Skip to contentSkip to conversation

Asus A6RP and ALC861 headphones problem solved

PATCH In review [email protected] 3 participants 10 messages Oct 8, 2006 – Oct 23, 2006 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Asus A6RP and ALC861 headphones problem solved

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long, so I decided to make a new one with result of my work - patched patch_realtek.c file.

The patch I posted least time was good. The only thing that had to be changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to work.

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers, line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that correct?

Because each time I make a patch file it doesn't want to work (I make it with this command: diff -Nuar old.file new.file), I'm sending in attachment compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with asus-a6rp model, please ignore changes made in parts of code connected with other models.

And one more thing...
Defaultly there are some noises in the background, here is the way to disable them (instructions for Gnome):

Go to gnome-volume-manager (doubleclick on speaker icon on gnome-panel), go to preferences menu and mark out all positions (make all mixers available), go to tab with mic and line-in mixers and:
below line-in and cd-in mixers cross-out speaker and mic icons,
below mic mixer cross-out speaker icon and leave not-crossed-out mic icon,
below 4th mixer leave icons not-crossed-out.
The noise should now disappear and microphones should work :)

Is there any way to disable these noises by default?

Hope this will be useful for someone :)
Mariusz Domanski

P.S.
If you verify this patch with positive result, please change status of my bug-report to solved: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2320

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#1 lore raw

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 5 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

Quoted 8 lines

My last thread (started on 23 Sep 20:08) about my problem is quite long, so I decided to make a new one with result of my work - patched patch_realtek.c file.

The patch I posted least time was good. The only thing that had to be changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to work.

This implies that the headphone jack is connected to another DAC, most likely the side one (0x04). The right fix would to add .hp_nid = 0x04 in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

Quoted 6 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers, line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that correct?

Quoted 6 lines

Because each time I make a patch file it doesn't want to work (I make it with this command: diff -Nuar old.file new.file), I'm sending in attachment compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with asus-a6rp model, please ignore changes made in parts of code connected with other models.

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by

	diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
		new-alsa-kernel/pci/hda/patch_realtek.c

Takashi

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#2 lore raw

----- Original Message ----- From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 19 lines

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 11 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long, so
I decided to make a new one with result of my work - patched patch_realtek.c
file.

Quoted 5 lines

The patch I posted least time was good. The only thing that had to be changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to work.

Quoted 3 lines

This implies that the headphone jack is connected to another DAC, most likely the side one (0x04). The right fix would to add .hp_nid = 0x04 in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier that in my case hp jack is surr-out (0x09))

Quoted 5 lines
Quoted 5 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers, line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that correct?

Even with fix described above this is still a problem - when channel mode is set to 6ch the sound in hp jack is not present (the surround output goes to line-in jack, there is also clfe output in mic jack and no output is in hp jack).

Quoted 9 lines
Quoted 8 lines

Because each time I make a patch file it doesn't want to work (I make it with this command: diff -Nuar old.file new.file), I'm sending in attachment
compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with asus-a6rp model, please ignore changes made in parts of code connected with
other models.

Quoted 7 lines

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
new-alsa-kernel/pci/hda/patch_realtek.c

Ok, patch is in the attachment :)

Quoted 1 line

Takashi

Mariusz

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#3 lore raw

At Wed, 11 Oct 2006 18:36:02 +0200,

Quoted 41 lines · <[email protected]> wrote:

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 19 lines

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 11 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long, so
I decided to make a new one with result of my work - patched patch_realtek.c
file.

Quoted 5 lines

The patch I posted least time was good. The only thing that had to be changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to work.

Quoted 3 lines

This implies that the headphone jack is connected to another DAC, most likely the side one (0x04). The right fix would to add .hp_nid = 0x04 in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier that in my case hp jack is surr-out (0x09))

Quoted 5 lines
Quoted 5 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers, line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that correct?

