ALSA: hda: runtime PM is always active
PATCH 1/1 ALSA: hda: runtime PM is always active
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
This patch avoides incrementing runtime PM usage count of the device.
--- sound/hda/hdac_device.c | 6 ------ 1 file changed, 6 deletions(-)
sound/hda/hdac_device.c +0 -6
@@ -31,9 +31,6 @@ static void default_release(struct device *dev)* * Returns zero for success or a negative error code. * -* This function increments the runtime PM counter and marks it active. -* The caller needs to turn it off appropriately later. -* * The caller needs to set the device's release op properly by itself. */ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,
@@ -55,8 +52,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus, codec->bus = bus; codec->addr = addr; codec->type =HDA_DEV_CORE ; -pm_runtime_set_active (&codec->dev); -pm_runtime_get_noresume (&codec->dev);atomic_set (&codec->in_pm,0 ); err =snd_hdac_bus_add_device (bus, codec);
@@ -123,7 +118,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);*/ void snd_hdac_device_exit (struct hdac_device *codec) { -pm_runtime_put_noidle (&codec->dev);snd_hdac_bus_remove_device (codec->bus, codec);kfree (codec->vendor_name);kfree (codec->chip_name);
Signature · 1 line
2.7.4
Quoted 7 lines · Sameer Pujar
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
Quoted 5 lines
This patch avoides incrementing runtime PM usage count of the device.
Signed-off-by Sameer Pujar <[email protected]>Reviewed-by Ravindra Lokhande <[email protected]>Reviewed-by Mohan Kumar D <[email protected]>
This breaks the existing things, I'm afraid.
Did you really test and verify the behavior...?
The runtime PM refcount is decremented at snd_hda_codec_register(), and that's the place to let runtime suspend of the codec really effective. (It's not about the controller, though.)
thanks,
Takashi
Quoted 39 lines
--- sound/hda/hdac_device.c | 6 ------ 1 file changed, 6 deletions(-)sound/hda/hdac_device.c +0
-6@@ -31,9 +31,6 @@ static void default_release(struct device *dev)* * Returns zero for success or a negative error code. * -* This function increments the runtime PM counter and marks it active. -* The caller needs to turn it off appropriately later. -* * The caller needs to set the device's release op properly by itself. */ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,@@ -55,8 +52,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus, codec->bus = bus; codec->addr = addr; codec->type =HDA_DEV_CORE ; -pm_runtime_set_active (&codec->dev); -pm_runtime_get_noresume (&codec->dev);atomic_set (&codec->in_pm,0 ); err =snd_hdac_bus_add_device (bus, codec);@@ -123,7 +118,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);*/ void snd_hdac_device_exit (struct hdac_device *codec) { -pm_runtime_put_noidle (&codec->dev);snd_hdac_bus_remove_device (codec->bus, codec);kfree (codec->vendor_name);kfree (codec->chip_name);Signature · 1 line
2.7.4
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Sameer Pujar
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
This patch avoides incrementing runtime PM usage count of the device.
Signed-off-by Sameer Pujar <[email protected]>Reviewed-by Ravindra Lokhande <[email protected]>Reviewed-by Mohan Kumar D <[email protected]>
Quoted 7 lines
This breaks the existing things, I'm afraid.
Did you really test and verify the behavior...?The runtime PM refcount is decremented at
snd_hda_codec_register(), and that's the place to let runtime suspend of the codec really effective. (It's not about the controller, though.)
It worked fine at my end. I could put the device to runtime suspend and resume it back multiple times. Since you are suggesting it could break things, let me rework on the patch and dig up a little more to see if there is better way to fix this.
Thanks,
Sameer.
Quoted 44 lines
thanks,
Takashi
Quoted 39 lines
--- sound/hda/hdac_device.c | 6 ------ 1 file changed, 6 deletions(-)sound/hda/hdac_device.c +0
-6@@ -31,9 +31,6 @@ static void default_release(struct device *dev)* * Returns zero for success or a negative error code. * -* This function increments the runtime PM counter and marks it active. -* The caller needs to turn it off appropriately later. -* * The caller needs to set the device's release op properly by itself. */ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,@@ -55,8 +52,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus, codec->bus = bus; codec->addr = addr; codec->type =HDA_DEV_CORE ; -pm_runtime_set_active (&codec->dev); -pm_runtime_get_noresume (&codec->dev);atomic_set (&codec->in_pm,0 ); err =snd_hdac_bus_add_device (bus, codec);@@ -123,7 +118,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);*/ void snd_hdac_device_exit (struct hdac_device *codec) { -pm_runtime_put_noidle (&codec->dev);snd_hdac_bus_remove_device (codec->bus, codec);kfree (codec->vendor_name);kfree (codec->chip_name);Signature · 1 line
2.7.4
Quoted 23 lines · Sameer Pujar
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Sameer Pujar
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
This patch avoides incrementing runtime PM usage count of the device.
Signed-off-by Sameer Pujar <[email protected]>Reviewed-by Ravindra Lokhande <[email protected]>Reviewed-by Mohan Kumar D <[email protected]>Quoted 7 lines
This breaks the existing things, I'm afraid.
Did you really test and verify the behavior...?The runtime PM refcount is decremented at
snd_hda_codec_register(), and that's the place to let runtime suspend of the codec really effective. (It's not about the controller, though.)
