Audio crackles with 4.1-rc1
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll concentrate on those first.
Hopefully relevant dmesg output for the device:
[ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
I have:
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=600
set in my kernel config. There's no dmesg output around the times when the crackling is occurring.
J.
Signature · 1 line
Friends are God's apology for relations.
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 31 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Hopefully relevant dmesg output for the device:
[ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
Quoted 6 lines
I have:
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=600set in my kernel config. There's no dmesg output around the times when the crackling is occurring.
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.
And, take alsa-info.sh output snapshot while the noise. Run the script with --no-upload option and attach the output file. Also, take alsa-info.sh output on 4.0 kernel for comparison, too. At best, take a snapshot in the similar situation (in power save, etc).
The possibly affecting change was the support of widget power saving. For disabling it, try to comment out the line
codec->power_save_node = 1;
in patch_alc269() in sound/pci/hda/patch_realtek.c.
Takashi
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 11 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.
Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.
The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Quoted 4 lines
And, take
alsa-info.shoutput snapshot while the noise. Run the script with --no-upload option and attach the output file. Also, takealsa-info.shoutput on 4.0 kernel for comparison, too. At best, take a snapshot in the similar situation (in power save, etc).
Unfortunately the crackle is really very brief so it's difficult to catch it in the act. I've attached the alsa-info.sh output from when the above is reporting suspended and then when it's reporting active.
Quoted 4 lines
The possibly affecting change was the support of widget power saving. For disabling it, try to comment out the line
codec->power_save_node = 1;in
patch_alc269()insound/pci/hda/patch_realtek.c.
I'll try this out but it's probably going to be at least tomorrow before I have time.
J.
Signature · 3 lines
xmpp:[email protected] 101 things you can't have too much of : 10 - CDs.
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Tue Apr 28 12:29:47 UTC 2015
!!Linux Distribution
!!------------------
Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14
!!Kernel Information
!!------------------
Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7e34000 irq 48
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e30000 irq 47!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:03.0 0403: 8086:0a0c (rev 0b)
Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC3226
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x102805ca
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker+LO Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x3f 0x3f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Headset Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Headset Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00]
Connection: 2
0x02 0x03
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Front Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Line Out Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Headset Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Headset Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=124
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 8
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x18* 0x19 0x1a 0x1b 0x1d 0x0bNode 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 28 13:29 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Apr 27 23:24 .
drwxr-xr-x 3 root root 280 Apr 27 23:24 ..
lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
# pcm.bluetooth {
# type plug
# slave {
# pcm "bluetooth_hw"
# }
# }
# pcm.bluetooth_hw {
# type bluetooth
# device 00:02:3C:27:1A:0E
# profile "auto"
# }
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
# If defaults.namehint.showall is set to off in alsa.conf, then this is
# necessary to make this pcm show up in the list returned by
# snd_device_name_hint or aplay -L
hint.description "Default Audio Device"
}
ctl.!default {
type pulse
}!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47'
Mixer name : 'Realtek ALC3226'
Components : 'HDA:10ec0292,102805ca,00100001'
Controls : 29
Simple ctrls : 15
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 64 [74%] [-17.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker+LO',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB]
Front Right: Playback 87 [100%] [0.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Line Out',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [on]
Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker'
Item0: 'Line Out+Speaker'
Simple mixer control 'Dock Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Headset Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Headset Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Speaker+LO Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Line Out Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Dock Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.7 {
iface MIXER
name 'Dock Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Headset Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.9 {
iface MIXER
name 'Headset Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Auto-Mute Mode'
value 'Line Out+Speaker'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 'Speaker Only'
item.2 'Line Out+Speaker'
}
}
control.11 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Dock Mic'
item.1 'Headset Mic'
item.2 'Internal Mic'
}
}
control.12 {
iface MIXER
name 'Capture Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
}
}
control.13 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.14 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.15 {
iface MIXER
name 'Headset Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.16 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 1
value.1 1
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
}
}
control.17 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -1725
}
}
control.18 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface CARD
name 'Headset Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.21 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.22 {
iface CARD
name 'Dock Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Front Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.24 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.26 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.27 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.28 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
msrcpufreq_stats
ctr
ccmbinfmt_misc
bnep
nfsdauth_rpcgssoid_registrynfs_acl
nfs
lockd
grace
fscache
sunrpcnls_utf8nls_cp437
vfat
fat
arc4
joydevqmi_wwancdc_mbim
btusb
btintelintel_rapliosf_mbicdc_ncm
bluetoothcdc_wdmx86_pkg_temp_thermalintel_powerclamp
usbnet
pcspkr
miitpm_tis
iwlmvm
mac80211
8250serial_core
iwlwifisnd_hda_codec_hdmi
psmousesnd_hda_codec_realtek
cfg80211
efivarsserio_rawsnd_hda_codec_generichid_multitouchi2c_i801
battery
acsnd_hda_intelsnd_hda_controllersnd_hda_codecsnd_hwdepsnd_hda_core
evdevsnd_pcmsnd_timer
processormd_modtpm_rng
tpmrng_core
fuse
autofs4algif_skcipheraf_alghid_generic
usbhidcrct10dif_pclmulcrc32_pclmulcrc32c_intelghash_clmulni_intel
sgehci_pcisdhci_pciehci_hcdxhci_pcixhci_hcd
thermalsdhci_acpi
sdhcimmc_corei2c_hid
hid
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x05 0x185600100x06 0x185600100x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:0x12 0x90a601400x13 0x411111f00x14 0x901701100x15 0x0221401f0x16 0x010140200x18 0x411111f00x19 0x01a190300x1a 0x411111f00x1b 0x411111f00x1d 0x407000010x1e 0x411111f0
/sys/class/sound/hwC1D0/driver_pin_configs:0x16 0x210140200x19 0x21a190300x1a 0x01a1913c
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Tue Apr 28 12:29:27 UTC 2015
!!Linux Distribution
!!------------------
Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14
!!Kernel Information
!!------------------
Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7e34000 irq 48
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e30000 irq 47!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:03.0 0403: 8086:0a0c (rev 0b)
Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC3226
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x102805ca
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker+LO Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x3f 0x3f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Headset Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Headset Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00]
Connection: 2
0x02 0x03
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Front Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Line Out Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Headset Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Headset Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=124
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 8
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x18* 0x19 0x1a 0x1b 0x1d 0x0bNode 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 28 13:29 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Apr 27 23:24 .
drwxr-xr-x 3 root root 280 Apr 27 23:24 ..
lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
# pcm.bluetooth {
# type plug
# slave {
# pcm "bluetooth_hw"
# }
# }
# pcm.bluetooth_hw {
# type bluetooth
# device 00:02:3C:27:1A:0E
# profile "auto"
# }
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
# If defaults.namehint.showall is set to off in alsa.conf, then this is
# necessary to make this pcm show up in the list returned by
# snd_device_name_hint or aplay -L
hint.description "Default Audio Device"
}
ctl.!default {
type pulse
}!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47'
Mixer name : 'Realtek ALC3226'
Components : 'HDA:10ec0292,102805ca,00100001'
Controls : 29
Simple ctrls : 15
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 64 [74%] [-17.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker+LO',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB]
Front Right: Playback 87 [100%] [0.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Line Out',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [on]
Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker'
Item0: 'Line Out+Speaker'
Simple mixer control 'Dock Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Headset Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Headset Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Speaker+LO Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Line Out Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Dock Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.7 {
iface MIXER
name 'Dock Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Headset Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.9 {
iface MIXER
name 'Headset Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Auto-Mute Mode'
value 'Line Out+Speaker'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 'Speaker Only'
item.2 'Line Out+Speaker'
}
}
control.11 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Dock Mic'
item.1 'Headset Mic'
item.2 'Internal Mic'
}
}
control.12 {
iface MIXER
name 'Capture Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
}
}
control.13 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.14 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.15 {
iface MIXER
name 'Headset Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.16 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 1
value.1 1
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
}
}
control.17 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -1725
}
}
control.18 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface CARD
name 'Headset Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.21 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.22 {
iface CARD
name 'Dock Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Front Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.24 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.26 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.27 {
iface PCM
name 'Playback Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.28 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
msrcpufreq_stats
ctr
ccmbinfmt_misc
bnep
nfsdauth_rpcgssoid_registrynfs_acl
nfs
lockd
grace
fscache
sunrpcnls_utf8nls_cp437
vfat
fat
arc4
joydevqmi_wwancdc_mbim
btusb
btintelintel_rapliosf_mbicdc_ncm
bluetoothcdc_wdmx86_pkg_temp_thermalintel_powerclamp
usbnet
pcspkr
miitpm_tis
iwlmvm
mac80211
8250serial_core
iwlwifisnd_hda_codec_hdmi
psmousesnd_hda_codec_realtek
cfg80211
efivarsserio_rawsnd_hda_codec_generichid_multitouchi2c_i801
battery
acsnd_hda_intelsnd_hda_controllersnd_hda_codecsnd_hwdepsnd_hda_core
evdevsnd_pcmsnd_timer
processormd_modtpm_rng
tpmrng_core
fuse
autofs4algif_skcipheraf_alghid_generic
usbhidcrct10dif_pclmulcrc32_pclmulcrc32c_intelghash_clmulni_intel
sgehci_pcisdhci_pciehci_hcdxhci_pcixhci_hcd
thermalsdhci_acpi
sdhcimmc_corei2c_hid
hid
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x05 0x185600100x06 0x185600100x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:0x12 0x90a601400x13 0x411111f00x14 0x901701100x15 0x0221401f0x16 0x010140200x18 0x411111f00x19 0x01a190300x1a 0x411111f00x1b 0x411111f00x1d 0x407000010x1e 0x411111f0
/sys/class/sound/hwC1D0/driver_pin_configs:0x16 0x210140200x19 0x21a190300x1a 0x01a1913c
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 27 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 11 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
Quoted 7 lines
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give alsa-info.sh output on both 4.0 and 4.1.
Takashi
At Tue, 28 Apr 2015 15:05:20 +0200,
Quoted 35 lines · Takashi Iwai
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 32 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 11 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
Quoted 8 lines
Quoted 2 lines
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give
alsa-info.shoutput on both 4.0 and 4.1.
Also, does the click noise occur only at powering up, and not at powering down?
Takashi
Quoted 38 lines · Takashi Iwai
At Tue, 28 Apr 2015 15:05:20 +0200,
Quoted 36 lines · Takashi Iwai
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 33 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 10 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Quoted 8 lines
Quoted 5 lines
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give
alsa-info.shoutput on both 4.0 and 4.1.Also, does the click noise occur only at powering up, and not at powering down?
The click is only on the transition from suspended to active; not constantly during playback and not when transitioning from active to suspended. It doesn't appear 4.0 is doing the suspending at all; there are no /sys/bus/hdaudio/devices/*/power/runtime_status files and the card runtime_status is always active. alsa-info for 4.0 + 4.1-rc1 attached.
J.
Signature · 1 line
If this isn't war, why is CNN massing on the border?
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Wed Apr 29 11:22:46 UTC 2015
!!Linux Distribution
!!------------------
Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14
!!Kernel Information
!!------------------
Kernel release: 4.0.0 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.0.0 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7e34000 irq 49
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e30000 irq 48!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:03.0 0403: 8086:0a0c (rev 0b)
Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=1, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D3, actual=D3
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D3, actual=D3
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC3226
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x102805ca
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker+LO Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x3f 0x3f]
Converter: stream=4, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Headset Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Headset Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00]
Connection: 2
0x02 0x03
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Front Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Line Out Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Headset Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Headset Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=124
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 8
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x18* 0x19 0x1a 0x1b 0x1d 0x0bNode 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 6 Apr 29 12:21 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 2 Apr 29 12:21 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 10 Apr 29 12:21 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 5 Apr 29 12:21 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 7 Apr 29 12:21 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 8 Apr 29 12:21 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 9 Apr 29 12:21 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 4 Apr 29 12:21 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 3 Apr 29 12:22 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 29 12:21 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 29 12:21 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Apr 29 12:21 .
drwxr-xr-x 3 root root 280 Apr 29 12:21 ..
lrwxrwxrwx 1 root root 12 Apr 29 12:21 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 29 12:21 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
# pcm.bluetooth {
# type plug
# slave {
# pcm "bluetooth_hw"
# }
# }
# pcm.bluetooth_hw {
# type bluetooth
# device 00:02:3C:27:1A:0E
# profile "auto"
# }
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
# If defaults.namehint.showall is set to off in alsa.conf, then this is
# necessary to make this pcm show up in the list returned by
# snd_device_name_hint or aplay -L
hint.description "Default Audio Device"
}
ctl.!default {
type pulse
}!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 49'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 48'
Mixer name : 'Realtek ALC3226'
Components : 'HDA:10ec0292,102805ca,00100001'
Controls : 29
Simple ctrls : 15
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 64 [74%] [-17.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker+LO',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB]
Front Right: Playback 87 [100%] [0.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Line Out',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [on]
Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker'
Item0: 'Line Out+Speaker'
Simple mixer control 'Dock Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Headset Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Headset Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Speaker+LO Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Line Out Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Dock Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.7 {
iface MIXER
name 'Dock Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Headset Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.9 {
iface MIXER
name 'Headset Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Auto-Mute Mode'
value 'Line Out+Speaker'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 'Speaker Only'
item.2 'Line Out+Speaker'
}
}
control.11 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Dock Mic'
item.1 'Headset Mic'
item.2 'Internal Mic'
}
}
control.12 {
iface MIXER
name 'Capture Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
}
}
control.13 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.14 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.15 {