Quoted 4 lines

Even with fix described above this is still a problem - when channel mode is set to 6ch the sound in hp jack is not present (the surround output goes to line-in jack, there is also clfe output in mic jack and no output is in hp jack).

The stream is set up to hp_nid (0x06) too, regardless of the channel mode. You can confirm this by compiling with --with-debug=detect option that will show more debug messages. So, it shouldn't be the problem of hp_nid but others.

If the no sound comes out, it means either pin is reset to input, or a volume is muted in the route to DAC 0x06 -> hp-jack. Check /proc/asound/card0/codec#* after ch6 mode. You can comapre the status with ch6 mode, too, by simply diffing codec#* dumps in the different states.

Quoted 12 lines
Quoted 12 lines
Quoted 8 lines

Because each time I make a patch file it doesn't want to work (I make it with this command: diff -Nuar old.file new.file), I'm sending in attachment
compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with asus-a6rp model, please ignore changes made in parts of code connected with
other models.

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

Quoted 6 lines
Quoted 4 lines

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
new-alsa-kernel/pci/hda/patch_realtek.c

Ok, patch is in the attachment :)

Thanks, but an uncompressed file would be more appreciated :)

Takashi

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

#4 lore raw

At Wed, 11 Oct 2006 18:45:52 +0200,

Quoted 54 lines · I wrote:

At Wed, 11 Oct 2006 18:36:02 +0200,

Quoted 41 lines · <[email protected]> wrote:

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 19 lines

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 11 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long, so
I decided to make a new one with result of my work - patched patch_realtek.c
file.

Quoted 5 lines

The patch I posted least time was good. The only thing that had to be changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to work.

Quoted 3 lines

This implies that the headphone jack is connected to another DAC, most likely the side one (0x04). The right fix would to add .hp_nid = 0x04 in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier that in my case hp jack is surr-out (0x09))

Quoted 5 lines
Quoted 5 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers, line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that correct?

Quoted 4 lines

Even with fix described above this is still a problem - when channel mode is set to 6ch the sound in hp jack is not present (the surround output goes to line-in jack, there is also clfe output in mic jack and no output is in hp jack).

The stream is set up to hp_nid (0x06) too, regardless of the channel mode. You can confirm this by compiling with --with-debug=detect option that will show more debug messages. So, it shouldn't be the problem of hp_nid but others.

Quoted 5 lines

If the no sound comes out, it means either pin is reset to input, or a volume is muted in the route to DAC 0x06 -> hp-jack. Check /proc/asound/card0/codec#* after ch6 mode. You can comapre the status with ch6 mode, too, by simply diffing codec#* dumps in the different states.

I still wonder whether the HP output works on 6-channel mode if you remove .need_dac_fix = 1 in the preset...

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 9 lines

Because each time I make a patch file it doesn't want to work (I make it with this command: diff -Nuar old.file new.file), I'm sending in attachment
compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with asus-a6rp model, please ignore changes made in parts of code connected with
other models.

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
new-alsa-kernel/pci/hda/patch_realtek.c

Ok, patch is in the attachment :)

Thanks, but an uncompressed file would be more appreciated :)

I checked the patch now and it looks good.

Could you give a proper summary, changelog and signed-off-by line for committing to the upstream? The remaining small issues can be fixed later, too.

Thanks,

Takashi

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

#5 lore raw

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, October 17, 2006 8:56 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 68 lines

At Wed, 11 Oct 2006 18:45:52 +0200,

Quoted 66 lines · I wrote:

At Wed, 11 Oct 2006 18:36:02 +0200,

Quoted 50 lines · <[email protected]> wrote:

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem
solved

Quoted 22 lines

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 12 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long,
so
I decided to make a new one with result of my work - patched patch_realtek.c
file.

Quoted 7 lines

The patch I posted least time was good. The only thing that had to be
changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to
work.

Quoted 5 lines

This implies that the headphone jack is connected to another DAC, most
likely the side one (0x04). The right fix would to add .hp_nid = 0x04
in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier
that in my case hp jack is surr-out (0x09))

Quoted 7 lines
Quoted 7 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers,
line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that
correct?

Quoted 7 lines

Even with fix described above this is still a problem - when channel mode is
set to 6ch the sound in hp jack is not present (the surround output goes to
line-in jack, there is also clfe output in mic jack and no output is in hp
jack).

The stream is set up to hp_nid (0x06) too, regardless of the channel mode. You can confirm this by compiling with --with-debug=detect option that will show more debug messages. So, it shouldn't be the problem of hp_nid but others.

Quoted 8 lines
Quoted 5 lines

If the no sound comes out, it means either pin is reset to input, or a volume is muted in the route to DAC 0x06 -> hp-jack. Check /proc/asound/card0/codec#* after ch6 mode. You can comapre the status with ch6 mode, too, by simply diffing codec#* dumps in the different states.

I still wonder whether the HP output works on 6-channel mode if you remove .need_dac_fix = 1 in the preset...

As far as I remember it didn't work...

Quoted 22 lines
Quoted 22 lines
Quoted 21 lines
Quoted 12 lines
Quoted 11 lines

Because each time I make a patch file it doesn't want to work (I make it
with this command: diff -Nuar old.file new.file), I'm sending in attachment
compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with
asus-a6rp model, please ignore changes made in parts of code connected
with
other models.

Quoted 7 lines

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
new-alsa-kernel/pci/hda/patch_realtek.c

Ok, patch is in the attachment :)

Quoted 7 lines
Quoted 1 line

Thanks, but an uncompressed file would be more appreciated :)

I checked the patch now and it looks good.

Could you give a proper summary, changelog and signed-off-by line for committing to the upstream? The remaining small issues can be fixed later, too.

Sorry but I don't understand, what changelog? Everything I have changed is in patch file.
The problem was with 3 things:
1) the hp jack is 0x09 not 0x0f (0x0f has to be set to vref)
2) hp_nid was wrong, it has to be set to 0x06
3) in 6ch mode surround output (hp jack output) 'jumps' to line-in jack, leaving no output in hp jack
What else should I write?

Quoted 4 lines

Thanks,

Takashi

Thanks,
Mariusz

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

#6 lore raw

What Takashi needs is a summary and description for the repository. Here's an example from one of my patches:

Summery: hda-codec - Add toshiba model to ALC861 codec

This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree.

Also, I made a minor revision to your patch, changing it from asus_a6rp to just asus. I have been working on a similar patch for another Asus Laptop (F3J), and if this works for them, great (otherwise I'm back to square one). Still, better to be more generic than model specific. Leave the model specific details for the config table array. Attached are my changes.

Tobin

Quoted 145 lines · On Fri, 2006-10-20 at 00:10 +0200, [email protected] wrote:

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, October 17, 2006 8:56 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 68 lines

At Wed, 11 Oct 2006 18:45:52 +0200,

Quoted 66 lines · I wrote:

At Wed, 11 Oct 2006 18:36:02 +0200,

Quoted 50 lines · <[email protected]> wrote:

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem
solved

Quoted 22 lines

At Sun, 8 Oct 2006 22:10:02 +0200,

Quoted 12 lines · <[email protected]> wrote:

Hi!

I finally made it, now can use headphones with my laptop :)

My last thread (started on 23 Sep 20:08) about my problem is quite long,
so
I decided to make a new one with result of my work - patched patch_realtek.c
file.

Quoted 7 lines

The patch I posted least time was good. The only thing that had to be
changed is to remove this line:
.need_dac_fix = 1,
from alc861_presets. With this line of code the patch doesn't want to
work.

Quoted 5 lines

This implies that the headphone jack is connected to another DAC, most
likely the side one (0x04). The right fix would to add .hp_nid = 0x04
in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.

