sb live (emu10k1) stops working between 2.6.23.1 and 2.6.23.7
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Brian,
The solution is here:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2007-11/msg06482.html
You just need to run "alsactl -F restore" to force restoration of your previous settings. This needs to be done while /etc/asound.state consists of your settings that work correctly under your previous kernel. Hopefully Fedora hasn't already overwritten /etc/asound.state, I actually manually run alsactl from /etc/rc.local and disable the alsa service just to prevent my settings from being overwritten.
If your settings have already been overwritten, you may need to boot into the old kernel, get it working, save the alsamixer settings (alsactl store), reboot to the new kernel, then run "alsactl -F restore". A hassle, I know.
You might want to report this bug to the Fedora bug tracking system -- in my opinion these kind of changes should not be made just for a minor kernel update.
I also wonder if it is even possible to get digital output working under newer kernels without an existing asound.state -- I tried in vain for hours to get it working again by just using alsamixer, and I wasn't getting anywhere. asound.state consists of 225 controls for my SB Live, and only 40 or so are exposed in alsamixer. I wonder if alsamixer isn't exposing the necessary control to enable digital output under newer kernels.
Jim
Quoted 23 lines · Brian
Hi Jim,
I've come across the exact same issue with my Creative Audigy ZS 2 and its digital output... the sound no longer works after I upgraded my kernel to 2.6.23.8-34.fc7 (I'm running Fedora 7). Same error message when using alsactl, etc. I'm trying to fix this, and I'm not quite sure exactly what you mean by "Simply replacing the 2.6.23.7
emumixer.cwith the version included in 2.6.23.1 I was able to get digital output working again under 2.6.23.7". Could you explain in further detail how I would go about doing this to fix this problem? Would this require the kernel to be recompiled with the differentemumixer.cfile?I'm starting to wonder if I should just wait it out for another kernel update that will hopefully have this issue fixed rather than spending so much time on it trying to fix it now.
Any help you can provide is very much appreciated.
Thanks in advance.
Brian
At Fri, 21 Dec 2007 09:44:15 -0500 (EST),
Quoted 14 lines · Jim Faulkner
Hi Brian,
The solution is here:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2007-11/msg06482.htmlYou just need to run "alsactl -F restore" to force restoration of your previous settings. This needs to be done while
/etc/asound.stateconsists of your settings that work correctly under your previous kernel. Hopefully Fedora hasn't already overwritten/etc/asound.state, I actually manually run alsactl from/etc/rc.localand disable the alsa service just to prevent my settings from being overwritten.
Quoted 4 lines
If your settings have already been overwritten, you may need to boot into the old kernel, get it working, save the alsamixer settings (alsactl store), reboot to the new kernel, then run "alsactl -F restore". A hassle, I know.
Rather remove once /etc/asound.state and reload the driver. Then it'll be in a "clean" state. Now you just need to adjust a few important controls, "Master" and "PCM" for analog playback, for example.
Takashi