iface MIXER
name 'Headset Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.16 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 1
value.1 1
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
}
}
control.17 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -1725
}
}
control.18 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface CARD
name 'Headset Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.21 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.22 {
iface CARD
name 'Dock Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Front Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.24 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.26 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.27 {
iface PCM
name 'Playback Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.28 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
ctr
ccmbinfmt_misc
bnep
nfsdauth_rpcgssoid_registrynfs_acl
nfs
lockd
grace
fscache
sunrpcnls_utf8nls_cp437
vfat
fat
arc4qmi_wwan
joydevsnd_hda_codec_hdmi
iwlmvmsnd_hda_codec_realtek
mac80211snd_hda_codec_genericintel_rapliosf_mbisnd_hda_intelsnd_hda_controllercdc_mbimx86_pkg_temp_thermalsnd_hda_codeccdc_ncm
iwlwifisnd_hwdepcdc_wdmintel_powerclamp
usbnet
psmousesnd_pcmserio_raw
efivars
mii
btusbi2c_i801
cfg80211
pcspkrhid_multitouch
bluetoothsnd_timertpm_tis
battery
8250serial_core
ac
evdev
processormd_modtpm_rng
tpmrng_core
fuse
autofs4algif_skcipheraf_alghid_generic
usbhidcrct10dif_pclmulcrc32_pclmulcrc32c_intelghash_clmulni_intel
sgehci_pciehci_hcdsdhci_pcixhci_pcixhci_hcd
thermali2c_hid
hidsdhci_acpi
sdhcimmc_core
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x05 0x185600100x06 0x185600100x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:0x12 0x90a601400x13 0x411111f00x14 0x901701100x15 0x0221401f0x16 0x010140200x18 0x411111f00x19 0x01a190300x1a 0x411111f00x1b 0x411111f00x1d 0x407000010x1e 0x411111f0
/sys/class/sound/hwC1D0/driver_pin_configs:0x16 0x210140200x19 0x21a190300x1a 0x01a1913c
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.961306] PM: Hibernation image not present or could not be loaded. [ 0.961310] ALSA device list: [ 0.961310] No soundcards found. [ 1.347610] tsc: Refined TSC clocksource calibration: 2494.226 MHz -- [ 38.234184] usbcore: registered new interface driver btusb [ 38.235613] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 38.235735] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff818a9bc0) [ 38.239314] intel_rapl: Found RAPL domain package -- [ 38.239802] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 38.251672] sound hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 38.251675] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 38.251676] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 38.251677] sound hdaudioC1D0: mono: mono_out=0x0 [ 38.251678] sound hdaudioC1D0: inputs: [ 38.251680] sound hdaudioC1D0: Dock Mic=0x19 [ 38.251681] sound hdaudioC1D0: Headset Mic=0x1a [ 38.251682] sound hdaudioC1D0: Internal Mic=0x12 [ 38.257532] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 38.257652] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12 [ 38.257699] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled [ 38.257920] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled [ 38.258853] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 38.258924] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 38.258986] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 38.274556] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 38.274620] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 38.274673] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 38.276879] qmi_wwan 1-7:1.8: cdc-wdm2: USB WDM device
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Wed Apr 29 11:19:52 UTC 2015
!!Linux Distribution
!!------------------
Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14
!!Kernel Information
!!------------------
Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7e34000 irq 48
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e30000 irq 47!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:03.0 0403: 8086:0a0c (rev 0b)
Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC3226
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x102805ca
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker+LO Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC3226 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x3f 0x3f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Headset Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Headset Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00]
Connection: 2
0x02 0x03
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Front Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Line Out Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Headset Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Headset Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=124
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 8
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x18* 0x19 0x1a 0x1b 0x1d 0x0bNode 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 29 12:19 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Apr 27 23:24 .
drwxr-xr-x 3 root root 280 Apr 27 23:24 ..
lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
# pcm.bluetooth {
# type plug
# slave {
# pcm "bluetooth_hw"
# }
# }
# pcm.bluetooth_hw {
# type bluetooth
# device 00:02:3C:27:1A:0E
# profile "auto"
# }
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
# If defaults.namehint.showall is set to off in alsa.conf, then this is
# necessary to make this pcm show up in the list returned by
# snd_device_name_hint or aplay -L
hint.description "Default Audio Device"
}
ctl.!default {
type pulse
}!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47'
Mixer name : 'Realtek ALC3226'
Components : 'HDA:10ec0292,102805ca,00100001'
Controls : 29
Simple ctrls : 15
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 64 [74%] [-17.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker+LO',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB]
Front Right: Playback 87 [100%] [0.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Line Out',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [on]
Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker'
Item0: 'Line Out+Speaker'
Simple mixer control 'Dock Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Headset Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Headset Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Speaker+LO Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Line Out Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Dock Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.7 {
iface MIXER
name 'Dock Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Headset Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.9 {
iface MIXER
name 'Headset Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Auto-Mute Mode'
value 'Line Out+Speaker'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 'Speaker Only'
item.2 'Line Out+Speaker'
}
}
control.11 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Dock Mic'
item.1 'Headset Mic'
item.2 'Internal Mic'
}
}
control.12 {
iface MIXER
name 'Capture Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
}
}
control.13 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.14 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.15 {
iface MIXER
name 'Headset Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.16 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 1
value.1 1
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
}
}
control.17 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -1725
}
}
control.18 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface CARD
name 'Headset Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.21 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.22 {
iface CARD
name 'Dock Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Front Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.24 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.26 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.27 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.28 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
msrcpufreq_stats
ctr
ccmbinfmt_misc
bnep
nfsdauth_rpcgssoid_registrynfs_acl
nfs
lockd
grace
fscache
sunrpcnls_utf8nls_cp437
vfat
fat
arc4
joydevqmi_wwancdc_mbim
btusb
btintelintel_rapliosf_mbicdc_ncm
bluetoothcdc_wdmx86_pkg_temp_thermalintel_powerclamp
usbnet
pcspkr
miitpm_tis
iwlmvm
mac80211
8250serial_core
iwlwifisnd_hda_codec_hdmi
psmousesnd_hda_codec_realtek
cfg80211
efivarsserio_rawsnd_hda_codec_generichid_multitouchi2c_i801
battery
acsnd_hda_intelsnd_hda_controllersnd_hda_codecsnd_hwdepsnd_hda_core
evdevsnd_pcmsnd_timer
processormd_modtpm_rng
tpmrng_core
fuse
autofs4algif_skcipheraf_alghid_generic
usbhidcrct10dif_pclmulcrc32_pclmulcrc32c_intelghash_clmulni_intel
sgehci_pcisdhci_pciehci_hcdxhci_pcixhci_hcd
thermalsdhci_acpi
sdhcimmc_corei2c_hid
hid
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x05 0x185600100x06 0x185600100x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:0x12 0x90a601400x13 0x411111f00x14 0x901701100x15 0x0221401f0x16 0x010140200x18 0x411111f00x19 0x01a190300x1a 0x411111f00x1b 0x411111f00x1d 0x407000010x1e 0x411111f0
/sys/class/sound/hwC1D0/driver_pin_configs:0x16 0x210140200x19 0x21a190300x1a 0x01a1913c
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
At Wed, 29 Apr 2015 12:28:59 +0100,
Quoted 49 lines · Jonathan McDowell
Quoted 38 lines · Takashi Iwai
At Tue, 28 Apr 2015 15:05:20 +0200,
Quoted 36 lines · Takashi Iwai
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 33 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 10 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Quoted 8 lines
Quoted 5 lines
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give
alsa-info.shoutput on both 4.0 and 4.1.Also, does the click noise occur only at powering up, and not at powering down?
Quoted 6 lines
The click is only on the transition from suspended to active; not constantly during playback and not when transitioning from active to suspended. It doesn't appear 4.0 is doing the suspending at all; there are no
/sys/bus/hdaudio/devices/*/power/runtime_statusfiles and the cardruntime_statusis always active. alsa-info for 4.0 + 4.1-rc1 attached.
OK, thanks for clarification.
One patch you can try (with or without power_save_node disablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.