.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier
that in my case hp jack is surr-out (0x09))

Quoted 7 lines
Quoted 7 lines

There is only one thing that I'm not sure...
When channel mode is changed to 6ch the sound is in built-in speakers,
line-in jack and mic jack, but not in hp jack (of course when i plug something to hp jack the sound in built-in speakers disappears). Is that
correct?

Quoted 7 lines

Even with fix described above this is still a problem - when channel mode is
set to 6ch the sound in hp jack is not present (the surround output goes to
line-in jack, there is also clfe output in mic jack and no output is in hp
jack).

The stream is set up to hp_nid (0x06) too, regardless of the channel mode. You can confirm this by compiling with --with-debug=detect option that will show more debug messages. So, it shouldn't be the problem of hp_nid but others.

Quoted 8 lines
Quoted 5 lines

If the no sound comes out, it means either pin is reset to input, or a volume is muted in the route to DAC 0x06 -> hp-jack. Check /proc/asound/card0/codec#* after ch6 mode. You can comapre the status with ch6 mode, too, by simply diffing codec#* dumps in the different states.

I still wonder whether the HP output works on 6-channel mode if you remove .need_dac_fix = 1 in the preset...

As far as I remember it didn't work...

Quoted 22 lines
Quoted 22 lines
Quoted 21 lines
Quoted 12 lines
Quoted 11 lines

Because each time I make a patch file it doesn't want to work (I make it
with this command: diff -Nuar old.file new.file), I'm sending in attachment
compressed patch_realtek.c file (I patched final version 1.0.13 of patch_realtek.c). The only important changes are those connected with
asus-a6rp model, please ignore changes made in parts of code connected
with
other models.

Quoted 7 lines

Oh no, please send a patch instead. Otherwise we cannot review and check your changes.

What do you mean "it doesn't want to work"? If you changed a single file, you can just create a diff for that file, simply by diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
new-alsa-kernel/pci/hda/patch_realtek.c

Ok, patch is in the attachment :)

Quoted 7 lines
Quoted 1 line

Thanks, but an uncompressed file would be more appreciated :)

I checked the patch now and it looks good.

Could you give a proper summary, changelog and signed-off-by line for committing to the upstream? The remaining small issues can be fixed later, too.

Sorry but I don't understand, what changelog? Everything I have changed is in patch file.
The problem was with 3 things:
1) the hp jack is 0x09 not 0x0f (0x0f has to be set to vref)
2) hp_nid was wrong, it has to be set to 0x06
3) in 6ch mode surround output (hp jack output) 'jumps' to line-in jack, leaving no output in hp jack
What else should I write?

Quoted 4 lines

Thanks,

Takashi

Thanks,
Mariusz

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Signature · 1 line
Tobin Davis <[email protected]>
pci/hda/patch_realtek.c +160 -2
diff -r d7fe584f7395 pci/hda/patch_realtek.c
@@ -100,6 +100,7 @@ enum {
 	ALC861_6ST_DIG,
 	ALC861_UNIWILL_M31,
 	ALC861_TOSHIBA,
+	ALC861_ASUS.
 	ALC861_AUTO,
 	ALC861_MODEL_LAST,
 };
@@ -6650,6 +6651,44 @@ static struct hda_channel_mode alc861_un
 	{ 4, alc861_uniwill_m31_ch4_init },
 };
 
+/* Set mic1 and line-in as input and unmute the mixer */
+static struct hda_verb alc861_asus_ch2_init[] = {
+	/* set pin widget 1Ah (line in) for input */
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
+	{ } /* end */
+};
+/* Set mic1 nad line-in as output and mute mixer */
+static struct hda_verb alc861_asus_ch6_init[] = {
+	/* set pin widget 1Ah (line in) for output (Back Surround)*/
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+	/* set pin widget 18h (mic1) for output (CLFE)*/
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+	{ 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc861_asus_modes[2] = {
+	{ 2, alc861_asus_ch2_init },
+	{ 6, alc861_asus_ch6_init },
+};
+
 /* patch-ALC861 */
 
