Skip to contentSkip to conversation

realtek ALC272 support

DISCUSSION Andres Salomon 2 participants 13 messages Apr 28, 2009 – May 4, 2009 9 messages not in the archive Sound

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): s5hljpp3z2w.wl%[email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): s5hocujwuhb.wl%[email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): s5hprey3yc5.wl%[email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): s5hbpqi3wqy.wl%[email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#9 lore raw
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines

At Fri, 24 Apr 2009 15:24:15 -0400,

Quoted 26 lines · Andres Salomon

Hi Kailang,

I noticed that your name was on the ALC272 support patch for ALSA intel-hda. This patch basically sets ALC272 to use (mostly) the same code as ALC662. I have two machines that have ALC272, and both of them need verb tables in order to function. I'm wondering if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch (there are further commits I made in order to support headphone mic stuff), but it gives you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a specific patch_alc272 function that could be written to rid ourselves of these specific quirks. Are there machines with ALC272 that are functional with the current ALSA code?

[...]

Quoted 10 lines
Quoted 9 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3853: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

According to the ALC272 data sheet (the block diagram on page 5), there are actually 2 line_out NIDs; 0x14 and 0x15. The default pin configs for these two NIDs (0x411111f0 for both) have the Port Connectivity field set to AC_JACK_PORT_NONE, so the auto-config skips those NIDs.

If I provide an override to a) set Port Connectivity to AC_JACK_PORT_COMPLEX, and b) set Default Device to AC_JACK_LINE_OUT (from AC_JACK_SPEAKER), I get usable audio (speakers work, headphone works, headphone plugging mutes the speaker properly, and even the mic works). The patch which I've used is below.

Clearly, this isn't a very nice solution, so the question is:
is there a way to provide an override/quirk for pincfgs (I see one for HWDEP, but that's configuration-specific) within the current hda_codec framework for this specific codec/laptop? Alternatively, I can try and figure out what's wrong with the code in the case where line_out_pins[0] is set to the speaker_out_pins[0] (ie, NID 0x17 in this case).

I can check the other ALC272 machine tomorrow (the DELL_ZM1) to see if the line_out hack enables it to work without the verb table.

sound/pci/hda/hda_codec.c +9 -0
index b91f6ed..5aa7a0c 100644
@@ -3644,6 +3644,15 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
 			continue;
 
 		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		snd_printd("nid %x: pincfg def_conf=%x\n", nid, def_conf);
+		if (codec->vendor_id == 0x10ec0272 &&
+				(nid == 0x14 || nid == 0x15)) {
+			def_conf &= ~(0x3 << AC_DEFCFG_PORT_CONN_SHIFT);
+			def_conf &= ~(0xf << AC_DEFCFG_DEVICE_SHIFT);
+			snd_printd("nid %x: overriding def_conf, now %x\n", nid,
+					def_conf);
+		}
+
 		if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
 			continue;
 		loc = get_defcfg_location(def_conf);
#10 lore raw

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 67 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines

At Fri, 24 Apr 2009 15:24:15 -0400,

Quoted 26 lines · Andres Salomon

Hi Kailang,

I noticed that your name was on the ALC272 support patch for ALSA intel-hda. This patch basically sets ALC272 to use (mostly) the same code as ALC662. I have two machines that have ALC272, and both of them need verb tables in order to function. I'm wondering if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch (there are further commits I made in order to support headphone mic stuff), but it gives you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a specific patch_alc272 function that could be written to rid ourselves of these specific quirks. Are there machines with ALC272 that are functional with the current ALSA code?

[...]

Quoted 10 lines
Quoted 9 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3853: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 4 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

#11 lore raw
Quoted 76 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 69 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines

At Fri, 24 Apr 2009 15:24:15 -0400,

Quoted 27 lines · Andres Salomon

Hi Kailang,

I noticed that your name was on the ALC272 support patch for ALSA intel-hda. This patch basically sets ALC272 to use (mostly) the same code as ALC662. I have two machines that have ALC272, and both of them need verb tables in order to function. I'm wondering if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch (there are further commits I made in order to support headphone mic stuff), but it gives you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a specific patch_alc272 function that could be written to rid ourselves of these specific quirks. Are there machines with ALC272 that are functional with the current ALSA code?

[...]

Quoted 11 lines
Quoted 10 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 4 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

And, as I said, I get no sound output with this..

