /etc/alsa/ are wrong.
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 11 lines · Philip Prindeville
I took out the setting of the speed from
patch_vt1617a:+ int
patch_vt1617a(ac97_t * ac97)
+ {
+ac97->ext_id|=AC97_EI_SPDIF; /* force the detection of
spdif */(quoted diff) +4
-0+ return 0; + } + + /*
Quoted 4 lines
so now it defaults to 32kHz, 44.1kHz, and 48kHz.... no idea why playing via -D spdif should fail, unless the config files in
/etc/alsa/are wrong.-Philip
Sorry... wrong language. It doesn't fail. It continues to play, but at 48kHz and not at the desired 44.1kHz.
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 13:49:58 -0600,
Quoted 18 lines · Philip Prindeville
Quoted 15 lines · Philip Prindeville
I took out the setting of the speed from
patch_vt1617a:+ int
patch_vt1617a(ac97_t * ac97)
+ {
+ac97->ext_id|=AC97_EI_SPDIF; /* force the detection of
spdif */(quoted diff) +4
-0+ return 0; + } + + /*so now it defaults to 32kHz, 44.1kHz, and 48kHz.... no idea why playing via -D spdif should fail, unless the config files in
/etc/alsa/are wrong.
Quoted 5 lines
Quoted 1 line
-Philip
Sorry... wrong language. It doesn't fail. It continues to play, but at 48kHz and not at the desired 44.1kHz.
You need the patch I sent earlier.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 6 lines · Takashi Iwai
At Thu, 11 Aug 2005 13:21:56 -0600,
Quoted 2 lines · Philip Prindeville
I tried:
Quoted 9 lines
Quoted 5 lines
aplay -v -D spdif
/usr/share/system-config-soundcard/sound-sample.wavand that worked ok (I got PCM sound out), but it was at 48kHz.
Check
/proc/asound/card0/pcm0p/sub3/hw_infowhether it's really 48k.
Yup:
access: RW_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 48000 (48000/1)period_size: 4096buffer_size: 16384tick_time: 1000
though I still don't understand why it would be that device and not pcm1p/sub0/ instead...
Quoted 10 lines
Quoted 10 lines
So I
tried with -D plug:spdif, and that was at the correct pitch... But I'm confused. If I'm setting:.action =
VIA_DXS_SRCand:
Quoted 9 lines
Quoted 5 lines
ac97->rates[AC97_RATES_SPDIF] =
SNDRV_PCM_RATE_CONTINUOUS;shouldn't it be able to playback digitally at arbitrary rates?
No. SPDIF cannot play arbitrary rates.
But it can play 44100, right?
Quoted 11 lines
Quoted 4 lines
What do I need
to change to get it to playback at 44100Hz for testing?It shoud work as it is. Otherwise it's a bug.
Takashi
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 2 lines · Philip Prindeville
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
Because you have one soundcard (VT1617) with multiple subdevices on it (at least S/PDIF and analog).
Lee
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 8 lines · Lee Revell
Quoted 4 lines · Philip Prindeville
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
Quoted 7 lines
Because you have one soundcard (VT1617) with multiple subdevices on it (at least S/PDIF and analog).
Lee
But that explains just having card 0. The analog and digital portions are separate devices, aren't they (on the same card)?
-Philip
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 8 lines · Lee Revell
Quoted 4 lines · Philip Prindeville
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
Quoted 7 lines
Because you have one soundcard (VT1617) with multiple subdevices on it (at least S/PDIF and analog).
Lee
Forgot to include:
[root@media SOURCES]# aplay -l
**** List of PLAYBACK Hardware Devices **** card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237]
Subdevices: 4/4
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
card 0: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@media SOURCES]#
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
At Fri, 12 Aug 2005 11:26:33 -0400,
Quoted 7 lines · Lee Revell
Quoted 2 lines · Philip Prindeville
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
Because you have one soundcard (VT1617) with multiple subdevices on it (at least S/PDIF and analog).
Well, the thing is a bit more complicated.
The device 0 is basically for DXS channels. You can open multiple streams with own DXS channel. The fourth channel is a special one which is used also for the dedicated SPDIF output when the register bit is on. That's why 0,3,0 is chosen for SPDIF.
The device 1 is for multi-channel outputs, i.e. 4.0 and 5.1 outputs. This is an exclusive device, and the access to DXS channels are disabled when this stream is used. The SPDIF seems working casullay with this device, too.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Fri, 12 Aug 2005 10:45:39 -0600,
Quoted 45 lines · Philip Prindeville
Quoted 23 lines · Takashi Iwai
At Fri, 12 Aug 2005 11:26:33 -0400,
Quoted 11 lines · Lee Revell
Quoted 4 lines · Philip Prindeville
I don't understand why it's device 0, subdevice 3.... instead of being device 1, subdevice 0.
Because you have one soundcard (VT1617) with multiple subdevices on it (at least S/PDIF and analog).
Well, the thing is a bit more complicated.
The device 0 is basically for DXS channels. You can open multiple streams with own DXS channel. The fourth channel is a special one which is used also for the dedicated SPDIF output when the register bit is on. That's why 0,3,0 is chosen for SPDIF.
Quoted 9 lines
The device 1 is for multi-channel outputs, i.e. 4.0 and 5.1 outputs. This is an exclusive device, and the access to DXS channels are disabled when this stream is used. The SPDIF seems working casullay with this device, too.
Takashi
Ok, last question... I can't unload the "
snd_via82xx" driver without rebooting:[root@media alsa-driver-1.0.9b]# lsmod | grep "^snd_via"
snd_via82xx35872 1
[root@media alsa-driver-1.0.9b]# rmmodsnd_via82xx
ERROR: Modulesnd_via82xxis in use
[root@media alsa-driver-1.0.9b]#
Quoted 3 lines
The use-count is 1, even though no modules are listed (on the right hand side
as having been associated with this module)...
It's totally off-topic :)
Check "fuser /dev/snd/pcmC0*" whether any devices are using the PCM.
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf