Skip to contentSkip to conversation

Alsa update in mainline broke ATI-IXP sound driver

DISCUSSION Andi Kleen 2 participants 12 messages Jun 25, 2006 – Jun 29, 2006

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:955:(snd_func_refer) error evaluating name
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3962:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2099:(snd_pcm_open_noupdate) Unknown PCM default

no matter how often I try. OSS clients also don't seem to work.
(in older kernels it sometimes didn't work on first try after boot, now it doesn't work at all)

The module loaded ok:

snd_pcm_oss            39328  0 
snd_mixer_oss          14784  1 snd_pcm_oss
snd_atiixp             16536  0 
snd_ac97_codec         97980  1 snd_atiixp
snd_ac97_bus            2688  1 snd_ac97_codec
snd_pcm                72328  3 snd_pcm_oss,snd_atiixp,snd_ac97_codec
snd_timer              19784  1 snd_pcm
snd_page_alloc          7824  2 snd_atiixp,snd_pcm
snd                    49280  6 snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller

I can't find any output from alsa in the kernel log except for

PCI: Enabling device 0000:00:14.5 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 217

when restarting rcalsasoudn

User land is from SUSE 10.0

-Andi

config:

#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

#1 lore raw

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 8 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp. If the ATI IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

Then check whether /dev/snd/controlC0 exists. If not, it's likely a udev thingy. Possibly upgrading udev package might help...

Takashi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#2 lore raw
Quoted 8 lines · Takashi Iwai

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 6 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

Quoted 8 lines
Quoted 2 lines

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp. If the ATI IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

I'll defer testing because -git9 broke SATA too until after that is fixed.

-Andi (who hasn't had such a low quality kernel for a long time)

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#3 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

In reply to Takashi Iwai
Quoted 6 lines · Takashi Iwai

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 4 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

Quoted 8 lines
Quoted 4 lines

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp.

Checking it now. There is no /proc/asound.

% ls /proc/asound
/bin/ls: /proc/asound: No such file or directory

These are my config options

CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m

Quoted 6 lines

If the ATI
IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

Then check whether /dev/snd/controlC0 exists. If not, it's likely a udev thingy. Possibly upgrading udev package might help...

% ls -l /dev/snd/controlC0
crw------- 1 andi audio 116, 0 2006-06-25 21:38 /dev/snd/controlC0

% grep sound /proc/devices
14 sound

-Andi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#4 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

In reply to Takashi Iwai
Quoted 11 lines · Takashi Iwai

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 8 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 8 lines
Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp. If the ATI IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

Then check whether /dev/snd/controlC0 exists. If not, it's likely a udev thingy. Possibly upgrading udev package might help...

First /proc/asound appeared now - in the first try the modules weren't correctly loaded. The card is shown there

0 [IXP ]: ATIIXP - ATI IXP

                      ATI IXP rev 0 with ALC658D at 0xfe029000, irq 217

I added some instrumentation to the driver now and the probe function seems to run completely - at least it hits its return 0.

The device file is also still there so I don't think udev is to blame.

-Andi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#5 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

In reply to Takashi Iwai
Quoted 11 lines · Takashi Iwai

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 8 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 8 lines
Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp. If the ATI IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

Then check whether /dev/snd/controlC0 exists. If not, it's likely a udev thingy. Possibly upgrading udev package might help...

First /proc/asound appeared now - in the first try the modules weren't correctly loaded. The card is shown there

0 [IXP ]: ATIIXP - ATI IXP

                      ATI IXP rev 0 with ALC658D at 0xfe029000, irq 217

I added some instrumentation to the driver now and the probe function seems to run completely - at least it hits its return 0.

The device file is also still there so I don't think udev is to blame.

-Andi

#6 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

At Mon, 26 Jun 2006 18:45:32 +0200,

Quoted 25 lines · Andi Kleen
Quoted 11 lines · Takashi Iwai

At Sun, 25 Jun 2006 21:39:35 +0200,

Quoted 8 lines · Andi Kleen

Since I updated an ATI x86-64 box to 2.6.17-git6 sound doesn't work anymore.

I just get

ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device

(snip)

Quoted 8 lines
Quoted 1 line

User land is from SUSE 10.0

First check /proc/asound/cards after loading snd-atiixp. If the ATI IXP entry appears, the device was initialized and set up. If not, something wrong in the driver initialization.

Then check whether /dev/snd/controlC0 exists. If not, it's likely a udev thingy. Possibly upgrading udev package might help...

First /proc/asound appeared now - in the first try the modules weren't correctly loaded. The card is shown there

Quoted 8 lines

0 [IXP ]: ATIIXP - ATI IXP

                      ATI IXP rev 0 with ALC658D at 0xfe029000, irq 217

I added some instrumentation to the driver now and the probe function seems to run completely - at least it hits its return 0.

The device file is also still there so I don't think udev is to blame.

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

Takashi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#7 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

Quoted 6 lines

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Yes.

Quoted 1 line

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

With that it finally works. Thanks.

Still can it be fixed?

-Andi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#8 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

In reply to Takashi Iwai
Quoted 6 lines

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Yes.

Quoted 1 line

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

With that it finally works. Thanks.

Still can it be fixed?

-Andi

#9 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

At Mon, 26 Jun 2006 20:28:31 +0200,

Quoted 8 lines · Andi Kleen
Quoted 7 lines

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Quoted 7 lines

Yes.

Quoted 1 line

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

With that it finally works. Thanks.

Still can it be fixed?

Well, the bug shall be fixed :)

Unfortunately I cannot reproduce this on my systems that are all based on SUSE 10.1, and the latest 2.6.17-git works fine even CONFIG_SND_DYNAMIC_MINORS=n as far as I've tested.

Could you check the strace and what open error occurs? I suppose it's /dev/snd/controlC0, but don't figure out exactly.

thanks,

Takashi

author
#10 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

Quoted 18 lines · Takashi Iwai

At Mon, 26 Jun 2006 20:28:31 +0200,

Quoted 8 lines · Andi Kleen
Quoted 7 lines

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Quoted 7 lines

Yes.

Quoted 1 line

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

With that it finally works. Thanks.

Still can it be fixed?

Quoted 8 lines

Well, the bug shall be fixed :)

Unfortunately I cannot reproduce this on my systems that are all based on SUSE 10.1, and the latest 2.6.17-git works fine even CONFIG_SND_DYNAMIC_MINORS=n as far as I've tested.

Could you check the strace and what open error occurs? I suppose it's /dev/snd/controlC0, but don't figure out exactly.

Sorry for the delay

(as root) I get

5184 open("/dev/snd/controlC0", O_RDONLY) = -1 EACCES (Permission denied) 5184 open("/dev/snd/controlC1", O_RDONLY) = -1 EACCES (Permission denied) ... (upto 31) ...
5184 open("/dev/sound/dsp", O_WRONLY|O_NONBLOCK) = -1 ENOENT (No such file or d 5184 open("/dev/dsp", O_WRONLY|O_NONBLOCK) = -1 EACCES (Permission denied)

ccontrol0 is
crw------- 1 andi audio 116, 6 2006-06-29 11:49 /dev/snd/controlC0

It also doesn't work as andi

I stuck printks to the EACCES in sound/* and they don't trigger so it must be somewhere else.

-Andi

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

author
#11 lore raw

Re: Alsa update in mainline broke ATI-IXP sound driver II

In reply to Takashi Iwai
Quoted 18 lines · Takashi Iwai

At Mon, 26 Jun 2006 20:28:31 +0200,

Quoted 8 lines · Andi Kleen
Quoted 7 lines

OK, and still you get the same error like:

	ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
	...

??

Quoted 7 lines

Yes.

Quoted 1 line

Any change if you set CONFIG_SND_DYNAMIC_MINORS=y ?

With that it finally works. Thanks.

Still can it be fixed?

Quoted 8 lines

Well, the bug shall be fixed :)

Unfortunately I cannot reproduce this on my systems that are all based on SUSE 10.1, and the latest 2.6.17-git works fine even CONFIG_SND_DYNAMIC_MINORS=n as far as I've tested.

Could you check the strace and what open error occurs? I suppose it's /dev/snd/controlC0, but don't figure out exactly.

Sorry for the delay

(as root) I get

5184 open("/dev/snd/controlC0", O_RDONLY) = -1 EACCES (Permission denied) 5184 open("/dev/snd/controlC1", O_RDONLY) = -1 EACCES (Permission denied) ... (upto 31) ...
5184 open("/dev/sound/dsp", O_WRONLY|O_NONBLOCK) = -1 ENOENT (No such file or d 5184 open("/dev/dsp", O_WRONLY|O_NONBLOCK) = -1 EACCES (Permission denied)

ccontrol0 is
crw------- 1 andi audio 116, 6 2006-06-29 11:49 /dev/snd/controlC0

It also doesn't work as andi

I stuck printks to the EACCES in sound/* and they don't trigger so it must be somewhere else.

-Andi