#12 lore raw

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 88 lines · Andres Salomon
Quoted 76 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 69 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines

At Fri, 24 Apr 2009 15:24:15 -0400,

Quoted 27 lines · Andres Salomon

Hi Kailang,

I noticed that your name was on the ALC272 support patch for ALSA intel-hda. This patch basically sets ALC272 to use (mostly) the same code as ALC662. I have two machines that have ALC272, and both of them need verb tables in order to function. I'm wondering if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch (there are further commits I made in order to support headphone mic stuff), but it gives you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a specific patch_alc272 function that could be written to rid ourselves of these specific quirks. Are there machines with ALC272 that are functional with the current ALSA code?

[...]

Quoted 11 lines
Quoted 10 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 4 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

Quoted 6 lines

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

#13 lore raw
Quoted 101 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 92 lines · Andres Salomon
Quoted 77 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 70 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines

At Fri, 24 Apr 2009 15:24:15 -0400,

Quoted 27 lines · Andres Salomon

Hi Kailang,

I noticed that your name was on the ALC272
support patch for ALSA intel-hda. This patch
basically sets ALC272 to use (mostly) the
same code as ALC662. I have two machines
that have ALC272, and both of them need verb
tables in order to function. I'm wondering
if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch
(there are further commits I made in order to
support headphone mic stuff), but it gives
you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a
specific patch_alc272 function that could be
written to rid ourselves of these specific
quirks. Are there machines with ALC272 that
are functional with the current ALSA code?

[...]

Quoted 11 lines
Quoted 10 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 4 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

Quoted 6 lines

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are to be
listed as the first line-out pin

Can you please provide a suggestion for how this is supposed to work? Note that I only have access to this machine for another day.

#14 lore raw

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 105 lines · Andres Salomon
Quoted 101 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 98 lines · Andres Salomon
Quoted 77 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 70 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on the ALC272
support patch for ALSA intel-hda. This patch
basically sets ALC272 to use (mostly) the
same code as ALC662. I have two machines
that have ALC272, and both of them need verb
tables in order to function. I'm wondering
if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch
(there are further commits I made in order to
support headphone mic stuff), but it gives
you an idea of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a
specific patch_alc272 function that could be
written to rid ourselves of these specific
quirks. Are there machines with ALC272 that
are functional with the current ALSA code?

[...]

Quoted 11 lines
Quoted 10 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 4 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 7 lines
Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 5 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are to be
listed as the first line-out pin

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Takashi

#15 lore raw
Quoted 130 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 111 lines · Andres Salomon
Quoted 107 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 104 lines · Andres Salomon
Quoted 83 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 75 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on the ALC272
support patch for ALSA intel-hda. This
patch basically sets ALC272 to use
(mostly) the same code as ALC662. I have
two machines that have ALC272, and both
of them need verb tables in order to
function. I'm wondering if ALC662 should
really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch
(there are further commits I made in
order to support headphone mic stuff),
but it gives you an idea of the codec
values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a
specific patch_alc272 function that could
be written to rid ourselves of these
specific quirks. Are there machines with
ALC272 that are functional with the
current ALSA code?

[...]

Quoted 12 lines
Quoted 11 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853:
inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 5 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 7 lines
Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 5 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are to be
listed as the first line-out pin

Quoted 5 lines

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Specifying 0x14 as the speaker-pin doesn't work, either.

#16 lore raw

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 134 lines · Andres Salomon
Quoted 130 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 111 lines · Andres Salomon
Quoted 107 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 104 lines · Andres Salomon
Quoted 83 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 75 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on the ALC272
support patch for ALSA intel-hda. This
patch basically sets ALC272 to use
(mostly) the same code as ALC662. I have
two machines that have ALC272, and both
of them need verb tables in order to
function. I'm wondering if ALC662 should
really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the patch
(there are further commits I made in
order to support headphone mic stuff),
but it gives you an idea of the codec
values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if there's a
specific patch_alc272 function that could
be written to rid ourselves of these
specific quirks. Are there machines with
ALC272 that are functional with the
current ALSA code?

[...]

Quoted 12 lines
Quoted 11 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842:
mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853:
inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 5 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 7 lines
Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 5 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are to be
listed as the first line-out pin

Quoted 7 lines
Quoted 5 lines

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Specifying 0x14 as the speaker-pin doesn't work, either.

How did you test it?

Takashi

#17 lore raw
Quoted 145 lines · On Mon, 04 May 2009 09:02:50 +0200 Takashi Iwai <[email protected]> wrote:

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 143 lines · Andres Salomon
Quoted 138 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 113 lines · Andres Salomon
Quoted 109 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 106 lines · Andres Salomon
Quoted 85 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 77 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
Quoted 35 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on the
ALC272 support patch for ALSA
intel-hda. This patch basically sets
ALC272 to use (mostly) the same code
as ALC662. I have two machines that
have ALC272, and both of them need
verb tables in order to function.
I'm wondering if ALC662 should really
be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the
patch (there are further commits I
made in order to support headphone
mic stuff), but it gives you an idea
of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if
there's a specific patch_alc272
function that could be written to rid
ourselves of these specific quirks.
Are there machines with ALC272 that
are functional with the current ALSA
code?

[...]

Quoted 12 lines
Quoted 11 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig:
line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 5 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 7 lines
Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 5 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are
to be listed as the first line-out pin

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Quoted 6 lines
Quoted 1 line

Specifying 0x14 as the speaker-pin doesn't work, either.

How did you test it?

Takashi

I had tried manually setting the speaker and line-out pins in the autoconfig function.

#18 lore raw

At Mon, 4 May 2009 08:37:10 -0400,

Quoted 151 lines · Andres Salomon
Quoted 147 lines · On Mon, 04 May 2009 09:02:50 +0200 Takashi Iwai <[email protected]> wrote:

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 144 lines · Andres Salomon
Quoted 133 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 113 lines · Andres Salomon
Quoted 109 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 106 lines · Andres Salomon
Quoted 85 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 77 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
Quoted 35 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on the
ALC272 support patch for ALSA
intel-hda. This patch basically sets
ALC272 to use (mostly) the same code
as ALC662. I have two machines that
have ALC272, and both of them need
verb tables in order to function.
I'm wondering if ALC662 should really
be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of the
patch (there are further commits I
made in order to support headphone
mic stuff), but it gives you an idea
of the codec values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if
there's a specific patch_alc272
function that could be written to rid
ourselves of these specific quirks.
Are there machines with ALC272 that
are functional with the current ALSA
code?

[...]

Quoted 12 lines
Quoted 11 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig:
line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 5 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 6 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 7 lines
Quoted 4 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 5 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined as the
speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15 are
to be listed as the first line-out pin

Quoted 5 lines

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Specifying 0x14 as the speaker-pin doesn't work, either.

Quoted 7 lines
Quoted 4 lines

How did you test it?

Takashi

I had tried manually setting the speaker and line-out pins in the autoconfig function.

So... how?

Takashi

#19 lore raw
Quoted 165 lines · On Mon, 04 May 2009 14:40:45 +0200 Takashi Iwai <[email protected]> wrote:

At Mon, 4 May 2009 08:37:10 -0400,

Quoted 163 lines · Andres Salomon
Quoted 158 lines · On Mon, 04 May 2009 09:02:50 +0200 Takashi Iwai <[email protected]> wrote:

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 144 lines · Andres Salomon
Quoted 140 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 118 lines · Andres Salomon
Quoted 114 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 111 lines · Andres Salomon
Quoted 89 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 80 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 36 lines
Quoted 36 lines
Quoted 36 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on
the ALC272 support patch for ALSA
intel-hda. This patch basically
sets ALC272 to use (mostly) the
same code as ALC662. I have two
machines that have ALC272, and
both of them need verb tables in
order to function. I'm wondering
if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of
the patch (there are further
commits I made in order to
support headphone mic stuff), but
it gives you an idea of the codec
values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if
there's a specific patch_alc272
function that could be written to
rid ourselves of these specific
quirks. Are there machines with
ALC272 that are functional with
the current ALSA code?

[...]

Quoted 13 lines
Quoted 6 lines

Could you try sound-unstable tree a bit later again? I found a bug in my patch, and fixed and updated GIT tree now. At least, the headphone plugging should work now.

Quoted 6 lines

The mic auto-detection still doesn't work with model=auto, though. So, I'm going to take your patch anyway later. But I just wanted to be sure that the current tree could work somehow better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still
no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig:
line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 6 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 7 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 8 lines
Quoted 5 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 6 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined
as the speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15
are to be listed as the first line-out pin

Quoted 7 lines
Quoted 5 lines

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Specifying 0x14 as the speaker-pin doesn't work, either.

How did you test it?

Takashi

Quoted 7 lines
Quoted 2 lines

I had tried manually setting the speaker and line-out pins in the autoconfig function.

So... how?

Takashi

Basically, several variations of:

sound/pci/hda/hda_codec.c +5 -0
index b91f6ed..ed98262 100644
@@ -3786,6 +3786,11 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
                cfg->input_pins[AUTO_PIN_FRONT_LINE] = 0;
        }
 
+       cfg->speaker_pins[0] = 0x14;
+       cfg->speaker_outs = 1;
+       cfg->line_outs = 1;
+       cfg->line_out_pins[0] = 0x14;
+
        /*
         * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
         * as a primary output

Following by playing speaker-test and checking for speaker and/or headphone output.

#20 lore raw

At Mon, 4 May 2009 10:03:08 -0400,

Quoted 172 lines · Andres Salomon
Quoted 168 lines · On Mon, 04 May 2009 14:40:45 +0200 Takashi Iwai <[email protected]> wrote:

At Mon, 4 May 2009 08:37:10 -0400,

Quoted 165 lines · Andres Salomon
Quoted 152 lines · On Mon, 04 May 2009 09:02:50 +0200 Takashi Iwai <[email protected]> wrote:

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 150 lines · Andres Salomon
Quoted 145 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 118 lines · Andres Salomon
Quoted 114 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 111 lines · Andres Salomon
Quoted 89 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 80 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 36 lines
Quoted 36 lines

At Fri, 24 Apr 2009 15:24:15 -0400,
Andres Salomon wrote:

Hi Kailang,

I noticed that your name was on
the ALC272 support patch for ALSA
intel-hda. This patch basically
sets ALC272 to use (mostly) the
same code as ALC662. I have two
machines that have ALC272, and
both of them need verb tables in
order to function. I'm wondering
if ALC662 should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version of
the patch (there are further
commits I made in order to
support headphone mic stuff), but
it gives you an idea of the codec
values. The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder if
there's a specific patch_alc272
function that could be written to
rid ourselves of these specific
quirks. Are there machines with
ALC272 that are functional with
the current ALSA code?

[...]

Quoted 13 lines
Quoted 12 lines

Could you try sound-unstable tree a bit later
again? I found a bug in my patch, and fixed and
updated GIT tree now. At least, the headphone
plugging should work now.

The mic auto-detection still doesn't work with
model=auto, though. So, I'm going to take your
patch anyway later. But I just wanted to be
sure that the current tree could work somehow
better...

Quoted 4 lines

Hi,

I just updated and tried the current tree; still
no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig:
line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3841: hp_outs=1
(0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 6 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 7 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 8 lines
Quoted 5 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 6 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be defined
as the speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor 0x15
are to be listed as the first line-out pin

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Quoted 6 lines
Quoted 1 line

Specifying 0x14 as the speaker-pin doesn't work, either.

How did you test it?

Takashi

I had tried manually setting the speaker and line-out pins in the autoconfig function.

Quoted 7 lines
Quoted 4 lines

So... how?

Takashi

Basically, several variations of:

Well, that's basically a bad place to modify.

You can change the pin config and reconfigure the driver dynamically via sysfs interface. (Better use it on 2.6.30, though.) See Documentation/sound/alsa/HD-Audio.txt.

Takashi

Quoted 22 lines
sound/pci/hda/hda_codec.c +5 -0
index b91f6ed..ed98262 100644
@@ -3786,6 +3786,11 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
                cfg->input_pins[AUTO_PIN_FRONT_LINE] = 0;
        }
 
+       cfg->speaker_pins[0] = 0x14;
+       cfg->speaker_outs = 1;
+       cfg->line_outs = 1;
+       cfg->line_out_pins[0] = 0x14;
+
        /*
         * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
         * as a primary output

Following by playing speaker-test and checking for speaker and/or headphone output.

#21 lore raw
Quoted 187 lines · On Mon, 04 May 2009 16:18:13 +0200 Takashi Iwai <[email protected]> wrote:

At Mon, 4 May 2009 10:03:08 -0400,

Quoted 185 lines · Andres Salomon
Quoted 179 lines · On Mon, 04 May 2009 14:40:45 +0200 Takashi Iwai <[email protected]> wrote:

At Mon, 4 May 2009 08:37:10 -0400,

Quoted 165 lines · Andres Salomon
Quoted 161 lines · On Mon, 04 May 2009 09:02:50 +0200 Takashi Iwai <[email protected]> wrote:

At Thu, 30 Apr 2009 09:51:27 -0400,

Quoted 158 lines · Andres Salomon
Quoted 147 lines · On Thu, 30 Apr 2009 07:34:02 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 13:01:42 -0400,

Quoted 125 lines · Andres Salomon
Quoted 121 lines · On Wed, 29 Apr 2009 15:09:20 +0200 Takashi Iwai <[email protected]> wrote:

At Wed, 29 Apr 2009 09:02:41 -0400,

Quoted 118 lines · Andres Salomon
Quoted 96 lines · On Wed, 29 Apr 2009 08:33:28 +0200 Takashi Iwai <[email protected]> wrote:

At Tue, 28 Apr 2009 18:21:55 -0400,

Quoted 87 lines · Andres Salomon
Quoted 3 lines · On Tue, 28 Apr 2009 15:41:08 -0400 Andres Salomon <[email protected]> wrote:

On Mon, 27 Apr 2009 18:08:21 +0200
Takashi Iwai <[email protected]> wrote:

[...]