Takashi
---
include/sound/hdaudio.h +1 -0
@@ -79,6 +79,7 @@ struct hdac_device { bool lazy_cache:1; /* don't wake up for writes */ bool caps_overwriting:1; /* caps overwrite being in process */ bool cache_coef:1; /* cache COEF read/write too */ + bool cache_only:1; /* don't write actually registers */ };/* device/driver type used for matching */
sound/hda/hdac_regmap.c +3 -0
@@ -265,6 +265,9 @@ static int hda_reg_write(void *context, unsigned int reg, unsigned int val)unsigned int verb;int i, bytes, err; +if (codec->cache_only) +return 0 ; + reg &= ~0x00080000U ;/* drop GET bit */ reg |= (codec->addr <<28 ); verb =get_verb (reg);
sound/pci/hda/hda_codec.c +10 -9
@@ -3156,28 +3156,29 @@ static void hda_call_codec_resume(struct hda_codec *codec) {atomic_inc (&codec->core.in_pm); -if (codec->core.regmap) -regcache_mark_dirty (codec->core.regmap); - codec->power_jiffies = jiffies;hda_set_power_state (codec,AC_PWRST_D0 );restore_shutup_pins (codec);hda_exec_init_verbs (codec);snd_hda_jack_set_dirty_all (codec); +if (codec->core.regmap) { +regcache_mark_dirty (codec->core.regmap); + codec->core.cache_only = true; + }if (codec->patch_ops.resume) codec->patch_ops.resume (codec); -else { -if (codec->patch_ops.init) - codec->patch_ops.init (codec); -if (codec->core.regmap) -regcache_sync (codec->core.regmap); - } +else if (codec->patch_ops.init) + codec->patch_ops.init (codec);if (codec->jackpoll_interval)hda_jackpoll_work (&codec->jackpoll_work.work);else snd_hda_jack_report_sync (codec); +if (codec->core.regmap) { + codec->core.cache_only = false; +regcache_sync (codec->core.regmap); + }atomic_dec (&codec->core.in_pm); }
sound/pci/hda/hda_generic.c +0 -2
@@ -5780,8 +5780,6 @@ int snd_hda_gen_init(struct hda_codec *codec)/* call init functions of standard auto-mute helpers */ update_automute_all (codec); -regcache_sync (codec->core.regmap); -if (spec->vmaster_mute.sw_kctl && spec->vmaster_mute.hook)snd_hda_sync_vmaster_hook (&spec->vmaster_mute);
sound/pci/hda/patch_hdmi.c +0 -1
@@ -2211,7 +2211,6 @@ static int generic_hdmi_resume(struct hda_codec *codec)int pin_idx; codec->patch_ops.init (codec); -regcache_sync (codec->core.regmap);for (pin_idx =0 ; pin_idx < spec->num_pins; pin_idx++) {struct hdmi_spec_per_pin *per_pin =get_pin (spec, pin_idx);
sound/pci/hda/patch_realtek.c +0 -2
@@ -799,7 +799,6 @@ static int alc_resume(struct hda_codec *codec)if (!spec->no_depop_delay)msleep (150 );/* to avoid pop noise */ codec->patch_ops.init (codec); -regcache_sync (codec->core.regmap);hda_call_check_power_status (codec,0x01 );return 0 ; }
@@ -3059,7 +3058,6 @@ static int alc269_resume(struct hda_codec *codec)msleep (200 ); } -regcache_sync (codec->core.regmap);hda_call_check_power_status (codec,0x01 );/* on some machine, the BIOS will clear the codec gpio data when enter
Quoted 58 lines · Takashi Iwai
At Wed, 29 Apr 2015 12:28:59 +0100,
Quoted 49 lines · Jonathan McDowell
Quoted 38 lines · Takashi Iwai
At Tue, 28 Apr 2015 15:05:20 +0200,
Quoted 36 lines · Takashi Iwai
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 33 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 10 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Quoted 8 lines
Quoted 5 lines
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give
alsa-info.shoutput on both 4.0 and 4.1.Also, does the click noise occur only at powering up, and not at powering down?
Quoted 6 lines
The click is only on the transition from suspended to active; not constantly during playback and not when transitioning from active to suspended. It doesn't appear 4.0 is doing the suspending at all; there are no
/sys/bus/hdaudio/devices/*/power/runtime_statusfiles and the cardruntime_statusis always active. alsa-info for 4.0 + 4.1-rc1 attached.
Quoted 5 lines
OK, thanks for clarification.
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.
Patch alone has no effect. Patch with power_save_node disablement solves the problem. Didn't try power_save_node disablement without the patch.
J.
Signature · 2 lines
This .sig brought to you by the letter M and the number 7 Product of the Republic of HuggieTag
At Thu, 30 Apr 2015 16:01:31 +0100,
Quoted 60 lines · Jonathan McDowell
Quoted 58 lines · Takashi Iwai
At Wed, 29 Apr 2015 12:28:59 +0100,
Quoted 55 lines · Jonathan McDowell
Quoted 38 lines · Takashi Iwai
At Tue, 28 Apr 2015 15:05:20 +0200,
Quoted 36 lines · Takashi Iwai
At Tue, 28 Apr 2015 13:35:18 +0100,
Quoted 33 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
At Tue, 28 Apr 2015 12:21:57 +0100,
Quoted 10 lines · Jonathan McDowell
Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle.
System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in
sound/hda/between 4.0 + 4.1-rc1 so I'll concentrate on those first.Quoted 8 lines
There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid.
First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in
/sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status.The cracking is definitely happening with the transition from suspended to active:
/sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active
card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above.
Quoted 8 lines
Quoted 5 lines
Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals").
In anyway, please give
alsa-info.shoutput on both 4.0 and 4.1.Also, does the click noise occur only at powering up, and not at powering down?
The click is only on the transition from suspended to active; not constantly during playback and not when transitioning from active to suspended. It doesn't appear 4.0 is doing the suspending at all; there are no
/sys/bus/hdaudio/devices/*/power/runtime_statusfiles and the cardruntime_statusis always active. alsa-info for 4.0 + 4.1-rc1 attached.
Quoted 8 lines
Quoted 5 lines
OK, thanks for clarification.
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.Patch alone has no effect. Patch with
power_save_nodedisablement solves the problem. Didn't trypower_save_nodedisablement without the patch.
Then please confirm that only power_save_node disablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found.
thanks,
Takashi
Quoted 9 lines · Takashi Iwai
Quoted 8 lines · Jonathan McDowell
Quoted 5 lines · Takashi Iwai
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.
Quoted 7 lines
Quoted 3 lines
Patch alone has no effect. Patch with
power_save_nodedisablement solves the problem. Didn't trypower_save_nodedisablement without the patch.Then please confirm that only
power_save_nodedisablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found.
Setting codec->power_save_node to 0 in patch_alc269 is sufficient; no noticeable cracking occurring.
J.
Signature · 1 line
Beware of programmers carrying screwdrivers.
At Sat, 2 May 2015 16:05:13 +0100,
Quoted 15 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Jonathan McDowell
Quoted 5 lines · Takashi Iwai
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.Patch alone has no effect. Patch with
power_save_nodedisablement solves the problem. Didn't trypower_save_nodedisablement without the patch.