Quoted 5 lines
It worked fine at my end. I could put the device to runtime suspend and resume it back multiple times.
Since you are suggesting it could break things, let me rework on the patch and dig up a little more to
see if there is better way to fix this.
Well, I don't see what you want to "fix". Do you see any bug?
thanks,
Takashi
Quoted 48 lines
Thanks,
Sameer.Quoted 43 lines
thanks,
Takashi
Quoted 38 lines
--- sound/hda/hdac_device.c | 6 ------ 1 file changed, 6 deletions(-)sound/hda/hdac_device.c +0
-6@@ -31,9 +31,6 @@ static void default_release(struct device *dev)* * Returns zero for success or a negative error code. * -* This function increments the runtime PM counter and marks it active. -* The caller needs to turn it off appropriately later. -* * The caller needs to set the device's release op properly by itself. */ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,@@ -55,8 +52,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus, codec->bus = bus; codec->addr = addr; codec->type =HDA_DEV_CORE ; -pm_runtime_set_active (&codec->dev); -pm_runtime_get_noresume (&codec->dev);atomic_set (&codec->in_pm,0 ); err =snd_hdac_bus_add_device (bus, codec);@@ -123,7 +118,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);*/ void snd_hdac_device_exit (struct hdac_device *codec) { -pm_runtime_put_noidle (&codec->dev);snd_hdac_bus_remove_device (codec->bus, codec);kfree (codec->vendor_name);kfree (codec->chip_name);Signature · 1 line
2.7.4
Quoted 24 lines · Takashi Iwai
Quoted 22 lines · Sameer Pujar
Quoted 20 lines · Takashi Iwai
Quoted 11 lines · Sameer Pujar
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
This patch avoides incrementing runtime PM usage count of the device.
Signed-off-by Sameer Pujar <[email protected]>Reviewed-by Ravindra Lokhande <[email protected]>Reviewed-by Mohan Kumar D <[email protected]>This breaks the existing things, I'm afraid.
Did you really test and verify the behavior...?The runtime PM refcount is decremented at
snd_hda_codec_register(), and that's the place to let runtime suspend of the codec really effective. (It's not about the controller, though.)
Quoted 6 lines
Quoted 5 lines
It worked fine at my end. I could put the device to runtime suspend and resume it back multiple times.
Since you are suggesting it could break things, let me rework on the patch and dig up a little more to
see if there is better way to fix this.Well, I don't see what you want to "fix". Do you see any bug?
I was expecting the device to be runtime suspended, once probe is finished, until I playback something on it. But it appears that rutntime PM is always active and runtime PM suspend callback never happens.
Quoted 50 lines
thanks,
Takashi
Quoted 46 lines
Thanks,
Sameer.Quoted 43 lines
thanks,
Takashi
Quoted 38 lines
--- sound/hda/hdac_device.c | 6 ------ 1 file changed, 6 deletions(-)sound/hda/hdac_device.c +0
-6@@ -31,9 +31,6 @@ static void default_release(struct device *dev)* * Returns zero for success or a negative error code. * -* This function increments the runtime PM counter and marks it active. -* The caller needs to turn it off appropriately later. -* * The caller needs to set the device's release op properly by itself. */ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,@@ -55,8 +52,6 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus, codec->bus = bus; codec->addr = addr; codec->type =HDA_DEV_CORE ; -pm_runtime_set_active (&codec->dev); -pm_runtime_get_noresume (&codec->dev);atomic_set (&codec->in_pm,0 ); err =snd_hdac_bus_add_device (bus, codec);@@ -123,7 +118,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);*/ void snd_hdac_device_exit (struct hdac_device *codec) { -pm_runtime_put_noidle (&codec->dev);snd_hdac_bus_remove_device (codec->bus, codec);kfree (codec->vendor_name);kfree (codec->chip_name);Signature · 1 line
2.7.4
Quoted 32 lines · Sameer Pujar
Quoted 29 lines · Takashi Iwai
Quoted 27 lines · Sameer Pujar
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Sameer Pujar
The runtime PM count is incremented and set to active during hda codec device init, but it is decremented and set to suspend during exit only. Hence the runtime PM status is always active and hda device cannot be put to runtime suspend. Keeping device usage active for entire period, though nothing really happening on the device, seems unnecessary.
This patch avoides incrementing runtime PM usage count of the device.
Signed-off-by Sameer Pujar <[email protected]>Reviewed-by Ravindra Lokhande <[email protected]>Reviewed-by Mohan Kumar D <[email protected]>Quoted 7 lines
This breaks the existing things, I'm afraid.
Did you really test and verify the behavior...?The runtime PM refcount is decremented at
snd_hda_codec_register(), and that's the place to let runtime suspend of the codec really effective. (It's not about the controller, though.)It worked fine at my end. I could put the device to runtime suspend and resume it back multiple times.
Since you are suggesting it could break things, let me rework on the patch and dig up a little more to
see if there is better way to fix this.
Quoted 5 lines
Quoted 1 line
Well, I don't see what you want to "fix". Do you see any bug?
I was expecting the device to be runtime suspended, once probe is finished, until I playback something on it.
But it appears that rutntime PM is always active and runtime PM suspend callback never happens.
Does the behavior really appear? If so, it's a bug.
The current design is to enable the runtime PM *after* the device registration. Otherwise it makes no sense -- the problem doesn't finish yet before that point.
thanks,
Takashi