Quoted 41 lines

At Fri, 24 Apr 2009 15:24:15
-0400, Andres Salomon wrote:

Hi Kailang,

I noticed that your name was
on the ALC272 support patch
for ALSA intel-hda. This
patch basically sets ALC272
to use (mostly) the same code
as ALC662. I have two
machines that have ALC272,
and both of them need verb
tables in order to function.
I'm wondering if ALC662
should really be used..

Here's one -

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=7662834bb9a78d244c6d7ee43358c14c94d249c9

This isn't the final version
of the patch (there are
further commits I made in
order to support headphone
mic stuff), but it gives you
an idea of the codec values.
The other is:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-hardy-lum.git;a=commitdiff;h=72ff85641a30dc7ac502e2ea01bf14a04efb4cf1

All of these leave me wonder
if there's a specific
patch_alc272 function that
could be written to rid
ourselves of these specific
quirks. Are there machines
with ALC272 that are
functional with the current
ALSA code?

[...]

Quoted 17 lines

Could you try sound-unstable tree a bit
later again? I found a bug in my patch, and
fixed and updated GIT tree now. At least,
the headphone plugging should work now.

The mic auto-detection still doesn't work
with model=auto, though. So, I'm going to
take your patch anyway later. But I just
wanted to be sure that the current tree
could work somehow better...

Hi,

I just updated and tried the current tree;
still no sound/headphone output. :(

Ok, I believe I've made some progress on this. The problem appears to be related to the autoconfig handling of the line out nids. The current code ends up with something like the following:

ALSA sound/pci/hda/hda_codec.c:3833: autoconfig:
line_outs=1 (0x17/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3837:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3841:
hp_outs=1 (0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3842: mono:
mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3853: inputs:
mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

Quoted 6 lines

However, NID 0x17 is actually a speaker_out. The code that checks for line_outs in snd_hda_parse_pin_def_config() unsets the speaker_out and uses that NID for a line_out. For whatever reason, this breaks things (no sound output, no headphone out).

Quoted 7 lines

That's intentional, and the driver checks that case, too. Please check the latest sound git tree and see the kernel message. You should have messages like "realtek: ..."

Takashi

The realtek: lines don't appear to affect NID 0x17 at all. Instead, they say:

ALSA sound/pci/hda/patch_realtek.c:1154: realtek: No valid SSID, checking pincfg 0x40178e2d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1170: realtek:
Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0272 ALSA sound/pci/hda/patch_realtek.c:1111: realtek: Enable HP auto-muting on NID 0x21

Quoted 8 lines
Quoted 5 lines

Then 0x17 should be toggled when the jack on 0x21 is detected.

Takashi

But since I get absolutely no sound through headphones or speakers, I can't tell if it's being toggled. :)

You can see the 0x17 in the codec proc whether it's changed at plugged / unplugged. The driver should change its pin control dynamically.

Quoted 6 lines

I've noticed:
- in order to get speaker output, 0x17 *must* be
defined as the speaker-out, and 0x14 *must* be listed as a line-out pin.
- in order to get headphone output, neither 0x17 nor
0x15 are to be listed as the first line-out pin

Quoted 5 lines

Then it implies that 0x17 has nothing to do with the speaker, i.e. a BIOS bug. 0x14 could be the speaker output while 0x17 is just a dummy.

Specifying 0x14 as the speaker-pin doesn't work, either.

Quoted 7 lines
Quoted 4 lines

How did you test it?

Takashi

I had tried manually setting the speaker and line-out pins in the autoconfig function.

So... how?

Takashi

Quoted 9 lines
Quoted 1 line

Basically, several variations of:

Well, that's basically a bad place to modify.

You can change the pin config and reconfigure the driver dynamically via sysfs interface. (Better use it on 2.6.30, though.) See Documentation/sound/alsa/HD-Audio.txt.

Unfortunately, I can no longer test it, as I don't have access to the hardware anymore.