Quoted 6 lines
Quoted 3 lines
Then please confirm that only
power_save_nodedisablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found.Setting
codec->power_save_nodeto 0 inpatch_alc269is sufficient; no noticeable cracking occurring.
Does the patch below have any improvement?
Takashi
---
sound/pci/hda/hda_generic.c +11 -3
@@ -841,11 +841,19 @@ static hda_nid_t path_power_update(struct hda_codec *codec,else state =AC_PWRST_D3 ;if (!snd_hda_check_power_state (codec, nid, state)) { -snd_hda_codec_write (codec, nid,0 , +snd_hda_codec_read (codec, nid,0 ,AC_VERB_SET_POWER_STATE , state); changed = nid; -if (state ==AC_PWRST_D0 ) -snd_hdac_regmap_sync_node (&codec->core, nid); +if (state ==AC_PWRST_D0 ) { +msleep (10 ); +/* all known codecs seem to be capable to handle +* widgets state even in D3, so far. +* if any new codecs need to restore the widget +* states after D0 transition, call the function +* below. +*/ +/* snd_hdac_regmap_sync_node(&codec->core, nid); */ + } } }return changed;
Quoted 17 lines · Takashi Iwai
At Sat, 2 May 2015 16:05:13 +0100,
Quoted 15 lines · Jonathan McDowell
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Jonathan McDowell
Quoted 5 lines · Takashi Iwai
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.Patch alone has no effect. Patch with
power_save_nodedisablement solves the problem. Didn't trypower_save_nodedisablement without the patch.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Then please confirm that only
power_save_nodedisablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found.Setting
codec->power_save_nodeto 0 inpatch_alc269is sufficient; no noticeable cracking occurring.Does the patch below have any improvement?
I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4.
J.
Signature · 4 lines
101 things you can't have too | .''`. Debian GNU/Linux Developer
much of : 9 - Processing power. | : :' : Happy to accept PGP signed
| `. `' or encrypted mail - RSA
| `- key on the keyservers.At Tue, 19 May 2015 17:19:11 +0100,
Quoted 23 lines · Jonathan McDowell
Quoted 21 lines · Takashi Iwai
At Sat, 2 May 2015 16:05:13 +0100,
Quoted 19 lines · Jonathan McDowell
Quoted 16 lines · Takashi Iwai
Quoted 11 lines · Jonathan McDowell
Quoted 5 lines · Takashi Iwai
One patch you can try (with or without
power_save_nodedisablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior.Patch alone has no effect. Patch with
power_save_nodedisablement solves the problem. Didn't trypower_save_nodedisablement without the patch.Then please confirm that only
power_save_nodedisablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Setting
codec->power_save_nodeto 0 inpatch_alc269is sufficient; no noticeable cracking occurring.Does the patch below have any improvement?
I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4.
OK, just to be sure, could you check whether changing msleep(10) to msleep(100) makes no difference? Also put a line like
pr_info("XXX power up %x\n", nid);after msleep() call to see which nodes are powered up dynamically.
Takashi
Quoted 6 lines · Takashi Iwai
At Tue, 19 May 2015 17:19:11 +0100,
Quoted 4 lines · Jonathan McDowell
Quoted 1 line · Takashi Iwai
Does the patch below have any improvement?
Quoted 7 lines
Quoted 2 lines
I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4.
OK, just to be sure, could you check whether changing msleep(10) to msleep(100) makes no difference? Also put a line like
pr_info("XXX power up %x\n", nid);after
msleep()call to see which nodes are powered up dynamically.
Increasing the delay, if anything, makes the crackle when powering up seem a little longer. dmesg log looks like:
[ 4206.075557] XXX power up 2 [ 4206.179671] XXX power up 14 [ 4206.291758] XXX power up 3
J.
Signature · 4 lines
xmpp:[email protected] "f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng." -- Simon Cozens, ox.os.linux
At Tue, 19 May 2015 22:53:10 +0100,
Quoted 16 lines · Jonathan McDowell
Quoted 6 lines · Takashi Iwai
At Tue, 19 May 2015 17:19:11 +0100,
Quoted 4 lines · Jonathan McDowell
Quoted 1 line · Takashi Iwai
Does the patch below have any improvement?
Quoted 7 lines
Quoted 2 lines
I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4.
OK, just to be sure, could you check whether changing msleep(10) to msleep(100) makes no difference? Also put a line like
pr_info("XXX power up %x\n", nid);after
msleep()call to see which nodes are powered up dynamically.
Quoted 6 lines
Increasing the delay, if anything, makes the crackle when powering up seem a little longer. dmesg log looks like:
[ 4206.075557] XXX power up 2 [ 4206.179671] XXX power up 14 [ 4206.291758] XXX power up 3
OK, so everything looks correct, but the codec (or the machine) seems leading to the noise when a branched path is activated while the pin was already powered up. Then let's disable the widget power-saving for these codecs.
Could you confirm that the patch below works?
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co
We've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +2 -1
@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);
Signature · 1 line
2.4.1
Quoted 25 lines · Takashi Iwai
At Tue, 19 May 2015 22:53:10 +0100,
Quoted 16 lines · Jonathan McDowell
Quoted 6 lines · Takashi Iwai
At Tue, 19 May 2015 17:19:11 +0100,
Quoted 4 lines · Jonathan McDowell
Quoted 1 line · Takashi Iwai
Does the patch below have any improvement?
Quoted 7 lines
Quoted 2 lines
I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4.
OK, just to be sure, could you check whether changing msleep(10) to msleep(100) makes no difference? Also put a line like
pr_info("XXX power up %x\n", nid);after
msleep()call to see which nodes are powered up dynamically.Quoted 6 lines
Increasing the delay, if anything, makes the crackle when powering up seem a little longer. dmesg log looks like:
[ 4206.075557] XXX power up 2 [ 4206.179671] XXX power up 14 [ 4206.291758] XXX power up 3
Quoted 6 lines
OK, so everything looks correct, but the codec (or the machine) seems leading to the noise when a branched path is activated while the pin was already powered up. Then let's disable the widget power-saving for these codecs.
Could you confirm that the patch below works?
4.1-rc4 + patch below running all day without hearing any crackles. Sounds good to me.
Quoted 24 lines
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);
J.
Signature · 4 lines
] http://www.earth.li/~noodles/ [] Sex, truth and jellibabies. [ ] PGP/GPG Key @ the.earth.li [] [ ] via keyserver, web or email. [] [ ] RSA: 4096/2DA8B985 [] [
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);
I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
4.0.4 was fine.
Signature · 1 line
Mihai Donțu
At Wed, 10 Jun 2015 13:17:55 +0300,
Quoted 47 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Takashi
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Signature · 1 line
Mihai Donțu
At Wed, 10 Jun 2015 13:41:35 +0300,
Quoted 56 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c +2 -0
@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }
Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
$ pulseaudio -k
will spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (/etc/init.d/alsasound) did not trigger the problem either.
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
Signature · 5 lines
Mihai Donțu _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 10 Jun 2015 14:45:51 +0300,
Quoted 90 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 6 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 10 Jun 2015 14:33:42 +0200,
Quoted 106 lines · Takashi Iwai
At Wed, 10 Jun 2015 14:45:51 +0300,
Quoted 90 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 4 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.
Quoted 5 lines
Quoted 2 lines
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific.
thanks,
Takashi
---
sound/pci/hda/patch_realtek.c +3 -1
@@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) +if (codec->core.vendor_id ==0x10ec0292 ) +msleep (100 );/* for avoiding click noise at power up */ +else codec->power_save_node =1 ; snd_hda_pick_fixup(codec, alc269_fixup_models,
Quoted 120 lines · On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote:
Quoted 103 lines · Takashi Iwai
Quoted 89 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 4 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.Quoted 5 lines
Quoted 2 lines
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific.
---
sound/pci/hda/patch_realtek.c +0
-0
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5645
Quoted 10 lines
sound/pci/hda/patch_realtek.c +3
-1@@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) +if (codec->core.vendor_id ==0x10ec0292 ) +msleep (100 );/* for avoiding click noise at power up */ +else codec->power_save_node =1 ; snd_hda_pick_fixup(codec, alc269_fixup_models,
The initial patch but with msleep(10), works OK. This new one, however, does not (with 100ms or 10ms).
Signature · 5 lines
Mihai Donțu _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 10 Jun 2015 19:22:02 +0300,
Quoted 131 lines · Mihai Donțu
Quoted 129 lines · On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote:
Quoted 103 lines · Takashi Iwai
Quoted 89 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 4 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.Quoted 5 lines
Quoted 2 lines
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific.
---
sound/pci/hda/patch_realtek.c +3
-1@@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) +if (codec->core.vendor_id ==0x10ec0292 ) +msleep (100 );/* for avoiding click noise at power up */ +else codec->power_save_node =1 ;
Quoted 4 lines
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5645
Quoted 1 line
sound/pci/hda/patch_realtek.c +0
-0snd_hda_pick_fixup(codec, alc269_fixup_models,The initial patch but with msleep(10), works OK. This new one, however, does not (with 100ms or 10ms).
Hmm, could you make sure that the sleep is actually called, e.g. by adding a debug print or such? I blindly assumed that your codec is as same as Joanathan's (vendor id 0x10ec0292). You can check /proc/asound/card*/codec#* files, too.
Takashi
Quoted 136 lines · On Wed, 10 Jun 2015 18:27:23 +0200 Takashi Iwai wrote:
Quoted 130 lines · Mihai Donțu
Quoted 129 lines · On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote:
Quoted 103 lines · Takashi Iwai
Quoted 89 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 4 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.Quoted 5 lines
Quoted 2 lines
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific.
---
sound/pci/hda/patch_realtek.c +3
-1@@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) +if (codec->core.vendor_id ==0x10ec0292 ) +msleep (100 );/* for avoiding click noise at power up */ +else codec->power_save_node =1 ;Quoted 4 lines
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5645
Quoted 1 line
sound/pci/hda/patch_realtek.c +0
-0snd_hda_pick_fixup(codec, alc269_fixup_models,The initial patch but with msleep(10), works OK. This new one, however, does not (with 100ms or 10ms).
Quoted 4 lines
Hmm, could you make sure that the sleep is actually called, e.g. by adding a debug print or such? I blindly assumed that your codec is as same as Joanathan's (vendor id
0x10ec0292). You can check /proc/asound/card*/codec#* files, too.
I added some printk-s:
[Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: vendor_id: 0x10ec0292 [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: sleeping for 100ms
The code above runs some good seconds before pulseaudio starts and triggers the clicks. Even before rootfs is re-mounted rw.
Signature · 5 lines
Mihai Donțu _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 10 Jun 2015 19:43:03 +0300,
Quoted 143 lines · Mihai Donțu
Quoted 136 lines · On Wed, 10 Jun 2015 18:27:23 +0200 Takashi Iwai wrote:
Quoted 130 lines · Mihai Donțu
Quoted 129 lines · On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote:
Quoted 103 lines · Takashi Iwai
Quoted 89 lines · Mihai Donțu
Quoted 76 lines · On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote:
Quoted 55 lines · Mihai Donțu
Quoted 47 lines · On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote:
Quoted 46 lines · Mihai Donțu
Quoted 22 lines · On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & coWe've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by Jonathan McDowell <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/pci/hda/patch_realtek.c +0
-0sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5630
Quoted 9 lines
sound/pci/hda/patch_realtek.c +2
-1@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; - codec->power_save_node =1 ; +if (codec->core.vendor_id !=0x10ec0292 ) + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440):
[ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12Quoted 6 lines
Quoted 1 line
4.0.4 was fine.
Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem.
Quoted 6 lines
Only at power up. I've also suspend-resumed twice and can confirm it's OK.
There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it.
Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3?
Last but not least, a patch like below has any effect?
Takashi
---
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3084
Quoted 8 lines
sound/pci/hda/hda_codec.c +2
-0@@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (100 );return state; }Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio.
Quoted 5 lines
$ pulseaudio -kwill spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away.
Hm. It's a bit inconsistent, but still this can be only at the full power up sequence.
Quoted 4 lines
telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (
/etc/init.d/alsasound) did not trigger the problem either.Quoted 5 lines
Quoted 2 lines
However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-)
OK, could you try to reduce the sleep value from 100 to 10? Does it still work?
... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific.
---
sound/pci/hda/patch_realtek.c +3
-1@@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) +if (codec->core.vendor_id ==0x10ec0292 ) +msleep (100 );/* for avoiding click noise at power up */ +else codec->power_save_node =1 ;Quoted 4 lines
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5645
Quoted 1 line
sound/pci/hda/patch_realtek.c +0
-0snd_hda_pick_fixup(codec, alc269_fixup_models,The initial patch but with msleep(10), works OK. This new one, however, does not (with 100ms or 10ms).
Quoted 4 lines
Hmm, could you make sure that the sleep is actually called, e.g. by adding a debug print or such? I blindly assumed that your codec is as same as Joanathan's (vendor id
0x10ec0292). You can check /proc/asound/card*/codec#* files, too.
Quoted 7 lines
I added some printk-s:
[Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: vendor_id: 0x10ec0292 [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: sleeping for 100msThe code above runs some good seconds before pulseaudio starts and triggers the clicks. Even before rootfs is re-mounted rw.
OK, then it's really needed to be right after the power transition. To be sure, below is the patch I'm going to apply. If it really works, please give you tested-by tag.
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Reduce click noise at power up
Some machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition.
There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup.
--- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+)
sound/pci/hda/hda_codec.c +3 -0
@@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (10 ); +return state; }
Signature · 1 line
2.4.3
Quoted 24 lines · On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Reduce click noise at power upSome machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition.
There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup.
Reported-by Mihai Donțu <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+)sound/pci/hda/hda_codec.c +0
-0
sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3085
Quoted 9 lines
sound/pci/hda/hda_codec.c +3
-0@@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (10 ); +return state; }
I take back my previous observations. I was at work and did not have access to headphones (one of those days). Now I'm at home, it's 1 AM, very quiet, and I notice the following:
* on speakers: the click reproduces but with _very_ low amplitude; msleep(100) is unnoticeable, but msleep(10) is, barely;
* on headphones: the moment I plug them I hear a loud static sound (like an old, untuned AM radio). If I play something, the static disappears. If I pause, the static returns after ~15s.
