Skip to contentSkip to conversation

snd-hda-intel module now working

DISCUSSION randall 2 participants 3 messages Jun 19, 2008

lore
Share & tools
lore

randall

author
#0 lore raw

After rebuilding the kernel about 5 times and double-checking the KMixer controls, I have finally successfully been able to get the onboard sound working. Took 2 days tweaking and rebuilding the kernel.

I used the "3stack-6ch-dig" setting for the model and turned on a SND debug variable.

- Randall

#1 lore raw

At Wed, 18 Jun 2008 17:02:25 -0700,

Quoted 7 lines · randall

After rebuilding the kernel about 5 times and double-checking the KMixer controls, I have finally successfully been able to get the onboard sound working. Took 2 days tweaking and rebuilding the kernel.

I used the "3stack-6ch-dig" setting for the model and turned on a SND debug variable.

Could you give the alsa-info.sh output for adding your device to the list in the source code?

thanks,

Takashi

#2 lore raw

At Thu, 19 Jun 2008 11:43:22 +0200,

Quoted 8 lines · I wrote:

At Wed, 18 Jun 2008 17:02:25 -0700,

Quoted 5 lines · randall

After rebuilding the kernel about 5 times and double-checking the KMixer controls, I have finally successfully been able to get the onboard sound working. Took 2 days tweaking and rebuilding the kernel.

Quoted 5 lines
Quoted 2 lines

I used the "3stack-6ch-dig" setting for the model and turned on a SND debug variable.

Could you give the alsa-info.sh output for adding your device to the list in the source code?

Never mind, I found your first post. (It didn't appear on ML because you are no subscriber and the post was blocked until today.)

Which ECS mobo model is it exactly? A more detailed information would be helpful for others to guess a model string.

thanks,

Takashi

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php