Skip to contentSkip to conversation

idt STAC927x adat supported (sigmatel HDA codec) ?

DISCUSSION Eric 4 participants 14 messages Jan 11, 2009 – Mar 3, 2011

lore
Share & tools
lore

Eric

author
#0 lore raw

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec supported in alsa ?
If not could someone please try to add this incredibly nice feature in the existing alsa driver ?

Thank you very much

#1 lore raw

At Sun, 11 Jan 2009 15:01:04 +0100,

Quoted 5 lines · Eric

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec supported in alsa ?
If not could someone please try to add this incredibly nice feature in the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x...

Takashi

author
#2 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

In their handbook, motherboard intel DP35DP and others with STAC927x (in the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output working under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the sigmatel STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and I am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 9 lines
Quoted 4 lines

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec supported in alsa ?
If not could someone please try to add this incredibly nice feature in the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

#3 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

Hello Eric,

You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

...
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
...

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 31 lines · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x (in the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output working under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the sigmatel STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and I am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 9 lines
Quoted 4 lines

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec supported in alsa ?
If not could someone please try to add this incredibly nice feature in the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Ranostay
Sent: Wednesday, January 14, 2009 6:15 PM
To: Eric
Cc: [email protected]
Subject: Re: [alsa-devel] intel DP35DP adat supported (STAC927x codec) ?

Hello Eric,

You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 4 lines

under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 7 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 1 line
Quoted 1 line

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec

supported in

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

alsa ?
If not could someone please try to add this incredibly nice feature

in

Quoted 11 lines
Quoted 6 lines
Quoted 1 line

the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

At Fri, 30 Jan 2009 14:41:08 -0800,

Quoted 3 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

I think that mux list is reather "the input source" of SPDIF output, not the output target. i.e. if you choose ADAT there, it means that the input from ADAT will go to SPDIF output.

Takashi

Quoted 78 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Ranostay
Sent: Wednesday, January 14, 2009 6:15 PM
To: Eric
Cc: [email protected]
Subject: Re: [alsa-devel] intel DP35DP adat supported (STAC927x codec) ?

Hello Eric,

You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 4 lines

under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 7 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 1 line
Quoted 1 line

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec

supported in

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

alsa ?
If not could someone please try to add this incredibly nice feature

in

Quoted 11 lines
Quoted 6 lines
Quoted 1 line

the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author
#6 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

Their has never been an ADAT input advertised on the STAC927x codec. What is needed for this codec to work is a switch to change between SPDIF and ADAT mode OUTPUT (on the backpanel toslink).
As shown in the codec datasheet :
When choosing ADAT mode : node 1Fh ADATout (instead of node 1Eh spdif) goes to node 21h Digout.

I think I have to buy the DP35DP so we can make and test the driver modifications for it to work... I am really interested in the intel ADAT output capable motherboard line.
Thanks

Quoted 4 lines

I think that mux list is reather "the input source" of SPDIF output, not the output target. i.e. if you choose ADAT there, it means that the input from ADAT will go to SPDIF output.
Takashi

author
#7 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

In reply to Tellman, Steven

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Please copy me your alsainfo script if it still does not work.

Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 68 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 4 lines

under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 7 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 1 line
Quoted 1 line

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec

supported in

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

alsa ?
If not could someone please try to add this incredibly nice feature

in

Quoted 10 lines
Quoted 5 lines
Quoted 1 line

the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author
#8 lore raw

Re: intel DP35DP adat supported (STAC927x codec) ?

Hi all, I bought motherboards intel DP35DP and DG33TL and just tried ADAT output in Alsa (ADAT output on them is proven to work under windows). I wrote the command (thanks to the work of Matthew for the 'IEC958 Playback Source' control.28 setting) :
amixer sset 'IEC958 Playback Source' ADAT

Here is my resulting alsainfo:
www.alsa-project.org/db/?f=cb01bf4f7bc62fe69f36bc1a4bbc0dbcace20605

It still does not work
I think the reason is that contrary to the windows driver the Node 0x21 is still unchanged :
Pin Default 0x01452150: [Jack] SPDIF Out
whereas it should be better with :

		0x01552150

How can I change my computer from the Pin default config to this alternative Pin config ?

Anybody has any other idea to help ?
Thanks a lot, Eric

Quoted 46 lines

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Please copy me your alsainfo script if it still does not work. Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 36 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.
....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....
I haven't tested ADAT output though but I have no reason to think it wouldn't work.
Thanks,
Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 3 lines

under windows.
Is it working in Alsa ?>>>
Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 3 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.

author
#9 lore raw

Re: to support STAC927x ADATout (intel hda mobo)

Hi again,
Please any developper try to make ADAT output feature of sigmatel/IDT STAC927x codecs (used on most intel HDA media and extreme boards) actually work in ALSA.
ADAT is a great feature and I am an ALSAonly user so I really need your help.

here is the codec datasheet
http://www1.idt.com/products/files/17122877/STAC927x-DS-0-7_IDT.pdf

Can some of you read the 0x1f ADATout converter (page185-188) and 0x21 digitalOUT pin complex (page155-159) and compare them with the sigmatel alsa driver and sigmatel stac927x patch to see what controls are still missing ?