Signature · 1 line
Mihai Donțu
At Thu, 11 Jun 2015 01:12:36 +0300,
Quoted 40 lines · Mihai Donțu
Quoted 24 lines · On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Reduce click noise at power upSome machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition.
There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup.
Reported-by Mihai Donțu <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+)sound/pci/hda/hda_codec.c +0
-0sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3085
Quoted 9 lines
sound/pci/hda/hda_codec.c +3
-0@@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (10 ); +return state; }I take back my previous observations. I was at work and did not have access to headphones (one of those days). Now I'm at home, it's 1 AM, very quiet, and I notice the following:
Quoted 5 lines
* on speakers: the click reproduces but with _very_ low amplitude; msleep(100) is unnoticeable, but msleep(10) is, barely;
* on headphones: the moment I plug them I hear a loud static sound (like an old, untuned AM radio). If I play something, the static disappears. If I pause, the static returns after ~15s.
OK, then the patch is no-go. We need a bit deeper analysis.
About the headphone problem: don't you get the same issue with 4.0.x? Please take alsa-info.sh outputs on both 4.0.x and 4.1 before and after plugging the headphone, and attach the outputs.
(Run the script with --no-upload option.)
thanks,
Takashi
Quoted 46 lines · On Thu, 11 Jun 2015 07:01:13 +0200 Takashi Iwai wrote:
Quoted 39 lines · Mihai Donțu
Quoted 24 lines · On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Reduce click noise at power upSome machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition.
There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup.
Reported-by Mihai Donțu <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+)sound/pci/hda/hda_codec.c +0
-0sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3085
Quoted 9 lines
sound/pci/hda/hda_codec.c +3
-0@@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (10 ); +return state; }I take back my previous observations. I was at work and did not have access to headphones (one of those days). Now I'm at home, it's 1 AM, very quiet, and I notice the following:
Quoted 5 lines
* on speakers: the click reproduces but with _very_ low amplitude; msleep(100) is unnoticeable, but msleep(10) is, barely;
* on headphones: the moment I plug them I hear a loud static sound (like an old, untuned AM radio). If I play something, the static disappears. If I pause, the static returns after ~15s.
Quoted 6 lines
OK, then the patch is no-go. We need a bit deeper analysis.
About the headphone problem: don't you get the same issue with 4.0.x? Please take
alsa-info.shoutputs on both 4.0.x and 4.1 before and after plugging the headphone, and attach the outputs.
(Run the script with --no-upload option.)
No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by alsa-info.sh.
Thanks,
Signature · 1 line
Mihai Donțu
At Fri, 12 Jun 2015 01:23:18 +0300,
Quoted 50 lines · Mihai Donțu
Quoted 48 lines · On Thu, 11 Jun 2015 07:01:13 +0200 Takashi Iwai wrote:
Quoted 39 lines · Mihai Donțu
Quoted 24 lines · On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote:
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Reduce click noise at power upSome machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition.
There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup.
Reported-by Mihai Donțu <[email protected]>Signed-off-by Takashi Iwai <[email protected]>--- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+)sound/pci/hda/hda_codec.c +0
-0sound/pci/hda/hda_codec.c static unsigned int hda_set_power_state(struct hda_codec *codec, · line 3085
Quoted 9 lines
sound/pci/hda/hda_codec.c +3
-0@@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec,break ; } +if (power_state ==AC_PWRST_D0 ) +msleep (10 ); +return state; }I take back my previous observations. I was at work and did not have access to headphones (one of those days). Now I'm at home, it's 1 AM, very quiet, and I notice the following:
Quoted 5 lines
* on speakers: the click reproduces but with _very_ low amplitude; msleep(100) is unnoticeable, but msleep(10) is, barely;
* on headphones: the moment I plug them I hear a loud static sound (like an old, untuned AM radio). If I play something, the static disappears. If I pause, the static returns after ~15s.OK, then the patch is no-go. We need a bit deeper analysis.
Quoted 7 lines
Quoted 4 lines
About the headphone problem: don't you get the same issue with 4.0.x? Please take
alsa-info.shoutputs on both 4.0.x and 4.1 before and after plugging the headphone, and attach the outputs.
(Run the script with --no-upload option.)No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by
alsa-info.sh.
Both are taken in different states (one is headphone plugged and another unplugged?). At best, take the snapshot in the same situation for comparison.
In anyway, below is another shot in dark. The white noise is possibly the ill side effect of analog loopback. But it's strange that this didn't happen on 4.0.x. And, it combines another black magic that worked for another Dell model. Let's see.
Takashi
---
sound/pci/hda/patch_realtek.c +13 -0
@@ -4522,6 +4522,8 @@ enum {ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 ,ALC298_FIXUP_DELL1_MIC_NO_PRESENCE , +ALC292_FIXUP_DELL_E74 , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {
@@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_HEADSET_MODE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E74] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E74 ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
Quoted 48 lines · On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote:
Quoted 2 lines · Mihai Donțu
No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by
alsa-info.sh.Both are taken in different states (one is headphone plugged and another unplugged?). At best, take the snapshot in the same situation for comparison.
In anyway, below is another shot in dark. The white noise is possibly the ill side effect of analog loopback. But it's strange that this didn't happen on 4.0.x. And, it combines another black magic that worked for another Dell model. Let's see.
Takashi
---
sound/pci/hda/patch_realtek.c +12
-0@@ -4522,6 +4522,8 @@ enum {ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 ,ALC298_FIXUP_DELL1_MIC_NO_PRESENCE , +ALC292_FIXUP_DELL_E74 , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {@@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_HEADSET_MODE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E74] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };static const struct snd_pci_quirk alc269_fixup_tbl[] = {
sound/pci/hda/patch_realtek.c static const struct snd_pci_quirk alc269_fixup_tbl[] = { · line 5084
Quoted 7 lines
sound/pci/hda/patch_realtek.c +1
-0@@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E74 ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
Nice shot! It appears to work. :-) No clicks, no static.
I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken.
Oh, and yes, the second state is without headphones on. I removed them without thinking when the noise started. Sorry about that.
Thanks!
Signature · 1 line
Mihai Donțu
At Fri, 12 Jun 2015 12:45:23 +0300,
Quoted 48 lines · Mihai Donțu
Quoted 46 lines · On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote:
Quoted 2 lines · Mihai Donțu
No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by
alsa-info.sh.Both are taken in different states (one is headphone plugged and another unplugged?). At best, take the snapshot in the same situation for comparison.
In anyway, below is another shot in dark. The white noise is possibly the ill side effect of analog loopback. But it's strange that this didn't happen on 4.0.x. And, it combines another black magic that worked for another Dell model. Let's see.
Takashi
---
sound/pci/hda/patch_realtek.c +12
-0@@ -4522,6 +4522,8 @@ enum {ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 ,ALC298_FIXUP_DELL1_MIC_NO_PRESENCE , +ALC292_FIXUP_DELL_E74 , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {@@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_HEADSET_MODE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E74] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };
Quoted 11 lines
sound/pci/hda/patch_realtek.c static const struct snd_pci_quirk alc269_fixup_tbl[] = { · line 5084
Quoted 9 lines
sound/pci/hda/patch_realtek.c +1
-0static const struct snd_pci_quirk alc269_fixup_tbl[] = {@@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E74 ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),Nice shot! It appears to work. :-) No clicks, no static.