 static struct snd_kcontrol_new alc861_base_mixer[] = {
@@ -6789,6 +6828,48 @@ static struct snd_kcontrol_new alc861_un
                 .private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
 	},
 	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc861_asus_mixer[] = {
+        /* output mixer control */
+	HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+	/* Input mixer control */
+	HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
+ 
+	/* Capture mixer control */
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Capture Source",
+		.count = 1,
+		.info = alc_mux_enum_info,
+		.get = alc_mux_enum_get,
+		.put = alc_mux_enum_put,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Channel Mode",
+		.info = alc_ch_mode_info,
+		.get = alc_ch_mode_get,
+		.put = alc_ch_mode_put,
+                .private_value = ARRAY_SIZE(alc861_asus_modes),
+	},
+	{ }
 };			
 	
 /*
@@ -6979,6 +7060,67 @@ static struct hda_verb alc861_uniwill_m3
 	{ }
 };
 
+static struct hda_verb alc861_asus_init_verbs[] = {
+	/*
+	 * Unmute ADC0 and set the default input to mic-in
+	 */
+	/* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+	{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
+	/* route front PCM to HP */
+	{ 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	/* port-B for mic-in (rear panel) with vref */
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+	/* port-C for line-in (rear panel) */
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* port-D for Front */
+	{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+	/* port-E for HP out (front panel) */
+	{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+	/* route front PCM to HP */
+	{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	/* port-F for mic-in (front panel) with vref */
+	{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+	/* port-G for CLFE (rear panel) */
+	{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* port-H for side (rear panel) */
+	{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* CD-in */
+	{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* route front mic to ADC1*/
+	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* Unmute DAC0~3 & spdif out*/
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Mixer 14 (mic) 1c (Line in)*/
+	{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	
+	/* Unmute Stereo Mixer 15 */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c          }, /* Output 0~12 step */
+
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+	{ }
+};
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -7350,10 +7492,12 @@ static struct hda_board_config alc861_cf
 	{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
 	  .config = ALC861_UNIWILL_M31 },
 	{ .modelname = "toshiba", .config = ALC861_TOSHIBA },
-	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
-	  .config = ALC861_TOSHIBA },
 	{ .pci_subvendor = 0x1179, .pci_subdevice = 0xff10,
 	  .config = ALC861_TOSHIBA },
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
+	  .config = ALC861_ASUS },
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1393,
+	  .config = ALC861_ASUS },
 	{ .modelname = "auto", .config = ALC861_AUTO },
 	{}
 };
@@ -7434,6 +7578,20 @@ static struct alc_config_preset alc861_p
 		.unsol_event = alc861_toshiba_unsol_event,
 		.init_hook = alc861_toshiba_automute,
 	},
+	[ALC861_ASUS] = {
+ 		.mixers = { alc861_asus_mixer },
+ 		.init_verbs = { alc861_asus_init_verbs },
+ 		.num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ 		.dac_nids = alc861_dac_nids,
+ 		.dig_out_nid = ALC861_DIGOUT_NID,
+ 		.num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
+ 		.channel_mode = alc861_asus_modes,
+ 		.need_dac_fix = 1,
+ 		.hp_nid = 0x06,
+ 		.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ 		.adc_nids = alc861_adc_nids,
+ 		.input_mux = &alc861_capture_source,
+ 	},
 };	
 
 

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#7 lore raw

At Thu, 19 Oct 2006 16:39:10 -0700,

Quoted 10 lines · Tobin Davis

What Takashi needs is a summary and description for the repository. Here's an example from one of my patches:

Summery: hda-codec - Add toshiba model to ALC861 codec

This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree.

Yep, exactly.

Quoted 6 lines

Also, I made a minor revision to your patch, changing it from asus_a6rp to just asus. I have been working on a similar patch for another Asus Laptop (F3J), and if this works for them, great (otherwise I'm back to square one). Still, better to be more generic than model specific. Leave the model specific details for the config table array. Attached are my changes.

Don't forget to add an entry with modelname="asus", and change ALSA-Configuration.txt appropriately, too.

Thanks,

Takashi

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

#8 lore raw

----- Original Message ----- From: "Takashi Iwai" <[email protected]>
To: "Tobin Davis" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Friday, October 20, 2006 3:33 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 22 lines

At Thu, 19 Oct 2006 16:39:10 -0700,

Quoted 10 lines · Tobin Davis

What Takashi needs is a summary and description for the repository. Here's an example from one of my patches:

Summery: hda-codec - Add toshiba model to ALC861 codec

This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree.

Yep, exactly.

Quoted 6 lines

Also, I made a minor revision to your patch, changing it from asus_a6rp to just asus. I have been working on a similar patch for another Asus Laptop (F3J), and if this works for them, great (otherwise I'm back to square one). Still, better to be more generic than model specific. Leave the model specific details for the config table array. Attached are my changes.

Quoted 7 lines

Don't forget to add an entry with modelname="asus", and change ALSA-Configuration.txt appropriately, too.

Thanks,

Takashi

Ok, so here it is :)

Summary: hda-codec - Add asus model to ALC861 codec

This patch adds support for Asus laptops (for example: Asus
A6Rp-AP002).

I modified patch_realtek.c from the newest hg tree and made asus.patch basing on it (also included change made by Tobin - pci_subdevice for another asus laptop). I also modified the newest ALSA-Configuration.txt and made patch.
Patches are in the attachment.

Thanks,
Mariusz

pci/hda/patch_realtek.c renamed from patch_realtek.c +163 -2
@@ -100,6 +100,7 @@
 	ALC861_6ST_DIG,
 	ALC861_UNIWILL_M31,
 	ALC861_TOSHIBA,
+	ALC861_ASUS,
 	ALC861_AUTO,
 	ALC861_MODEL_LAST,
 };
@@ -6650,6 +6651,44 @@
 	{ 4, alc861_uniwill_m31_ch4_init },
 };
 
+/* Set mic1 and line-in as input and unmute the mixer */
+static struct hda_verb alc861_asus_ch2_init[] = {
+	/* set pin widget 1Ah (line in) for input */
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
+	{ } /* end */
+};
+/* Set mic1 nad line-in as output and mute mixer */
+static struct hda_verb alc861_asus_ch6_init[] = {
+	/* set pin widget 1Ah (line in) for output (Back Surround)*/
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+	/* set pin widget 18h (mic1) for output (CLFE)*/
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+	{ 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+	{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc861_asus_modes[2] = {
+	{ 2, alc861_asus_ch2_init },
+	{ 6, alc861_asus_ch6_init },
+};
+
 /* patch-ALC861 */
 
 static struct snd_kcontrol_new alc861_base_mixer[] = {
@@ -6790,6 +6829,49 @@
 	},
 	{ } /* end */
 };			
+
+static struct snd_kcontrol_new alc861_asus_mixer[] = {
+        /* output mixer control */
+	HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+	/* Input mixer control */
+	HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
+ 
+	/* Capture mixer control */
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Capture Source",
+		.count = 1,
+		.info = alc_mux_enum_info,
+		.get = alc_mux_enum_get,
+		.put = alc_mux_enum_put,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Channel Mode",
+		.info = alc_ch_mode_info,
+		.get = alc_ch_mode_get,
+		.put = alc_ch_mode_put,
+                .private_value = ARRAY_SIZE(alc861_asus_modes),
+	},
+	{ }
+};			
+
 	
 /*
  * generic initialization of ADC, input mixers and output mixers
@@ -6979,6 +7061,68 @@
 	{ }
 };
 
+static struct hda_verb alc861_asus_init_verbs[] = {
+	/*
+	 * Unmute ADC0 and set the default input to mic-in
+	 */
+	/* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+	{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
+	/* route front PCM to HP */
+	{ 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	/* port-B for mic-in (rear panel) with vref */
+	{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+	/* port-C for line-in (rear panel) */
+	{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* port-D for Front */
+	{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+	/* port-E for HP out (front panel) */
+	{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+	/* route front PCM to HP */
+	{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	/* port-F for mic-in (front panel) with vref */
+	{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+	/* port-G for CLFE (rear panel) */
+	{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* port-H for side (rear panel) */
+	{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+	/* CD-in */
+	{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+	/* route front mic to ADC1*/
+	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* Unmute DAC0~3 & spdif out*/
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Mixer 14 (mic) 1c (Line in)*/
+	{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	
+	/* Unmute Stereo Mixer 15 */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c          }, /* Output 0~12 step */
+
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+	{ }
+};
+
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -7350,10 +7494,13 @@
 	{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
 	  .config = ALC861_UNIWILL_M31 },
 	{ .modelname = "toshiba", .config = ALC861_TOSHIBA },
-	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
-	  .config = ALC861_TOSHIBA },
 	{ .pci_subvendor = 0x1179, .pci_subdevice = 0xff10,
 	  .config = ALC861_TOSHIBA },
+	{ .modelname = "asus", .config = ALC861_ASUS},
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1393,
+	  .config = ALC861_ASUS },
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
+	  .config = ALC861_ASUS },
 	{ .modelname = "auto", .config = ALC861_AUTO },
 	{}
 };
@@ -7434,6 +7581,20 @@
 		.unsol_event = alc861_toshiba_unsol_event,
 		.init_hook = alc861_toshiba_automute,
 	},
+	[ALC861_ASUS] = {
+		.mixers = { alc861_asus_mixer },
+		.init_verbs = { alc861_asus_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc861_dac_nids),
+		.dac_nids = alc861_dac_nids,
+		.dig_out_nid = ALC861_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
+		.channel_mode = alc861_asus_modes,
+		.need_dac_fix = 1,
+		.hp_nid = 0x06,
+		.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+		.adc_nids = alc861_adc_nids,
+		.input_mux = &alc861_capture_source,
+	},
 };	
 
 
Documentation/ALSA-Configuration.txt renamed from ALSA-Configuration.txt +1 -0
@@ -836,6 +836,7 @@
 	  3stack-660	3-jack (for ALC660)
 	  uniwill-m31	Uniwill M31 laptop
 	  toshiba	Toshiba laptop support
+	  asus		Asus laptop support
 	  auto		auto-config reading BIOS (default)
 
 	CMI9880

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#9 lore raw

At Fri, 20 Oct 2006 22:21:21 +0200,

Quoted 48 lines · <[email protected]> wrote:

[1 <text/plain; ISO-8859-1 (7bit)>]
----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: "Tobin Davis" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Friday, October 20, 2006 3:33 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem solved

Quoted 22 lines

At Thu, 19 Oct 2006 16:39:10 -0700,

Quoted 10 lines · Tobin Davis

What Takashi needs is a summary and description for the repository. Here's an example from one of my patches:

Summery: hda-codec - Add toshiba model to ALC861 codec

This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree.

Yep, exactly.

Quoted 6 lines

Also, I made a minor revision to your patch, changing it from asus_a6rp to just asus. I have been working on a similar patch for another Asus Laptop (F3J), and if this works for them, great (otherwise I'm back to square one). Still, better to be more generic than model specific. Leave the model specific details for the config table array. Attached are my changes.

Quoted 7 lines

Don't forget to add an entry with modelname="asus", and change ALSA-Configuration.txt appropriately, too.

Thanks,

Takashi

Ok, so here it is :)

Summary: hda-codec - Add asus model to ALC861 codec

This patch adds support for Asus laptops (for example: Asus
A6Rp-AP002).

Quoted 7 lines

I modified patch_realtek.c from the newest hg tree and made asus.patch basing on it (also included change made by Tobin - pci_subdevice for another asus laptop).
I also modified the newest ALSA-Configuration.txt and made patch. Patches are in the attachment.

Thanks.
Applied to ALSA HG tree now.

Takashi

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642