I can test your work and more...
I will help as much as I can,
thanks in advance, Eric

Quoted 68 lines

Hi all, I bought motherboards intel DP35DP and DG33TL and just tried ADAT output in Alsa (ADAT output on them is proven to work under windows). I wrote the command (thanks to the work of Matthew for the 'IEC958 Playback Source' control.28 setting) :
amixer sset 'IEC958 Playback Source' ADAT

Here is my resulting alsainfo:
www.alsa-project.org/db/?f=cb01bf4f7bc62fe69f36bc1a4bbc0dbcace20605

It still does not work
I think the reason is that contrary to the windows driver the Node 0x21 is still unchanged :
Pin Default 0x01452150: [Jack] SPDIF Out
whereas it should be better with :

		0x01552150

How can I change my computer from the Pin default config to this alternative Pin config ?
Thanks a lot, Eric

Quoted 5 lines

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Quoted 41 lines

Please copy me your alsainfo script if it still does not work. Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 36 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.
....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....
I haven't tested ADAT output though but I have no reason to think it wouldn't work.
Thanks,
Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 3 lines

under windows.
Is it working in Alsa ?>>>
Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 3 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.

_______________________________________________
Alsa-devel mailing list

author
#10 lore raw

modify the 0x21 pin config for ADATout (STAC927x hda codec) ?

In reply to Eric

Please somebody give me a simple way so as to have my 0x21 node Pin config change
from my current (Default) 0x01452150: [Jack] SPDIF Out to the aimed 0x01552150

If fact I bought these intel media motherboards ONLY for ADATout and linux use.
Thanks in advance, Eric

Quoted 72 lines

Hi all, I bought motherboards intel DP35DP and DG33TL and just tried ADAT output in Alsa (ADAT output on them is proven to work under windows). I wrote the command (thanks to the work of Matthew for the 'IEC958 Playback Source' control.28 setting) :
amixer sset 'IEC958 Playback Source' ADAT

Here is my resulting alsainfo:
www.alsa-project.org/db/?f=cb01bf4f7bc62fe69f36bc1a4bbc0dbcace20605

It still does not work
I think the reason is that contrary to the windows driver the Node 0x21 is still unchanged :
Pin Default 0x01452150: [Jack] SPDIF Out
whereas it should be better with :

		0x01552150

How can I change my computer from the Pin default config to this alternative Pin config ?

Anybody has any other idea to help ?
Thanks a lot, Eric

Quoted 5 lines

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Quoted 41 lines

Please copy me your alsainfo script if it still does not work. Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 36 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.
....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....
I haven't tested ADAT output though but I have no reason to think it wouldn't work.
Thanks,
Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 3 lines

under windows.
Is it working in Alsa ?>>>
Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 3 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#11 lore raw

Re: modify the 0x21 pin config for ADATout (STAC927x hda codec) ?

At Mon, 06 Apr 2009 03:37:59 +0200,

Quoted 5 lines · Eric

Please somebody give me a simple way so as to have my 0x21 node Pin config change
from my current (Default) 0x01452150: [Jack] SPDIF Out to the aimed 0x01552150

With the very latest alsa-driver, you can change the pin defcfg value
via sysfs. Grab the alsa-driver snapshot tarball below
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
Build it and install it. Then you'll have the files user_pin_configs
in /sys/class/sound/hwC0D* directory. Write the NID and the value
to this file as root.

	# echo 0x21 0x1552150 > /sys/class/sound/hwC0D0/user_pin_configs

Then re-configure the setup by writing 1 to reconfig file there:

	# echo 0x21 0x1552150 > /sys/class/sound/hwC0D0/reconfig

Run "alsactl restore" to restore the mixer status after that.

Takashi

author
#12 lore raw

[STAC927x HDA codec] 0x1F function not supported by driver ?