Good to hear!
Quoted 3 lines
I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken.
While we are at it: could you try to enable codec->power_save_node in patch_alc269() (while keeping the new patch)?
sound/pci/hda/patch_realtek.c +1 -2
@@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;#ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend;
This was the workaround for Jonathan's machine, but maybe the new workaround is good enough. After changing this, try to enable the power save by writing like
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
and start/stop playing something.
thanks,
Takashi
At Fri, 12 Jun 2015 12:09:55 +0200,
Quoted 75 lines · Takashi Iwai
At Fri, 12 Jun 2015 12:45:23 +0300,
Quoted 48 lines · Mihai Donțu
Quoted 46 lines · On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote:
Quoted 2 lines · Mihai Donțu
No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by
alsa-info.sh.Both are taken in different states (one is headphone plugged and another unplugged?). At best, take the snapshot in the same situation for comparison.
In anyway, below is another shot in dark. The white noise is possibly the ill side effect of analog loopback. But it's strange that this didn't happen on 4.0.x. And, it combines another black magic that worked for another Dell model. Let's see.
Takashi
---
sound/pci/hda/patch_realtek.c +12
-0@@ -4522,6 +4522,8 @@ enum {ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 ,ALC298_FIXUP_DELL1_MIC_NO_PRESENCE , +ALC292_FIXUP_DELL_E74 , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {@@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_HEADSET_MODE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E74] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };Quoted 11 lines
sound/pci/hda/patch_realtek.c static const struct snd_pci_quirk alc269_fixup_tbl[] = { · line 5084
Quoted 9 lines
sound/pci/hda/patch_realtek.c +1
-0static const struct snd_pci_quirk alc269_fixup_tbl[] = {@@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E74 ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),Nice shot! It appears to work. :-) No clicks, no static.
Good to hear!
Quoted 3 lines
I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken.
While we are at it: could you try to enable
codec->power_save_nodeinpatch_alc269()(while keeping the new patch)?
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5677
Quoted 9 lines
sound/pci/hda/patch_realtek.c +1
-2@@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;#ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend;
For your convenience, below is the combined patch for 4.1.
Jonathan, could you also try this patch and see whether you still get the noise?
thanks,
Takashi
---
sound/pci/hda/patch_realtek.c +15 -2
@@ -4515,6 +4515,8 @@ enum {ALC288_FIXUP_DELL_HEADSET_MODE ,ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 , +ALC292_FIXUP_DELL_E7X , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {
@@ -5037,6 +5039,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC288_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E7X] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -5049,6 +5061,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05ca ,"Dell Latitude E7240" ,ALC292_FIXUP_DELL_E7X ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E7X ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
@@ -5637,8 +5651,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);
Quoted 46 lines · On Fri, 12 Jun 2015 16:13:16 +0200 Takashi Iwai wrote:
For your convenience, below is the combined patch for 4.1.
Jonathan, could you also try this patch and see whether you still get the noise?
---
sound/pci/hda/patch_realtek.c +14
-0@@ -4515,6 +4515,8 @@ enum {ALC288_FIXUP_DELL_HEADSET_MODE ,ALC288_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC288_FIXUP_DELL_XPS_13_GPIO6 , +ALC292_FIXUP_DELL_E7X , + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = {@@ -5037,6 +5039,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC288_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E7X] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id =ALC292_FIXUP_DISABLE_AAMIX + }, };static const struct snd_pci_quirk alc269_fixup_tbl[] = {@@ -5049,6 +5061,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x1025 ,0x0775 ,"Acer Aspire E1-572" ,ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572 ),SND_PCI_QUIRK (0x1025 ,0x079b ,"Acer Aspire V5-573G" ,ALC282_FIXUP_ASPIRE_V5_PINS ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), +SND_PCI_QUIRK (0x1028 ,0x05ca ,"Dell Latitude E7240" ,ALC292_FIXUP_DELL_E7X ), +SND_PCI_QUIRK (0x1028 ,0x05cb ,"Dell Latitude E7440" ,ALC292_FIXUP_DELL_E7X ),SND_PCI_QUIRK (0x1028 ,0x05da ,"Dell Vostro 5460" ,ALC290_FIXUP_SUBWOOFER ),SND_PCI_QUIRK (0x1028 ,0x05f4 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5657
Quoted 9 lines
sound/pci/hda/patch_realtek.c +1
-2@@ -5637,8 +5651,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;snd_hda_pick_fixup (codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups);
This patch works fine for me. You can add my Tested-by when you re-spin it for Linus and if Jonathan is happy as well.
Thank you!
Signature · 1 line
Mihai Donțu
Quoted 25 lines · Takashi Iwai
At Fri, 12 Jun 2015 12:09:55 +0200,
Quoted 23 lines · Takashi Iwai
At Fri, 12 Jun 2015 12:45:23 +0300,
Quoted 1 line · Mihai Donțu
Nice shot! It appears to work. :-) No clicks, no static.
Good to hear!
Quoted 3 lines
I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken.
While we are at it: could you try to enable
codec->power_save_nodeinpatch_alc269()(while keeping the new patch)?sound/pci/hda/patch_realtek.c +1
-2@@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;
Quoted 7 lines
sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5677
Quoted 2 lines
sound/pci/hda/patch_realtek.c +0
-0#ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend;For your convenience, below is the combined patch for 4.1.
Jonathan, could you also try this patch and see whether you still get the noise?
Applying the combined patch to 4.1-rc7 I'm not getting any noise on the transition from suspended to active.
J.
Signature · 8 lines
101 things you can't have too | .''`. Debian GNU/Linux Developer
much of : 47 - More coffee. | : :' : Happy to accept PGP signed
| `. `' or encrypted mail - RSA
| `- key on the keyservers.
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-develAt Sun, 14 Jun 2015 13:24:20 +0100,
Quoted 32 lines · Jonathan McDowell
Quoted 30 lines · Takashi Iwai
At Fri, 12 Jun 2015 12:09:55 +0200,
Quoted 16 lines · Takashi Iwai
At Fri, 12 Jun 2015 12:45:23 +0300,
Quoted 1 line · Mihai Donțu
Nice shot! It appears to work. :-) No clicks, no static.
Good to hear!
Quoted 3 lines
I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken.
While we are at it: could you try to enable
codec->power_save_nodeinpatch_alc269()(while keeping the new patch)?sound/pci/hda/patch_realtek.c static int patch_alc269(struct hda_codec *codec) · line 5677
Quoted 9 lines
sound/pci/hda/patch_realtek.c +1
-2@@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin =0x18 ; -if (codec->core.vendor_id !=0x10ec0292 ) - codec->power_save_node =1 ; + codec->power_save_node =1 ;#ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend;For your convenience, below is the combined patch for 4.1.
Quoted 5 lines
Quoted 2 lines
Jonathan, could you also try this patch and see whether you still get the noise?
Applying the combined patch to 4.1-rc7 I'm not getting any noise on the transition from suspended to active.
Great, I queued the fix patch for 4.1-final now.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel