Skip to contentSkip to conversation

problem with ATI SB600 Azalia

DISCUSSION Rafał Zawadzki 2 participants 7 messages Aug 1, 2007 – Aug 2, 2007

lore
Share & tools
lore
#0 lore raw

Hello. I tried earlier on alsa-user, but nobody answer. Propably this is the better place for this post. I have the same problem as mentioned here:

http://thread.gmane.org/gmane.linux.alsa.devel/47688/focus=47827 (the same laptop).

I tried this solution, but unfortunately i had below error during kernel compilation (kernel source ubuntu 2.6.20-16). What is proper way to make upgrade alsa to alsa-hg?

Building modules, stage 2.
MODPOST 1855 modules
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100036) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100044) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference
to .init.data:init_pg_tables_end from .text between '_text' (at offset 0xc01000a6) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.text:start_kernel from .text between 'is386' (at offset 0xc0100221) and 'check_x87'
WARNING: vmlinux - Section mismatch: reference to .init.text:smp_prepare_cpus from .text between 'init' (at offset 0xc0100437) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init from .text between 'init' (at offset 0xc010043c) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:spawn_ksoftirqd from .text between 'init' (at offset 0xc0100441) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference
to .init.text:spawn_softlockup_task from .text between 'init' (at offset 0xc0100446) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:smp_cpus_done from .text between 'init' (at offset 0xc01004c2) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:sched_init_smp from .text between 'init' (at offset 0xc01004c7) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:cpuset_init_smp from .text between 'init' (at offset 0xc01004cc) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference
to .init.text:usermodehelper_init from .text between 'init' (at offset 0xc01004d6) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:driver_init from .text between 'init' (at offset 0xc01004db) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:sysctl_init from .text between 'init' (at offset 0xc01004e1) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'init' (at offset 0xc0100503) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'init' (at offset 0xc010051c) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:prepare_namespace from .text between 'init' (at offset 0xc01006ff) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:__alloc_bootmem from .text between 'init_gdt' (at offset 0xc010a0cb) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:__alloc_bootmem from .text between 'init_gdt' (at offset 0xc010a0e1) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:sysenter_setup from .text between 'identify_cpu' (at offset 0xc010a73b)
and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference to .init.text:mtrr_bp_init from .text between 'identify_cpu' (at offset 0xc010a745)
and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference
to .init.text:trap_init_f00f_bug from .text between 'init_intel' (at offset 0xc010c796) and 'cpuid4_cache_lookup'
WARNING: vmlinux - Section mismatch: reference to .init.data:initkmem_list3 from .text between 'set_up_list3s' (at offset 0xc017238f) and 's_start'
WARNING: vmlinux - Section mismatch: reference
to .init.text:eisa_root_register from .text between 'pci_eisa_init' (at offset 0xc026f71b) and 'virtual_eisa_release'
WARNING: vmlinux - Section mismatch: reference
to .init.text:eisa_root_register from .text between 'virtual_eisa_root_init' (at offset 0xc026f77f) and 'cpufreq_unregister_driver'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .text between 'iret_exc' (at offset 0xc02f2330) and '_etext'
WARNING: vmlinux - Section mismatch: reference to .init.text:start_kernel from .paravirtprobe between '__start_paravirtprobe' (at offset 0xc03c4790) and '__stop_paravirtprobe'

WARNING: "is_power_of_2" [sound/core/snd-rtctimer.ko] undefined! make[1]: *** [__modpost] Błąd 1
make: *** [modules] Błąd 2 root@antichrist:/usr/src/linux#

Cheers,

Signature · 8 lines
Rafał bluszcz Zawadzki 
http://my.jabberpl.org - use jabber
http://glam.pl - try secondhand clothes
http://bluszcz.net - my homepage
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#1 lore raw

At Wed, 1 Aug 2007 21:57:11 +0200,

Quoted 10 lines · Rafał Zawadzki

Hello. I tried earlier on alsa-user, but nobody answer. Propably this is the better place for this post. I have the same problem as mentioned here:

http://thread.gmane.org/gmane.linux.alsa.devel/47688/focus=47827 (the same laptop).

I tried this solution, but unfortunately i had below error during kernel compilation (kernel source ubuntu 2.6.20-16). What is proper way to make upgrade alsa to alsa-hg?

Use alsa-driver tree to build external modules. You cannot (always) replace the existing kernel code with alsa-kernel tree.

Takashi

#2 lore raw
Quoted 7 lines · On Thursday 02 August 2007 00:09:44 Takashi Iwai wrote:

At Wed, 1 Aug 2007 21:57:11 +0200,

Quoted 4 lines · Rafał Zawadzki

Hello. I tried earlier on alsa-user, but nobody answer. Propably this is the better place for this post. I have the same problem as mentioned here:

Quoted 8 lines
Quoted 6 lines

http://thread.gmane.org/gmane.linux.alsa.devel/47688/focus=47827 (the same laptop).

I tried this solution, but unfortunately i had below error during kernel compilation (kernel source ubuntu 2.6.20-16). What is proper way to make upgrade alsa to alsa-hg?

Use alsa-driver tree to build external modules.

It is not so easy :) :

./configure: line 11726: ALSA_TOPLEVEL_SELECT: command not found ./configure: line 11739: ALSA_TOPLEVEL_DEFINES: command not found ./configure: line 11749: ALSA_TOPLEVEL_OUTPUT: command not found
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir setting
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: error: cannot find input file: toplevel.config.in

bluszcz@antichrist:~/usr/src/alsachuj/alsa-driver$   

Any idea?

Signature · 4 lines
Rafał bluszcz Zawadzki 
http://my.jabberpl.org - use jabber
http://glam.pl - try secondhand clothes
http://bluszcz.net - my homepage
#3 lore raw

At Thu, 2 Aug 2007 00:32:00 +0200,

Quoted 12 lines · Rafał Zawadzki
Quoted 10 lines · On Thursday 02 August 2007 00:09:44 Takashi Iwai wrote:

At Wed, 1 Aug 2007 21:57:11 +0200,

Quoted 7 lines · Rafał Zawadzki

Hello. I tried earlier on alsa-user, but nobody answer. Propably this is the better place for this post. I have the same problem as mentioned here:

http://thread.gmane.org/gmane.linux.alsa.devel/47688/focus=47827 (the same laptop).

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

I tried this solution, but unfortunately i had below error during kernel compilation (kernel source ubuntu 2.6.20-16). What is proper way to make upgrade alsa to alsa-hg?

Use alsa-driver tree to build external modules.

It is not so easy :) :

Did you read INSTALL file there? There is ./hgcompile script for convenience.

Also, for people who are lazy to use HG, there are also daily snapshot tarballs at
ftp://ftp.suse.com/pub/projects/alsa/snapshot/

Takashi

#4 lore raw
Quoted 2 lines · On Thursday 02 August 2007 11:15:09 Takashi Iwai wrote:

Did you read INSTALL file there? There is ./hgcompile script for convenience.

I read also and tried in this way:

./hgcompile
Makefile:24: toplevel.config: No such file or directory
make: *** Brak reguł do wykonania obiektu `toplevel.config'. Stop.

I found this file in prepackages version, but not in HG one.

Signature · 4 lines
Rafał bluszcz Zawadzki 
http://my.jabberpl.org - use jabber
http://glam.pl - try secondhand clothes
http://bluszcz.net - my homepage
#5 lore raw
Quoted 9 lines · On Thursday 02 August 2007 14:20:25 Rafał Zawadzki wrote:
Quoted 2 lines · On Thursday 02 August 2007 11:15:09 Takashi Iwai wrote:

Did you read INSTALL file there? There is ./hgcompile script for convenience.

I read also and tried in this way:

./hgcompile
Makefile:24: toplevel.config: No such file or directory
make: *** Brak reguł do wykonania obiektu `toplevel.config'. Stop.

..............

checking for PCMCIA support... yes
checking for PC9800 support in kernel... no
checking for parallel port support... yes
checking for power management... yes
./configure: line 11726: ALSA_TOPLEVEL_SELECT: command not found ./configure: line 11739: ALSA_TOPLEVEL_DEFINES: command not found ./configure: line 11749: ALSA_TOPLEVEL_OUTPUT: command not found
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir setting
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: error: cannot find input file: toplevel.config.in

Thanks for you time Takashi, cheers.

Signature · 4 lines
Rafał bluszcz Zawadzki 
http://my.jabberpl.org - use jabber
http://glam.pl - try secondhand clothes
http://bluszcz.net - my homepage
#6 lore raw

At Thu, 2 Aug 2007 14:21:25 +0200,

Quoted 14 lines · Rafał Zawadzki
Quoted 9 lines · On Thursday 02 August 2007 14:20:25 Rafał Zawadzki wrote:
Quoted 2 lines · On Thursday 02 August 2007 11:15:09 Takashi Iwai wrote:

Did you read INSTALL file there? There is ./hgcompile script for convenience.

I read also and tried in this way:

./hgcompile
Makefile:24: toplevel.config: No such file or directory
make: *** Brak reguł do wykonania obiektu `toplevel.config'. Stop.

..............

Quoted 16 lines

checking for PCMCIA support... yes
checking for PC9800 support in kernel... no
checking for parallel port support... yes
checking for power management... yes
./configure: line 11726: ALSA_TOPLEVEL_SELECT: command not found ./configure: line 11739: ALSA_TOPLEVEL_DEFINES: command not found ./configure: line 11749: ALSA_TOPLEVEL_OUTPUT: command not found
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir setting
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: error: cannot find input file: toplevel.config.in

	% cd alsa-driver
	% hg purge --all
	% ./hgcompile

Takashi