ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB
PATCH 1/1 ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB
For the RODE NT-USB the lowest Playback mixer volume setting mutes the audio output. But it is not reported as such causing e.g. PulseAudio to accidentally mute the device when selecting a low volume.
Fix this by applying the existing quirk for this kind of issue when the device is detected.
Signed-off-by Lars-Peter Clausen <[email protected]>
--- sound/usb/mixer_quirks.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
sound/usb/mixer_quirks.c +4 -3
@@ -3360,9 +3360,10 @@ void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,if (unitid ==7 && cval->control ==UAC_FU_VOLUME )snd_dragonfly_quirk_db_scale (mixer, cval, kctl);break ; -/* lowest playback value is muted on C-Media devices */ -case USB_ID (0x0d8c ,0x000c ): -case USB_ID (0x0d8c ,0x0014 ): +/* lowest playback value is muted on some devices */ +case USB_ID (0x0d8c ,0x000c ):/* C-Media */ +case USB_ID (0x0d8c ,0x0014 ):/* C-Media */ +case USB_ID (0x19f7 ,0x0003 ):/* RODE NT-USB */ if (strstr (kctl->id.name,"Playback" )) cval->min_mute =1 ;break ;
Signature · 1 line
2.30.2
Takashi Iwai
AppliedQuoted 9 lines · Lars-Peter Clausen
For the RODE NT-USB the lowest Playback mixer volume setting mutes the audio output. But it is not reported as such causing e.g. PulseAudio to accidentally mute the device when selecting a low volume.
Fix this by applying the existing quirk for this kind of issue when the device is detected.
Signed-off-by Lars-Peter Clausen <[email protected]>
Thanks, applied now.
Takashi