In reply to Eric

Hi everybody I have some news : bad news but I was prepared to : as of now the alsa codec driver for STAC9271 is not complete : its ADAT output (vendor specific function) support is not complete.
I tested with the ADAT output option Matthew Ranostay had added in a patch ( amixer sset 'IEC958 Playback Source' ADAT )
and also having changed the 0x21 pin default from 014521xx to 015521xx (4 being spdif out and 5 being digital out) : when doing so "alsactl restore" responded : unknown hardware HDAintel STAC ; hardware is
initialized using a guess method (which is possibly normal )
In jack I only had 2 alsa outputs (allways using card0 device 1 : "STAC digital").
Maybe the problem is that ADATout Node 0x1F is not detailled enough in the driver ?

here is COMPLETE codec datasheet (page185 for 0x1F node ; page 155 for 0x21 digOUT node):
http://pdf1.alldatasheet.com/datasheet-pdf/view/199321/IDT/STAC9271.html

here a alsa-info.sh of me (before changing to 015521xx pin config):

www.alsa-project.org/db/?f=297fa42ac3c439e3ca9336d1fa525a2cadabdae6

Hoping to get help to at least try to make it work : I bought intel DP35DP motherboard ONLY for the advertised "ADAToutput feature". Thanks a lot in advance, Eric

Quoted 66 lines

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Please copy me your alsainfo script if it still does not work.

Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 54 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 4 lines

under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 7 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 1 line
Quoted 1 line

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec

supported in

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

alsa ?
If not could someone please try to add this incredibly nice feature

in

Quoted 5 lines
Quoted 5 lines
Quoted 1 line

the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi

author
#13 lore raw

Re: [STAC927x HDA codec] 0x1F function not supported bydriver ?

Any help please... The complete codec datasheet is available (link provided). Functional and complete ALSA driver for this HDA codec would be great.
Thanks in advance, Eric

Quoted 93 lines

Hi everybody I have some news : bad news but I was prepared to : as of now the alsa codec driver for STAC9271 is not complete : its ADAT output (vendor specific function) support is not complete.
I tested with the ADAT output option Matthew Ranostay had added in a patch ( amixer sset 'IEC958 Playback Source' ADAT )
and also having changed the 0x21 pin default from 014521xx to 015521xx (4 being spdif out and 5 being digital out) : when doing so "alsactl restore" responded : unknown hardware HDAintel STAC ; hardware is
initialized using a guess method (which is possibly normal )
In jack I only had 2 alsa outputs (allways using card0 device 1 : "STAC digital").
Maybe the problem is that ADATout Node 0x1F is not detailled enough in the driver ?

here is COMPLETE codec datasheet (page185 for 0x1F node ; page 155 for 0x21 digOUT node):
http://pdf1.alldatasheet.com/datasheet-pdf/view/199321/IDT/STAC9271.html

here a alsa-info.sh of me (before changing to 015521xx pin config):

www.alsa-project.org/db/?f=297fa42ac3c439e3ca9336d1fa525a2cadabdae6

Hoping to get help to at least try to make it work : I bought intel DP35DP motherboard ONLY for the advertised "ADAToutput feature". Thanks a lot in advance, Eric

Quoted 66 lines

Hi Steven,
I have studied the hd audio documents :
Please make sure the pin default is actually 015521xx when in ADAT mode (instead of config default 014521xx ) .

Please copy me your alsainfo script if it still does not work.

Matthew Ranostay is right : really not much is missing or wrong for ADAT to work.
Thanks everybody for future help, Eric

Quoted 54 lines · Steven

It doesn't work. The option comes up, but no dice. Doesn't lock to the receiver that has ADAT support.

Hello Eric,
You should run the latest ALSA from the git tree because I added a codec specific SPDIF output control control for that chipset.

....
417 static const char *stac927x_spdif_labels[5] = {
418 "Digital Playback", "ADAT", "Analog Mux 1",
419 "Analog Mux 2", "Analog Mux 3"
420 };
....

I haven't tested ADAT output though but I have no reason to think it wouldn't work.

Thanks,

Matt Ranostay

Quoted 1 line · Eric

In their handbook, motherboard intel DP35DP and others with STAC927x

(in

Quoted 4 lines

the codec datasheet also ADAT output is featured on older sigmatel STAC9271 and now IDT STAC9274 only) advertise ADAT output possible on their toslink.
DP35DP and other intel boards are proven to have the ADAT output

working

Quoted 4 lines

under windows.
Is it working in Alsa ? Many HTPC users would love that... I would !

Anybody from intel or IDT/sigmatel to confirm (by checking the

sigmatel

Quoted 2 lines

STAC927x hda codec driver) that it will work ?
I want these intel motherboards only for this ADAT output feature and

I

Quoted 7 lines

am a linux only user so I would like to know before buying... I want to be sure someone would make the necessary changes to the hda sigmatel codec alsa driver so it would work.
Thank you everybody

Quoted 1 line
Quoted 1 line

Is the ADAT output of the IDT (sigmatel) STAC927x HDA codec

supported in

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

alsa ?
If not could someone please try to add this incredibly nice feature

in

Quoted 5 lines
Quoted 5 lines
Quoted 1 line

the existing alsa driver ?

Do you have any HD-audio device with ADAT? IIRC, there is no specific verbs for ADAT on STAC927x... Takashi