2.6.17rc emu10k1 regression.
$ lspci | grep audio 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 06:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
(That's 06:0d.1 0980: 1102:7002 (rev 01))
This worked fine in 2.6.16, however when I try a .17rc kernel I get this..
cannot find the slot for index 0 (range 0-1)EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12
(Unremarkable, considering it *isn't* an Audigy)
modprobe.conf has ..
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1
What changed ?
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 4 lines · Dave Jones
$ lspci | grep audio 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 06:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
Quoted 10 lines
(That's 06:0d.1 0980: 1102:7002 (rev 01))
This worked fine in 2.6.16, however when I try a .17rc kernel I get this..
cannot find the slot for index 0 (range 0-1)
EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12(Unremarkable, considering it *isn't* an Audigy)
The same driver is used for the EMU10K1 and the Prodigy.
the -12 is an "Out of memory", so something outside the alas driver tree must have changed to cause this problem.
James
Quoted 1 line · James Courtier-Dutton
The same driver is used for the EMU10K1 and the Prodigy.
Dam spell checker
s/Prodigy/Audigy/g
Quoted 7 lines · James Courtier-Dutton
Quoted 4 lines
cannot find the slot for index 0 (range 0-1)
EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12(Unremarkable, considering it *isn't* an Audigy)
The same driver is used for the EMU10K1 and the Prodigy.
the -12 is an "Out of memory", so something outside the alas driver tree must have changed to cause this problem.
I rebooted into exactly the same kernel, and everything magically started working again. Puzzling. There were no other signs of memory exhaustion.
Hmm. Will keep an eye on things to see if it happens again.
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 7 lines · James Courtier-Dutton
Quoted 4 lines
cannot find the slot for index 0 (range 0-1)
EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12(Unremarkable, considering it *isn't* an Audigy)
The same driver is used for the EMU10K1 and the Prodigy.
the -12 is an "Out of memory", so something outside the alas driver tree must have changed to cause this problem.
I rebooted into exactly the same kernel, and everything magically started working again. Puzzling. There were no other signs of memory exhaustion.
Hmm. Will keep an eye on things to see if it happens again.
Dave
Signature · 1 line
http://www.codemonkey.org.uk
At Sun, 28 May 2006 12:40:15 -0400,
Quoted 16 lines · Dave Jones
$ lspci | grep audio 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 06:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)(That's 06:0d.1 0980: 1102:7002 (rev 01))
This worked fine in 2.6.16, however when I try a .17rc kernel I get this..
cannot find the slot for index 0 (range 0-1)
EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12(Unremarkable, considering it *isn't* an Audigy)
Quoted 7 lines
modprobe.conf has ..
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 {/usr/sbin/alsactlstore 0 >/dev/null 2>&1 || : ; };/sbin/modprobe-r --ignore-remove snd-emu10k1What changed ?
Nothing from ALSA side. Maybe the module loading mechanism (or slot order) was changed on your system.
The scenario is:
intel8x0 driver is first loaded on the first empty slot (index=0) before snd-emu10k1. Since you set index=0 module option for snd-emu10k1, it tried to load on the same slot but failed.
A workaround is to set index=1 option for snd-intel8x0 in addition, for using emu10k1 as the primary card.
Takashi
At Sun, 28 May 2006 12:40:15 -0400,
Quoted 16 lines · Dave Jones
$ lspci | grep audio 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 06:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)(That's 06:0d.1 0980: 1102:7002 (rev 01))
This worked fine in 2.6.16, however when I try a .17rc kernel I get this..
cannot find the slot for index 0 (range 0-1)
EMU10K1_Audigy: probe of 0000:06:0d.0 failed with error -12(Unremarkable, considering it *isn't* an Audigy)
Quoted 7 lines
modprobe.conf has ..
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 {/usr/sbin/alsactlstore 0 >/dev/null 2>&1 || : ; };/sbin/modprobe-r --ignore-remove snd-emu10k1What changed ?
Nothing from ALSA side. Maybe the module loading mechanism (or slot order) was changed on your system.
The scenario is:
intel8x0 driver is first loaded on the first empty slot (index=0) before snd-emu10k1. Since you set index=0 module option for snd-emu10k1, it tried to load on the same slot but failed.
A workaround is to set index=1 option for snd-intel8x0 in addition, for using emu10k1 as the primary card.
Takashi
Quoted 11 lines · Takashi Iwai
Quoted 7 lines
modprobe.conf has ..
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 {/usr/sbin/alsactlstore 0 >/dev/null 2>&1 || : ; };/sbin/modprobe-r --ignore-remove snd-emu10k1What changed ?
Nothing from ALSA side. Maybe the module loading mechanism (or slot order) was changed on your system.
Quoted 8 lines
The scenario is:
intel8x0 driver is first loaded on the first empty slot (index=0) before snd-emu10k1. Since you set index=0 module option for snd-emu10k1, it tried to load on the same slot but failed.
A workaround is to set index=1 option for snd-intel8x0 in addition, for using emu10k1 as the primary card.
The modprobe.conf also had an index=1 entry already for the intel driver.
Dave
Signature · 1 line
http://www.codemonkey.org.uk
At Mon, 29 May 2006 10:50:31 -0400,
Quoted 16 lines · Dave Jones
Quoted 13 lines · Takashi Iwai
Quoted 7 lines
modprobe.conf has ..
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 {/usr/sbin/alsactlstore 0 >/dev/null 2>&1 || : ; };/sbin/modprobe-r --ignore-remove snd-emu10k1What changed ?
Nothing from ALSA side. Maybe the module loading mechanism (or slot order) was changed on your system.
The scenario is:
Quoted 8 lines
Quoted 6 lines
intel8x0 driver is first loaded on the first empty slot (index=0) before snd-emu10k1. Since you set index=0 module option for snd-emu10k1, it tried to load on the same slot but failed.
A workaround is to set index=1 option for snd-intel8x0 in addition, for using emu10k1 as the primary card.
The modprobe.conf also had an index=1 entry already for the intel driver.
Hmm, then something like a webcam with an audio device?
Takashi